Search NASA⌕ Search

SEARCH · Search NASA

Results for “Methanol conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Harnessing ketones as hydrogen acceptors for atom-efficient upgrading of oxygenates to fuels over H/ZSM-5

Heterogeneous mixtures of bio-derived oxygenates are promising feedstocks for synthetic aviation fuel (SAF), but conversion strategies for one common component—short-chain (C 5–7 ) internal ketones—are lacking. Previous work has shown that cyclization of ketones over H/ZSM-5 is limited by its high productivity of light paraffins. We study 4-heptanone upgrading over H/ZSM-5 and show that aromatics and olefins can be formed at high carbon yield when operating at up to 90% conversion. The yield of desirable products is not impacted by the introduction of a recycle stream of the unconverted 4-heptanone and other products with similar boiling points. We hypothesize, based on first-principles calculations, that the higher olefin yield is driven by the ease of hydrogen transfer to unreacted ketones as opposed to hydrogenating olefin products. We demonstrate how this ease of hydrogen transfer to ketones can be leveraged to enhance olefin selectivity in the conversion of methanol to olefins as well by co-feeding ketones. Olefinic products of the cyclization reaction are then oligomerized to a SAF blendstock to demonstrate an end-to-end ketone-to-SAF process facilitated by upgrading ketones over H/ZSM-5 at partial conversion with a recycle stream. The results of this work demonstrate a strategy to improve the carbon yield from bio-derived acids to SAF to over 75%, representing a relative improvement of more than 50% compared to previously reported data.

08 HYDROGEN↗
NASA NTRS1997

Commercialization of a Direct Methanol Fuel Cell System

This paper describes a major breakthrough in energy technology developed at the Jet Propulsion Laboratory that can be used in a wide variety of portable, remote, and transportation applications without polluting the environment. The status, performance, and design considerations of the JPL non-polluting, direct methanol, fuel cell system for consumer equipment and transportation applications are reported herein. This new fuel cell technology utilizes the direct oxidation of a 3 percent aqueous liquid methanol solution as the fuel and air (O&sub2;) as the oxidant. The only products are CO&sub2; and water. Therefore, because recharging can be accomplished by refueling with methanol, vehicles can enjoy unlimited range and extended use compared to battery operated devices requiring recharging time and power accessibility.

fuel↗
DOE OSTI2021

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Interaction of methanol with a layered α-Sn(IV) phosphate on its surface: A solid-state NMR study

Here, a layered crystalline phosphate, α-Sn(HPO 4 ) 2 ·H 2 O, treated with CD 3 OD was characterized by the 31 P, 119 Sn, 1 H and 2 H solid-state NMR techniques. The 2 H solid-echo MAS NMR spectra of the product have unexpectedly revealed deuterated hydronium ions on the surface of this material instead of intercalated methanol. According to the 13 C NMR and GC–MS studies, these ions are formed by water molecules following a dehydration of the methanol-d 4 to yield deuterated dimethyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective Conversion of CO 2 to Methanol on a In 2 O 3– x –TiO 2 (110) Interface: Importance of Oxide–Oxide Interactions

Methanol is a strategic energy vector for the storage and delivery of energy and is a widely used precursor for the synthesis of many high-value chemicals. The hydrogenation of carbon dioxide (CO 2 ) into methanol is a key process in industrial operations. Here, in this study, we show that an oxide-oxide interface generated by a low loading (0.15 ML) of In 2 O 3-x on a TiO 2 (110) substrate has a high activity and selectivity as a catalyst for the CO 2 + 3H 2 → CH 3 OH + H 2 O process. The properties of the In 2 O 3-x -TiO 2 interface under reaction conditions were investigated using a combination of synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS), temperature programmed desorption (TPD), and catalytic testing. The In 2 O 3-x overlayer spread out on top of the titania and was rich in defects and O vacancies that activated CO 2 and H 2 as reactants, without destroying CH 3 O and CH 3 OH as reaction products. The In 2 O 3-x /TiO 2 (110) catalyst is at least one order of magnitude more active than bulk indium oxide while maintaining a very high selectivity (~80%) towards methanol production. Under the rich hydrogen environment of methanol synthesis, the oxide-oxide interactions allowed only a partial reduction of the In cations, preventing the formation of metal alloys as seen in the case of catalysts with metal-indium oxide interfaces. Thus, the dispersion of low loadings of In 2 O 3-x on a stable oxide substrate is a valid and low-cost approach for generating efficient catalysts for CO 2 valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Conversion of CO 2 to Methanol and Ethanol on Pt/CeO x /TiO 2 (110): Enabling Role of Water in C–C Bond Formation

The surface chemistry of alcohol synthesis from CO 2 hydrogenation has been investigated using kinetic testing, ambient pressure x-ray photoelectron spectroscopy (AP-XPS) and DFT calculations over a multicomponent system where Pt and ceria nanoparticles coexisted on a titania template, Pt/CeO x /TiO 2 (110). Due to its high ability to bind and activate CO 2 , not seen for typical Cu-ZnO catalysts, the Pt-CeO x -TiO 2 interface is excellent for the hydrogenation of CO 2 to methanol with some ethanol also being produced (21% selectivity). The results of AP-XPS and DFT calculations indicate that the active state involves a mixture of Ti 4+ /Ti 3+ , Ce 3+ and Pt 0 /Pt + . A fast pathway for the formation of CH 3 O species is only plausible when Ce 3+ and Pt are present. The addition of water to the reaction feed facilitates the first hydrogenation of CO 2 and substantially enhances the surface coverage of C-containing species (CH 3 O, HCOO, CO 3 , CH x ), facilitating the formation of C-C bonds and the production of ethanol (38% selectivity).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Detecting Cage Crossing and Filling Clusters of Magnesium and Carbon Atoms in Zeolite SSZ-13 with Atom Probe Tomography

The conversion of methanol to valuable hydrocarbon molecules is of great commercial interest, as the process serves as a sustainable alternative for the production of, for instance, the base chemicals for plastics. The reaction is catalyzed by zeolite materials. By the introduction of magnesium as a cationic metal, the properties of the zeolite, and thereby the catalytic performance, are changed. With atom probe tomography (APT), nanoscale relations within zeolite materials can be revealed: i.e., crucial information for a fundamental mechanistic understanding. We show that magnesium forms clusters within the cages of zeolite SSZ-13, while the framework elements are homogeneously distributed. These clusters of just a few nanometers were analyzed and visualized in 3-D. Magnesium atoms seem to initially be directed to the aluminum sites, after which they aggregate and fill one or two cages in the zeolite SSZ-13 structure. The presence of magnesium in zeolite SSZ-13 increases the lifetime as well as the propylene selectivity. By using operando UV–vis spectroscopy and X-ray diffraction techniques, we are able to show that these findings are related to the suppression of aromatic intermediate products, while maintaining the formation of polyaromatic compounds. Further nanoscale analysis of the spent catalysts showed indications of magnesium redistribution after catalysis. Unlike zeolite H-SSZ-13, for which only a homogeneous distribution of carbon was found, carbon can be either homogeneously or heterogeneously distributed within zeolite Mg-SSZ-13 crystals as the magnesium decreases the coking rate. Carbon clusters were isolated, visualized, and analyzed and were assumed to be polyaromatic compounds. Small one-cage-filling polyaromatic compounds were identified; furthermore, large-cage-crossing aromatic molecules were found by isolating large coke clusters, demonstrating the unique coking mechanism in zeolite SSZ-13. Short-length-scale evidence for the formation of polyaromatic compounds at acid sites is discovered, as clear nanoscale relations between aluminum and carbon atoms exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Exploring Electrocatalysis of Methane on Transition Metal Surfaces (Final Technical Report)

The original primary objective of this project focused on detailed and systematic molecular-level mechanistic studies of low-temperature (~100 °C) electrochemical (EC) direct methane-to-methanol (DMTM) conversion on selected transition metal surfaces. The latter include PtRu, PdAu, and NiCu electrocatalysts. Specifically, the proposed studies aimed to test a bifunctional hypothetical DMTM reaction mechanism on these electrocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Integrated capture and conversion of CO 2 to methanol or methanol and glycol

A process for producing methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.

Kothandaraman, Jotheeswari↗
DOE OSTI2022

Partial oxidation of methane to methanol on boron nitride at near critical acetonitrile

Abstract Direct catalytic conversion of methane to methanol with O 2 has been a fundamental challenge in unlocking abundant natural gas supplies. Metal-free methane conversion with 17% methanol yield based on the limiting reagent O 2 at 275 °C was achieved with near supercritical acetonitrile in the presence of boron nitride. Reaction temperature, catalyst loading, dwell time, methane–oxygen molar ratio, and solvent-oxygen molar ratios were identified as critical factors controlling methane activation and the methanol yield. Extension of the study to ethane (C2) showed moderate yields of methanol (3.6%) and ethanol (4.5%).

03 NATURAL GAS↗
NASA NTRS1982

Vehicle conversion to hybrid gasoline/alternative fuel operation

The alternative fuels considered are compressed natural gas (CNG), liquefied natural gas (LNG), liquid petroleum gas (LPG), and methanol; vehicles were required to operate in a hybrid or dual-fuel gasoline/alternative fuel mode. Economic feasibility was determined by comparing the costs of continued use of gasoline fuel with the use of alternative fuel and retrofitted equipment. Differences in the amounts of future expenditures are adjusted by means of a total life-cycle costing. All fuels studied are technically feasible to allow a retrofit conversion to hybrid gasoline/alternative fuel operation except for methanol. Conversion to LPG is not recommended for vehicles with more than 100,000 km (60,000 miles) of prior use. Methanol conversion is not recommended for vehicles with more than 50,00 km (30,000 miles).

Donakowski, T. D.↗
DOE OSTI2022

Integrated capture and conversion of CO 2 to methane, methanol, or methanol and glycol

A process for producing methane or methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methane or methanol, and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.

Kothandaraman, Jotheeswari↗
DOE OSTI2024

Insights into the Surface Electronic Structure and Catalytic Activity of InO x /Au(111) Inverse Catalysts for CO 2 Hydrogenation to Methanol

In this article, the direct conversion of carbon dioxide (CO 2 ) into methanol (CH 3 OH) via low-temperature hydrogenation is crucial for recycling anthropogenic CO 2 emissions and producing fuels or high value chemicals. Nevertheless, it continues to be a great challenge due to the trade-off between selectivity and catalytic activity. For CO 2 hydrogenation, In 2 O 3 catalysts are known for their high CH 3 OH selectivity. Subsequent studies explored depositing metals on In 2 O 3 to enhance CO 2 conversion. Despite extensive research on metal (M) supported In 2 O 3 catalysts, the role of In-M alloys and M/In 2 O 3 interfaces in CO 2 activation and CH 3 OH selectivity remains unclear. In this work, we have examined the behavior of In/Au(111) alloys and InO x /Au(111) inverse systems during CO 2 hydrogenation using synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and catalytic tests in a batch reactor. Indium forms alloys with Au(111) after deposition. The In-Au(111) alloys display high reactivity towards CO 2 and can dissociate the molecule at room temperature to generate InO x nanostructures. At very low coverages of In (≤ 0.05 ML), the InO x nanostructures are not stable under CO 2 hydrogenation conditions and the active In-Au(111) alloys produces mainly CO and little methanol. An increase in indium coverage to 0.3 ML led to stable InOx nanostructures under CO 2 hydrogenation conditions. These InO x /Au(111) catalysts displayed a high selectivity (~ 80 %) towards CH 3 OH production and an activity for CO 2 conversion that was at least 10 times larger than that of plain In 2 O 3 or Cu(111) and Cu/ZnO(000$\overline{1)}$ benchmark catalysts. The results of AP-XPS show that InO x /Au(111) produces methanol via methoxy intermediates. Inverse oxide/metal catalysts containing InOx open up a possibility for improving CO 2 → CH 3 OH conversion in processes associated with the control of environmental pollution and the production of high value chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Continuous partial oxidation of methane to methanol over Cu-SSZ-39 catalysts

Here, the direct conversion of methane to methanol using molecular oxygen as the oxidant is a grand challenge in the chemical sciences. Here we describe our efforts in using copper-exchanged SSZ-39 for this chemistry and show it is a promising material for this reaction. Testing in a continuous flow reactor at 225 °C, Cu-SSZ-39 showed superior activity for methane partial oxidation compared to Cu-SSZ-13 (site time yields of 26.9 ± 0.8 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 versus 13.2 mol CH3OH ·mol Cu -1 ·h -1 *10 -3 respectively). A clear maximum in methanol productivity, both in terms of a mass catalyst basis and copper atom basis is observed for Cu-SSZ-39 at a Cu/Al ~ 0.2. Running this reaction in the absence of oxygen over samples with a Cu/Al > 0.1 the reactivity is markedly lower than that in the presence of oxygen unlike what is observed in SSZ-13.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparing the reaction profiles of single iron catalytic sites in enzymes and in reticular frameworks for methane-to-methanol oxidation

The design of synthetic inorganic catalysts mimicking the first coordination spheres of enzymatic cofactors often results in lower yields and selectivity than their biological counterparts. In this study, we exploit Kohn-Sham density functional methods to compare the reaction profiles of four single iron-based catalysts for the direct oxidation of methane to methanol: two biomimetic models based on two enzymes (cytochrome P450 and taurine dioxygenase [TauD]) and two synthetic reticular frameworks (iron-BEA zeolite and tri-iron oxo-center-based metal-organic framework). Both the biomimetic and inorganic catalysts show almost zero selectivity toward methanol for methane conversions >1% at ambient temperature. Furthermore, this study highlights that iron’s first coordination shell can influence selectivity toward methanol but to a limited extent. In the absence of methanol protection strategies, high selectivity can be reached only by mimicking the reaction microenvironment of enzymes beyond the first coordination shell of iron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tethered oxygen turns methane into methanol

Precise control of the oxidant — that is, preventing overoxidation — is the missing link in low-temperature methane upgrading. Now, the electro-splitting of carbonate on rutile IrO 2 is shown to cover the surface with on-top oxygen adatoms that act as tethered, single-step hydrogen abstractors. One subset can pull the hydrogen from methane to form a methoxy intermediate, while the neighbouring site can protonate this intermediate to form methanol. Together, this mechanism delivers a room-temperature conversion of methane to methanol with >90% selectivity.

climate-change mitigation↗
DOE OSTI2023

Stationary Direct Methanol Fuel Cells Using Pure Methanol

This project developed stationary direct methanol fuel cells (DMFCs) using pure methanol as the fuel, integrating complementary institutional expertise on platinum group metals free (PGM-free) cathode catalyst (UB), supported anode catalysts (KSU), electrode fabrication, characterization, and optimization (CMU), and multi-phase mass transfer (KU). The proposed cost-effective prototype will deliver reliable and durable performance using a methanol-tolerant PGM-free cathode and a high-performance anode with low PtRu loading. At the end of the project, the research team is expected to deliver a single cell (50 cm 2 ) with ≤3 mg PGM /cm 2 that achieves 300 mW/cm 2 using pure methanol.

30 DIRECT ENERGY CONVERSION↗