Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precise orbit determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Sequential filter design for precision orbit determination and physical constant refinement

Earth-based spacecraft tracking data have historically been processed with classical least squares filtering techniques both for navigation purposes and for physical constant determination. The small, stochastic nongravitational forces acting on the spacecraft are described to motivate the use of sequential estimation as an alternative to the least squares fitting procedures. The stochastic forces are investigated both in terms of their effect on the tracking data and their influence on estimation accuracy. A flexible sequential filter design which leaves the existing trajectory, variational equations, data observable and partial computations undisturbed is described. A detailed filter design is presented that meets the precision demands and flexibility requirements of deep space navigation and of scientific problems.

Curkendall, D. W.↗
NASA NTRS1993

Precision orbit determination using the Tracking and Data Relay Satellite System (TDRSS)

The growth of the Tracking and Data Relay Satellite System (TDRSS) is the result of a greater reliance on the systems to provide nearly global coverage for relaying data from environmental satellites and to reduce or eliminate the reliance on global networks of tracking ground stations. Tracking data collected by TDRSS is often used to compute orbital solutions for moperational mission requirements. Investigations are in progress that seek to assess the feasibility of extending the use of tracking data collected by TDRSS as a means for computing precise orbital solutions. Specifically, this investigation will use covariance analysis techniques to evaluate this extended capability as applied to the TOPEX/Poseidon mission. This study will complement other investigations which carry out similar assessments of TDRSS using actual tracking data. This paper presents some preliminary results for Cycle 5 of the TOPEX/Poseidon mission using simulated two-way range-rate measurements.

Roesset, P.↗
NASA NTRS1978

Application of semianalytical satellite theories to precision orbit determination

Those factors which limit the usefulness of current implementations of the semianalytical approach are discussed. Numerical and analytical enhancements to the semianalytical approach are considered. A simple mathematical model is provided to estimate the computational speed of a semianalytical theory employing the suggested enhancements. The model can factor in current experience with semianalytical theories (integration stepsizes, quadrature orders, speed of recursive formulations, etc.) and the characteristics of the particular output requirement (observation span (or orbit determination interval), observation rate, observation model, etc.). Comparisons with numerical integration are suggested.

Cefola, P. J.↗
NASA NTRS1986

Precise orbit determination of a geosynchronous satellite with differential very-long-baseline interferometry

The use of differential VLBI (DVLBI) to determine the orbit of a U.S. geosynchronous satellite with a position accuracy of a few meters is examined. DVLBI was employed to track the geosynchronous satellite DSCS-II; two observation channels with 2 MHz bandwidth each in a 2 GHz band were used to receive the telemetry signal of the satellite and quasar radio signals. The random observation, delay, station location, and quasar position errors are discussed. The correlation processing of the quasar and satellite signals is described. The accuracy of the estimated satellite position is evaluated using a covariance analysis. It is determined that the satellite position was estimated with an accuracy of about 4 m at the center of the observation arc. It is noted that the modeling error of the solar radiation pressure factor, ionospheric correction error, and observation error need to be corrected in order to provide more accurate orbit determinations.

Shiomi, Tadashi↗
NASA NTRS1990

A reduced-dynamic technique for precise orbit determination

Observations of the Global Positioning System (GPS) will enable a reduced-dynamic technique for achieving subdecimeter orbit determination of earth-orbiting satellites. With this technique, information on the transition between satellite states at different observing times is furnished by both a formal dynamic model and observed satellite positional change (which is inferred kinematically from continuous GPS carrier-phase data). The relative weighting of dynamic and kinematic information can be freely varied. Covariance studies show that in situations where observing geometry is poor and the dynamic model is good, the model dominates determination of the state transition; where the dynamic model is poor and the geometry strong, carrier phase governs the determination of the transition. When neither kinematic nor dynamic information is clearly superior, the reduced-dynamic combination of the two can substantially improve the orbit-determination solution. Guidelines are given here for selecting a near-optimal weighting for the reduced-dynamic solution, and sensitivity of solution accuracy to this weighting is examined.

Wu, S. C.↗
NASA NTRS1990

Precision orbit determination at the NASA Goddard Space Flight Center

This paper describes the GEODYN computer program developed by the Geodynamics Branch at the NASA Goddard Space Flight Center and outlines the procedure for accurate satellite orbit and tracking-data analyses. The capabilities of the program allow the development of gravity fields as large as 90 by 90, and a complete modeling of tidal parameters. It is also feasible to numerically integrate a continuous orbit of a satellite such as Lageos for up to 12 years. The evolution of the orbit can be studied, and, by comparison with locally determined orbits, force model improvements can be made. The GEODYN flow diagrams are presented.

Putney, B.↗
NASA NTRS1990

Altimeter crossover methods for precision orbit determination and the mapping of geophysical parameters

Accurate orbit determination and the recovery of geophysical parameters are presently attempted via methodologies which use differenced height measurements at the points where the ground tracks of the altimetric satellite orbits intersect. Such 'crossover measurements' could significantly improve the earth's gravity field model. Attention is given to a novel technique employing crossover measurements from two satellites carrying altimeter instruments; this method can observe zonal harmonics of the earth's geopotential which are weakly observed through single-satellite crossovers. This dual-satellite crossover technique will be applicable to data from such future oceanographic satellites as ERS-1.

Shum, C. K.↗
NASA NTRS1992

Nonconservative force model parameter estimation strategy for TOPEX/Poseidon precision orbit determination

The TOPEX/Poseidon spacecraft was launched on August 10, 1992 to study the Earth's oceans. To achieve maximum benefit from the altimetric data it is to collect, mission requirements dictate that TOPEX/Poseidon's orbit must be computed at an unprecedented level of accuracy. To reach our pre-launch radial orbit accuracy goals, the mismodeling of the radiative nonconservative forces of solar radiation, Earth albedo an infrared re-radiation, and spacecraft thermal imbalances cannot produce in combination more than a 6 cm rms error over a 10 day period. Similarly, the 10-day drag modeling error cannot exceed 3 cm rms. In order to satisfy these requirements, a 'box-wing' representation of the satellite has been developed in which, the satellite is modelled as the combination of flat plates arranged in the shape of a box and a connected solar array. The radiative/thermal nonconservative forces acting on each of the eight surfaces are computed independently, yielding vector accelerations which are summed to compute the total aggregate effect on the satellite center-of-mass. Select parameters associated with the flat plates are adjusted to obtain a better representation of the satellite acceleration history. This study analyzes the estimation of these parameters from simulated TOPEX/Poseidon laser data in the presence of both nonconservative and gravity model errors. A 'best choice' of estimated parameters is derived and the ability to meet mission requirements with the 'box-wing' model evaluated.

Luthcke, S. B.↗
NASA NTRS1992

A new chapter in precise orbit determination

A report is presented on the use of GPS receivers on board orbiting spacecraft to determine their orbits with unprecedented accuracy. By placing a GPS receiver aboard a satellite one can observe its true motion and reconstruct its trajectory in great detail without knowledge of the forces acting on it. Only the accuracy of the GPS carrier-phase observable, which can be better than 1 cm for a 1 sec duration observation, ultimately limits 'user orbit' accuracy.

Yunck, T. P.↗
NASA NTRS1994

Radiative force model performance for TOPEX/Poseidon precision orbit determination

The TOPEX/Poseidon spacecraft was launched to study the Earth's oceans. To maximize the benefit from the alimetric data collected, mission requirements dictate that TOPEX/Poseidon's orbit must be computed at extremely high accuracy. To meet these demands, a nonconservative force model which accounts for the satellite's complex geometry, attitude and surface properties has been developed. The 'box-wing' representation treats the spacecraft as the combination of flat plates arranged in the shape of a box and a connected solar array. Model performance and parameter sensitivities are discussed.

TRT-THEORETICAL↗
NASA NTRS1993

Improved treatment of GPS force parameters in precise orbit determination applications

Data collected from the International Global Positioning System (GPS) Service (IGS) have been processed at JPL to determine presise orbits for the satellites of the GPS. We have tested a filtering technique to improve modeling of GPS solar radiation pressure force parameters. The new approach improves orbit quality for eclipsing satellites by a factor of two, with typical results in the 25 - 50 cm range.

Vigue, Yvonne↗
NASA NTRS1993

Conservative force model performance for TOPEX/Poseidon precision orbit determination

The TOPEX/Poseidon spacecraft was launched on August 10, 1992 to study the Earth's oceans. To achieve maximum benefit from the altimetric data collected, mission requirements dictate that TOPEX/Poseidon's orbit must be computed at an unprecedented level of accuracy. In order to satisfy these requirements, a model which accounts for the satellite's complex geometry, attitude, and surface properties has been developed. This `box-wing' representation treats the spacecraft as the combination of flat plates arranged in the shape of a box and a connecetd solar array. The nonconservative forces acting on each of the eight surfaces are computed independently, yielding vector accelerations which are summed to compute the total aggregate effect on the satellite center-of-mass. Parameters associated with each flat plate were derived from a finite element analysis of the spacecraft. Certain parameters can be inferred from tracking data and have been adjusted to obtain a better representation of the satellite acceleration history. Changes in the nominal mission profile and the presence of an `anomalistic' force have complicated this tuning process. Model performance, parameter sensitivities, and the `anomalistic' force will be discussed.

Marshall, J. Andrew↗
NASA NTRS2002

JASON-1 Precise Orbit Determination (POD)with SLR and DORIS Tracking

Jason-1, the TOPEX/POSEIDON (T/P) radar altimeter follow-on, is intended to continue measurement of the ocean surface with the same, if not better accuracy. T/P has demonstrated that, the time variation of ocean topography can be determined with an accuracy of a few centimeters, thanks to the availability of highly accurate orbits based on SLR and DORIS tracking. For verification and cross-calibration, Jason-1, was initially injected into the T/P orbit, flying just 72 seconds ahead of T/P. This configuration lasted over 21 Jason cycles. In mid-August T/P was maneuvered into its final tandem configuration, a parallel groundtrack, in order to improve the combined coverage. Preliminary investigations using cycles 1-9, shown at the June 2002 SWT, indicated that nominal Jason orbits can achieve the 2-3 cm accuracy objective, however several puzzling aspects of SLR and DORIS measurement modeling were also observed. This paper presents recent analysis of Jason SLR+DORIS POD spanning more than 20 cycles, and revisits several of the more puzzling issues, including estimation of the Laser Retroreflector Array (LRA) offset. The accuracy of the orbits and of the measurement modeling are evaluated using several tests, including SLR, DORIS, and altimeter crossover residual analysis, altimeter collinear analysis, and direct comparison with GPS and other orbits. T/P POD results over the same period are used as a reference.

Zelensky, N. P.↗
NASA NTRS2004

Improvement of the TOPEX and Jason Orbit Time Series: Precision Orbit Determination, Calibration, Validation and Improvement Through the Combined Reduction and Analysis of GPS, SLR, DORIS and Altimeter Data

Orbit error is a major component in the overall error budget of all altimeter satellite missions. Jason-I is no exception and a 1 cm radial orbit accuracy goal has been set, which represents a factor of two improvement over what is currently being achieved for TOPEX/Poseidon (TP). Our current analysis suggests this goal has been met and even improved upon, but the challenge is to be able to continually achieve this high accuracy, verify the performance and characterize and quantify the remaining errors over the lifetime of the mission. The computation, verification and error characterization of such high accuracy orbits requires the reduction and analysis of all available tracking data (GPS, SLR, DORIS and altimeter). Current analysis also indicates the history of TP orbits can be further improved employing new solution strategies developed and tested on Jason-I. Our research focuses on the calibration, validation and improvement of orbit accuracies using all available tracking data including altimetry. We will compute and distribute well centered Jason orbits with an accuracy of better than 1-cm in the radial component. In addition to the orbits themselves, a characterization of the orbit error will be distributed and accumulated as a time series of orbit performance metrics to track anomalies and trends. The long time series of orbit error characterization will enable a better understanding of the remaining orbit errors and its impact on the altimeter data analysis. As part of this research effort we are also significantly improving the current level of TP orbit accuracy, re-computing new high-accuracy TP orbits from the beginning of the TP mission and continuing into the future (as long as TP is healthy). Our funded research effort will result in a complete and consistent time series of improved orbits for both TP and Jason, significantly benefiting the long time series of altimeter data analysis and the TP/Jason dual mission. The resultant high accuracy orbits and the characterization of their error will allow further improvements to the accuracy and overall quality of the altimeter measurement time series making possible further strides in radar altimeter remote sensing.

Luthcke, Scott B.↗