Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Vacuum ultraviolet thin films. I - Optical constants of BaF2, CaF2, LaF3, MgF2, Al2O3, HfO2, and SiO2 thin films. II - Vacuum ultraviolet all-dielectric narrowband filters

An iteration process matching calculated and measured reflectance and transmittance values in the 120-230 nm VUV region is presently used to ascertain the optical constants of bulk MgF2, as well as films of BaF2, CaF2, LaF3, MgF2, Al2O3, HfO2, and SiO2 deposited on MgF2 substrates. In the second part of this work, a design concept is demonstrated for two filters, employing rapidly changing extinction coefficients, centered at 135 nm for BaF2 and 141 nm for SiO2. These filters are shown to yield excellent narrowband spectral performance in combination with narrowband reflection filters.

Zukic, Muamer↗

Atomic oxygen undercutting of defects on SiO2 protected polyimide solar array blankets

Low Earth Orbital (LEO) atomic oxygen can oxidize SiO2-protected polyimide kapton solar array blanket material which is not totally protected as a result of pinholes or scratches in the SiO2 coatings. The probability of atomic oxygen reaction upon initial impact is low, thus inviting oxidation by secondary impacts. The secondary impacts can produce atomic oxygen undercutting which may lead to coating mechanical failure and ever increasing mass loss rates of kapton. Comparison of undercutting effects in isotropic plasma asher and directed beam tests are reported. These experimental results are compared with computational undercutting profiles based on Monte Carlo methods and their implication on LEO performance of protected polymers.

Banks, Bruce A.↗

Y1Ba2Cu3O(6+delta) growth on thin Y-enhanced SiO2 buffer layers on silicon

SiO2 buffer layers as thin as 2 nm have been developed for use in the growth of Y1Ba2Cu3O(6+delta) thin films on silicon substrates. The SiO2 layers are formed through Y enhancement of silicon oxidation, and are highly stoichiometric. Y1Ba2Cu3O(6+delta) film growth on silicon with thin buffer layers has shown c orientation and Tc0 = 78 K.

Robin, T.↗

SiC Recession Due to SiO2 Scale Volatility Under Combustor Conditions

One of today's most important and challenging technological problems is the development of advanced materials and processes required to design and build a fleet of supersonic High Speed Civil Transport (HSCT) airliners, a follow-up to the Concorde SST. The innovative combustor designs required for HSCT engines will need high-temperature materials with long-term environmental stability. Higher combustor liner temperatures than today's engines and the need for lightweight materials will require the use of advanced ceramic-matrix composites (CMC's) in hot-section components. The HSCT is just one example being used to demonstrate the need for such materials. This thesis evaluates silicon carbide (SiC) as a potential base material for HSCT and other similar applications. Key issues are the environmental durability for the materials of interest. One of the leading combustor design schemes leads to an environment which will contain both oxidizing and reducing gas mixtures. The concern is that these environments may affect the stability of the silica (SiO2) scale on which SiC depends for environmental protection. A unique High Pressure Burner Rig (HPBR) was developed to simulate the combustor conditions of future gas turbine engines, and a series of tests were conducted on commercially available SiC material. These tests are intended as a feasibility study for the use of these materials in applications such as the HSCT. Linear weight loss and surface recession of the SiC is observed as a result of SiO2 volatility for both fuel-lean and fuel-rich gas mixtures. These observations are compared and agree well with thermogravimetric analysis (TGA) experiments. A strong Arrhenius-type temperature dependence exists. In addition, the secondary dependencies of pressure and gas velocity are defined. As a result, a model is developed to enable extrapolation to points outside the experimental space of the burner rig, and in particular, to potential gas turbine engine conditions.

Robinson, Raymond Craig↗

SiC and Si3N4 Recession Due to SiO2 Scale Volatility Under Combustor Conditions

SiC and Si3N4 materials were tested under various turbine engine combustion environments, chosen to represent either conventional fuel-lean or fuel-rich mixtures proposed for high speed aircraft. Representative CVD, sintered, and composite materials were evaluated in both furnace and high pressure burner rig exposure. While protective SiO2 scales form in all cases, evidence is presented to support paralinear growth kinetics, i.e. parabolic growth moderated simultaneously by linear volatilization. The volatility rate is dependent on temperature, moisture content, system pressure, and gas velocity. The burner tests were used to map SiO2 volatility (and SiC recession) over a range of temperature, pressure, and velocity. The functional dependency of material recession (volatility) that emerged followed the form: exp(-QIRT) * P(exp x) * v(exp y). These empirical relations were compared to rates predicted from the thermodynamics of volatile SiO and SiO(sub x)H(sub Y) reaction products and a kinetic model of diffusion through a moving, boundary layer. For typical combustion conditions, recession of 0.2 to 2 micron/h is predicted at 1200- 1400C, far in excess of acceptable long term limits.

Smialek, James L.↗

SiC and Si3N4 Recession Due to SiO2 Scale Volatility Under Combustor Conditions

Silicon carbide (SiC) and Si3N4 materials were tested in various turbine engine combustion environments chosen to represent either conventional fuel-lean or fuel-rich mixtures proposed for high-speed aircraft. Representative chemical vapor-deposited (CVD), sintered, and composite materials were evaluated by furnace and high-pressure burner rig exposures. Although protective SiO2 scales formed in all cases, the evidence presented supports a model based on paralinear growth kinetics (i.e., parabolic growth moderated simultaneously by linear volatilization). The volatility rate is dependent on temperature, moisture content, system pressure, and gas velocity. The burner tests were thus used to map SiO2 volatility (and SiC recession) over a range of temperatures, pressures, and velocities. The functional dependency of material recession (volatility) that emerged followed the form A[exp(-Q / RT)](P(sup x)v(sup y). These empirical relations were compared with rates predicted from the thermodynamics of volatile SiO and SiOxHy reaction products and a kinetic model of diffusion through a moving boundary layer. For typical combustion conditions, recession of 0.2 to 2 micrometers/hr is predicted at 1200 to 1400 C, far in excess of acceptable long-term limits.

Smialek, James L.↗

Fluorescence of Pentavalent Chromium in SiO2 Sol-Gel Glasses

Chromium ions are very attractive to optical spectroscopy and laser physics. It is well known that the first laser in the history is a ruby laser activated with Cr(3+). It was found in early nineties that Cr(4+) was also an interesting lasing ion in the near infrared, and various Cr(4+) lasers have been developed. Very recently, it was reported that Cr(2+) doped in CdSe crystals showed lasing action in the infrared. The above achievement have stimulated an interest in searching for Cr(5+) and investigating its optical properties. Cr(5+) is isoelectronic with Ti(3+) and V(4+), having electron configuration 3d1. Ti(3+) is the active center of commercial cw and femtosecond sapphire lasers, tunable in the range 680-1100 nm. V(4+) doped in YAlO3 and Al2O3 showed broad band emission near 635 nm. Although EPR results of Cr(5+) were reported, the optical properties were less studied. Herren et al. reported an observation of luminescence from Cr doped in SiO2 sol-gel glass. The luminescence spectrum was assigned to pentavalent ions in their first paper, and later it was identified to be the emission from the charge transfer transition of Cr(6+). The first observation of photoluminescence from octahedrally coordinated Cr(5+) in BaCaMg aluminate glasses was reported very recently. In this work, we report luminescence results of Cr doped SiO2 sol-gel glasses. The fluorescence spectra are very different from Herrens' results, and we believe it originates from pentavalent Cr.

Jia, Weiyi↗

Thermodynamics of the Lu2O3 – SiO2 system and comparison to other Rare Earth Silicates

Environmental barrier coatings are necessary to protect SiC based ceramics and composites from water vapor degradation in harsh engine environments. Currently, rare earth (RE) silicates are the most promising systems to protect SiC based ceramics and composites. This protection is largely based on reduced silica activity in these rare earth silicates which results in a lowered reactivity with water vapor. To that end, previous Knudsen effusion mass spectrometry (KEMS) studies have explored RE = Yb, Y silicates to measure the reduced silica activity and subsequent water vapor reactivity. Similarly, this work employs the KEMS technique to measure the SiO(g) vapor pressure in Lu containing RE silicates to calculate the activity of silica within the monosilicate [log(a(SiO2)) = -2351.1*1/T-1.6731] and the disilicate (log(a(SiO2)) = -4884.0*1/T + 2.2208) as a function of temperature. The enthalpies of formation for Lu monosilicate from the oxides and the elements were calculated to be -45±3 kJ/mol at 1550 K and -2831.1±12 kJ/mol at 298 K, respectively. The measured enthalpy of formation and those found in literature are compared to modeled values from density functional theory and those estimated using electronegativity.

Knudesen Effusion Mass Spectrometry↗

Water adsorption, solvation and deliquescence of alkali halide thin films on SiO2 studied by ambient pressure X-ray photoelectron spectroscopy

The adsorption of water on KBr thin films evaporated onto SiO2 was investigated as a function of relative humidity (RH) by ambient pressure X-ray photoelectron spectroscopy. At 30percent RH adsorbed water reaches a coverage of approximately one monolayer. As the humidity continues to increase, the coverage of water remains constant or increases very slowly until 60percent RH, followed by a rapid increase up to 100percent RH. At low RH a significant number of the Br atoms are lost due to irradiation damage. With increasing humidity solvation increases ion mobility and gives rise to a partial recovery of the Br/K ratio. Above 60percent RH the increase of the Br/K ratio accelerates. Above the deliquescence point (85percent RH), the thickness of the water layer continues to increase and reaches more than three layers near saturation. The enhancement of the Br/K ratio at this stage is roughly a factor 2.3 on a 0.5 nm KBr film, indicating a strong preferential segregation of Br ions to the surface of the thin saline solution on SiO2.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Rutile structured and crystallizes in the tetragonal P4_2/mnm space group. The structure is three-dimensional. Si4+ is bonded to six equivalent O2- atoms to form a mixture of corner and edge-sharing SiO6 octahedra. The corner-sharing octahedral tilt angles are 49°. There is four shorter (1.78 Å) and two longer (1.84 Å) Si–O bond length. O2- is bonded in a distorted trigonal planar geometry to three equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Fluorite structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Si4+ is bonded in a body-centered cubic geometry to eight equivalent O2- atoms. All Si–O bond lengths are 1.98 Å. O2- is bonded to four equivalent Si4+ atoms to form a mixture of corner and edge-sharing OSi4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is quartz (beta) structured and crystallizes in the hexagonal P6_422 space group. The structure is three-dimensional. Si4+ is bonded to four equivalent O2- atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.62 Å. O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Hydrophilite-like structured and crystallizes in the orthorhombic Pbcn space group. The structure is three-dimensional. Si4+ is bonded to six equivalent O2- atoms to form a mixture of corner and edge-sharing SiO6 octahedra. The corner-sharing octahedral tilt angles are 51°. There is four shorter (1.78 Å) and two longer (1.84 Å) Si–O bond length. O2- is bonded in a distorted trigonal planar geometry to three equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Low Tridymite-like structured and crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. there are two inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.63 Å) and one longer (1.64 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.62–1.64 Å. There are five inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the third O2- site, O2- is bonded in a linear geometry to two equivalent Si4+ atoms. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 crystallizes in the cubic Fd-3m space group. The structure is three-dimensional. Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.60 Å) and three longer (1.66 Å) Si–O bond length. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a linear geometry to two equivalent Si4+ atoms. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is low (alpha) Cristobalite-like structured and crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. there are two inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. There are three inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Keatite-like structured and crystallizes in the orthorhombic Pnnm space group. The structure is three-dimensional. there are five inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the third Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.61 Å) and three longer (1.62 Å) Si–O bond length. In the fourth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the fifth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. There are ten inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the third O2- site, O2- is bonded in a linear geometry to two equivalent Si4+ atoms. In the fourth O2- site, O2- is bonded in a linear geometry to two Si4+ atoms. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the seventh O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eighth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the tenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on SiO2 by Materials Project

SiO2 is Low Tridymite-like structured and crystallizes in the orthorhombic Cmc2_1 space group. The structure is three-dimensional. there are four inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the third Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the fourth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. There are seven inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the seventh O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms.

36 MATERIALS SCIENCE↗