Search NASA⌕ Search

SEARCH · Search NASA

Results for “Single-layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

User's guide to computer program CIVM-JET 4B to calculate the transient structural responses of partial and/or complete structural rings to engine-rotor-fragment impact

A user-oriented computer program CIVM-JET 4B is described to predict the large-deflection elastic-plastic structural responses of fragment impacted single-layer: (a) partial-ring fragment containment or deflector structure or (b) complete-ring fragment containment structure. These two types of structures may be either free or supported in various ways. Supports accommodated include: (1) point supports such as pinned-fixed, ideally-clamped, or supported by a structural branch simulating mounting-bracket structure and (2) elastic foundation support distributed over selected regions of the structure. The initial geometry of each partial or complete ring may be circular or arbitrarily curved; uniform or variable thicknesses of the structure are accommodated. The structural material is assumed to be initially isotropic; strain hardening and strain rate effects are taken into account.

Stagliano, T. R.↗
NASA NTRS1976

A study of efficiency in low resistivity silicon solar cells

A general device-analysis program has been utilized to study the efficiency of silicon solar cells. The analysis is applied to specific geometries of both n(+)-p and n(+)-p-p(+) solar cells, and involves a numerical solution of the basic transport and continuity equations. This approach allows solutions that are free of typical limiting assumptions involved in solving the device equations as well as solutions relating to lifetime, mobility variations, and diffused-region profiles. The analysis includes available empirical information on diffusion length, mobility, and lifetime as a function of doping, as well as a Gaussian profile for the diffused region. Results are presented which illustrate the limitations of efficiency as a function of doping. It is found that the maximum efficiencies for both types of cell converge at lower resistivities to around 16% with air-mass-zero radiation and a single-layer absorbing-SiO antireflecting film. It is also found that the minority-carrier lifetime, both in the n(+) surface and p-type bulk regions, presents serious limitations to conversion efficiency, particularly in the low-resistivity cells.

Dunbar, P. M.↗
NASA NTRS1977

Optimum antireflection coating for Antireflection-coated Metal-Oxide-Semiconductor /AMOS/ solar cells

Consideration is given to the design of a single-layer optimum antireflection coating for AMOS (antireflection-coated metal-oxide-semiconductor) solar cells to match the entire sunlight spectrum. The energy conversion efficiency is maximized by maximizing the open-circuit voltage and the short-circuit current. The former is maximized by oxidation techniques and the latter is maximized by the light-coupling into the solar cell. With reference to the effective index of refraction as obtained by ellipsometry, examples of optimum antireflection coatings for 60-A Au-GaAs solar cells are presented.

Yeh, Y. C. M.↗
NASA NTRS1979

Transient thermal response of ablating bodies

A numerical study of transient thermal response of a blunt-nosed axisymmetric body made of Teflon is presented using a two-layer thermal model. It is shown that phase change and transverse heat conduction have a considerable effect on the internal temperature field. Comparison of the numerical results with experimental data shows that the single-layer thermal model does not predict the real feature of the thermal field, whereas the results of the two-layer thermal model agree reasonably well with the experiment.

Arai, N.↗
NASA NTRS1979

Viking radio occultation measurements of the atmosphere and topography of Mars - Data acquired during 1 Martian year of tracking

The results of one Martian year of radio occultation measurements of the atmosphere and topography of Mars obtained using the Viking Orbiters are briefly summarized. Determinations of the vertical distribution of tropospheric gas refractivity and ionospheric electron density obtained from atmospheric Doppler frequency perturbations of the S and X band radio tracking frequencies indicate large meteorological variations, with near-surface temperatures ranging from 150 to 250 K, 5-km atmospheric pressure ranging from 3.5 to 4.8 mbar, inversion layers over the polar caps and dust storms, and seasonal pressure variations. Double- and single-layered upper atmospheric electron density profiles were observed on the sunlit and dark sides of the planet, respectively. A topographic map of the Martian surface, obtained from the limb diffraction effects observed at ingress and egress, is found to agree well with the elevation contours of US Geological survey map M 25M 3 RMC, with the exception of the south polar and Alba Patera regions.

Lindal, G. F.↗
NASA NTRS1980

Titanium dioxide antireflection coating for silicon solar cells by spray deposition

A high-speed production process is described for depositing a single-layer, quarter-wavelength thick antireflection coating of titanium dioxide on metal-patterned single-crystal silicon solar cells for terrestrial applications. Controlled atomization spraying of an organotitanium solution was selected as the most cost-effective method of film deposition using commercial automated equipment. The optimal composition consists of titanium isopropoxide as the titanium source, n-butyl acetate as the diluent solvent, sec-butanol as the leveling agent, and 2-ethyl-1-hexanol to render the material uniformly depositable. Application of the process to the coating of circular, large-diameter solar cells with either screen-printed silver metallization or with vacuum-evaporated Ti/Pd/Ag metallization showed increases of over 40% in the electrical conversion efficiency. Optical characteristics, corrosion resistance, and several other important properties of the spray-deposited film are reported. Experimental evidence indicates a wide tolerance in the coating thickness upon the overall efficiency of the cell. Considerations pertaining to the optimization of AR coatings in general are discussed, and a comprehensive critical survey of the literature is presented.

Kern, W.↗
NASA NTRS1983

Tests on Double Layer Metalization

28 page report describes experiments in fabrication of integrated circuits with double-layer metalization. Double-layer metalization requires much less silicon "real estate" and allows more flexibility in placement of circuit elements than does single-layer metalization.

Woo, D. S.↗
NASA NTRS1982

Cloud cover from high-resolution scanner data - Detecting and allowing for partially filled fields of view

A new technique is presented for obtaining cloud cover and determining clear sky radiances using high-resolution IR scanner data. The technique, which can be automated, employs the spatial structure of the IR radiance field to identify radiances associated with fields of view that are either free of clouds or completely covered by clouds drawn from one or more distinct layers. The approach is particularly well-suited for determining clear sky radiances over oceans from which sea surface temperatures may be derived. In addition, for single-layered systems, the cloud cover fraction for a given region may be obtained from the clear sky radiance, the completely cloud-covered radiance, and the mean radiance for the region. For such systems the separation of completely covered from partially covered fields of view makes it possible to estimate the errors associated with commonly used threshold techniques for determining cloud cover.

Coakley, J. A., Jr.↗
NASA NTRS1983

A concept for global crop forecasting

The mission, instrumentation, and design concepts for microwave radiometer satellites for continuous crop condition forecasting and monitoring on a global basis are described. Soil moisture affects both crop growth and the dielectric properties of the soil, and can be quantified by analysis of reflected radiance passively received by orbiting spacecraft. A dedicated satellite reading a swath 200 km across, with 1 km and 1 K temperature resolution, could track the time-varying changes of solid moisture, sea ice, and water surface temperature. Launched by the Shuttle into an interim orbit, a boost would place the satellite in a 400 or 700 km orbit. Resolution requirements indicate a 45-725 m diam antenna, with 70 dB gain, operating at frequencies of 1.08, 2.03, and 4.95 GHz to ensure atmospheric transparency. Alternative structural concepts include either double-layer tetrahedral or single-layer geodesic trusses as the basic structural members. An analysis of the electrostatic positioning of the parabolic antenna membrane is outlined.

Lovelace, U. M.↗
NASA NTRS1983

Low level water vapor fields from the VISSR Atmospheric Sounder (VAS) 'split window' channels

The use of the 11 and 12-micron IR-radiometer channels of the VISSR Atmosphere Sounder (VAS) on the GOES to detect water vapor in the lowest 300-400 mb of the troposphere is reported. An algorithm is developed to eliminate the background temperature, allowing the calculation of precipitable water (PW) over both land and water via a single-layer radiative model. This 'split-window' method is demonstrated in a case study, covering the US on July 13, 1981. PW values were calculated from five VAS images and compared with those from radiosonde data and surface measurements. It is shown that the VAS PW images have good resolution (15 km), reveal vivid, continuously evolving details, and differentiate deep, convection-supporting layers from shallow ones. PW ranged from 1.7 to 5.5 g/sq cm (+ or - 1.0 g/sq cm), in good agreement with other measurements. Since this method can detect mesoscale water-vapor fields in relatively clear air, it is considered of great potential value for numerical forecasting.

Robinson, W. D.↗
NASA NTRS1984

Progress in developing ultrathin solar cell blanket technology

A program was conducted to develop technologies for welding interconnects to three types of 50-micron-thick, 2 by 2-cm solar cells. Parallel-gap resistance welding was used for interconnect attachment. Weld schedules were independently developed for each of the three cell types and were coincidentally identical. Six 48-cell modules were assembled with 50-micron (nominal) thick cells, frosted fused-silica covers, silver-plated Invar interconnectors, and four different substrate designs. Three modules (one for each cell type) have single-layer Kapton (50-micron-thick) substrates. The other three modules each have a different substrate (Kapton-Kevlar-Kapton, Kapton-graphite-Kapton, and Kapton-graphite-aluminum honeycomb-graphite). All six modules were subjected to 4112 thermal cycles from -175 to 65 C (corresponding to over 40 years of simulated geosynchronous orbit thermal cycling) and experienced only negligible electrical degradation (1.1 percent average of six 48-cell modules).

Patterson, R. E.↗
NASA NTRS1986

The effect of cloud sides on reflected solar radiation as deduced from satellite observations

The observation of a feature that is characteristic of the reflection of solar radiation from absorbing finite clouds is reported. When absorption takes place, more radiation can be reflected by broken cloud fields than by extensive unbroken cloud fields. This feature is observed in solar radiation at 3.7 microns reflected by low-level, single-layered systems of water clouds over the Pacific Ocean. Interpreting the effect as due to geometrical factors, it is noted that absorption causes the reflected radiances to be highly anisotropic, so that they are generally greater from the sun-facing cloud sides than from the cloud tops. Diffusive leakage of radiation through the cloud sides is also reduced, and as a result maximum reflectivities occur in situations that maximize the contributions to the reflected radiation from the sides relative to that from the tops. Interpreting the effect as due to changes in liquid water content and cloud droplet sizes, it is noted that the observations at 0.63, 3.7, and 11 microns are consistent with a cloud model in which the liquid water content and droplet sizes are greater in the cloud centers and smaller at their edges. Theoretical calculations that qualitatively support both interpretations are presented.

Coakley, J. A., Jr.↗
NASA NTRS1986

Effects of instrument characteristics on cloud properties retrieved from satellite imagery data

The relationships between sensor resolution and derived cloud properties in satellite remote sensing were studied by comparisons of cloud characteristics determined by spatial coherence analysis of AVHRR and GOES data. The latter data were simulated from 11 microns AVHRR data and were assigned a resolution (8 sq km) half that of the AVHRR. Day and nighttime passes were considered for single-layer maritime cloud systems. Sample radiance vs local standard deviation plots of 1024 points are provided for the same area from AVHRR and GOES-East sensors, demonstrating a qualitative agreement.

Baldwin, D. G.↗
NASA NTRS1987

A dynamic threshold method for obtaining cloud cover from satellite imagery data

Errors in cloud cover derived by using a fixed threshold applied to imagery data depend not only on the fractional cover but also on cloud size. As a result, a fixed threshold applied to two scenes having the same cloud cover will produce different estimates of the cover when the clouds in the two scenes have different sizes. To allow for this influence due to cloud size, a dynamic threshold method is presented. In this method an infrared threshold is adjusted to achieve the highest correlation between the threshold-derived cloud cover and the mean emitted radiance for mesoscale-sized subregions within the scene. For single-layered cloud systems this threshold achieves a cancellation of errors in the cloud cover for the subregions so that the resulting cloud cover for the region and the associated estimates of cloud properties are in fair agreement with estimates obtained using the spatial coherence method. The agreement illustrates the validity of the layered cloud model used in different ways by the two methods. The performance of the dynamic threshold method is contrasted with that of a fixed threshold applied to the same data in order to illustrate the merits of applying a scene-dependent threshold.

Coakley, James A., Jr.↗
NASA NTRS1988

Modal attenuation in multilayered coated waveguides

Propagation and attenuation constants of low-order normal modes in a circular waveguide lined with lossy coating layers are calculated using a generalized dispersion equation. It is found that the use of multilayered coating can significantly enhance modal attenuations over a broader frequency range compared to that for a single-layer coated structure. For a cylinder with radius a = 2 lambda, the attenuation constants for the dominant modes are shown to increase by 20 dB per a by adding a lossless padding layer to a lossy magnetic coating. Application of this result in radar cross-section (RCS) reduction is discussed.

Chou, Ri-Chee↗
NASA NTRS1987

Ion-assisted deposition of lanthanide trifluorides for VUV applications

The lanthanide trifluorides show promise as vacuum ultraviolet (VUV) coating materials. The optical properties of single-layer coatings vary with deposition temperature, and with ion-beam energy and current density. The optical constants, stoichiometry, durability, moisture adsorption, and crystallinity are studied for trifluoride films made under a variety of deposition conditions.

Lingg, L. J.↗
NASA NTRS1989

Viewing zenith angle dependence of cloudiness determined from coincident GOES East and GOES West data

The effect of the viewing zenith angle (VZA) on the cloudiness values observed by a satellite was investigated using a combination of two cloud-amount data sets derived from nearly simultaneous collocated GOES-E and GOES-W radiance measurements over the Pacific Ocean during May 1979 and July 1983. A hybrid bispectral threshold method was used to analyze data for single-layer and total cloudiness. It was found that the cloud fraction values increased with increasing VZA for almost all cases. Low clouds exhibited the greatest increases with a VZA increase for cloud amounts in the 0.1 range, whereas high clouds showed greatest increases for cloud amounts around 0.5. Midlevel clouds showed only a slight dependence on VZA. Total cloudiness increased the most, reflecting its predominantly low-cloud composition.

Minnis, Patrick↗
NASA NTRS1938

Application and Testing of Transparent Plastics Used in Airplane Construction

This report concerns the efforts being made to remove the source of danger to passengers arising from the fracturing of silicate glass. Some of the alternatives presented include: single-layer safety glass, multi-layer safety glass, transparent plastic resins. Some of the resins considered are celluloid, cellulose acetates, and mixtures of polymers.

Riechers, K↗