Search NASA⌕ Search

SEARCH · Search NASA

Results for “Soil Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Microbial inoculants for soil restoration: A Risk-Proportional Stewardship Framework Integrating Strain-Resolved Genomics and Adaptive Governance

Global soil degradation and increasing reliance on chemical inputs threaten agricultural sustainability, driving interest in microbial inoculants as tools for soil restoration. These biological products have the potential to enhance nutrient cycling, improve soil structure, and support plant resilience, but their environmental release raises important safety and stewardship considerations. Here, we propose a risk-proportional framework for the responsible deployment of microbial inoculants grounded in release-based stewardship. The framework integrates genome-resolved strain identification, exclusionary hazard screening, bioassay-based risk triage, ecological testing under realistic conditions, and monitored field deployment. Drawing on evidence from microbial ecology and invasion biology, we highlight how inoculants can alter resident microbial communities, influence ecosystem function, and, in some cases, facilitate gene flow, underscoring the need for risk assessment. We further outline a federated, genome-informed data infrastructure to support traceability, cross-jurisdiction learning, and adaptive management. Together, this approach provides a scalable and scientifically grounded pathway to balance innovation and safety, enabling microbial technologies to contribute to soil restoration and climate-resilient agriculture.

Edlund, Anna [OATH Inc]↗
DOE OSTI2021

Influences on Subsurface Plutonium and Americium Migration

Plutonium (Pu) has been released to the environment worldwide, including approximately 1.85 × 1015 Bq (200 kg) of Pu from process waste solutions to unconfined soil structures at the Hanford Site in Washington State. The subsurface mobility of Pu is influenced by complex interactions with sediments, groundwater, and any co-contaminants within the waste stream. Previous investigations at Hanford have shown that Pu exists as discrete PuO 2 particles forming before or after disposal, as secondary solid phases formed from waste interactions with sediments as adsorbed/incorporated species, and/or as dissolved species. In this research, new evidence is presented for the existence of PuO 2 , PuO 2 -Bi 2 O 3 composites, and particles from burnt Pu metal in near-surface sediments where Pu-laden acidic process waste was disposed to sediments. Pu and americium (Am) L3 X-ray absorption spectroscopy and density functional theory suggest that, in larger, more crystalline PuO 2 particles, Am formed from radioactive decay is retained in the Pu IV O 2 structure as Am IV . The Pu and Am that were disposed of in an acidic waste stream have since migrated deeper into the subsurface with detection to at least 37 meters below ground surface. In contrast, Pu deposited near the ground surface from neutral pH waste is found to be homogeneously distributed and relatively immobile. Groundwater extractions performed on contaminated sediments indicate that both Pu and Am are recalcitrant, with Am being fractionally less extractable than Pu on a molar basis. These results suggest that the more mobile fraction of Am has migrated from the near-surface and may be present in the deeper sediments as a different phase than Pu. From these results, it is suggested that Pu and Am deposited from acidic wastes were initially mobile and became significantly less mobile as wastes were neutralized within the soil profile.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Mineral Protection and Resource Limitations Combine to Explain Profile-Scale Soil Carbon Persistence

The fate of soil carbon (C) is largely controlled by microbial oxidation of organic matter (OM), which is constrained by a variety of mechanisms. OM association with soil minerals provides pronounced protection against microbial decomposition. However, factors such as climate, occlusion, and resource limitations also contribute to OM preservation. Here, we explore the factors explaining C distribution and age within an upland rainforest soil in Hawai'i, a site with abundant preferential flow paths (PFPs) and high short-range order (SRO) mineral content. We characterized lateral and vertical changes in Δ 14 C, SRO mineral content, C-functional group chemistry, and microbial community composition to elucidate the contributions of multiple protection mechanisms to OM preservation. Consistent with our expectation, SRO mineral content and Δ 14 C were strongly correlated (R 2 = 0.95), indicating strong mineral protection of OM throughout the profile. Surprisingly, distance from PFP was also a significant predictor of Δ 14 C and improved model fit, particularly in the shallow horizons (R 2 = 0.97). Elevated C/N ratios, decreased microbial abundance, and greater SRO mineral content suggest nitrogen limitations and enhanced mineral protection constrain OM turnover with distance from PFPs in deep, subsurface mineral horizons. Steady microbial abundance, increasing putative anaerobe abundance, and changes in C-functional group chemistry indicate oxygen limitations constrain OM turnover in the matrix of shallow mineral horizons. Given that oxygen and nutrient limitations contribute to OM preservation in this high SRO system—an exemplar of mineral protection—resource limitations may play an even more important role in OM preservation in other well-structured soils.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Estimating soil thermal inertia profiles from the passive equilibration of a temperature probe: Supporting data and code

This dataset contains measurements of soil thermal properties and organic layer thickness at three field sites on the Seward Peninsula near Nome, Alaska, USA. Code is also provided for estimation of soil thermal properties from temperature data, including a forward heat transfer mode, a library of simulated temperature data, and an inversion scheme to retrieve thermal properties from temperature measurements (Lamb et al., 2025). This dataset and code is published in support of the manuscript “Estimating Soil Thermal Inertia Profiles from the Passive Equilibration of a Temperature Probe” by Lamb et al., 2025, in which an experimental thermal measurements technique is developed. The dataset contains measurements of soil thermal properties and organic layer thickness obtained with an industry standard thermal properties analyzer and direct observations, as well as data generated using the experimental technique to estimate thermal properties and soil structure from temperature observations. All data is reported in .csv format, and all code is written in Python 3.7 using standard packages. This research was performed as a part of the NGEE Arctic project, which aims to advance model predictions of arctic carbon cycle responses to a changing climate over the 21st Century.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Seismic isolation: A pathway to standardized advanced nuclear reactors

Standardizing advanced nuclear reactors is a pathway to substantially reducing their overnight capital cost and achieving parity with other power sources, including renewables and fossil fuels. The seismic load case has thwarted standardization of nuclear power plants because site-specific seismic hazard and local near-surface geology has triggered soil-structure-interaction analysis, design, equipment qualification, regulatory review, and licensing, ensuring that each build is different. To achieve standardized or site-independent certified advanced reactor designs, the impact of the seismic load case on the engineering and construction cost and time must be substantially mitigated. Seismic isolation is a mature technology that has been used for more than 30 years in non-nuclear sectors to substantially reduce earthquake demands in buildings and other infrastructure. In this paper, seismic isolation is used to enable standardization of advanced reactor designs, aimed at the complete re-use of a site-independent, certified design and repeated procurement of safety-class equipment. A pathway to standardized designs using seismic isolation is demonstrated for two fundamentally different advanced reactors: a molten salt reactor and a high temperature gas reactor. Each reactor building is equipped with three specialized pieces of safety-class equipment, namely, a reactor vessel, a steam generator, and a control rod drive mechanism housing that is attached to the reactor head. Analysis is performed per ASCE and ASME standards to design the buildings and the equipment for two base conditions: conventional (fixed base) and base isolated. The impact of the seismic load case is characterized for the reinforced concrete walls in the buildings and for the equipment, measured using vessel wall thickness and horizontal accelerations. Here the analysis results show that the fixed-base buildings, designed for a site of low seismic hazard (peak ground acceleration, PGA = 0.15 g) could be constructed at a site of much greater seismic hazard (PGA = 0.7 g) if seismic base isolation is employed. Importantly, the scope of the site-specific analysis, design, and qualification would be limited to the seismic isolators and the isolated substructure, drastically reducing plant-specific engineering, review, and licensing, and time to construction start. Regulatory challenges and opportunities with standardized reactor designs are identified.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Seismic response of vertical dry storage casks under three-dimensional earthquake motions

Ensuring the long-term seismic safety of dry storage casks (DSCs) is becoming increasingly critical as these systems evolve from temporary to de facto permanent repositories for spent nuclear fuels. Traditional seismic soil–structure interaction (SSI) assessment methods use one-dimensional deconvolution or simplified boundary conditions to model incident waves. Although computationally appealing, simplifying assumptions may alter the seismic risk by neglecting the full complexity of three-dimensional (3D) wave propagation effects. To address this challenge, this paper introduces a novel high-fidelity computational framework that leverages the Domain Reduction Method (DRM) with perfectly matched layers (PML) to accurately transfer complex, 3D seismic wavefields from regional-scale fault-rupture simulations into local-scale finite element models of DSCs. Using broadband, physics-based ground motions from a generic M w 7.0 strike-slip event, both single-cask and multi-cask configurations were investigated under near- and far-field conditions. Emphasis is placed on capturing complex SSI, spatial variability in the ground motion, and nonlinear phenomena such as cask rocking and sliding. Numerical results demonstrate that near-field conditions, where forward directivity and fling-step effects dominate, lead to significantly higher DSC rocking and sliding. Far-field cases, by contrast, generally exhibit modest responses. Incorporating SSI tends to amplify or alter DSC response spectra and introduce response variability, which underscores the need for site-specific evaluations and robust modeling approaches to ensure the seismic integrity of DSCs in interim spent fuel storage installations.

Das, Tonmoy↗
DOE OSTI2025

From pixels to patterns: Coupling Optical Coherence Tomography and machine learning for monitoring coastal wetland root systems

Coastal wetlands are crucial in shoreline stabilization, carbon sequestration, and storm protection. Yet, due to limitations in traditional destructive sampling techniques, the belowground biomass (live root mass) and necromass (dead and decaying roots) remain difficult to assess in coastal wetlands, limiting our understanding on coastal resilience, nutrient cycling, and soil structure. This study employs Optical Coherence Tomography (OCT) as a high-resolution imaging technique to analyze root biomass and necromass in the Terrebonne Basin, Louisiana. A Random Forest (RF) model was developed to classify root health states based on OCT-derived features, achieving an accuracy of 70% in distinguishing live from dead root segments. The results demonstrate that OCT, combined with ML, offers a promising novel approach to root analysis, providing fine-scale insights into root morphology and decay patterns that are not easily captured by conventional methods. This research lays the foundation for future integration of OCT with complementary imaging modalities such as X-ray Computed Tomography (XCT) and advanced ML algorithms to enhance classification accuracy and scalability. Future work aims to expand the dataset diversity across different wetland types and apply the methodology for large-scale, repeatable assessments of root biomass turnover and accumulation, with important implications for wetland monitoring, conservation, and restoration under changing environmental conditions.

AI/ML↗
DOE OSTI2021

Effect of Biochar and Biochar Particle Size on Plant-Available Water of Sand, Silt Loam, and Clay Soil

Biochar is being used as a soil amendment to improve soil hydraulic properties. It has been reported that biochar increases plant-available water, particularly in coarse-textured soils; however, effects on fine-textured soils are less pronounced. Here, we quantified the effects of biochar particle size on plant-available water in sand, silt loam, and clay soils. We amended these soils with a hydrophilic biochar, and packed soil-biochar mixtures into columns of 5.35-cm diameter and 3.0-cm height. Biochar was produced by gasification of woody forest residues. We applied the biochar at two different rates (0.5\% and 2\% by weight of C) and with four different biochar particle-size fractions ($<$4.75, $<$2.0, $<$1.0 and $<$0.5 mm). Our results show that biochar amendments increased the plant-available water (when expressed gravimetrically) of all three soils, particularly at the highest biochar application rate. Although the absolute increase in plant-available water was largest for the silt loam soil, the relative increase of plant-available water was greater for the sand than for the silt loam and clay. When expressed in volumetric terms, however, the effects on water retention were less pronounced: the sand showed a small increase in plant-available water with biochar amendment, and no change was observed with the silt loam and clay. Particle size of biochar had little effect on plant-available water (when expressed in gravimetric terms) in the three soils, but silt loam and clay showed increased plant-available water (when expressed in volumetric terms) with decreasing biochar particle size, while no effect was observed for the sand. While our findings corroborate many of the previously reported effects of biochar on soil-water retention, we show that the effects and their magnitude depend on whether the results are reported in terms of gravimetric or volumetric water contents. Because bulk density tends to decrease with increasing biochar application, so will the volumetric water content, and thus the magnitude of the effect on plant-available water will be smaller when expressed in volumetric water content.

hydraulic properties, water holding capacity, soil↗
DOE OSTI2025

Postfire Biogeochemical Processes: Implications to Source Water Quality in Fire-Influenced Watersheds

Forested watersheds are instrumental in providing purified and reliable water to millions of people worldwide. The changing climate has increased the frequency and severity of global fire events. Forested watersheds and their ecosystem functions are greatly disrupted during fire activity. Postfire concerns in forested watersheds include unpredictable and potentially simultaneous alterations in source water quality and hydro-biogeochemical processes. Here, the degree of fire severity can complexly modify water quality through the production of fire-transformed constituents on the burned forest floor (i.e., nutrients, metal(loid)s, dissolved organic matter, and the formation of disinfection byproducts). Correspondingly, fire severity and postfire rainfall patterns can refine hydro-biogeochemical processes that influence the transport of the fire-transformed constituents (i.e., vegetation function, soil structure, hydrological pathways, and microbial communities). Postfire alterations to water quality and hydro-biogeochemical processes introduce further complexity with varying temporal influence, which ranges from months to decades. As postfire water quality and watershed response research progresses, it is essential to homogenize interdisciplinary expertise to bridge knowledge gaps between fields ranging from forest ecology, hydrology, microbiology, and geochemistry. A multidisciplinary approach in wildfire research will facilitate a comprehensive perception of the diverse water quality risks associated with fire activity and mitigate fire concerns on a global level.

Disinfection Byproducts↗
DOE OSTI2021

Ground Motion Inputs for the Seismic Shake Table Test

Currently, spent nuclear fuel (SNF) is stored in on-site independent spent-fuel storage installations (ISFSIs) at seventythree (73) nuclear power plants (NPPs) in the US. Because a site for geologic repository for permanent disposal of SNF has not been constructed, the SNF will remain in dry storage significantly longer than planned. During this time, the ISFSIs, and potentially consolidated storage facilities, will experience earthquakes of different magnitudes. The dry storage systems are designed and licensed to withstand large seismic loads. When dry storage systems experience seismic loads, there are little data on the response of SNF assemblies contained within them. The Spent Fuel Waste Disposition (SFWD) program is planning to conduct a full-scale seismic shake table test to close the gap related to the seismic loads on the fuel assemblies in dry storage systems. This test will allow for quantifying the strains and accelerations on surrogate fuel assembly hardware and cladding during earthquakes of different magnitudes and frequency content. The main component of the test unit will be the full-scale NUHOMS 32 PTH2 dry storage canister. The canister will be loaded with three surrogate fuel assemblies and twenty-nine dummy assemblies. Two dry storage configurations will be tested – horizontal and vertical above-ground concrete overpacks. These configurations cover 91% of the current dry storage configurations. The major input into the shake table test are the seismic excitations or the earthquake ground motions – acceleration time histories in two horizontal and one vertical direction that will be applied to the shake table surface during the tests. The shake table surface represents the top of the concrete pad on which a dry storage system is placed. The goal of the ground motion task is to develop the ground motions that would be representative of the range of seismotectonic and other conditions that any site in the Western US (WUS) or Central Eastern US (CEUS) might entail. This task is challenging because of the large number of the ISFSI sites, variety of seismotectonic and site conditions, and effects that soil amplification, soil-structure interaction, and pad flexibility may have on the ground motions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

A Single Application of Compost Can Leave Lasting Impacts on Soil Microbial Community Structure and Alter Cross-Domain Interaction Networks

Our current understanding suggests that nutrient management strategies applied to agricultural soils over multiple years are required to cause major and stable shifts in soil microbial communities. However, some studies suggest that agricultural soils can benefit even from sporadic, single additions of organic matter. Here we investigate how single additions of high-quality organic matter can cause significant shifts in microbial soil communities over multiple cropping cycles. We grew radishes in a tropical Oxisol soil for six crop cycles after a single application of a high-nitrogen compost or urea. At planting and before biomass harvest, we sampled soils influenced by the radish rhizosphere and sequenced bacterial and archaeal 16S and fungal ITS rDNA marker genes. We measured microbial richness and diversity, community composition and structure, and constructed correlation networks to predict cross-domain microbial interactions. We found that a single application of compost, compared to urea or control, resulted in a persistent improved plant biomass response and led to sustained changes in the soil microbial community throughout the duration of the 227-day study. Compost altered the structure of both the fungal and prokaryotic microbial communities, introduced new microorganisms that persisted in the resident soil system, and altered soil microbial correlation network structure and hub taxa. In contrast, fertilization with urea did not significantly alter the structure of soil microbial communities compared to the control but reduced network complexity and altered hub taxa. This study highlights the significant impacts that high-quality organic matter fertilization can exert on agricultural soil microbiomes and adds to the growing body of knowledge on using organic fertilizers as a way to steer the soil microbiome toward a healthier soil.

Heisey, Steven↗
DOE OSTI2024

Pore Structures in Detritusphere of Soils Under Switchgrass and Restored Prairie Vegetation Community

Root detritusphere, that is, the soil in the vicinity of decomposing root residues, plays an important role in soil microbial activity and C sequestration. Pore structure (size distributions and connectivity of soil pores) in the detritusphere serves as a major driver for these processes and, in turn, is influenced by the physical characteristics of both soil and roots. This study compared pore structure characteristics in the root detritusphere of soils of contrasting texture and mineralogy subjected to > 6 years of contrasting vegetation: monoculture switchgrass and polyculture prairie systems. Soil samples were collected from five experimental sites in the US Midwest representing three soil types. Soil texture and mineralogy were measured using a hydrometer and x-ray powder diffraction, respectively. The intact cores were scanned with x-ray computed micro-tomography to identify visible soil pores, biopores, and particulate organic matter (POM). We specifically focused on pore structure within the detritusphere around the POM of root origin. Results showed that the detritusphere of coarser textured soils, characterized by high sand and quartz contents, had lower porosity in the vicinity of POM compared with finer textured soils. POM vicinities in finer textured soils had high proportions of large (> 300 μm diameter) pores, and their pores were better connected than in the coarser soils. Lower porosity in the outer (> 1 mm) parts of the detritusphere of switchgrass than of prairie suggested soil compaction by roots, with the effect especially pronounced in the coarser soils. Here, the results demonstrated that soil texture and mineralogy played a major, while vegetation played a more modest, role in defining the pore structure in the root detritusphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Structural characterization of a soil viral auxiliary metabolic gene product – a functional chitosanase

Metagenomics is unearthing the previously hidden world of soil viruses. Many soil viral sequences in metagenomes contain putative auxiliary metabolic genes (AMGs) that are not associated with viral replication. Here, we establish that AMGs on soil viruses actually produce functional, active proteins. We focus on AMGs that potentially encode chitosanase enzymes that metabolize chitin – a common carbon polymer. We express and functionally screen several chitosanase genes identified from environmental metagenomes. One expressed protein showing endo-chitosanase activity (V-Csn) is crystalized and structurally characterized at ultra-high resolution, thus representing the structure of a soil viral AMG product. This structure provides details about the active site, and together with structure models determined using AlphaFold, facilitates understanding of substrate specificity and enzyme mechanism. Our findings support the hypothesis that soil viruses contribute auxiliary functions to their hosts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Effects of Cinnamomum camphora coppice planting on soil fertility, microbial community structure and enzyme activity in subtropical China

Cinnamomum camphora ( C. camphora ) is a broad-leaved evergreen tree cultivated in subtropical China. Currently, the use of C. camphora clonal cuttings for coppice management has become popular. However, the effects of C. camphora coppice planting on soil abiotic and biotic variances remained unclear. In this study, we collected soil from three points in the seven-year C. camphora coppice planting land: under the tree canopy (P15), between trees (P50), and abandoned land (Control) to investigate the effects of C. camphora coppice planting on soil fertility, microbial community structure and enzyme activity. The results revealed that C. camphora coppice planting significantly increased soil fertility in the point under the tree canopy (P15) and point between trees (P50), and P15 had more significant effects than P50. Meanwhile, in P15 and P50, soil bacterial, fungal alpha-diversity were improved and microbial community structures were also changed. And the changes of soil organic carbon and total nitrogen promote the transformation of soil bacterial, fungal community structures, respectively. In addition, C. camphora coppice planting significantly ( p < 0.05) increased soil urease (UE), polyphenol oxidase, and peroxidase activities, while significantly decreased soil ACP activity. This study demonstrated that the C. camphora coppice planting could improve soil fertility in subtropical China, which promoted the transformation of soil microbial community from oligotrophs ( K -strategist) to copiotrophs ( r -strategist). Thus, this work can provide a theoretical basis for soil nutrient variation and productive management of C. camphora coppice plantation in subtropical China.

Sun, Luyuan↗
DOE OSTI2022

Soil pH influences the structure of virus communities at local and global scales

The influence of biotic and abiotic factors on viral communities across environmental gradients in soil is relatively unknown. While soil pH strongly influences microbial community structure, it is unclear whether there is a similar influence on soil viruses. In this study, prokaryotic and viral communities were characterized in soils from a long-term pH-manipulated soil gradient (pH 4.5 and 7.5), and viral populations also compared to those of other soils ranging in pH (4.0–7.5). Viral communities were significantly influenced by pH at the local scale with 99% of viral operational taxonomic units restricted to pH 4.5 or 7.5 soil only. Analysis of viromes from six other European and North American soil systems demonstrated that a selection of viral clusters from acidic and neutral pH soils were more associated with those from the local gradient pH 4.5 or 7.5 soils, respectively. While direct pH effects on virion integrity and indirect selection via host composition were not distinguished, the results reveal that soil pH is a factor in structuring viral communities at local and global scales.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Multisubstrate DNA stable isotope probing reveals guild structure of bacteria that mediate soil carbon cycling

Significance Soil organic matter contains a large fraction of global C whose fate is largely governed by soil microbial communities. Global C-cycle models can be improved using information about microbial processes in soil, but the inner workings of soil communities remain largely hidden from view. We used stable isotopes to characterize the guild structure of soil bacteria based on how they assimilated C from different sources. Guild structure corresponded with growth dynamics and rrn copy number. We also show that this guild structure explains microbial biogeographical patterns at continental and global scales. These results suggest that microbial contributions to soil C cycling are largely governed by an anabolic process that governs energy allocation to growth, competition, and survival.

59 BASIC BIOLOGICAL SCIENCES↗