SEARCH · Search NASA

Results for “Xe(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Materials Data on MgAs2(XeF8)2 by Materials Project

MgAs2(XeF8)2 crystallizes in the orthorhombic Pbam space group. The structure is one-dimensional and consists of two MgAs2(XeF8)2 ribbons oriented in the (1, 0, 0) direction. Xe is bonded in a linear geometry to two F atoms. There are one shorter (2.02 Å) and one longer (2.14 Å) Xe–F bond lengths. Mg is bonded to six F atoms to form MgF6 octahedra that share corners with four equivalent AsF6 octahedra. The corner-sharing octahedral tilt angles are 30°. There are two shorter (1.96 Å) and four longer (2.05 Å) Mg–F bond lengths. As is bonded to six F atoms to form AsF6 octahedra that share corners with two equivalent MgF6 octahedra. The corner-sharing octahedral tilt angles are 30°. There are a spread of As–F bond distances ranging from 1.75–1.83 Å. There are six inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one As atom. In the second F site, F is bonded in a bent 150 degrees geometry to one Mg and one As atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one As atom. In the fifth F site, F is bonded in a single-bond geometry to one As atom. In the sixth F site, F is bonded in a linear geometry to one Xe and one Mg atom.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Pseudorapidity dependence of anisotropic flow and its decorrelations using long-range multiparticle correlations in Pb–Pb and Xe–Xe collisions

The pseudorapidity dependence of elliptic (v 2 ), triangular (v 3 ), and quadrangular (v 4 ) flow coefficients of charged particles measured in Pb–Pb collisions at a centre-of-mass energy per nucleon pair of $\sqrt{S_{NN}}$ = 5.02 TeV and in Xe–Xe collisions at $\sqrt{S_{NN}}$ = 5.44 TeV with ALICE at the LHC are presented. The measurements are performed in the pseudorapidity range − 3.5 < η < 5 for various centrality intervals using two- and multi-particle cumulants with the subevent method. The flow probability density function (p.d.f.) is studied with the ratio of flow coefficient v 2 calculated with four- and two-particle cumulant, and suggests that the variance of flow p.d.f. is independent of pseudorapidity. The decorrelation of the flow vector in the longitudinal direction is probed using two-particle correlations. The results measured with respect to different reference regions in pseudorapidity exhibit differences, argued to be a result of saturating decorrelation effect above a certain pseudorapidity separation, in contrast to previous publications which assign this observation to non-flow effects. The results are compared to 3 + 1 dimensional hydrodynamic and the AMPT transport model calculations. Neither of the models is able to simultaneously describe the pseudorapidity dependence of measurements of anisotropic flow and its fluctuations. The results presented in this work highlight shortcomings in our current understanding of initial conditions and subsequent system expansion in the longitudinal direction. Therefore, they provide input for its improvement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

In-situ irradiation of uranium carbide

Uranium carbide (UC) is a leading candidate fuel for Generation IV reactors due to its high uranium density and thermal conductivity. However, its irradiation performance—particularly gas bubble swelling and defect dynamics—remains poorly characterized. Using in-situ transmission electron microscopy (TEM), we irradiated UC with 300 keV Xe + and 1 MeV Kr 2+ ions at temperatures up to 900 °C to quantify swelling behavior and dislocation loop evolution. The swelling remained below 0.6 % across all temperatures, suggesting the dimensional stability of UC under irradiation at these temperatures. Dislocation loops grew faster in UC than in UO 2 or UN, correlating with its lower homologous temperature. Notably, nanograin structures emerged in thin regions of the lamellar, mirroring phenomena previously observed in UO 2 and ZrC. These results address critical knowledge gaps in the radiation tolerance of UC and provide insight into its suitability for advanced reactor systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Thermal transport across nanoscale damage profile in sapphire irradiated by swift heavy ions

In this work, we studied the degradation of thermal conductivity in single crystal sapphire (α-Al 2 O 3 ) irradiated by 167 MeV Xe swift heavy ions (SHIs) over the multiple fluences in the range of 10 12 –10 14 ions/cm 2 . Thermal conductivity was measured primarily in the cross-plane direction using a noncontact ultrafast optical pump-probe technique called picosecond time domain thermoreflectance (TDTR). Multiple samples with variable ion fluences allowed us to probe distinct regions resulting from different regimes of microstructure evolution caused by electronic energy loss. By tuning the penetration depth of the thermal waves using different modulation frequencies, two regions with distinct conductivities were identified and the values of which were found to be consistent with phonon-mediated thermal transport models while the microstructure was confirmed by electron microscopy characterization. These damaged regions were determined to be a several micrometer thick ion track region and several tens of nanometer-thick amorphous layer present only above 5.0 × 10 13 ions/cm 2 . These results demonstrate the applicability of TDTR to resolve thermal transport behavior in SHI irradiated oxides having nonhomogeneous damage profile on a nanometer scale. The presented approach facilitates future studies aiming at resolving the impact of distinct damage resulting from electronic and nuclear stopping regimes under irradiation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Materials Data on XeN2(OF4)2 by Materials Project

XeF8(NO)2 is Cotunnite structured and crystallizes in the orthorhombic Pnma space group. The structure is zero-dimensional and consists of eight nitroxyl molecules and four XeF8 clusters. In each XeF8 cluster, Xe is bonded in a 8-coordinate geometry to eight F atoms. There are a spread of Xe–F bond distances ranging from 2.05–2.31 Å. There are five inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom. In the fifth F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Depth-resolved thermal conductivity and damage in swift heavy ion irradiated metal oxides

We investigated thermal transport in swift heavy ion (SHI) irradiated insulating single crystalline oxide materials: yttrium aluminum garnet- Y 3 Al 5 O 12 (YAG), sapphire (Al 2 O 3 ), zinc oxide (ZnO) and magnesium oxide (MgO) irradiated by 167 MeV Xe ions at 10 12 – 10 14 ions/cm 2 fluences. Depth profiling of the thermal transport on nano- and micro- meter scales was assessed by time-domain thermoreflectance (TDTR) and modulated thermoreflectance (MTR) methods, respectively. This combination allowed us to isolate the conductivities of different sub-surface damage-regions characterized by their distinct microstructure evolution regimes. Thermal conductivity degradation in SHI irradiated YAG and Al 2 O 3 is attributed to formation of ion tracks and subsequent amorphization, while in ZnO and MgO it is mostly due to point defects. Additionally, notably lower conductivity when probed by very low penetrating thermal waves is consistent with surface hillock formation. An analytical model based on Klemens-Callaway method for thermal conductivity coupled with a simplified microstructure evolution capturing saturation in defect concentration was used to obtain depth dependent damage across the ion impacted region. The studies showed that YAG has the highest damage profile resulting in the less dependence of thermal conductivity with the depth, while MgO on the contrary has the strongest dependence. The presented work sheds new light on how SHI induced defects affect thermal transport degradation and recovery of oxide ceramics as promising candidates for next generation nuclear reactor applications.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on AgP(XeF5)2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on AgAs(XeF5)2 by Materials Project

36 MATERIALS SCIENCE↗

DOE OSTI2021

Pressure Effects on the Relaxation of an Excited Ethane Molecule in High-Pressure Bath Gases

Here, we use molecular dynamics to calculate the rotational and vibrational energy relaxation of C 2 H 6 in Ar, Kr, and Xe bath gases over a pressure range of 10 to 400 atm and at temperatures of 300 K and 800 K. The C 2 H 6 is instantaneously excited by 80 kcal/mol randomly distributed into both vibrational and rotational modes. The computed relaxation rates show little sensitivity to the identity of the noble gas in the bath. Vibrational relaxation rates show a non-linear pressure dependence at 300 K. At 800 K the reduced range of bath gas densities covered by the range of pressures do not yet show any non-linearity in the pressure dependence. Rotational relaxation is characterized with two relaxation rates. The slower rate is comparable to the vibrational relaxation rate. The faster rate has a linear pressure dependence at 300 K but an irregular, nonlinear pressure dependence at 800 K. To understand this, a model was developed based on approximating the periodic box used in the molecular dynamics simulations by an equal-volume collection of cubes where each cube is sized to allow only single occupancy by the noble gas or the molecule. Combinatorial statistics then leads to a pressure and temperature dependent analytic distribution of the bath gas species the molecule encounters in a collision. This distribution, the dissociation energy of molecule/bath gas complexes and bath gas clusters, and the computed energy release per collision combine to show that only at 300 K is the energy release sufficient to dissociate likely complexes and clusters. This suggests that persistent and pressure-dependent clusters and complexes at 800 K may be responsible for the non-linear pressure dependence of rotational relaxation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Analysis methods for quantifying Xe-127 samples from the UNESE project

In the Underground Nuclear Explosions Signatures Experiment (UNESE) radioactive 37 Ar and 127 Xe were used as tracers in subsurface migration experiments. As part of the experiment, methods were developed to quantify 127 Xe via β-γ coincidence spectroscopy. Later examination of the results highlighted a weakness of this analysis method in samples with no 127 Xe present, so a reanalysis of samples was performed to identify those which were falsely identified as having 127 Xe present. Ongoing work to develop a new analysis method with targeted regions of interest is also described. Measurements were also performed to quantify the concentration of 127 Xe and 37 Ar which were injected as part of UNESE Phase 2. A best value for the concentration of 37 Ar and 127 Xe was determined and reported here for use in future analyses of the UNESE Phase 2 results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

133Xe Noble Gas Mass Spectrometry Measurement for High Purity Germanium Detector Performance Verification

Idaho National Laboratory produces quality control standards for laboratories that operate xenon radionuclide monitoring systems. Activities reported with each quality control standard are quantified using high purity germanium detectors. A collection of measurement capabilities are being set up at Idaho National Laboratory to establish an in-house high purity germanium detector performance verification system, with noble gas mass spectrometry being one of these measurement capabilities. The first noble gas mass spectrometry and high purity germanium measurement comparison is presented here. A Xe-133 gas sample was prepared and the activity was quantified with high purity germanium detectors. The Xe-133 sample was diluted with a known quantity of isotopically enriched Xe-126 gas; the resulting Xe-133 : Xe-126 atom ratio was calculated to be 1.15x10-4 +/- 2% at reference time t. An aliquot of this gas sample containing approximately 10 million Xe-133 atoms was introduced into a ThermoFisher Scientific Helix MC Plus noble gas mass spectrometer for analysis. The measured Xe-133 : Xe-126 atom ratio was determined to be 1.10x10-4 +/- 2% (1-sigma uncertainty) at reference time t, about 4.3% lower than the atom ratio determined with the measured high purity germanium activity.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

DOE OSTI2020

Materials Data on OsXe(O2F3)2 by Materials Project

XeOF4OsO3F2 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of one OsO3F2 cluster and two XeOF4 clusters. In the OsO3F2 cluster, Os is bonded in a 6-coordinate geometry to three O and three F atoms. All Os–O bond lengths are 1.71 Å. There are a spread of Os–F bond distances ranging from 1.96–2.16 Å. There are three inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one Os atom. In the second O site, O is bonded in a single-bond geometry to one Os atom. In the third O site, O is bonded in a single-bond geometry to one Os atom. There are two inequivalent F sites. In the first F site, F is bonded in a water-like geometry to two equivalent Os atoms. In the second F site, F is bonded in a single-bond geometry to one Os atom. In each XeOF4 cluster, Xe is bonded in a square pyramidal geometry to one O and four F atoms. The Xe–O bond length is 1.83 Å. There are two shorter (2.03 Å) and two longer (2.04 Å) Xe–F bond lengths. O is bonded in a single-bond geometry to one Xe atom. There are four inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on Os2Xe(O3F5)2 by Materials Project

XeF5Os2O6F5 crystallizes in the orthorhombic Pnma space group. The structure is zero-dimensional and consists of four Os2O6F5 clusters and four XeF5 clusters. In each Os2O6F5 cluster, Os is bonded to three O and three F atoms to form distorted corner-sharing OsO3F3 octahedra. The corner-sharing octahedral tilt angles are 24°. There is two shorter (1.71 Å) and one longer (1.72 Å) Os–O bond length. There are a spread of Os–F bond distances ranging from 2.00–2.17 Å. There are three inequivalent O sites. In the first O site, O is bonded in a single-bond geometry to one Os atom. In the second O site, O is bonded in a single-bond geometry to one Os atom. In the third O site, O is bonded in a single-bond geometry to one Os atom. There are three inequivalent F sites. In the first F site, F is bonded in a bent 150 degrees geometry to two equivalent Os atoms. In the second F site, F is bonded in a single-bond geometry to one Os atom. In the third F site, F is bonded in a single-bond geometry to one Os atom. In each XeF5 cluster, Xe is bonded in a distorted square pyramidal geometry to five F atoms. There is three shorter (1.98 Å) and two longer (1.99 Å) Xe–F bond length. There are four inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Materials Data on Hg2Te4Xe3(O2F13)2 by Materials Project

(XeF2)3(HgTe2(OF5)2)2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four HgTe2(OF5)2 clusters and six XeF2 clusters. In each HgTe2(OF5)2 cluster, Hg is bonded in a linear geometry to two O atoms. There are one shorter (2.06 Å) and one longer (2.07 Å) Hg–O bond lengths. There are two inequivalent Te sites. In the first Te site, Te is bonded in an octahedral geometry to one O and five F atoms. The Te–O bond length is 1.87 Å. There is two shorter (1.88 Å) and three longer (1.89 Å) Te–F bond length. In the second Te site, Te is bonded in an octahedral geometry to one O and five F atoms. The Te–O bond length is 1.88 Å. There are a spread of Te–F bond distances ranging from 1.87–1.89 Å. There are two inequivalent O sites. In the first O site, O is bonded in a bent 120 degrees geometry to one Hg and one Te atom. In the second O site, O is bonded in a bent 120 degrees geometry to one Hg and one Te atom. There are ten inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Te atom. In the second F site, F is bonded in a single-bond geometry to one Te atom. In the third F site, F is bonded in a single-bond geometry to one Te atom. In the fourth F site, F is bonded in a single-bond geometry to one Te atom. In the fifth F site, F is bonded in a single-bond geometry to one Te atom. In the sixth F site, F is bonded in a single-bond geometry to one Te atom. In the seventh F site, F is bonded in a single-bond geometry to one Te atom. In the eighth F site, F is bonded in a single-bond geometry to one Te atom. In the ninth F site, F is bonded in a single-bond geometry to one Te atom. In the tenth F site, F is bonded in a single-bond geometry to one Te atom. In each XeF2 cluster, Xe is bonded in a linear geometry to two F atoms. There are one shorter (2.08 Å) and one longer (2.09 Å) Xe–F bond lengths. There are two inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Probe nuclear structure using the anisotropic flow at the Large Hadron Collider

Abstract Recent studies have shown that the shape and radial profile of the colliding nuclei have strong influences on the initial condition of the heavy ion collisions and the subsequent development of the anisotropic flow. Using A Multi-Phase Transport model (AMPT) model, we investigated the impact of nuclear quadrupole deformation $$\beta _2$$ β 2 and nuclear diffuseness $$a_0$$ a 0 of $$^{129}$$ 129 Xe on various of flow observables in Xe–Xe collisions at $$\sqrt{s_{\textrm{NN}}}=$$ s NN = 5.44 TeV. We found that $$\beta _2$$ β 2 has a strong influence on central collisions while $$a_0$$ a 0 mostly influences the mid-central collisions. The relative change of flow observables induced by a change in $$\beta _2$$ β 2 and $$a_0$$ a 0 are also found to be insensitive to the values of parameters controlling the strength of the interaction among final state particles. Our study demonstrates the potential for constraining the initial condition of heavy ion collisions using future system scans at the LHC.

Physics↗

DOE OSTI2021

Experimental studies on photoabsorption by endohedral fullerene ions with a focus on Xe@C 60 + confinement resonances

A brief overview on the status of experimental investigations into photoionization and fragmentation of fullerenes and endohedral fullerenes by absorption of a single short-wavelength photon is presented. The focus of this paper is on the endohedral Xe@C 60 + molecular ion in which a xenon atom is centrally encapsulated inside a C$^{+}_{60}$ fullerene cage. Confinement resonances that result from the interference of Xe photoelectron matter waves emerging from the C$^{+}_{60}$ cavity were studied by exposing Xe@C 60 + ions to synchrotron radiation of 60 to 150 eV energy which is the region of the well-known giant atomic Xe 4d excitation resonance. Photoions Xe@C n q+ (with final charge states q = 2,3,4 of the product ions and numbers of carbon atoms left in the cage) were recorded as a function of photon energy and cross sections for the individual reaction channels were determined. In addition to previous work, new final channels (q = 2; n = 60, 58 and q = 4; n = 58, 56) were observed, and thus, about 70% of the oscillator strength expected for the encapsulated Xe atom in the investigated energy range could be recovered. The present results establish the first and, so far, only conclusive experimental observation of confinement resonances in an endohedral fullerene. The data are in remarkable agreement with relativistic R-matrix calculations that accompanied the previous experimental work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Evolution of collectivity in 118 Xe

A recoil-distance Doppler shift experiment has been performed using the Pd 102 ( F 19 , p 2 n ) reaction at a beam energy of 73 MeV to measure the lifetime of excited states in Xe 118 . Additionally, the differential decay-curve method using γ γ coincidences and a gating procedure that allows to extract the lifetime without feeding assumptions has been employed. The lifetimes obtained for the yrast states up to spin-parity 8 + are compared with interacting boson model calculations and Xe 118 can be classified as a transitional nucleus between the spherical and a deformed shape. Systematics of the B ( E 2 ) values for the 2 + → 0 + and 4 + → 2 + transitions in the isotopic chains of tin, tellurium and xenon are presented. It is proposed that a “critical point” exists at which the B ( E 2 ; 4 + → 2 + ) / B ( E 2 ; 2 + → 0 + ) ratio drops to unity for lower neutron numbers within the isotopic chain. The position of the “critical point” varies with proton number, i.e., it is presumed to be located at the same mass number A = 114 in the Sn, Te, and Xe isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

In situ inelastic neutron scattering of mixed CH 4 –CO 2 hydrates

An abundant source of CH 4 can be found in natural hydrate deposits. Recent demonstration of CH 4 recovery from hydrates via CO 2 exchange has revealed the potential as a fuel source that also provides a medium for carbon sequestration. It is vital to understand the structural and dynamic impacts of guest variation in CH 4 , CO 2 , and mixed hydrates and link the results to the stability of various deposits in nature, harvesting methane, and sequestering CO 2 . Molecular vibrations are examined in CH 4 , CO 2 , and mixed CH 4 -CO 2 hydrates at 5 and 190 K and Xe hydrates for comparison. Inelastic neutron scattering (INS) is an ideal spectroscopy technique to observe the dynamic modes in the hydrate structure and enclathrated CH 4 , as it is extremely sensitive to 1 H. The presence of CO 2 in hydrates tightens the lattice. It introduces more active librational modes to the host lattice, while hindering the motion of CH 4 in mixed CH 4 -CO 2 hydrate at 5 K. At 190 K, a large broadening of the CH 4 librational modes indicates disorder in the structure leading to dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗