SEARCH · Search NASA

Results for “Yield Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Classifying Multi-Model Wheat Yield Impact Response Surfaces Showing Sensitivity to Temperature and Precipitation Change

Crop growth simulation models can differ greatly in their treatment of key processes and hence in their response to environmental conditions. Here, we used an ensemble of 26 process-based wheat models applied at sites across a European transect to compare their sensitivity to changes in temperature (minus 2 to plus 9 degrees Centigrade) and precipitation (minus 50 to plus 50 percent). Model results were analysed by plotting them as impact response surfaces (IRSs), classifying the IRS patterns of individual model simulations, describing these classes and analysing factors that may explain the major differences in model responses. The model ensemble was used to simulate yields of winter and spring wheat at four sites in Finland, Germany and Spain. Results were plotted as IRSs that show changes in yields relative to the baseline with respect to temperature and precipitation. IRSs of 30-year means and selected extreme years were classified using two approaches describing their pattern. The expert diagnostic approach (EDA) combines two aspects of IRS patterns: location of the maximum yield (nine classes) and strength of the yield response with respect to climate (four classes), resulting in a total of 36 combined classes defined using criteria pre-specified by experts. The statistical diagnostic approach (SDA) groups IRSs by comparing their pattern and magnitude, without attempting to interpret these features. It applies a hierarchical clustering method, grouping response patterns using a distance metric that combines the spatial correlation and Euclidian distance between IRS pairs. The two approaches were used to investigate whether different patterns of yield response could be related to different properties of the crop models, specifically their genealogy, calibration and process description. Although no single model property across a large model ensemble was found to explain the integrated yield response to temperature and precipitation perturbations, the application of the EDA and SDA approaches revealed their capability to distinguish: (i) stronger yield responses to precipitation for winter wheat than spring wheat; (ii) differing strengths of response to climate changes for years with anomalous weather conditions compared to period-average conditions; (iii) the influence of site conditions on yield patterns; (iv) similarities in IRS patterns among models with related genealogy; (v) similarities in IRS patterns for models with simpler process descriptions of root growth and water uptake compared to those with more complex descriptions; and (vi) a closer correspondence of IRS patterns in models using partitioning schemes to represent yield formation than in those using a harvest index. Such results can inform future crop modelling studies that seek to exploit the diversity of multi-model ensembles, by distinguishing ensemble members that span a wide range of responses as well as those that display implausible behaviour or strong mutual similarities.

Classification; Climate change; Crop model; Ensemb↗

DOE OSTI2020

Framework For Spatial Agricultural Crop Yield Prediction Model Development

This framework was developed to provide data preprocessing for spatiotemporal agricultural yield data and remote sensing data for modelling using artificial neural networks (ANNs) to predict subfield crop yield estimates. The software includes methods to train, validate, and test ANN models. It also include methods to infer on new remote sensing data.

Griffel, LloydM.↗

NASA NTRS1980

Multi-Parameter Yield Zone Model for Predicting Spectrum Crack Growth

A systematic technique is presented for modeling crack growth load interaction effects due to spectrum loading. The Multi-Parameter Yield Zone (MPYZ) model accounts for crack growth retardation, acceleration, and underload effects. The load interactions are attributed to the residual stress intensity due to the plastic deformation at the crack tip. Fatigue crack growth was predicted and compared with test data for a variety of spectrum loadings.

Johnson, W. S.↗

NASA NTRS2022

Global Gridded Crop Models Underestimate Yield Responses to Droughts and Heatwaves

Extreme events can lead to crop yield declines, resulting in financial losses and threats to food security, and the frequency and intensity of such events is projected to increase. As global gridded crop models (GGCMs) are commonly used to assess climate change impacts on agricultural yields, there is a need to understand whether these models are able to reproduce the observed yield declines. We evaluated 13 GGCMs from the Inter-Sectoral Impact Model Intercomparison Project and compared observed and simulated impact of past droughts and heatwaves on yields for four crops (maize, rice, soy, wheat). We found that most models detect but underestimate the impact of droughts and heatwaves on yield. Specifically, the drought signal was detected by 12 of 13 models for maize and all models for wheat, while the heat signal was detected by eleven models for maize and six models for wheat. To investigate whether the difference between simulated and observed yield declines is due to a misrepresentation of simulated exposure to heat or water scarcity (i.e. misrepresentation of growing season), we analysed the relationship between average discrepancies between observed and simulated yield losses, and average simulated exposure to extreme weather conditions across all crop models. We found a positive correlation between simulated exposure to heat and model performance for heatwaves, but found no correlation for droughts. This suggests that there is a systematic underestimation of yield responses to heat and drought and not only a misrepresentation of exposure. Assuming that performance for the past indicates models' capacity to project future yield impacts, models likely underestimate future yield decline from climate change. High-quality temporally and spatially resolved observational data on growing seasons will be highly valuable to further improve crop models' capacity to adequately respond to extreme weather events.

extreme events↗

NASA NTRS1984

Brazil soybean yield covariance model

A model based on multiple regression was developed to estimate soybean yields for the seven soybean-growing states of Brazil. The meteorological data of these seven states were pooled and the years 1975 to 1980 were used to model since there was no technological trend in the yields during these years. Predictor variables were derived from monthly total precipitation and monthly average temperature.

Callis, S. L.↗

NASA NTRS1984

Brazil wheat yield covariance model

A model based on multiple regression was developed to estimate wheat yields for the wheat growing states of Rio Grande do Sul, Parana, and Santa Catarina in Brazil. The meteorological data of these three states were pooled and the years 1972 to 1979 were used to develop the model since there was no technological trend in the yields during these years. Predictor variables were derived from monthly total precipitation, average monthly mean temperature, and average monthly maximum temperature.

Callis, S. L.↗

DOE OSTI2026

Microwave-Assisted Plastic Upcycling: Dynamic Data Reconciliation, Parameter Estimation, and Kinetic Modeling

Microwave (MW)-assisted catalytic pyrolysis offers a promising pathway for efficient plastic upcycling. This work develops an integrated modeling framework combining dynamic data reconciliation, a temperature-dependent rate model, and a yield model to represent the time-varying production rate of components in MW-assisted LDPE pyrolysis conducted in a batch reactor. An Arrhenius-type rate model with a temperature-dependent reaction order is developed. A biexponential correlation is proposed for the yield of gaseous products that enables to capture the evolving product formation behavior during conversion. In the yield correlation, one term is used to represent the initial increase in yield, reflecting the rapid formation of intermediate or primary products at the early stages of the reaction when a larger fraction of the reactant remains available. As conversion progresses, the influence of this term gradually diminishes. The other term accounts for the subsequent decrease in the predicted yield, representing secondary reactions such as further cracking or coke formation that reduce the concentration of certain products at higher conversion. The model is found to accurately represent reconciled experimental flow rate profiles from an in-house MW-assisted catalytic batch reactor for major products, including ethylene, ethane, 1-butene, and benzene, across 250−350 °C. Ethylene remains the dominant product but decreases from about 41.95% at 250 °C to 30.14% at 350 °C, while heavier products increase significantly, with 1-butene rising to nearly 8.37% and benzene reaching 2.17% at intermediate temperatures. The model shows that the ethylene production rate can be maximized at around 270 °C. The models developed in this work can be utilized for process optimization, reactor design and scale-up of microwave-assisted plastic conversion technologies, and economic analysis.

Damahe, Harish [West Virginia Univ., Morgantown, W↗

NASA NTRS1976

Large Area Crop Inventory Experiment (LACIE). Results of LACIE integrated drought analysis (Southern U.S. Great Plains drought 1975-76)

The development and intensification of the drought in the United States southern Great Plains was monitored during the initial growing period of the 1975-76 winter wheat crop. Because of the severity of the drought conditions, a drought analysis plan was developed and implemented beginning on March 8, 1976. Sample segments and full-frame imagery were used at 9-day intervals to identify the drought area and quantify the effects on the wheat acreage. Yield model simulations were run to extrapolate the effects of the drought on yield estimates at harvest, assuming 10 and 90 percent of normal rainfall for subsequent months and 30-day forecast. A survey of LANDSAT data for improvement of distribution of rainfall patterns in the drought area was done for April and yield models run for drought affected crop reporting districts. Special aggregations were performed by the Crop Assessment Subsystem on the drought area to evaluate the utility of remote sensing to monitor the effect of the drought on wheat area, yield, and production.

Thompson, D. R.↗

NASA NTRS2016

Incorporating Yearly Derived Winter Wheat Maps Into Winter Wheat Yield Forecasting Model

Wheat is one of the most important cereal crops in the world. Timely and accurate forecast of wheat yield and production at global scale is vital in implementing food security policy. Becker-Reshef et al. (2010) developed a generalized empirical model for forecasting winter wheat production using remote sensing data and official statistics. This model was implemented using static wheat maps. In this paper, we analyze the impact of incorporating yearly wheat masks into the forecasting model. We propose a new approach of producing in season winter wheat maps exploiting satellite data and official statistics on crop area only. Validation on independent data showed that the proposed approach reached 6% to 23% of omission error and 10% to 16% of commission error when mapping winter wheat 2-3 months before harvest. In general, we found a limited impact of using yearly winter wheat masks over a static mask for the study regions.

MODIS↗

NASA NTRS1998

A Hybrid Procedural/Deductive Executive for Autonomous Spacecraft

The New Millennium Remote Agent (NMRA) will be the first AI system to control an actual spacecraft. The spacecraft domain places a strong premium on autonomy and requires dynamic recoveries and robust concurrent execution, all in the presence of tight real-time deadlines, changing goals, scarce resource constraints, and a wide variety of possible failures. To achieve this level of execution robustness, we have integrated a procedural executive based on generic procedures with a deductive model-based executive. A procedural executive provides sophisticated control constructs such as loops, parallel activity, locks, and synchronization which are used for robust schedule execution, hierarchical task decomposition, and routine configuration management. A deductive executive provides algorithms for sophisticated state inference and optimal failure recover), planning. The integrated executive enables designers to code knowledge via a combination of procedures and declarative models, yielding a rich modeling capability suitable to the challenges of real spacecraft control. The interface between the two executives ensures both that recovery sequences are smoothly merged into high-level schedule execution and that a high degree of reactivity is retained to effectively handle additional failures during recovery.

Pell, Barney↗

NASA NTRS1978

Large Area Crop Inventory Experiment (LACIE). Feasibility of assessing crop condition and yield from LANDSAT data

The author has identified the following significant results. Yield modelling for crop production estimation derived a means of predicting the within-a-year yield and the year-to-year variability of yield over some fixed or randomly located unit of area. Preliminary studies indicated that the requirements for interpreting LANDSAT data for yield may be sufficiently similar to those of signature extension that it is feasible to investigate the automated estimation of production. The concept of an advanced yield model consisting of both spectral and meteorological components was endorsed. Rationale for using meteorological parameters originated from known between season and near harvest dynamics in crop environmental-condition-yield relationships.

Source record↗

NASA NTRS1982

Spectral estimates of solar radiation intercepted by corn canopies

Reflectance factor data were acquired with a Landsat band radiometer throughout two growing seasons for corn (Zea mays L.) canopies differing in planting dates, populations, and soil types. Agronomic data collected included leaf area index (LAI), biomass, development stage, and final grain yields. The spectral variable, greenness, was associated with 78 percent of the variation in LAI over all treatments. Single observations of LAI or greenness have limited value in predicting corn yields. The proportions of solar radiation intercepted (SRI) by these canopies were estimated using either measured LAI or greenness. Both SRI estimates, when accumulated over the growing season, accounted for approximately 65 percent of the variation in yields. Models which simulated the daily effects of weather and intercepted solar radiation on growth had the highest correlations to grain yields. This concept of estimating intercepted solar radiation using spectral data represents a viable approach for merging spectral and meteorological data for crop yield models.

Bauer, M. E.↗

NASA NTRS1976

Crop status evaluations and yield predictions

One phase of the large area crop inventory project is presented. Wheat yield models based on the input of environmental variables potentially obtainable through the use of space remote sensing were developed and demonstrated. By the use of a unique method for visually qualifying daily plant development and subsequent multifactor computer analyses, it was possible to develop practical models for predicting crop development and yield. Development of wheat yield prediction models was based on the discovery that morphological changes in plants are detected and quantified on a daily basis, and that this change during a portion of the season was proportional to yield.

Haun, J. R.↗

NASA NTRS1973

Magnetosphere structure and radiation mechanisms of pulsars

A presentation is made of the two main models of the radiation mechanism of pulsars: the light cylinder model and the polar cap model. They have to account for gamma radiation, radio and X-ray emission, and in the case of the Crab pulsar, optical radiation. It is hypothesized that pair creation is essential for radio emission. None of the models yields a theoretical pulse-width-period distribution or braking index that correlates well with observations. A revision of the polar cap model suggests that a glitch may be present in the magnetosphere, necessitating the presence of a large centrifugal force strong enough to tear open the magnetic field lines into a Y-type configuration. This model yields a braking index in line with observations.

Roberts, D. H.↗

DOE OSTI2024

BioC2G Tool v1

The BioC2G tool provides an interface for running technoeconomic analyses and life-cycle assessments of biofuel and bioproduct production pathways. Models for the pathways are currently built into the tool: limonene, limonane, bisabolene, bisabolane, ethanol, isoprenol, DMCO, and HEFA. Additionally, a "Custom" option is available for analyzing a bioproduction pathway not included among the built-in examples. Users must supply key product properties and process parameters. Three types of model runs are available in the tool: minimum selling price (MSP), water consumption, and greenhouse gas (GHG) emissions. Running the MSP model yields a breakdown of MSP by major process stage of production, along with a a table of estimated capital expenditures (CAPEX) and annual operating expenditures (OPEX). Running the water consumption and GHG models yields a breakdown of water consumed and carbon emissions respectively, per unit of end product. A breakdown of these metrics by major process stage is also provided. Model run results can be viewed in the web interface numerically and graphically, as well as downloaded in CSV format. Detailed documentation on model methodology and assumptions is also available for download.

Huntington, Tyler↗

DOE OSTI2024

High-yield implosion modeling using the Frustraum: Assessing and controlling the formation of polar jets and enhancing implosion performance with applied magnetization

Frustraums have a higher laser-to-capsule x-ray radiation coupling efficiency and can accommodate a large capsule, thus potentially generating a higher yield with less laser energy than cylindrical Hohlraums for a given Hohlraum volume [Amendt et al., Phys. Plasmas 26, 082707 (2019]. Frustraums are expected to have less m = 4 azimuthal asymmetries arising from the intrinsic inner-laser-beam geometry on the National Ignition Facility. An experimental campaign at Lawrence Livermore National Laboratory to demonstrate the high-coupling efficiency and radiation symmetry tuning of the Frustraum has been under way since 2021. Simulations benchmarked against experimental data show that implosions using Frustraums can achieve more yield with higher ignition margins than cylindrical Hohlraums using the same laser energy. Hydrodynamic jets in capsules along the Hohlraum axis, driven by radiation-flux asymmetries in a Hohlraum with a gold liner on a depleted uranium (DU) wall, are present around stagnation, and these “polar” jets can cause severe yield degradation. The early-time Legendre mode P4<0 radiation-flux asymmetry is a leading cause of these jets, which can be reduced by using an unlined DU Hohlraum because the shape of the shell is predicted to be more prolate. Magnetization can increase the implosion robustness and reduce the required hotspot ρR for ignition; therefore, magnetizing the Frustraum can maintain the same yield while reducing the required laser energy or increase the yield using the same laser energy—all under the constraint that the ignition margin is preserved. Reducing polar jets is particularly important for magnetized implosions because of the intrinsic toroidal hotspot ion temperature topology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1982

Spectral estimates of intercepted solar radiation by corn and soybean canopies

Attention is given to the development of methods for combining spectral and meteorological data in crop yield models which are capable of providing accurate estimates of crop condition and yields throughout the growing season. The present investigation is concerned with initial tests of these concepts using spectral and agronomic data acquired in controlled experiments. The data were acquired at the Purdue University Agronomy Farm, 10 km northwest of West Lafayette, Indiana. Data were obtained throughout several growing seasons for corn and soybeans. Five methods or models for predicting yields were examined. On the basis of the obtained results, it is concluded that estimating intercepted solar radiation using spectral data is a viable approach for merging spectral and meteorological data in crop yield models.

Gallo, K. P.↗

DOE OSTI2021

Assessment of the Amplification Factor Transport Transition Model for High-Mach Number Flows

In its present state, the Amplification Factor Transport (AFT) model provides an efficient alternative for high-fidelity stability methods for complex geometries subject to low-speed conditions considered in the industrial-production CFD environment. Its performance has not yet been documented for the typical transition scenarios in hypersonic conditions. The goal of the present study is to apply the AFT model to a yawed- and flared-cone configuration, for which the laminar flows respectively support the crossflow and second-mode instability mechanisms, and to compare the amplification results against high-fidelity results computed with Linear Parabolized Stability Equations (LPSE). High-resolution viscous-flow solutions are provided with OVERFLOW and COFFE. For the yawed-cone case, the AFT model yields the largest amplification in a region of the flow where the expected crossflow instability is not amplified (in the leeward symmetry plane) according to LPSE. For the flared-cone case with a wall-temperature slightly lower than the adiabatic value, the AFT model yields extremely large amplification factors (in excess of 100), exceeding the computed LPSE amplification of second-mode instability results by a factor 14. Upon considering a cold-wall condition, the model shows much smaller amplification factors, which is the opposite with respect to the expected behavior of the second mode. The AFT model does not adequately capture the crossflow and second-mode instability mechanisms in its present state.

Groot, Koen J.↗