Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic chain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

What is the Best Alternative to Diagonalization of the Hamiltonian in Large Scale Semiempirical Calculations?

Recently, several linear scaling approaches have been introduced which replace the time dominating diagonalization step in semiempirical methods, enabling practical calculations to be performed, on very large molecules. This paper compares the accuracy and performance of pseudodiagonalization (PD), conjugate gradient density matrix search (CG-DMS), the Chebyshev polynomial expansion method (CEM), and purification of the density matrix (PDM) as linear scaling substitutions for diagonalization. The scaling, speed, and reliability of these methods are compared for AMI single point energy calculations on polyglycine chains (up to 20,000 atoms), water clusters (up to 12,300 atoms), and nucleic acids (up to 6300 atoms).

Daniels, Andrew D.↗
DOE OSTI2025

Side-Chain and Ring-Size Effects on Permeability in Artificial Water Channels

Artificial water channels (AWCs) have emerged as a promising framework for stable water permeation, with water transport rates comparable to aquaporins (3.4–40.3 × 10 8 H 2 O/channel/s). In this study, we probe the influence of ring-size and side-chain length on the water permeability observed within a class of AWCs termed ligand-appended pillar[n]arenes (LAPs) that have an adjustable ring-size (m) and side-chain length (n). Through all-atom molecular dynamics simulations, we calculate the permeability of these channels using the collective diffusion model and find their permeabilities. We characterize the mechanistic influence of pillar[n]arene ring-size and side-chain length on the channel water permeability by analyzing the characteristics of the internal permeating water-wire and the surrounding channel structure. We observe that water permeability decreases as a function of increasing ring-size due to increases in hydrophilic contacts between the permeating water-wire and the oxygen groups on the channel wall. Further, we observe an increase in water permeability as a function of side-chain length due to increased partitioning of the channel terminal groups into the hydrophilic blocks of the surrounding bilayer. For the LAP6 channel, with increase in side-chain length, the distance between terminal groups increases and leads to an increase in pore size, thereby enhancing water permeability. In the case of LAP5, as side-chain length increases, the channel displays a compensatory effect between tilt and bend angle due to the flexible side-chains. Such flexibility leads to higher terminal group partitioning in the hydrophilic blocks of the bilayer and extends the permeating water-wire. Furthermore, this increase in water-wire length and hydrophilic block access overcomes the nonmonotonic pore size trend in pillar[5]arene channels.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reactions of the ˙NO 3 radical with nuclear extraction ligands in alkane solution

Here, the reactivity of the nitrate radical (NO 3 ˙) with organophosphorus and amidic actinide and lanthanide complexing agents of interest to nuclear solvent extraction applications was measured, resulting in the first-ever reported bimolecular rate constants for this radicals’ reactions in dodecane solution. The order of reactivity for neutral organophosphorus compounds showed faster rate constants with increasing electron density on the phosphoryl phosphorus atom, indicating an increasing facility for electron abstraction reactions occurring in addition to H-atom abstraction from the ligand alkane chains. The only acidic organophosphorus compound investigated, HEH[EHP], showed low reactivity with the NO 3 ˙ radical, attributed to its dimerization in this non-polar solvent. Amide ligand reaction rates were faster than for organophosphorus molecules, suggesting more facile H-atom abstraction from carbonyl activated methylene and amyl groups. While all rate constants were slower than the diffusion-limited rate they were still rapid enough to result in significant oxidation of solvent extraction ligands in dodecane solution.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1999

Observation of Individual Fluorine Atom from Highly Oriented Poly (tetrafluoroethylene) Films by Atomic Force Microscopy

Direct observation of the film thickness, molecular structure and individual fluorine atoms from highly oriented poly(tetrafluoroethylene) (PTFE) films were achieved using atomic force microscopy (AFM). A thin PTFE film is mechanically deposited onto a smooth glass substrate at specific temperatures by a friction transfer technique. Atomic resolution images of these films show that the chain-like helical structures of the PTFE macromolecules are aligned parallel to each other with an intermolecular spacing of 5.72 A, and individual fluorine atoms are clearly observed along these twisted molecular chains with an interatomic spacing of 2.75 A. Furthermore, the first direct AFM measurements for the radius of the fluorine-helix, and of the carbon-helix in sub-angstrom scale are reported as 1.70 A and 0.54 A respectively.

Lee, Jonathan A.,↗
NASA NTRS2000

Observation of Individual Fluorine Atoms from Highly Oriented Poly(Tetrafluoroethylene) Films by Atomic Force Microscopy

Direct observation of the film thickness, molecular structure, and individual fluorine atoms from highly oriented poly(tetrafluoroethylene) (PTFE) films were achieved using atomic force microscopy (AFM). A thin PTFE film is mechanically deposited onto a smooth glass substrate at specific temperatures by a friction-transfer technique. Atomic resolution images of these films show that the chain-like helical structures of the PTFE macromolecules are aligned parallel to each other with an intermolecular spacing of 5.72 A, and individual fluorine atoms are clearly observed along these twisted molecular chains with an interatomic spacing of 2.75 A. Furthermore, the first direct AFM measurements for the radius of the fluorine-helix, and of the carbon-helix in sub-angstrom scale are reported as 1.7 and 0.54 A respectively.

Lee, J. A.↗
DOE OSTI2024

La 4 Co 4 X ( X = Pb , Bi , Sb ) : A demonstration of antagonistic pairs as a route to quasi-low-dimensional ternary compounds

We outline how pairs of strongly immiscible elements, referred to here as antagonistic pairs, can be used to synthesize ternary compounds with low or quasi-reduced-dimensional motifs intrinsically built into their crystal structures. By identifying third elements that are mutually compatible with a given antagonistic pair, ternary compounds can be formed in which the third element segregates the immiscible atoms into spatially separated substructures. Quasi-low-dimensional structural units, such as sheets, chains, or clusters are a natural consequence of the immiscible atoms seeking to avoid close contact in the solid state. Further, as proof of principle, we present the discovery, crystal growth, and basic physical properties of La 4 ⁢Co 4 ⁢$\mathrm{X}$ (X = Pb, Bi, Sb), a family of intermetallic compounds based on the antagonistic pairs Co-Pb and Co-Bi. La 4 ⁢Co 4 ⁢$\mathrm{X}$ adopts an orthorhombic crystal structure (space group Pbam) containing quasi-two-dimensional Co slabs and La-X polyhedra that stack in an alternating manner along the α axis. Consistent with our proposal, the La atoms separate the Co and X substructures, ensuring there are no direct contacts between the members of the immiscible (antagonistic) pair. Within the Co slabs, the atoms occupy the vertices of corner sharing tetrahedra and triangles, and this bonding motif produces narrow electronic bands near the Fermi level that favor magnetism. The Co is moment bearing in each La 4 ⁢Co 4 $\mathrm{X}$ compound studied, and we show that whereas La 4 ⁢Co 4 ⁢Pb behaves as a three-dimensional antiferromagnet with T N =220K, La 4 ⁢Co 4 ⁢Bi and La 4⁢ Co 4 ⁢Sb have behavior consistent with low-dimensional magnetic coupling and ordering, with T N =153K and 143 K, respectively. In addition to the Pb-, Bi-, and Sb-based La 4 ⁢Co 4 ⁢$\mathrm{X}$ compounds, we also were likely able to produce an analogous La 4 ⁢Co 4 ⁢Sn in polycrystalline form, although we were unable to isolate single crystals. We anticipate that identifying and using mutually compatible third elements together with an antagonistic pair represents a generalizable design principle for discovering new materials and new structure types containing low-dimensional substructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In Situ Atomic Tracking on the Interfacial Etching and Reconfiguration of Cu-ReSe 2 Contact during Thermal Annealing

The Schottky barrier height can be greatly affected by the metal diffusion, reaction, and covalent bonding formation at the contact. Exploring novel methods and revealing the fundamental mechanisms for contact engineering are of vital importance for microelectronic devices. Here, in this study, the annealing induced interfacial reactions at Cu-ReSe 2 contact are dynamically revealed from the atomic scale. Accompanied by the diffusion of Se to Cu, ReSe 2 is gradually decomposed to a thin Re interlayer through a “chain-by-chain” manner. Theoretical calculations show that the Cu atoms can facilitate the chemical bond breaking of ReSe 2 , significantly lowering the Se diffusion energy barrier toward Cu. The formed Re/ReSe 2 heterostructure presents a metal-like band structure, which underscores the critical role of Cu in altering the interfacial chemistry and promoting carrier transport across the interface. Our results can provide vital insights into the contact properties of ReSe 2 and provide a possible method for fabricating high-performance ReSe 2 -based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1983

Metallization with generic metallo-organic inks

The use and fabrication of metallo-organic films are discussed. Metallo-organic compounds are ones in which a metal is linked to a long chain carbon ligand through a hetero atom such as O, S, N, P or As. Films formed by the thermal decomposition of these metallo-organics are called MOD films. In order that the products of decomposition contain only CO2, H2O, and in rare cases nitrogen compounds, and to avoid S containing products, the use of a set of metallo-organic compounds for ink fabrication where the linking hetero atom was oxygen was pioneered. These links were made from commercially available carboxylates, or synthesized from commonly available reagents. The processing is described and the molecular design criteria are given. The particular carboxylates or amine carboxylates selected were the octoates or neodecanoates, and they are described.

Vest, G. M.↗
NASA NTRS2004

Tholins as Coloring Agents on Solar System Bodies

Pre-biotic organic materials appear to be common on many small bodies in the outer Solar System, as evidenced by the color properties of these objects. We report on our continuing study of color properties in connection with the presence of complex organic solids (tholins) among the planets and their satellites, the asteroids, and the trans- Neptunian objects (Kuiper Belt objects). Most small, icy bodies in the Solar System, whether they have high or low surface reflectance (albedo), show a pronounced downward slope in reflectance at wavelengths shorter than approx. 1 micron. This increasing absorption of sunlight toward shorter wavelengths is characteristic of pi-bonds in hydrocarbons having chains or rings of conjugated C atoms. Tholins, which contain polycyclic aromatic and aliphatic hydrocarbons, exhibit these color properties. Using the complex refractive indices of tholins in models of the reflectance spectra of icy bodies in the Solar System, we find that these complex organic materials satisfactorily account for the coloration so widely observed. The new results presented here show that the wide variety of colors of Kuiper Belt objects can be fit very well with tholins, as can the colors of Pluto and Triton. The implications of these fits of Kuiper Belt objects is that complex organic material is created on their surfaces by energetic particle bombardment of native ices, and also may be accreted from external sources. In the cases of Pluto and Triton, photochemistry of their weak N2 + CH4 + CO atmospheres produces complex organic molecules that precipitate to the surface, providing local color.

Cruikshank, D. P.↗
NASA NTRS2004

Working Fluids for Increasing Capacities of Heat Pipes

A theoretical and experimental investigation has shown that the capacities of heat pipes can be increased through suitable reformulation of their working fluids. The surface tensions of all of the working fluids heretofore used in heat pipes decrease with temperature. As explained in more detail below, the limits on the performance of a heat pipe are associated with the decrease in the surface tension of the working fluid with temperature, and so one can enhance performance by reformulating the working fluid so that its surface tension increases with temperature. This improvement is applicable to almost any kind of heat pipe in almost any environment. The heat-transfer capacity of a heat pipe in its normal operating-temperature range is subject to a capillary limit and a boiling limit. Both of these limits are associated with the temperature dependence of surface tension of the working fluid. In the case of a traditional working fluid, the decrease in surface tension with temperature causes a body of the liquid phase of the working fluid to move toward a region of lower temperature, thus preventing the desired spreading of the liquid in the heated portion of the heat pipe. As a result, the available capillary-pressure pumping head decreases as the temperature of the evaporator end of the heat pipe increases, and operation becomes unstable. Water has widely been used as a working fluid in heat pipes. Because the surface tension of water decreases with increasing temperature, the heat loads and other aspects of performance of heat pipes that contain water are limited. Dilute aqueous solutions of long-chain alcohols have shown promise as substitutes for water that can offer improved performance, because these solutions exhibit unusual surface-tension characteristics: Experiments have shown that in the cases of an aqueous solution of an alcohol, the molecules of which contain chains of more than four carbon atoms, the surface tension increases with temperature when the temperature exceeds a certain value. There are also other liquids that have surface tensions that increase with temperature and could be used as working fluids in heat pipes. For example, as a substitute for ammonia, which is the working fluid in some heat pipes, one could use a solution of ammonia and an ionic surfactant.

Chao, David F.↗
NASA NTRSDate not supplied

Simulation of etch pit formation through active sites in carbon fiber micro-structures

Erosion of carbon due to oxidation does not occur uniformly but through localized etch pit formation as a result of active surface sites. In this work we demonstrate a newly developed capability to capture pitting of carbon fiber microstructures such as FiberForm, which is commonly used as the base material for NASA’s spacecraft ablative thermal protection systems (TPS). The simulations are performed at the meso-scale in order to capture the pit formation and growth using direct simulation Monte Carlo (DSMC), specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. Legacy and latest models both assume uniform reactivity of carbon surface sites with oxygen even at the meso-scale level. However, in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. The defective nature of these sites enhances their reactivity with atmospheric gases compared to the non-defective sites (2-3 orders of magnitude) and are termed as “active sites”. Thus, these sites tend to be the first to react and eventually get removed through the formation of gasses such as CO, CO2, and CN. Their removal results in all the neighboring atoms becoming defective, thus leading to chain reaction of localized carbon removal and formation of etch pits. Capturing the formation of pits during the ablation simulation of carbon micro-structures is critical to predicting their structural failure. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various reaction mechanisms such as adsorption, desorption, Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms. We have implemented the capability of a single surface having multiple site sets with different reactivities within this framework. We have used this feature to model the presence of active sites on carbon surfaces, whose reactivity is orders of magnitude higher than that of the passive sites due to the presence of defects. The active site fraction is a property of surface elements within SPARTA and is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we can capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
NASA NTRSDate not supplied

Simulation of Etch Pit Formation in DSMC Through Active Sites in Carbon Fiber Micro-Structures

Erosion of carbon due to oxidation does not occur uniformly but through localized etch pit formation because of active surface sites. In this work we demonstrate a newly developed capability to capture pitting of carbon fiber microstructures such as FiberForm, which is commonly used as the base material for NASA’s spacecraft ablative thermal protection systems (TPS). The simulations are performed at the meso-scale in order to capture the pit formation and growth using direct simulation Monte Carlo (DSMC), specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. Legacy and latest models both assume uniform reactivity of carbon surface sites with oxygen even at the meso-scale level. However, in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. The defective nature of these sites enhances their reactivity with atmospheric gases compared to the non-defective sites (2-3 orders of magnitude) and are termed as “active sites”. Thus, these sites tend to be the first to react and eventually get removed through the formation of gases such as CO, CO2, and CN. Their removal results in all the neighboring atoms becoming defective, thus leading to chain reaction of localized carbon removal and formation of etch pits. Capturing the formation of pits during the ablation simulation of carbon micro-structures is critical to predicting their structural failure. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various detailed surface reaction mechanisms. We have implemented the capability of a single surface having multiple site sets with different reactivities within this framework. We have used this feature to model the presence of active sites on carbon surfaces, whose reactivity is orders of magnitude higher than that of the passive sites due to the presence of defects. The active site fraction is a property of surface elements within SPARTA and is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we can capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
NASA NTRSDate not supplied

DSMC Simulation of Etch Pit Formation Through Active Sites in Carbon Fiber Micro-Structures

Erosion of carbon due to oxidation does not occur uniformly but through localized etch pit formation because of active surface sites. In this work we demonstrate a newly developed capability to capture pitting of carbon fiber microstructures such as FiberForm, which is commonly used as the base material for NASA’s spacecraft ablative thermal protection systems (TPS). The simulations are performed at the meso-scale in order to capture the pit formation and growth using direct simulation Monte Carlo (DSMC), specifically using the Stochastic PArallel Rarefied-gas Time-accurate Analyzer (SPARTA) code. Legacy and latest models both assume uniform reactivity of carbon surface sites with oxygen even at the meso-scale level. However, in reality the carbon surface has locally different reaction rates due to the presence of defects at the atomic scale. The defective nature of these sites enhances their reactivity with atmospheric gases compared to the non-defective sites (2-3 orders of magnitude) and are termed as “active sites”. Thus, these sites tend to be the first to react and eventually get removed through the formation of gases such as CO, CO2, and CN. Their removal results in all the neighboring atoms becoming defective, thus leading to chain reaction of localized carbon removal and formation of etch pits. Capturing the formation of pits during the ablation simulation of carbon micro-structures is critical to predicting their structural failure. Recently a detailed surface chemistry framework was developed in SPARTA, capable of incorporating various detailed surface reaction mechanisms. We have implemented the capability of a single surface having multiple site sets with different reactivities within this framework. We have used this feature to model the presence of active sites on carbon surfaces, whose reactivity is orders of magnitude higher than that of the passive sites due to the presence of defects. The active site fraction is a property of surface elements within SPARTA and is directly proportional to the local reactivity of each surface element. By introducing an initial distribution of the active site fraction across the carbon surface and propagating it in a manner that mimics the evolution of real reacting carbon surfaces, we can capture the formation and growth of etch pits as a result of surface consumption reactions such as oxidation.

DSMC↗
DOE OSTI2025

Discovery and Synthesis of a Family of Boride Altermagnets

Borides are a rich material family. To push the boundaries of borides’ properties and applications into broader fields, we have conducted systematic theoretical and experimental searches for synthesizable phases in ternary borides TM 2 B 2 (T = 3d, M = 4d/5d transition metals). We find that TM 2 B 2 in the FeMo 2 B 2 -type and CoW 2 B 2 -type structures form a large family of stable/metastable materials of 120 members. Among them, we identify 40 materials with stable magnetic solutions. Further, we discover 11 altermagnets in the FeMo 2 B 2 -type structure. So far, boride altermagnets are rare. In these altermagnets, T = Fe or Mn atoms are arranged in parallel T-chains with strong ferromagnetic intrachain couplings and antiferromagnetic interchain couplings. They simultaneously exhibit electronic band spin splitting, typical of ferromagnetism, and zero net magnetization, typical of antiferromagnetism. They also exhibit magnonic band chiral splitting. Both effects originate from the unique altermagnetic symmetries crucially constrained by the nonmagnetic atoms in the structure. Transport properties of relevance to spintronic applications, including the strain-induced spin-splitter effect and anomalous Hall effect, are predicted. An iodine-assisted synthesis method for TM 2 B 2 is developed, using which 7 of the predicted low-energy phases are experimentally synthesized and characterized, including 4 altermagnets. This work expands the realm of borides by offering new opportunities for studying altermagnetism and altermagnons in borides. It also provides valuable insights into the discovery and design of altermagnets. Here, by demonstrating that altermagnets can exist as families sharing a common motif, this work paves a feasible route for discovering altermagnets by elemental substitutions and high-throughput computations.

Chemical structure↗
NASA NTRS1990

Molecular arrangements and conformations of liquid n-tridecane chains confined between two hard walls

Monte Carlo simulations based on united CH2 atoms linked with fixed bond lengths and angles, and continuously varying torsional angles subject to appropriate interaction energies, were used to study liquid n-tridecane chains confined between two parallel hard walls with 5 mm separation. The molecules located in the central region are noted to be in very close agreement with ideal unperturbed chains. Nearly all the chain units in the first segmental layer adjacent to the walls belong to two-dimensional chains, and exhibit considerable orientational correlations between neighboring segments of different chains.

Vacatello, Michele↗
DOE OSTI2026

S 8 ring content in liquid sulfur determined from x-ray diffraction

The S 8 ring content in liquid sulfur has been determined from the 4.47 Å peak in the x-ray pair distribution function over the temperature range −55 °C –330 °C. This peak represents the characteristic 3rd and 4th nearest atom-atom distances across an S 8 -ring. Three procedures were used to calculate the S 8 -ring fraction; scaling to crystalline β-S, a linear combination fit and a direct integration method. All methods gave similar values, indicating that approximately one third of the S 8 -rings break up upon melting into a distribution of short chains with an average length of 5 ± 2 atoms. Our results contradict established models of low temperature sulfur that indicate below the λ-transition the liquid comprises almost entirely of S8-rings. In addition, we find the S 8 -ring fraction increases to 76 ± 10% at −30 °C in the supercooled liquid, and decreases to 23% ± 3% at 330 °C in the high temperature melt. First principle molecular dynamics calculations confirm the onset of dynamic ring distortion via broad bond angle distributions, associated with the interstitial region between the first and second peaks in the pair distribution function. Our results are consistent with the presence of a propensity of short chains in the low temperature liquid, that are required for the bond switching mechanism responsible for the polymerization process to occur at the λ-transition temperature, T λ .

lambda transition↗