Search NASA⌕ Search

SEARCH · Search NASA

Results for “deconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Demonstrating a butylamine-based deconstruction method for poplar biomass and conversion by diverse microbial strains

Low-boiling alkylamines such as butylamine offer promise as effective biomass pretreatment solvents that can be readily recovered and recycled; however, their capability to support microbial conversion of nutrients present in hydrolysates represents an important area for investigation. Here we employed butylamine to pretreat poplar biomass and characterize its effects on the release of fermentable sugars after solvent removal and enzymatic hydrolysis, as well as the biocompatibility of the produced hydrolysates with three organisms commonly used as bioconversion hosts. We observed that residual butylamine and the derivative butylacetamide were present in high enough concentrations to exert toxicity to strains of Aspergillus niger, Pseudomonas putida, and Rhodosporidium toruloides that produce malic acid, isoprenol and bisabolene, respectively. Removal of the toxic compounds by charcoal filtration and nutrient supplementation resulted in a hydrolysate containing >100 g L −1 of sugars that enabled strong growth, substrate consumption and bioproduct accumulation, outperforming defined cultivation media. This is the first demonstration of a butylamine-based deconstruction process for poplar biomass at a pilot-scale to achieve conversion of high sugar concentrations to valuable bioproducts with engineered microbes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Backbone editing and deconstruction of polyethylene by Beckmann rearrangement and hydrogenolysis

Polyethylene is the most widely produced commodity plastic and is used in many applications, including packaging, insulation, and medical devices. However, the inertness of polyethylene makes chemical recycling inefficient and challenging. We report the conversion of oxidized high-density and low-density polyethylene, formed by direct, catalytic oxidation, to polyamides by Beckmann rearrangement of the corresponding oximes. These polyamides have enhanced surface properties over those of unmodified polyethylene, while maintaining the same, favorable mechanical profiles. The amide sites were reductively cleaved by hydrogenolysis with ruthenium-based catalysts to furnish alcohol- and amine-terminated fragments, which were used for the synthesis of polyurea-urethanes with poly(tetrahydrofuran) and methylene diphenyl diisocyanate. These experiments show how to install cleavable moieties into the backbone of polyethylene to facilitate deconstruction and the generation of new materials to affect greater sustainability in polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Machine Learning Framework to Deconstruct the Primary Drivers for Electricity Market Price Events

As the electricity grid is moving towards a 100% Renewable Energy Source Bulk Power Grid, the overall operations of the power system operations and electricity markets are changing. The electricity markets are not only dispatching resources economically but also taking into account various controllable actions like renewable curtailment, transmission congestion mitigation, and energy storage optimization to make sure the grid is operating reliably. As a result, price formations in electricity markets have become quite complex. Traditional root cause analysis and statistical approaches are rendered inapplicable to analyze and infer the main drivers behind price formation in the modern grid and markets with variable renewable energy (VRE). In this paper, we propose a machine learning analysis framework to deconstruct some primary drivers for price formation in modern electricity markets with high renewable energy and the outcomes can be utilized for various critical aspects of market design, renewable dispatch and curtailment, operations, and cyber-security applications. The framework can be applied to any ISO or market data and in this paper it is applied to open-source publicly available datasets from California Independent System Operator (CAISO) and ISO New England.

machine learning (ML), electricity markets, Renewa↗
DOE OSTI2022

Deconstructing the root system of grasses through an exploration of development, anatomy and function

Abstract Well‐adapted root systems allow plants to grow under resource‐limiting environmental conditions and are important determinants of yield in agricultural systems. Important staple crops such as rice and maize belong to the family of grasses, which develop a complex root system that consists of an embryonic root system that emerges from the seed, and a postembryonic nodal root system that emerges from basal regions of the shoot after germination. While early seedling establishment is dependent on the embryonic root system, the nodal root system, and its associated branches, gains in importance as the plant matures and will ultimately constitute the bulk of below‐ground growth. In this review, we aim to give an overview of the different root types that develop in cereal grass root systems, explore the different physiological roles they play by defining their anatomical features, and outline the genetic networks that control their development. Through this deconstructed view of grass root system function, we provide a parts‐list of elements that function together in an integrated root system to promote survival and crop productivity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Unlocking the distinctive enzymatic functions of the early plant biomass deconstructive genes in a brown rot fungus by cell-free protein expression

ABSTRACT Saprotrophic fungi that cause brown rot of woody biomass evolved a distinctive mechanism that relies on reactive oxygen species (ROS) to kick-start lignocellulosic polymers’ deconstruction. These ROS agents are generated at incipient decay stages through a series of redox relays that shuttle electrons from fungus’s central metabolism to extracellular Fenton chemistry. A list of genes has been suggested encoding the enzyme catalysts of the redox processes involved in ROS’s function. However, navigating the functions of the encoded enzymes has been challenging due to the lack of a rapid method for protein synthesis. Here, we employed cell-free expression system to synthesize four redox or degradative enzymes, which were identified, by transcriptomic data, as conserved players of the ROS oxidation phase across brown rot fungal species. All four enzymes were successfully expressed and showed activities that enable confident assignment of function, namely, benzoquinone reductase (BQR), ferric reductase, α-L-arabinofuranosidase (ABF), and heme-thiolate peroxidase (HTP). Detailed analysis of their catalytic features within the context of brown rot environments allowed us to interpret their roles during ROS-driven wood decomposition. Specifically, we validated the functions of BQR as the driver redox enzyme of Fenton cycles and reconstructed its interactions with the co-occurring HTP or laccase and ABF. Taken together, this research demonstrated that the cell-free expression platform is adequate for synthesizing functional fungal enzymes and provided an alternative route for the rapid characterization of fungal proteins, escalating our understanding of the distinctive biocatalyst system for plant biomass conversion. IMPORTANCE Brown rot fungi are efficient wood decomposers in nature, and their unique degradative systems harbor untapped catalysts pursued by the biorefinery and bioremediation industries. While the use of “omics” platforms has recently uncovered the key “oxidative-hydrolytic” mechanisms that allow these fungi to attack lignocellulose, individual protein characterization is lagging behind due to the lack of a robust method for rapid synthesis of crucial fungal enzymes. This work delves into the studies of biochemical functions of brown rot enzymes using a rapid, cell-free expression platform, which allowed the successful depictions of enzymes’ catalytic features, their interactions with Fenton chemistry, and their roles played during the incipient stage of brown rot when fungus sets off the reactive oxygen species for oxidative degradation. We expect this research could illuminate cell-free protein expression system’s use to fulfill the increasing need for functional studies of fungal enzymes, advancing the discoveries of novel biomass-converting catalysts.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Rhamnogalacturonan I is a recalcitrant pectin domain during Clostridium thermocellum -mediated deconstruction of switchgrass biomass

Background Liquid fuels from lignocellulosic feedstocks are required for transition to a sustainable bioeconomy. However, the recalcitrance of carbon-containing feedstock cell walls to deconstruction poses a barrier to cost effective biological conversion of plant biomass to biofuels. One-step consolidated bioprocessing (CBP) in which anaerobic thermophilic bacteria convert lignocellulosic biomass into liquid fuels is a platform for overcoming the recalcitrance of plant biomass. Results The amounts of hemicellulosic and pectic polysaccharides, two complex cell wall glycans that contribute to plant biomass recalcitrance and that are partially solubilized during CBP of switchgrass aerial biomass by Clostridium thermocellum were evaluated in the liquor, solid residues and residue washate recovered during a 120-h CBP process. After 120 h, 24% of milled switchgrass was solubilized in the C. thermocellum CBP platform. Higher concentrations of arabinose, xylose, galactose, and glucose accumulated in the CBP-fermentation liquor and washate compared to fermentation controls without C. thermocellum, indicating that C. thermocellum solubilized hemicelluloses, but did not fully metabolize them. After five days of fermentation, the relative amount of rhamnose in the solid residues increased by 16% compared to controls, and CBP solid residues had more than 23% increased reactivity against RG-I reactive monoclonal antibodies, indicating that the pectic polymer rhamnogalacturonan I (RG-I) was not effectively solubilized from switchgrass biomass by C. thermocellum CBP. Similarly, the amount of mannose (Man) in the CBP solid residues increased by 7% and reactivity against galactomannan reactive antibodies increased by greater than 14%, indicating that the hemicellulosic polymer galactomannan was also resistant to degradation by C. thermocellum during CBP fermentation. Conclusions These findings show that C. thermocellum is unable to effectively degrade RG-I pectic and galactomannan hemicellulosic components in switchgrass biomass. Targeting these polymers for improved solubilization could enhance the efficiency of conversion of grass biomass to biofuels.

09 BIOMASS FUELS↗
DOE OSTI2024

A miniaturized feedstocks-to-fuels pipeline for screening the efficiency of deconstruction and microbial conversion of lignocellulosic biomass

Sustainably grown biomass is a promising alternative to produce fuels and chemicals and reduce the dependency on fossil energy sources. However, the efficient conversion of lignocellulosic biomass into biofuels and bioproducts often requires extensive testing of components and reaction conditions used in the pretreatment, saccharification, and bioconversion steps. This restriction can result in a significant and unwieldy number of combinations of biomass types, solvents, microbial strains, and operational parameters that need to be characterized, turning these efforts into a daunting and time-consuming task. Here we developed a high-throughput feedstocks-to-fuels screening platform to address these challenges. The result is a miniaturized semi-automated platform that leverages the capabilities of a solid handling robot, a liquid handling robot, analytical instruments, and a centralized data repository, adapted to operate as an ionic-liquid-based biomass conversion pipeline. The pipeline was tested by using sorghum as feedstock, the biocompatible ionic liquid cholinium phosphate as pretreatment solvent, a “one-pot” process configuration that does not require ionic liquid removal after pretreatment, and an engineered strain of the yeast Rhodosporidium toruloides that produces the jet-fuel precursor bisabolene as a conversion microbe. By the simultaneous processing of 48 samples, we show that this configuration and reaction conditions result in sugar yields (~70%) and bisabolene titers (~1500 mg/L) that are comparable to the efficiencies observed at larger scales but require only a fraction of the time. We expect that this Feedstocks-to-Fuels pipeline will become an effective tool to screen thousands of bioenergy crop and feedstock samples and assist process optimization efforts and the development of predictive deconstruction approaches.

09 BIOMASS FUELS↗
DOE OSTI2023

Functional characterization and regulatory modeling of lignocellulose deconstruction in the saprophytic bacterium Cellvibrio japonicus (Final Technical Report)

The goal of this project was to establish a fundamental systems-level model of lignocellulose deconstruction by saprophytic soil bacteria while simultaneously identifying and characterizing novel enzymes that can be used for applied bioenergy technologies. This project was significant because it elevated our mechanistic and regulatory understanding of bacterial plant biomass degradation and led to technologies to enable bottlenecks in biofuel production R&D. Furthermore, the completed work was novel because it integrated in vivo, in vitro, and in silico approaches with bioenergy-relevant substrates. We identified the required enzymes for lignocellulose degradation and mechanisms of regulation through a combination of transcriptomic profiling (RNAseq), enzymatic analysis, the functional characterization of mutants, and modeling of the regulatory networks used to detect and degrade lignocellulose. This project employed the lignocellulose-degrading bacterium Cellvibrio japonicus to dissect the functional properties and underlying regulatory networks saprophytic bacteria use to depolymerize and utilize lignocellulose. There were four Objectives to this project, the specific metrics of which are summarized in this report.

09 BIOMASS FUELS↗
DOE OSTI2023

Liquefaction of different corn stover fractions assisted by enzyme-biomass deconstruction

Recalcitrant properties of different sources of lignocellulosic biomass represent challenges in materials processing within a biorefinery, as well as enzyme efficient deconstruction to fermentable sugars. Limitations include lignin derived enzyme inhibitors, enzyme inhibition by hydrolysis products, and resistance to mixing due to rheological properties of lignocellulosic particulates at high solids loadings. Consequently, we examined conditions that might be used to achieve liquid slurries (i.e., liquefaction) at solids loadings of 300 g/L before the material enters the biorefinery through a pretreatment step. This work explores enzyme-assisted liquefaction in a fed-batch process using the commercial enzymes Celluclast 1.5L or Ctec-2 at 1FPU/g or 3 FPU/g of dry solids, basis. Corn stover pellets were fed into a 1 L stirred bioreactor containing enzyme solution over a 5-hour period until reaching 30% solids loading (dry wgt / vol basis). After 6, 24 and 96 hours from the start of the run, samples were taken and characterized with respect to their sugar composition, rheology, water absorption and enzyme activity. Slurries with dramatically reduced yield stresses were achieved for corn stover. Yield stresses of 178±7 Pa (3 FPU, Celluclast 1.5L) and 79±6 Pa (3FPU, Ctec-2) were measured for corn stover at 24 hours, compared to 6,000 Pa for samples without enzyme.Yield stress was 155± 29 Pa (3FPU, Ctec-2) and 257 ± 72 Pa (1 FPU, Celluclast 1.5L) for corn cobs at 24 hours.A profile based on 6, 24 and 96h of yield stress measurements and sugar conversion is presented. Enzyme activity is measured and the impact of liquefaction on an integrated processing in a biorefinery operation is discussed.

Gutierrez, Diana↗
DOE OSTI2025

Enhanced Feedstock Characterization and Modeling to Facilitate Optimal Preprocessing and Deconstruction of Corn Stover (Final Report)

This project addresses the challenge of processing corn stover by fractionating this biomass feedstock to both streamline processing and generate new potential co-products. Additionally, the project developed new field-deployable analytical tools that can be coupled with empirical models that were used to predict feedstock properties and processing performance. The overall scope of this project was: (1) identify conditions for optimal corn stover fractionation using a two- stage physical fractionation, (2) assess how physical fractionation impacts properties, partitioning of biomass, and response to processing, (3) further adapt, develop, and validate several advanced characterization tools for assessing biomass properties that can be linked to processing behavior, and (4) develop and validate predictive models based on measurements that can be performed “in the field” or “at the biorefinery gate” to predict feedstock processing behavior (preprocessing and deconstruction). The first objective employed pre-separation processing (size reduction) which was next subjected to enhanced separations to yield fractions enriched or depleted in select compositional components or properties. For the second objective, fractions were screened for their response to post-separation processing (pretreatment and enzymatic hydrolysis). Detailed characterization profiles were developed and dynamic image analysis to assess distribution of particle size and morphology. For the final objective, we utilized these tools to develop empirical models to assess the relative abundance of tissue type in order to assess fractionation efficacy and to predict fraction performance during pretreatment and enzymatic hydrolysis.

09 BIOMASS FUELS↗
DOE OSTI2026

Deconstruction by C. thermocellum —from microbe mediated to dynamic redistribution of cellulosomes

Clostridium thermocellum is one of the most efficient microorganisms for the deconstruction of cellulosic biomass. To achieve this high level of cellulolytic activity, C. thermocellum uses large multienzyme complexes known as cellulosomes to break down complex polysaccharides, notably cellulose, found in plant cell walls. The attachment of bacterial cells to the nearby substrate via the cellulosome has been hypothesized to be the reason for this high efficiency. The region lying between the cell and the substrate has shown great variation and dynamics that are affected by the growth stage of cells and the substrate used for growth. Here, we used both super-resolution imaging and machine-learning approaches to study the distribution of C. thermocellum cellulosomes at different stages of growth. We show that C. thermocellum initially retains its cellulosomes primarily on the cell surface but then relocates large cellulosome clusters to the interface with biomass, therefore depleting its cell surface of cellulosomes. These results indicate dynamic redistribution of cellulosomes during growth, with a functional shift toward substrate-associated degradation later during growth on biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Replication Data for: Deconstructing Chirality: Probing Local and Non-local Effects in Azobenzene Derivatives with X-ray Circular Dichroism

Resolving molecular chirality at the atomic scale remains a critical challenge in chemistry. Conventional Optical Circular Dichroism spectroscopy often overlooks subtle and localized structural features. Here, we computationally investigate site-specific X-ray Circular Dichroism (XCD) across a series of trans-azobenzene derivatives to deconstruct and interpret chiroptical signals at the atomic level. Our modeling reveals that XCD is capable of distinguishing dichroic contributions arising from both a local chiral center and global molecular twist, revealing their intricate interplay and potential for constructive or destructive interference. We show that sterically-induced global distortions can dominate the XCD signal in some cases, even suppressing the response from the chiral center itself. This insight suggests a new molecular design principle for tuning chiroptical activity, which we extend by proposing strategies to achieve unidirectional photoisomerization through steric gearing. Altogether, this work establishes a quantitative framework for engineering chiroptical responses, laying the foundation for the design of functional chiral systems utilizing principles of unidirectional molecular motor-like conformational dynamics.

Chemistry↗
DOE OSTI2020

Deconstructing the Nuclear Supply Chain Cyber-Attack Surface

The nuclear supply chain cyber-attack surface is a large, complex network of interconnected stakeholders and activities. The global economy has widened and deepened the supply chain resulting in larger numbers of geographically dispersed locations and increased difficulty ensuring the authenticity and security of digital assets. Although the nuclear industry has made significant strides in securing facilities from cyber-attacks, the supply chain remains vulnerable. This paper provides further details on each of the elements in the Digital I&C System Supply Chain Cyber-Attack Surface, including supply chain lifecycle activities, key stakeholders, touchpoints, and attack types. Deconstructing this attack surface provides insights into supply chain threats, vulnerabilities, and consequences. These insights will lead to improvements in cybersecurity supply chain risk analysis, development of new cybersecurity supply chain processes and tools, and enhancement of overall supply chain resilience.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Deconstructing the High Voltage Degradation Mechanisms in Na 2/3 Ni 1/3 Mn 2/3 O 2 with Single Crystals and Advanced Electrolyte

Abstract Sodium layered oxide cathodes can uniquely benefit from the existing lithium‐ion battery industry as sodium‐ion batteries gain traction as a potential low‐cost, drop‐in replacement. However, achieving relevant energy density with a suitable cycle life remains a challenge for sodium layered oxides. At high operating potentials, several competing degradation mechanisms prevent P2‐type Na 2/3 Ni 1/3 Mn 2/3 O 2 (≈550 Wh kg −1 ) from achieving meaningful cycle life—with bulk structural instability and surface reactivity being the primary retractors. Herein, the issue of particle cracking is addressed through detailed synthesis methods of “single‐crystal” materials. By comparison to a polycrystalline baseline, the single‐crystal materials quantify the capacity loss due to isolation of active material caused by intergranular particle cracking. The single crystal materials are then employed in cells with an advanced, “localized saturated electrolyte” (LSE) to demonstrate the magnitude of capacity loss due to electrolyte decomposition at the cathode surface. Mitigation of the surface reactivity through the LSE electrolyte effectively demonstrates the elevated importance of surface reactivity at high voltages despite the onset of egregious particle cracking. This work aims to guide future research into understanding molten‐salt assisted syntheses and advance the debate on surface versus bulk degradation.

Darga, Joe↗
DOE OSTI2025

Deconstruction of the Anisotropic Magnetic Interactions from Spin‐Entangled Optical Excitations in van der Waals Antiferromagnets

Magneto-optical excitations in antiferromagnetic d systems can originate from a multiplicity of light-spin and spin-spin interactions, as the light and spin degrees of freedom can be entangled. This is exemplified in van der Waals systems with attendant strong anisotropy between in-plane and out-of-plane directions, such as MnPS 3 and NiPS 3 films studied here. The rich interplay between the magnetic ordering and sub-bandgap optical transitions poses a challenge to resolve the mechanisms driving spin-entangled optical transitions, as well as the single-particle bandgap itself. Here, a high-fidelity ab initio theory is applied to find a realistic estimation of the bandgap by elucidating the atom- and orbital-resolved contributions to the fundamental sub-bands. It is further demonstrated that the spin-entangled excitations, observable as photoluminescence and absorption resonances, originate from an on-site spin-flip transition confined to a magnetic atom (Mn or Ni). The evolution of the spin-flip transition in a magnetic field is used to deduce the effective exchange coupling and anisotropy constants.

2D materials↗
DOE OSTI2026

Reaction Optimization for Enzymatic Deconstruction of Industrially Relevant Nylon Composites

Plastics such as polyamides (PAs) possess unique physicochemical properties that make them indispensable in modern society. However, their energy‐intensive production and challenging end‐of‐life management highlight the urgent need for efficient recycling or remanufacturing solutions. Enzymatic depolymerization offers a promising route toward circular recycling, yet remains constrained by limited enzyme characterization, lack of validation under industrially relevant conditions and substrates, and overall performance. Here, we optimized the reaction conditions for three recently discovered nylon‐degrading enzymes. One of them, Nyl12, achieved product titers with PA6 and PA66 that exceed previously reported values, without enzyme engineering or substrate pretreatment. We further demonstrated the scalability of the process and its application to complex PA‐based materials used in microelectronic components. Analysis of substrate features, including surface area and particle size, revealed key parameters governing enzymatic activity and provided a framework for future pretreatment and process optimization efforts. In combination, these efforts provide a new benchmark for enzymatic nylon recycling.

nylon↗
DOE OSTI2026

The deconstruction of flavor in the privately democratic Higgs sector

The Standard Model (SM) of particle physics fails to explain the observed hierarchy in fermion masses or the origin of fermion-flavor structure. We construct a model to explain these observations in the quark sector. We introduce a spectrum of new particles consisting of six of each — massive singlet vector-like quarks (VLQs), singlet scalars, and SU(2)-doublet scalars. SM quark masses are generated when the neutral components of the SU(2)-doublet scalars acquire non-zero vacuum expectation values (VEVs). We impose global symmetries to ensure that Yukawa couplings stay roughly flavor diagonal and democratic (of the same order), as well as to suppress tree-level flavor-changing neutral currents. Quark-mass hierarchy then follows from a hierarchy in scalar VEVs. The singlet scalars also acquire weak-scale VEVs. Together with the VLQs, they act as messengers between different generations of quarks in the SM. These messenger particles are responsible for generating the elements of the Cabibbo-Kobayashi-Masakawa (CKM) matrix which depend on the ratios of the singlet VEVs and VLQ masses. Constructed this way, the CKM matrix is found to be independent of the SM fermion masses. Using the measured values of the CKM matrix elements and assuming order-one couplings, we derive constraints on the masses of the VLQs and discuss prospects for probing our model in the near future.

CKM Parameters↗
DOE OSTI2020

Deconstruction of plant biomass by a Cellulomonas strain isolated from an ultra-basic (lignin-stripping) spring

Plant material falling into the ultra-basic (pH 11.5-11.9) springs within The Cedars, an actively serpentinizing site in Sonoma County, California, is subject to conditions that mimic the industrial pretreatment of lignocellulosic biomass for biofuel production. In this research, we sought to obtain hemicellulolytic/cellulolytic bacteria from The Cedars springs that are capable of withstanding the extreme alkaline conditions wherein calcium hydroxide-rich water removes lignin, making cell wall polysaccharides more accessible to microorganisms and their enzymes. We enriched for such bacteria by adding plant debris from the springs into a synthetic alkaline medium with ground tissue of the biofuel crop switchgrass (Panicum virgatum L.) as the sole source of carbon. From the enrichment culture we isolated the facultative anaerobic bacterium Cellulomonas sp. strain FA1 (NBRC 114238), which tolerates high pH and catabolizes the major plant cell wall-associated polysaccharides cellulose, pectin, and hemicellulose. Strain FA1 in monoculture colonized the plant material and degraded switchgrass at a faster rate than the community from which it was derived. Cells of strain FA1 could be acclimated through subculturing to grow at a maximal concentration of 13.4% ethanol. A strain FA1-encoded β-1, 4-endoxylanase expressed in E. coli was active at a broad pH range, displaying near maximal activity at pH 6-9. Discovery of this bacterium illustrates the value of extreme alkaline springs in the search for microorganisms with potential for consolidated bioprocessing of plant biomass to biofuels and other valuable bio-inspired products.

59 BASIC BIOLOGICAL SCIENCES↗