Search NASA⌕ Search

SEARCH · Search NASA

Results for “dominant mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electron mobility of SnO 2 from first principles

The transparent conducting oxide SnO 2 is a wide bandgap semiconductor that is easily n-type doped and widely used in various electronic and optoelectronic applications. Experimental reports of the electron mobility of this material vary widely depending on the growth conditions and doping concentrations. In this work, we calculate the electron mobility of SnO 2 from first principles to examine the temperature and doping concentration dependence and to elucidate the scattering mechanisms that limit transport. We include both electron–phonon scattering and electron-ionized impurity scattering to accurately model scattering in a doped semiconductor. Furthermore, we find a strongly anisotropic mobility that favors transport in the direction parallel to the c-axis. At room temperature and intrinsic carrier concentrations, the low-energy polar-optical phonon modes dominate scattering, while ionized-impurity scattering dominates above 10 18 cm −3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exceptional stratospheric contribution to human fingerprints on atmospheric temperature

In 1967, scientists used a simple climate model to predict that human-caused increases in atmospheric CO 2 should warm Earth’s troposphere and cool the stratosphere. This important signature of anthropogenic climate change has been documented in weather balloon and satellite temperature measurements extending from near-surface to the lower stratosphere. Stratospheric cooling has also been confirmed in the mid to upper stratosphere, a layer extending from roughly 25 to 50 km above the Earth’s surface (S 25 − 50 ). To date, however, S 25 − 50 temperatures have not been used in pattern-based attribution studies of anthropogenic climate change. Here, we perform such a “fingerprint” study with satellite-derived patterns of temperature change that extend from the lower troposphere to the upper stratosphere. Including S 25 − 50 information increases signal-to-noise ratios by a factor of five, markedly enhancing fingerprint detectability. Key features of this global-scale human fingerprint include stratospheric cooling and tropospheric warming at all latitudes, with stratospheric cooling amplifying with height. In contrast, the dominant modes of internal variability in S 25 − 50 have smaller-scale temperature changes and lack uniform sign. These pronounced spatial differences between S 25 − 50 signal and noise patterns are accompanied by large cooling of S 25 − 50 (1 to 2 ° C over 1986 to 2022) and low S 25 − 50 noise levels. Our results explain why extending “vertical fingerprinting” to the mid to upper stratosphere yields incontrovertible evidence of human effects on the thermal structure of Earth’s atmosphere.

climate modeling↗
DOE OSTI2020

Supernova neutrino detection in NOvA

The NOvA long-baseline neutrino experiment uses a pair of large, segmented, liquid-scintillator calorimeters to study neutrino oscillations, using GeV-scale neutrinos from the Fermilab NuMI beam. These detectors are also sensitive to the flux of neutrinos which are emitted during a core-collapse supernova through inverse beta decay interactions on carbon at energies of &calO;(10 MeV). This signature provides a means to study the dominant mode of energy release for a core-collapse supernova occurring in our galaxy. We describe the data-driven software trigger system developed and employed by the NOvA experiment to identify and record neutrino data from nearby galactic supernovae. This technique has been used by NOvA to self-trigger on potential core-collapse supernovae in our galaxy, with an estimated sensitivity reaching out to 10 kpc distance while achieving a detection efficiency of 23% to 49% for supernovae from progenitor stars with masses of 9.6 M⊙ to 27 M⊙, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Self-consistent core-pedestal ITER scenario modeling

The purpose of these integrated ITER simulations is to identify dependencies that can impact the performance of ITER. The dependence of fusion power production, temperature and density pedestals, and core profiles on varying magnetic-q, edge density fueling strength, neoclassical transport, magnetic field strength, and alpha heating, are examined. It is noted that ion modes usually dominate the interior, while electron modes dominate the barrier. The electron mode without flow shear is substantially stronger. The q increase tends to cause more kinetic ballooning modes at the edge and the q decrease means that the peeling is getting worse, but the ballooning is getting better. The large edge q tends to provide hollow density while small edge q gives normal density profile. This is consistent with the observation that the density of particles is inversely proportional to the density of the plasma current. The rise in the source of the edge particle increases the density of the edge and the reaction rate close to the edge increases temperature fluxes, resulting in weak pedestal barriers. When neoclassical transport is turned off or the strength of B-field is increased, the pronounced edge barriers are identified. In addition, a distinct effect on the magnetohydrodynamic (MHD) modes is observed due to the increased B-field. The interesting aspect is that the barrier collapses about q = 2 as the stability of MHD has decreased to replace the barrier with a continuous slope but with roughly the same fusion power. This would actually be good for a reactor. The slope of the H-mode pedestal is found to be reduced due to the alpha heating. It is expected that the problem of edge-localized modes causing damage to the first wall will be eased. The effects of circular, elongated, and general geometry on plasma profiles are also compared and contrasted. The circular geometry has a hollow density profile and no edge or internal thermal transport barrier (ETB or ITB). However, both ETBs and ITBs can be found in the elongated geometry. In general geometry, there is a weaker ETB, comparable ITBs, but a higher edge particle transport barrier than in elongated geometry. Higher density near the edge, on the other hand, causes more wall erosion, so elongated geometry might be the best option.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Plasma self-driven current in tokamaks with magnetic islands

Magnetic island perturbations may cause a reduction in plasma self-driven current that is needed for tokamak operation. A novel effect on tokamak self-driven current revealed by global gyrokinetic simulations is due to magnetic-island-induced 3D electric potential structures, which have the same dominant mode numbers as that of the magnetic island, whereas centered at both the inner and outer edge of the island. The non-resonant potential islands are shown to drive a current through an efficient nonlinear parallel acceleration of electrons. In large aspect ratio (large-A) tokamak devices, this new effect can result in a significant global reduction of the electron bootstrap current when the island size is sufficiently large, in addition to the local current loss across the island region due to the pressure profile flattening. It is shown that there exists a critical magnetic island width for large-A tokamaks beyond which the electron bootstrap current loss is global and increases rapidly with the island size. As such, this process may introduce a size limit for tolerable magnetic islands in large-A tokamak devices in the context of steady state operation. On the other hand, the current loss caused by magnetic islands in low-A tokamaks such as spherical tokamak (ST) NSTX/U is minor. The reduction of the axisymmetric current by magnetic islands scales with the square of island width. However, the loss of the current is mainly local to the island region, and the pace of current loss as the island size increases is substantially slower compared to large-A tokamaks. In particular, the bootstrap current reduction in STs is even smaller in the reactor-relevant high-β p regime where neoclassical tearing modes are more likely to develop.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Entangled two-plasmon generation in carbon nanotubes and graphene-coated wires

Here, we investigate the two-plasmon spontaneous decay of a quantum emitter near single-walled carbon nanotubes (SWCNTs) and graphene-coated wires (GCWs). We demonstrate efficient, enhanced generation of two-plasmon entangled states in SWCNTs due to the strong coupling between tunable guided plasmons and the quantum emitter. We predict two-plasmon emission rates more than twelve orders of magnitude higher than in free space, with average lifetimes of a few dozen nanoseconds. Given their low dimensionality, these systems could be more efficient for generating and detecting entangled plasmons in comparison to extended graphene. Indeed, we achieve a tunable spectrum of emission in GCWs, where sharp resonances occur precisely at the plasmons' minimum excitation frequencies. We show that by changing the material properties of the GCW's dielectric core, one could tailor the dominant modes and frequencies of the emitted entangled plasmons while keeping the decay rate ten orders of magnitude higher than in free space. By unveiling the unique properties of two-plasmon spontaneous emission processes in the presence of low-dimensional carbon-based nanomaterials, our findings set the basis for a novel material platform with applications to on-chip quantum information technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Employing ternary fission of Pu 242 as a probe of very neutron-rich matter

Detailed assessments of the ability of recent theoretical approaches to modeling existing experimental data for ternary fission confirm earlier indications that the dominant mode of cluster formation in ternary fission is clusterization in very neutron rich, very low density, essentially chemically equilibrated, nucleonic matter. An extended study and comparison of these approaches applied to ternary fission yields in the thermal neutron induced reaction 241 Pu(n th ,f) has been undertaken to refine the characterization of the source matter. Here, the resonance gas approximation has been improved taking in-medium effects on the binding energies into account. A temperature of 1.29 MeV, density of 6.7 × 10 -5 nucleons/fm 3 and proton fraction Y p = 0.035 are found to provide a good representation of yields of the ternary emitted light particles and clusters. In particular, results for Z = 1 and 2 isotopes are presented. Isotopes with larger Z are discussed, and the roles of medium and continuum effects, even at very low density are illustrated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Monolithically Integrated $\varepsilon$-Ge/In x Ga 1-x As Quantum Well Laser Design: Experimental and Theoretical Investigation

Here, we have analyzed the electrical and optical phenomenon occurring in a $\varepsilon$-Ge/In x Ga 1-x -Ge/In x Ga 1-x As quantum well (QW) laser through self-consistent physical solvers calibrated using in-house experimental results. A separate confinement heterostructure QW design is proposed to enable lasing from tensile strained germanium ($\varepsilon$-Ge/In x Ga 1-x -Ge) in the range of 1.55 um to 4 um wavelengths as a function of QW thickness and indium (In) composition. Different recombination mechanisms were analyzed as a function of tensile strain in $\varepsilon$-Ge/In x Ga 1-x -Ge QW. Minority carrier lifetime and band alignment are key attributes of a QW laser, which were measured using microwave photoconductive decay and x-ray photoelectron spectroscopy (as a function of In composition), respectively. The transition point of Ge to a direct bandgap material is re-affirmed to be at $\varepsilon$-Ge/In x Ga 1-x = 1.6% (In ~24%) and the transition from type I to type II for $\varepsilon$-Ge/In x Ga 1-x -Ge/In x Ga 1-x As QW is found to be at In ~55%. Also, the transition to a TM mode dominant laser is identified at In ~15%. Using a tunable waveguide design to optimize confinement as a function of In composition, strain, wavelength, QW thickness, refractive index, and geometry, the $\varepsilon$-Ge/In x Ga 1-x -Ge QW laser design provided a net material gain of ~2000 cm -1 and a threshold current density of ~5 kA/cm 2 , which is an improvement over existing Ge based lasers. In conclusion, the impact of In composition and QW thickness on the band structure, polarized gain spectra, and various lasing metrics were analyzed to show $\varepsilon$-Ge/In x Ga 1-x -Ge/InGaAs QW lasers as promising for integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Discrete Empirical Interpolation Method Based Dynamic Load Model Reduction

Dynamic load models add significant complexity to bulk power system time-domain simulations. The complexity is due to the large number of ordinary differential equations (ODEs) introduced by the dynamic load components such as induction motors. It is challenging to derive reduced-order models (ROMs) for dynamic loads due to the nonlinear functions in their governing equations. This paper applies the discrete empirical interpolation method enhanced proper orthogonal decomposition (DEIM-POD) to approximate the full dynamic load model with the ROM that minimizes the projection error of the nonlinear functions in dynamic load ODEs onto their dominant modes. This approach only requires evaluation of nonlinear functions at selected observation points. The observation points selected by DEIM also provide information for screening critical load buses where dynamic load model parameters contribute the most to the accuracy of ROM across multiple contingencies. The proposed approach is validated on IEEE 9-bus, WECC 179-bus and 2384-bus Polish systems.

bulk power system↗
DOE OSTI2025

Deep Reinforcement Learning-Based Control of Energy Storage for Interarea Oscillation Damping

With the increasing electricity consumption and lack of transmission investment, today's power systems are operated much closer to their limits, raising concerns of inter-area oscillations that deteriorate the system stability. Here, this article presents a novel energy storage placement and control approach for enhanced damping of interarea oscillations. Combining the residual analysis and dominant mode analysis, we are able to identify the advantageous locations for placing energy storage that achieve improved damping performance. To overcome the challenges, such as fixed control parameters and insufficient damping, we propose to use a deep reinforcement learning-based approach for energy storage control. A state-of-the-art guided surrogate-gradient-based evolutionary strategy is used to train a learning agent in a robust, efficient, and reproducible manner. Parallel computing is also adopted to speed up the training process. The proposed strategy has been tested on both medium and large-scale systems. The proposed methods have demonstrated their effectiveness in mitigating various interarea oscillations within a timeframe of 20 s, thereby averting system collapse and enhancing power grid stability effectively.

25 ENERGY STORAGE↗
DOE OSTI2025

On the bulk compaction of brittle granular materials, Part II: Representing interparticle comminution by K COMP

An applied and empirical compaction fracture resistance parameter, K COMP , was developed to represent the compression-induced interparticle-comminution response of granular brittle materials (e.g., ceramic or glass particles). The development of K COMP is an outcome from Part I of this three-paper series. The K COMP represents a continuum response of compaction fracture resistance and was adapted from established Griffith linear elastic fracture mechanics theory. From that, the K COMP relates macroscopically applied compressive stress to a corresponding inverse-square-root representative particle size, where the latter is estimated from an entire particle size distribution or specific surface area measurement. In conclusion, the K COMP value was not constant over a wide range of stresses for all examined brittle granular materials, and this is indicative of a change in the dominant mode of permanent deformation at higher compaction stresses.

brittle↗
DOE OSTI2023

Adsorptive exchange of coccolith biominerals facilitates viral infection

Marine coccolithophores are globally distributed, unicellular phytoplankton that produce nanopatterned, calcite biominerals (coccoliths). These biominerals are synthesized internally, deposited into an extracellular coccosphere, and routinely released into the external medium, where they profoundly affect the global carbon cycle. The cellular costs and benefits of calcification remain unresolved. Here, we show observational and experimental evidence, supported by biophysical modeling, that free coccoliths are highly adsorptive biominerals that readily interact with cells to form chimeric coccospheres and with viruses to form “viroliths,” which facilitate infection. Adsorption to cells is mediated by organic matter associated with the coccolith base plate and varies with biomineral morphology. Biomineral hitchhiking increases host-virus encounters by nearly an order of magnitude and can be the dominant mode of infection under stormy conditions, fundamentally altering how we view biomineral-cell-virus interactions in the environment.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

G2Aero (Separable shape tensors for aerodynamic design) [SWR-22-44]

G2Aero is a flexible and practical tool for design and deformation of 2D airfoils and 3D blades using data-driven approaches. G2Aero utilizes the geometry of matrix manifolds—specifically the Grassmannian—to build a novel framework for representing physics-based separable deformations of shapes. G2Aero offers the flexibility to generate perturbations in a customizable way over any portion of the blade. The G2Aero framework utilizes data-driven methods based on a curated database of physically relevant airfoils. Specific tools include: - principal geodesic analysis over normal coordinate neighborhoods of matrix manifolds; - a variety of data-regularized deformations to nominal 2D airfoil shapes; - Riemannian interpolation connecting a sequence of airfoil cross-sections to build 3D blades from 2D data; - consistent perturbations over the span of interpolated 3D blades based on dominant modes from the data-driven analysis.

Doronina, Olga↗
DOE OSTI2021

Evaluating Climate Models with the CLIVAR 2020 ENSO Metrics Package

El Niño–Southern Oscillation (ENSO) is the dominant mode of interannual climate variability on the planet, with far-reaching global impacts. It is therefore key to evaluate ENSO simulations in state-of-the-art numerical models used to study past, present, and future climate. Recently, the Pacific Region Panel of the International Climate and Ocean: Variability, Predictability and Change (CLIVAR) Project, as a part of the World Climate Research Programme (WCRP), led a community-wide effort to evaluate the simulation of ENSO variability, teleconnections, and processes in climate models. The new CLIVAR 2020 ENSO metrics package enables model diagnosis, comparison, and evaluation to 1) highlight aspects that need improvement; 2) monitor progress across model generations; 3) help in selecting models that are well suited for particular analyses; 4) reveal links between various model biases, illuminating the impacts of those biases on ENSO and its sensitivity to climate change; and to 5) advance ENSO literacy. By interfacing with existing model evaluation tools, the ENSO metrics package enables rapid analysis of multipetabyte databases of simulations, such as those generated by the Coupled Model Intercomparison Project phases 5 (CMIP5) and 6 (CMIP6). The CMIP6 models are found to significantly outperform those from CMIP5 for 8 out of 24 ENSO-relevant metrics, with most CMIP6 models showing improved tropical Pacific seasonality and ENSO teleconnections. Only one ENSO metric is significantly degraded in CMIP6, namely, the coupling between the ocean surface and subsurface temperature anomalies, while the majority of metrics remain unchanged.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Collaborative Research: The Evolution of Magnetic Skeletons During 3D Reconnection. Final report

We investigated how the plasmoid instability affects the evolution of topological features of a magnetic field and the process of magnetic reconnection with three sub-projects. (i) We extensively studied the criterion for plasmoid-mediated current sheet disruption and the onset of fast reconnection. Scaling relations with respect to plasma parameters have been established, using both direct numerical simulations and analytic theories, for the disruption time, the current sheet width, the instability linear growth rate, and the dominant mode wavenumber. (ii) We applied the theories of plasmoid-mediated current sheet disruption to magnetohydrodynamic turbulence and predicted a steepening of the turbulence energy spectrum. This steepening has been confirmed by direct numerical simulations. (iii) We performed numerical simulations of ultraviolet burst events in the solar atmosphere with a spine-dome magnetic topology. The plasmoid instability leads to unsteady reconnection, which is consistent with solar observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Next-Generation Simulations of the Remarkable Deaths Of Massive Stars [Slides]

3D models of stellar convection are necessary for accurate description of state of model near collapse. Convection is occurring at many scales with the large dominant mode near collapse. 3D instabilities can affect flow properties and mass entrainment. Mach number profiles show favorable conditions for explosion. 3D rotating progenitor models are ALSO necessary. The redistribution of AM diverges from the MESA model, with implications for remnant. There is turbulent transport of AM in convective shell regions. Multi-D models can provide input for successful CCSN models. Larger non-radial kinetic energy exists when using multi-D progenitor input. The 3D CCSN model showed prompt convection and asymmetric shock runaway. Explosion properties suggest robust impact on multi-messenger signals.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Implementing General Framework in MFIX for Radiative Heat Transfer in Gas-Solid Reacting Flows (Final Report)

The current knowledge gap between radiation and multiphase flow communities is the greatest barrier to developing predictive models for radiation, the dominant mode of heat transfer in gas-solid reacting flows. The objectives of this research are (1) to develop and implement a general framework to support the integration of modern radiation models for gas-solid reacting flows; (2) to implement a methodology for developing new multiphase radiation models with accuracy and efficiency commensurate with their importance in energy-related applications, and (3) to demonstrate the accuracy and efficiency of the radiation models under typical gas-solid reacting flow conditions.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Quantifying Thermal Output of Energetic Materials (LDRD Final Report)

We present the results of an LDRD project, funded by the Nuclear Deterrence IA, to develop capabilities for quantitative assessment of pyrotechnic thermal output. The thermal battery igniter is used as an exemplar system. Experimental methodologies for thermal output evaluation are demonstrated here, which can help designers and engineers better specify pyrotechnic components , provide thermal output guidelines for new formulations, and generate new metrics for assessing component performance and margin given a known failure condition. A heat-transfer analysis confirms that the dominant mode of energy transfer from the pyrotechnic output plume to the heat pellet is conduction via deposition of hot titanium particles. A simple lumped-parameter model of titanium particle heat transfer and a detailed multi-phase model of deposition heat transfer are discussed. Pyrotechnic function, as defined by "go/no-go" standoff testing of a heat pellet, is correlated with experimentally measured igniter plume temperature, titanium metal particle temperature, and energy deposition. Three high-speed thermal diagnostics were developed for this task. A three-color imaging pyrometer, acquiring 100k images per second on three color channels, is deployed for measurement of titanium particle temperatures. Complimentary measurements of the overall igniter plume emission ("color") temperature were conducted using a transmission-grating spectrograph in line-imaging mode. Heat flux and energy deposition to a cold wall at the heat-pellet location were estimated using an eroding thermocouple probe, with a frequency response of ~5 kHz. Ultimate "go/no-go" function in the igniter/heat-pellet system was correlated with quantitative thermal metrics, in particular surface energy deposition and plume color temperature. Titanium metal-particle and plume color temperatures both experience an upper bound approximated by the 3245-K boiling point of TiO 2 . Average metal-particle temperatures remained nearly constant for all standoff distances at T = 2850 K, ± 300 K, while plume color temperature and heat flux decay with standoff—suggesting that heat-pellet failure results from a drop in metal-particle flux and not particle temperature. At 50% likelihood of heat-pellet failure, peak time-resolved plume color temperatures drop well below TiO 2 boiling to ~2000 - 2200 K, near the TiO 2 melting point. Estimates of peak heat flux decline from up to 1 GW/m 2 for near-field standoffs to below 320 MW/m 2 at 50% failure likelihood.

36 MATERIALS SCIENCE↗