Decoupled solution methods for multiphysics problems based on dynamic interface flux surrogates
Explore the source record for details and available documents.
Bochev, Pavel B. [Sandia National Laboratories (SN↗
SEARCH · Search NASA
Results for “dynamical decoupling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Climatology of Cloud‐Land‐Surface Coupling Across Different ARM Sites
Land-atmosphere interactions play a critical role in the evolution and formation of low-level clouds. The different states of coupling between low-level clouds and the surface are uncertain, primarily over continental regions, where complex thermodynamics complicates their investigation. This study uses observations from the Atmospheric Radiation Measurement User Facility to explore cloud-surface coupling and perform a climatological analysis of this interaction in five countries across three continents. The results reveal consistent coupling thresholds and average percentages across the five sites, with coupled clouds accounting for 66% of the cases and decoupled clouds for 34%. Thermodynamic and dynamic evaluations show distinct differences between coupled and decoupled clouds. Coupled clouds are characterized by humid environments, in which vertical motions connect the surface and lower atmosphere to the cloud base, conditions that favor the formation of boundary layer clouds. Decoupled clouds prefer to occur in a drier and colder environment with vertical motions inside the boundary layer being detached from the cloud base, under which boundary layer clouds are hard to form. Coupled clouds peak during warmer hours and seasons, and vice versa for decoupled clouds. This study underscores the complexity of cloud-land-surface interactions and paves the way for further investigations into cloud formation and evolution under different atmospheric environments.
54 ENVIRONMENTAL SCIENCES↗
Predator mass mortality events restructure food webs through trophic decoupling
Predators have a key role in structuring ecosystems. However, predator loss is accelerating globally, and predator mass-mortality events (MMEs)—rapid large-scale die-offs—are now emblematic of the Anthropocene epoch. Owing to their rare and unpredictable nature, we lack an understanding of how MMEs immediately impact ecosystems. Past predator-removal studies may be insufficient to understand the ecological consequences of MMEs because, in nature, dead predators decompose in situ and generate a resource pulse, which could alter ensuing ecosystem dynamics by temporarily enhancing productivity. Here we experimentally induce MMEs in tritrophic, freshwater lake food webs and report ecological dynamics that are distinct from predator losses or resource pulses alone, but that can be predicted from theory. MMEs led to the proliferation of diverse consumer and producer communities resulting from weakened top-down predator control and stronger bottom-up effects through predator decomposition. In contrast to predator removals alone, enhanced primary production after MMEs dampened the consumer community response. As a consequence, MMEs generated biomass dynamics that were most similar to those of undisturbed systems, indicating that they may be cryptic disturbances in nature. These biomass dynamics led to trophic decoupling, whereby the indirect beneficial effects of predators on primary producers are lost and later materialize as direct bottom-up effects that stimulate primary production amid intensified herbivory. Furthermore, these results reveal ecological signatures of MMEs and demonstrate the feasibility of forecasting novel ecological dynamics arising with intensifying global change.
Food webs↗
Molecular dynamics based study on the effects of cation size on the local structure and diffusion in polymerized ionic liquids
We have used coarse-grained molecular dynamics simulations to understand the effect of cation size on ion diffusion in polymerized ionic liquids at temperatures well above the glass transition temperature of the polymers. We investigated dependencies of the diffusion constant on the cation radius and static dielectric constant and interpreted these results in terms of underlying structural changes, and decoupling phenomenon. We have found non-monotonic effects of the cation radius on the diffusion constant, with a maximum at an intermediate radius resulting from two different size dependent effects. Changes in the radial distribution functions characterizing spatial distribution of cations with respect to anions result in a monotonic increase in the coordination number. This yields an increase in the effective interaction energy as a function of cation radius, which can explain the decrease in the diffusion constant. This increase is counteracted at small cation radii by a corresponding increase in decoupling of cation and anion dynamics. In addition, the diffusion constant is found to increase on increasing the static dielectric constant for all radii of the cations. These results highlight the significant role of decoupling in designing polymerized ionic liquids with an enhanced diffusion constant of cations.
Gillespie, Colin [ORNL] (ORCID:0000000320287080)↗
Developing a Reduced 240-Bus WECC Dynamic Model for Frequency Response Study of High Renewable Integration
The ongoing changes in the generation resource mix, driven by the rapid adoption of inverter-based resources (IBR) as well as the early retirement of synchronous generators, are bringing new challenges to the planning and operation of bulk electric power systems. Consequently, there is an increasing need to understand, design, and quantify the reliability service provision from IBRs by performing integrated scheduling and dynamic simulations. However, test systems that have consistent scheduling and dynamic models rarely exist largely because of the decoupled nature of the two simulations on a synchronous generator-dominated system. This paper develops the dynamic model of a reduced Western Electricity Coordinating Council (WECC) system. In conjunction with the existing scheduling model, it is suitable for integrating scheduling and dynamic simulations. The reduced 240-bus WECC model reflects the generation resource mix of the Western Interconnection as of 2018. Moreover, the developed dynamic model is validated against field frequency events measured by FNET/GridEye and preserves the dominant inter-area oscillation mode in WECC.
dynamic simulation↗
An effective description of charge diffusion and energy transport in a charged plasma from holography
We discuss the physics of sound propagation and charge diffusion in a plasma with non-vanishing charge density. Our analysis culminates the program initiated in to construct an open effective field theory of low-lying modes of the stress tensor and charge current in such plasmas. We model the plasma holographically as a Reissner-Nordström-AdS d+1 black hole, and study linearized fluctuations of longitudinally polarized scalar gravitons and photons in this background. We demonstrate that the perturbations can be decoupled and repackaged into the dynamics of two designer scalars, whose gravitational coupling is modulated by a non-trivial dilatonic factor. The holographic analysis allows us to isolate the phonon mode from the charge diffusion mode, and identify the combination of currents that corresponds to each of them. We use these results to obtain the real-time Gaussian effective action, which includes both the retarded response and the associated stochastic (Hawking) fluctuations, accurate to quartic order in gradients.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Theory of Ion-Mediated Segmental Localization, Activated Structural Relaxation, and the Glass Transition in Polymerized Ionic Liquids
Here we combine polymer integral equation theory for structural correlations with a force-level theory for activated segmental relaxation to construct a microscopic theory for how ions modify the onset of segmental localization, the polymer alpha relaxation time, and glass transition temperature, T g , in dry polymerized ionic liquids (PolyILs). Our most important findings concerning the behavior of T g are (i) a weak dependence on anion–cation Coulomb attraction strength due to strong decoupling of ion and segmental dynamics, (ii) strong reduction with increasing mobile ion size due to both plasticization effects and weakening of ion-modified monomer caging, and (iii) increase with backbone rigidity and intrachain dynamic cooperativity. We quantitatively estimate T g variations as ion size and polymer static and dynamic rigidity are widely varied. The experimental data of 19 PolyILs are organized into a specific pattern consistent with the theoretical predictions with glass transition temperatures varying over a very wide range (~250 K) as observed experimentally. Based on the theoretical results, suggestions are made concerning the search for high conductivity Li- or Na-based PolyILs based on further lowering of T g via new polymer synthesis. Calculations of the alpha time as a function of packing fraction reveal the dynamic fragility increases for larger mobile ions, a more flexible backbone, and/or a smaller degree of intrachain dynamic cooperativity, as a consequence of the increasing importance of collective elasticity in determining the activation barrier. An analysis of transient segmental localization and a crossover to activated dynamics reveals similar, but not identical, trends as predicted at the laboratory vitrification timescale.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Standalone Block Copolymer Nanoballoons: Decoupling Self-Assembly from Implementation in Nanomanufacturing
Here we report a facile method to produce isolatable hollow-core elastomeric vesicles, “nanoballoons”, prepared via block copolymer self-assembly in a polymer blend. Poly(isoprene-block-dimethylsiloxane) (PI-PDMS) diblock copolymers are blended with PDMS homopolymers (h-PDMS) as a “solvent” phase to template the self-assembly of PDMS-tethered vesicles with PI walls. The walls are subsequently crosslinked to yield mechanically stabilized elastomeric vesicles. The h-PDMS inner-core and matrix are separated from the vesicles by dialysis to yield the matrix-free nanoballoons. These objects, 0.3 – 1 μm in diameter, can be further reincorporated into a crosslinkable PDMS. Throughout the self-assembly, recovery, and reincorporation processes we apply several techniques including solvent dispersion/dynamic light scattering (DLS) measurements, transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy (EDS), and small-angle X-ray scattering (SAXS) to provide a consilient body of evidence that the nanoballoon morphology is retained. Furthermore, this work presents advanced nanomanufacturing schema that illustrate the decoupling of the thermodynamic and dynamic factors that govern macromolecular self-assembly from the environment in which the self-assembled objects are deployed.
36 MATERIALS SCIENCE↗
Phyllosphere exudates select for distinct microbiome members in sorghum epicuticular wax and aerial root mucilage
Phyllosphere exudates create specialized microhabitats that shape microbial community diversity. We explored the microbiome associated with two sorghum phyllosphere exudates, the epicuticular wax and aerial root mucilage. We assessed the microbiome associated with the wax from sorghum plants over two growth stages, and the root mucilage additionally from nitrogen-fertilized and non-fertilized plants. In parallel, we isolated and characterized hundreds of bacteria from wax and mucilage, and integrated data from cultivation-independent and cultivation-dependent approaches to gain insights into exudate diversity and bacterial phenotypes. We found that Sphingomonadaceae and Rhizobiaceae families were the major taxa in the wax regardless of water availability and plant developmental stage to plants. The cultivation-independent mucilage-associated bacterial microbiome contained Erwiniaceae, Flavobacteriaceae, Rhizobiaceae, Pseudomonadaceae, Sphingomonadaceae, and its structure was strongly influenced by sorghum development but only modestly influenced by fertilization. In contrast, the fungal community structure of mucilage was strongly affected by the year of sampling but not by fertilization or plant developmental stage, suggesting a decoupling of fungal-bacterial dynamics in the mucilage. Our bacterial isolate collection from wax and mucilage had several isolates that matched 100% to detected amplicon sequence variants, and were enriched on media that selected for phenotypes including phosphate solubilization, putative diazotrophy, resistance to desiccation, capability to grow on methanol as a carbon source, and ability to grow in the presence of linalool and β-caryophyllene (terpenes in sorghum wax). This work expands our understanding of the microbiome of phyllosphere exudates and supports our long-term goal to translate microbiome research to support sorghum cultivation.
59 BASIC BIOLOGICAL SCIENCES↗
Flexible Fully-Decoupled Nuclear Plants with Thermal Energy Storage - Technoeconomic Optimization
New nuclear power plants may be one of the technologies for future zero carbon electricity production. These future systems will however also need significant flexibility to cope with fluctuating demand and large share of intermittent renewable supply, rather than running in conventional baseload generation. The present work explores the use of thermal energy storage (TES) as a buffer between the reactor heat and its conversion to electricity, enabling flexible operation of nuclear plants. The focus is on maximizing flexibility, ideally as full decoupling of the nuclear and power cycle islands, as well as on system efficiency in various modes. A system design presented for a high temperature gas cooled reactor (HTGR) presents a slightly complex solution, as separate high- and low-temperature TES systems are required in order to cover the extended temperature range. Although this configuration imposes certain limitations on the discharge system configuration, it also presents the opportunity to design a more efficient system. For this case in particular, a steam reheat cycle is advantageous. Dynamic models were developed for the decoupled system in order to generate insights into aspects of off design operation and system control. A technoeconomic analysis, furthermore, provides sizing and costing of the component, followed by size and dispatch economic optimization considering energy arbitrage. This optimization shows that in all explored markets, the addition of TES system with the proposed configuration results in positive impact on project net present value. Further sensitivity analyses show impact of multiple inputs and possible technical limitations.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Rotated-Droop Control for Enhanced Stability and Power Decoupling in Microgrids With Complex Line Impedances
Classical droop control in microgrids predominantly assumes inductive line impedance, which simplifies implementation but causes power coupling and steady-state errors in systems with resistive and inductive lines. This paper proposes a rotated-droop control strategy for grid-forming inverters that reformulates the power equations by incorporating the magnitude and angle of the line impedance within a rotated reference frame. This method enhances the decoupling of active and reactive power dynamics without increasing complexity or requiring communication links. A small-signal state-space model was created to capture the dynamic behavior of the system under varying impedance parameters, preserving the original droop gains by rotating the power control structure. This allows eigenvalue-based stability analysis and enhances damping and transient performance. Simulation and experimental results validated the improved power-sharing performance, faster response, and robustness of the proposed method under different impedance conditions. This approach maintains the decentralized structure of the conventional droop control while enabling greater adaptability and scalability, making it suitable for modern inverter-based microgrids with dynamic topologies.
Campo-Ossa, Daniel Dario [Univ. of Puerto Rico, Ag↗
Temporal entanglement transitions in the periodically driven Ising chain
Periodically driven quantum systems can host non-equilibrium phenomena without static analogs, including in their entanglement dynamics. Here, we discover (TET) in a Floquet spin chain, which correspond to a quantum phase transition in the spectrum of the entanglement Hamiltonian and are signaled by dynamical spontaneous symmetry breaking. We identify the symmetry principles underlying these transitions: they appear when the driven Hamiltonian preserves global symmetry (here, ℤ2), the initial state respects this symmetry, and the reduced density matrix carries weight in both subsystem-parity sectors, with TET occurring precisely when the sector weights become equal (given the previous two conditions are also satisfied). Intriguingly, we find these transitions across a broad range of driving frequencies (from adiabatic to high-frequency regime) and independently of drive details, where they manifest as periodic, sharp entanglement spectrum reorganizations marked by the Schmidt-gap closure, a vanishing entanglement echo, and symmetry-quantum-number flips, while remaining invisible to conventional local observables. At high frequencies, the entanglement Hamiltonian acquires an intrinsic timescale decoupled from the drive period, rendering the transitions genuine steady-state features. Finite-size scaling reveals universal critical behavior with correlation-length exponent 𝜈 = 1, matching equilibrium Ising universality despite its emergence from purely dynamical mechanisms decoupled from static criticality. Furthermore, our work establishes TET as novel features in Floquet quantum matter.
36 MATERIALS SCIENCE↗
Conservative Spin-Magnitude Change in Orbital Evolution in General Relativity
We show that physical scattering observables for compact spinning objects in general relativity can depend on additional degrees of freedom in the spin tensor beyond those described by the spin vector alone. The impulse, spin kick, and leading-order waveforms exhibit such a nontrivial dependence. A signal of this additional structure is the change in the magnitude of the spin vector under conservative Hamiltonian evolution, similar to our previous studies in electrodynamics. These additional degrees of freedom describe dynamical mass multipoles of compact objects and decouple for black holes. We also show that the conservative impulse, spin kick, and change of the additional degrees of freedom are encoded in the eikonal phase.
Classical black holes↗
Enabling Scalable and Extensible Memory-mapped Datastores in Userspace
Exascale workloads are expected to incorporate data-intensive processing in close coordination with traditional physics simulations. These emerging scientific, data-analytics and machine learning applications need to access a wide variety of datastores in flat files and structured databases. Programmer productivity is greatly enhanced by mapping datastores into the application process's virtual memory space to provide a unified “in-memory” interface. Currently, memory mapping is provided by system software primarily designed for generality and reliability. However, scalability at high concurrency is a formidable challenge on exascale systems. Also, there is a need for extensibility to support new datastores potentially requiring HPC data transfer services. In this article, we present UMap , a scalable and extensible userspace service for memory-mapping datastores. Furthermore, through decoupled queue management, concurrency aware adaptation, and dynamic load balancing, UMap enables application performance to scale even at high concurrency. We evaluate UMap in data-intensive applications, including sorting, graph traversal, database operations, and metagenomic analytics. Our results show that UMap as a userspace service outperforms an optimized kernel-based service across a wide range of intra-node concurrency by 1.22-1.9 × . We performed two case studies to demonstrate UMap 's extensibility. First, a new datastore residing in remote memory is incorporated into UMap as an application-specific plugin. Second, we present a persistent memory allocator Metall built atop UMap for unified storage/memory.
97 MATHEMATICS AND COMPUTING↗
How do axisymmetric black holes grow monopole and dipole hair?
Here, we study the dynamical formation of scalar monopole and dipole hair in scalar Gauss-Bonnet theory and dynamical Chern-Simons theory. We prove that the spherically symmetric mode of the dipole hair is completely determined by the product of the mass of the spacetime and the value of the monopole hair. We then show that the dynamics of the ℓ = 1 mode of the dipole hair is intimately tied to the appearance of the event horizon during axisymmetric collapse, which results in the radiation of certain modes that could have been divergent in the future of the collapse. We confirm these analytical predictions by simulating the gravitational collapse of a rapidly rotating neutron star in the decoupling limit, both in scalar Gauss-Bonnet and dynamical Chern-Simons theory. Our results, combined with those provide a clear physical picture of the dynamics of scalar monopole and dipole radiation in axisymmetric and spherical gravitational collapse in these theories.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Flexible Reinforcement Learning Framework for Building Control using EnergyPlus-Modelica Energy Models
In recent years, reinforcement learning (RL) methods have been greatly enhanced by leveraging deep learning approaches. RL methods applied to building control have shown potential in many applications due to their ability to complement or replace conventional methods such as model-based or rule-based controls. However, RL-based building control software is likely tailored either to one target building system or to a specific RL method so that significant additional effort would be required to customize the RL-based controller for use in other building systems or with other RL approaches. Also, RL-based building controls usually depend on building energy simulations to train controllers, so emulating building dynamics (i.e., thermal dynamics and control dynamics) and capturing sub-hourly dynamic profiles are crucial to further the development of effective RL-based building control methods. To address these challenges, we present an open source RL-based control software employing a high-fidelity hybrid EnergyPlus-Modelica building energy model which emulates building dynamics at 1-minute resolution. This software consists of decoupled components (environment, building emulator, control agent, and RL algorithm), which allows for quick prototyping and benchmarking of standard RL algorithms in different systems; for example, a single component can be replaced without revising all of the software. To demonstrate this software framework, we conducted a benchmark study using an EnergyPlus-Modelica building energy model for a Chicago office building with an RL-based controller to dynamically control the chilled water temperature setpoint and the air handling unit supply air temperature setpoint on selected floors.
Lee, Joon-Yong↗
Nonlinear Architectures Can Alter the Dynamics of Polymer–Nanoparticle Composites
Polymer nanocomposites exhibit remarkable physical properties that are attractive for many applications. These systems have been so far investigated by using linear polymer chains; the role of polymer matrix architecture on local dynamics, bulk rheology and nanoparticle motion remains unexplored. Here, using quasielastic neutron scattering, bulk rheology and x-ray photon correlation spectroscopy, we investigated nanocomposites with spherical silica nanoparticles well dispersed in poly (ethylene oxide) matrices having different architectures (specifically linear, stars and hyperbranched). The results reveal that the mechanical reinforcement of the nanocomposites with the nonlinear polymers can be altered by orders of magnitude with respect to the conventional nanocomposite with the linear polymer. Additionally, the polymer compactness and inter-penetrability are found to play crucial roles in determining their bulk rheology. At microscopic level, average segmental dynamics is remarkably slowed down by the attractive NPs in the matrices of high degree of branching whereas no significant effect is observed in linear polymer matrix at the same NP loading. In addition, the nanoscale dynamics of particles in the compact nonlinear matrices exhibit strong decoupling from the bulk viscoelasticity, allowing their fast relaxation even at ≈ 30% by volume. These results provide an experimental evidence that macromolecular architecture is a powerful new tool for tuning the bulk rheological properties as well as the nanoscale dynamics of PNCs without the need for changing polymer molecular weight, nanoparticle size, shape, loading or dispersion state.
36 MATERIALS SCIENCE↗