Search NASA⌕ Search

SEARCH · Search NASA

Results for “explosive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The Use of Explosive Forming for Fastening and Joining Structural and Pressure Components

Explosive expansion of tubes into tubesheets has been used for over 20 years in the fabrication and repair of shell and tube heat exchangers. The use of explosives to perform these expansions has offered several distinct advantages over other methods. First, the process is fast and economical and can be performed with minimal training of personnel. Secondly, explosive forming does not cause the deleterious metallurgical effects which often result from other forming operations. In addition, the process can be performed remotely without the need for sophisticated handling equipment. The expansion of tubes into tubesheets is only one of many possible fastening and joining applications for which explosive forming can be used to achieve highly successful results. The explosive forming process and where it has been used are described. In addition, some possible adaptations to other joining applications are identified and discussed.

Schroeder, J. W.↗
NASA NTRS1985

Approach for service life extension of explosive devices for aircraft escape systems

Service life extension of explosive devices used in aircraft escape systems can achieve considerable savings. An overall approach is needed to challenge the logic of explosive component service extension from design to removal from service for evaluation. The purpose of the effort described in this paper was to develop a service-extension approach on explosive devices used in aircraft systems, supported by actual testing of representative candidate devices, to evaluate quantitatively the effects of service, age, and degradation, and allow responsible, conservative service life determinations. Evaluated were five explosive components: rigid and flexible explosive transfer lines, one-way transfers, flexible linear shaped charges, and initiation handles. The service extension approach generated in this effort is summarized by eight recommendations.

Bement, L. J.↗
NASA NTRS1992

Study of explosive and nonexplosive cyclogenesis during FGGE

Explosive cyclogenesis during the winter of the First Global GARP Experiment (January-February 1979) is analyzed using the revised European Centre for Medium Range Weather Forecasts (ECMWF) analyses. Explosive cyclogenesis is defined as a decrease in the sea level pressure at the rate of 1 mb/h for at least 12 h. Diagnostics for 23 explosively developing cases and 16 nonexplosive cases are evaluated. Parameters compared include the dry static stability, low-level relative vorticity, vorticity advection, upper-level divergence, and kinematic vertical velocities. These parameters are compared statistically at the initial, 12-, and 24-h time periods. Parameters for which the explosive and nonexplosive cyclone ensembles were statistically separable are the kinematic vertical velocity and the upper-level divergence and vorticity advection. The strong upper-level processes for the explosive cases at the initial time indicate the importance of upper-tropospheric features in producing the stronger vertical motions and more rapid cyclogenesis.

Wash, Carlyle H.↗
NASA NTRS1993

Explosive Boiling at Very Low Heat Fluxes: A Microgravity Phenomenon

The paper presents experimental observations of explosive boiling from a large (relative to bubble sizes) flat heating surface at very low heat fluxes in microgravity. The explosive boiling is characterized as either a rapid growth of vapor mass over the entire heating surface due to the flashing of superheated liquid or a violent boiling spread following the appearance of single bubbles on the heating surface. Pool boiling data with saturated Freon 113 was obtained in the microgravity environment of the space shuttle. The unique features of the experimental results are the sustainability of high liquid superheat for long periods and the occurrence of explosive boiling at low heat fluxes (0.2 to 1.2 kW/sq m). For a heat flux of 1.0 kW/sq m a wall superheat of 17.9 degrees C was attained in ten minutes of heating. This was followed by an explosive boiling accompanied with a pressure spike and a violent bulk liquid motion. However, at this heat flux the vapor blanketing the heating surface could not be sustained. Stable nucleate boiling continued following the explosive boiling.

Hasan, M. M.↗
NASA NTRS1998

Trace Explosives Signatures from World War II Unexploded Undersea Ordnance

Trace explosives signatures of TNT and DNT have been extracted from multiple sediment samples adjacent to unexploded undersea ordnance at Halifax Harbor, Canada. The ordnance was hurled into the harbor during a massive explosion some 50 years earlier, in 1945 after World War II had ended. Laboratory sediment extractions were made using the solid-phase microextraction (SPME) method in seawater and detection using the Reversal Electron Attachment Detection (READ) technique and, in the case of DNT, a commercial gas chromatograph/mass spectrometer (GC/MS). Results show that, after more than 50 years in the environment, ordnance that appeared to be physically intact gave good explosives signatures at the parts per billion level, whereas ordnance that had been cracked open during the explosion gave no signatures at the 10 parts per trillion sensitivity level. These measurements appear to provide the first reported data of explosives signatures from undersea unexploded ordnance.

Darrach, M. R.↗
NASA NTRS2000

Explosive Fracturing of an F-16 Canopy for Through-Canopy Crew Egress

Through-canopy crew egress, such as in the Harrier (AV-8B) aircraft, expands escape envelopes by reducing seat ejection delays in waiting for canopy jettison. Adverse aircraft attitude and reduced forward flight speed can further increase the times for canopy jettison. However, the advent of heavy, high-strength polycarbonate canopies for bird-strike resistance has not only increased jettison times, but has made seat penetration impossible. The goal of the effort described in this paper was to demonstrate a method of explosively fracturing the F-16 polycarbonate canopy to allow through-canopy crew ejection. The objectives of this effort were to: 1. Mount the explosive materials on the exterior of the canopy within the mold line, 2. Minimize visual obstructions, 3. Minimize internal debris on explosive activation, 4. Operate within less than 10 ms, 5. Maintain the shape of the canopy after functioning to prevent major pieces from entering the cockpit, and 6. Minimize the resistance of the canopy to seat penetration. All goals and objectives were met in a full-scale test demonstration. In addition to expanding crew escape envelopes, this canopy fracture approach offers the potential for reducing system complexity, weight and cost, while increasing overall reliability, compared to current canopy jettison approaches. To comply with International Traffic in Arms Regulations (ITAR) and permit public disclosure, this document addresses only the principles of explosive fracturing of the F-16 canopy materials and the end result. ITAR regulations restrict information on improving the performance of weapon systems. Therefore, details on the explosive loads and final assembly of this canopy fracture approach, necessary to assure functional performance, are not included.

Bement, Laurence J.↗
NASA NTRS2000

Supplier's Status for Critical Solid Propellants, Explosive, and Pyrotechnic Ingredients

In the early 1970's a program was initiated at the Naval Surface Warfare Center/Indian Head Division (NSWC/IHDIV) to address the well-known problems associated with availability and suppliers of critical ingredients. These critical ingredients are necessary for preparation of solid propellants and explosives manufactured by the Navy. The objective of the program was to identify primary and secondary (or back-up) vendor information for these critical ingredients, and to develop suitable alternative materials if an ingredient is unavailable. In 1992 NSWC/IHDIV funded Chemical Propulsion Information Agency (CPIA) under a Technical Area Task (TAT) to expedite the task of creating a database listing critical ingredients used to manufacture Navy propellant and explosives based on known formulation quantities. Under this task CPIA provided employees that were 100 percent dedicated to the task of obtaining critical ingredient suppliers information, selecting the software and designing the interface between the computer program and the database users. TAT objectives included creating the Explosive Ingredients Source Database (EISD) for Propellant, Explosive and Pyrotechnic (PEP) critical elements. The goal was to create a readily accessible database, to provide users a quick-view summary of critical ingredient supplier's information and create a centralized archive that CPIA would update and distribute. EISD funding ended in 1996. At that time, the database entries included 53 formulations and 108 critical used to manufacture Navy propellant and explosives. CPIA turned the database tasking back over to NSWC/IHDIV to maintain and distribute at their discretion. Due to significant interest in propellant/explosives critical ingredients suppliers' status, the Propellant Development and Characterization Subcommittee (PDCS) approached the JANNAF Executive committee (EC) for authorization to continue the critical ingredient database work. In 1999, JANNAF EC approved the PDCS panel task. This paper is designed to emphasize the necessity of maintaining a JANNAF community supported database, which monitors PEP critical ingredient suppliers' status. The final product of this task is a user friendly, searchable database that provides a quick-view summary of critical ingredient supplier's information. This database must be designed to serve the needs of JANNAF and the propellant and energetic commercial manufacturing community as well. This paper provides a summary of the type of information to archive each critical ingredient.

Sims, B. L.↗
NASA NTRS2004

Solar Magnetic Explosions, Spicules, and the Heliosphere

We present an example of each of the following observed characteristics of the magnetic origins of quiet-region coronal heating, spicules, macrospicules, and coronal mass ejections (CMEs). (1) In quiet regions, the luminosity of the corona is roughly proportional to the edge length of the underlying photospheric magnetic network. (2) Spicules and EUV explosive events are concentrated at the edges of the magnetic network. (3) Many macrospicules have the magnetic structure of a surge rooted around an inclusion of opposite-polarity magnetic flux. (4) CMEs and eruptive flares are driven by explosions of sheared magnetic fields rooted along polarity dividing lines (neutral lines) in the photospheric magnetic flux. These characteristics together suggest that the mainstay of the heliosphere, the corona/solar wind rooted in quiet regions and coronal holes, may be driven by myriads of tiny magnetic explosions at the network edges, explosions like those that drive CMEs but of vastly smaller scale. If so, the steady solar wind and the CMEs that disrupt it both have the same root cause: explosions of initially-closed, strongly-sheared, bipolar magnetic fields. The photospheric vector magnetograms, chromospheric filtergrams, EUV spectra, and coronal images from Solar-B are expected to have sufficient sensitivity, spatial resolution, and cadence to test this scenario for coronal heating in quiet regions and coronal holes. This work was supported by NASA/OSS through its Solar and Heliospheric Physics SR and T Program and Sun-Earth Connection GI Program.

Moore, Ronald L.↗
NASA NTRS2008

The Young Massive Stellar Cluster Sandage-96 after the Explosion of SN 2004DJ in NGC 2403

The bright supernova 2004dj occurred within the young massive stellar cluster Sandage-96 in a spiral arm of NGC 2403, close to other star-forming complexes. New multi-wavelength observations obtained with several ground-based- and space telescopes are combined to study the radiation from Sandage-96 after SN 2004dj faded away. The late-time light curves show that Sandage-96 started to dominate the flux in the optical bands after September, 2006 (+800 days after explosion). The optical fluxes are equal to the pre-explosion ones, suggesting that Sandage-96 has survived the explosion without significant changes in its stellar population. An optical Keck-spectrum obtained at +900 days after explosion shows the dominant blue continuum from the cluster stars shortward of 6000 A as well as strong SN nebular emission lines redward. The integrated SED of the cluster has been extended into the UV-region by archival XMM-Newton and new Swift observations, and compared with theoretical models. The outer parts of the cluster have been resolved by HST allowing the construction of a color-magnitude diagram. The fitting of the cluster SED with theoretical isochrones results in two possible solutions with ages being 9+/-1 Myr and 30+/-10 Myr, depending on the assumed metallicity and the theoretical model family. The isochrone fitting of the color-magnitude diagram indicates that the outer part of the cluster consists of stars having an age dispersion of 16 < t < 63 Myr, which is similar to that of nearby field stars. This age discrepancy may be resolved by the hypothesis that the outskirt of Sandage-96 is contaminated by stars captured from the field during cluster formation. The young age of Sandage-96 and the comparison of its pre- and post-explosion SEDs suggest a progenitor mass of 15 < or equal to M(sub prog) < 25 Stellar Mass.

Vinko, J.↗
NASA NTRS2003

Swell Sleeves for Testing Explosive Devices

A method of testing explosive and pyrotechnic devices involves exploding the devices inside swell sleeves. Swell sleeves have been used previously for measuring forces. In the present method, they are used to obtain quantitative indications of the energy released in explosions of the devices under test. A swell sleeve is basically a thick-walled, hollow metal cylinder threaded at one end to accept a threaded surface on a device to be tested (see Figure 1). Once the device has been tightly threaded in place in the swell sleeve, the device-and-swell-sleeve assembly is placed in a test fixture, then the device is detonated. After the explosion, the assembly is removed from the test fixture and placed in a coordinate-measuring machine for measurement of the diameter of the swell sleeve as a function of axial position. For each axial position, the original diameter of the sleeve is subtracted from the diameter of the sleeve as swollen by the explosion to obtain the diametral swelling as a function of axial position (see Figure 2). The amount of swelling is taken as a measure of the energy released in the explosion. The amount of swelling can be compared to a standard amount of swelling to determine whether the pyrotechnic device functioned as specified.

Hinkel, Todd J.↗
NASA NTRS2013

A Panchromatic View of the Restless SN 2009ip Reveals the Explosive Ejection of a Massive Star Envelope

The double explosion of SN 2009ip in 2012 raises questions about our understanding of the late stages of massive star evolution. Here we present a comprehensive study of SN 2009ip during its remarkable rebrightenings. High-cadence photometric and spectroscopic observations from the GeV to the radio band obtained from a variety of ground-based and space facilities (including the Very Large Array, Swift, Fermi, Hubble Space Telescope, and XMM) constrain SN 2009ip to be a low energy (E (is) approximately 10(exp 50) erg for an ejecta mass approximately 0.5 solar mass) and asymmetric explosion in a complex medium shaped by multiple eruptions of the restless progenitor star. Most of the energy is radiated as a result of the shock breaking out through a dense shell of material located at approximately 5 × 10( exp 14) cm with M approximately 0.1 solar mass, ejected by the precursor outburst approximately 40 days before the major explosion. We interpret the NIR excess of emission as signature of material located further out, the origin of which has to be connected with documented mass-loss episodes in the previous years. Our modeling predicts bright neutrino emission associated with the shock break-out if the cosmic-ray energy is comparable to the radiated energy. We connect this phenomenology with the explosive ejection of the outer layers of the massive progenitor star, which later interacted with material deposited in the surroundings by previous eruptions. Future observations will reveal if the massive luminous progenitor star survived. Irrespective of whether the explosion was terminal, SN 2009ip brought to light the existence of new channels for sustained episodic mass loss, the physical origin of which has yet to be identified.

view↗
NASA NTRS2013

A Panchromatic View of the Restless SN 2009ip Reveals the Explosive Ejection of a Massive Star Envelope

The double explosion of SN 2009ip in 2012 raises questions about our understanding of the late stages of massive star evolution. Here we present a comprehensive study of SN 2009ip during its remarkable rebrightenings. High-cadence photometric and spectroscopic observations from the GeV to the radio band obtained from a variety of ground-based and space facilities (including the Very Large Array, Swift, Fermi, Hubble Space Telescope, and XMM) constrain SN 2009ip to be a low energy (E approximating 10(exp 50) ergs for an ejecta mass approximating 0.5 M solar mass) and asymmetric explosion in a complex medium shaped by multiple eruptions of the restless progenitor star. Most of the energy is radiated as a result of the shock breaking out through a dense shell of material located at approximately 5 times 10 (exp 14) cm with M approximating 0.1 solar mass, ejected by the precursor outburst approximately 40 days before the major explosion. We interpret the NIR (Near Infrared) excess of emission as signature of material located further out, the origin of which has to be connected with documented mass-loss episodes in the previous years. Our modeling predicts bright neutrino emission associated with the shock break-out if the cosmic-ray energy is comparable to the radiated energy. We connect this phenomenology with the explosive ejection of the outer layers of the massive progenitor star, which later interacted with material deposited in the surroundings by previous eruptions. Future observations will reveal if the massive luminous progenitor star survived. Irrespective of whether the explosion was terminal, SN 2009ip brought to light the existence of new channels for sustained episodic mass loss, the physical origin of which has yet to be identified.

massive↗
DOE OSTI2026

Critical Review of Brazil Disk Techniques for Tensile Strength Characterization With an Emphasis on High Explosive Materials

Mechanical properties are a critical performance metric for many high explosive (HE) materials and tensile strength properties are particularly important. Direct tensile measurements using dogbone shaped samples are the gold standard but they have the disadvantage that they are fairly large and require samples machined from billets. Diametral compression, more commonly known as Brazil disk (BD) testing, is an indirect method for measuring tensile strength on smaller and more easily fabricated samples. A review of the BD literature is presented with an emphasis on tensile strength measurements in high explosive materials. BD literature is reviewed in three primary areas: (i) rocks and concrete, (ii) pharmaceutical materials, and (iii) high explosive materials. The literature for rocks/concrete is extensive and dates back over 80 years; despite this there is no consensus on the validity/accuracy of the BD technique or the optimal variant of the BD technique to employ. The pharmaceutical literature is the opposite, being limited in scope and quantity of studies. BD literature on high explosive materials falls in between, not as impressive as in the rocks/concrete community but more substantiative than in the pharmaceutical community. After the review of the literature practical parameters for HE BD testing and recommended future work is discussed.

Brazil disk↗
DOE OSTI2026

Ultrasound Characterization of Plastic Bonded Explosives With Varied Binder Content and Density

Advanced explosive formulations and methods of production require rapid characterization for both processes and materials. Here, we present results for ultrasound characterization of a plastic bonded explosive (PBX) formulation as a function of binder weight percent and pressing density using through-transmission sound speed measurements. The explosive in this study was composed of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) combined with the fluoropolymer binder Kynar Ultraflex B. Binder content ranged from 2.6 wt.% to 11.5 wt.% with associated explosive formulation densities from 1.69 g/cc to 1.89 g/cc. We find linear and nonlinear changes in longitudinal and shear sound speeds, peak frequencies, and measured elastic properties for the different PBX formulations. These measured changes can differentiate the tested formulations, highlighting the potential for ultrasound as a nondestructive characterization method for newly-formulated PBXs. We also demonstrate through-transmission measurements using different coupling media and present results from an ultrasound technique called resonant ultrasound spectroscopy (RUS). Both transmission and RUS approaches may allow for rapid and even automated characterization of PBX components suitable for high-throughput manufacturing operations.

Engineering↗
DOE OSTI2025

Designing Yield Grids for Airborne Nuclear Explosions to Maintain Decrements in Rayleigh Waveform Amplitudes

This document details a method for selecting grid points that sample the yields of airborne, low yield nuclear explosions that constrains the relative size of seismic waveforms sourced by explosions that are parameterized by this grid. In detail, we impose this constraint so that the vertical component of ground displacement that is sourced by explosions with a fixed height of burst (HoB) at grid point k change by a fixed factor of a when compared to the waveform amplitudes sourced by explosions at grid point k + 1, as observed at a fixed standoff distance. This gridding thereby preserves amplitude ratios along the grid so that they are agnostic to k. We assert that this method is useful in tests that apply algorithms against synthetic or augmented datasets for which the performance of the algorithm must be measured against source size, and waveform amplitudes must change uniformly (e.g., Berg et al, 2025).

58 GEOSCIENCES↗
DOE OSTI2025

Primordial Black Hole Triggered Type Ia Supernovae. I. Impact on Explosion Dynamics and Light Curves

Primordial black holes (PBHs) in the asteroid-mass window are compelling dark matter candidates, made plausible by the existence of black holes and by the variety of mechanisms of their production in the early Universe. If a PBH falls into a white dwarf (WD), the strong tidal forces can generate enough heat to trigger a thermonuclear runaway explosion, depending on the WD’s mass and the PBH’s orbital parameters. In this work, we investigate the WD explosion triggered by the passage of a PBH. We perform 2D simulations of the WD undergoing thermonuclear explosion in this scenario, with the predicted ignition site as a parameter assuming the deflagration–detonation transition model. We study the explosion dynamics, and predict the associated light curves and nucleosynthesis. We find that the model sequence predicts light curves which align with the Phillips relation (B max versus ΔM 15 ). Our models hint at a unifying approach in triggering Type Ia supernovae without involving two distinctive evolutionary tracks.

Dark matter↗
DOE OSTI2026

A comparison of long-term 37 Ar and 39 Ar transport and implications for 39 Ar as a persistent indicator of underground nuclear explosions

Measurements were first made in 2016 of legacy 39 Ar gas from the decades-old Barnwell underground nuclear explosion site within the Nevada National Security Site. This has raised the question of the ubiquity of the radionuclide 39 Ar following underground nuclear explosions in general locations. This article presents a high-level evaluation of the scientific case for using 39 Ar as a long-term indicator of underground nuclear explosions. Assessment is made based on a broad set of assumptions to reasonably estimate the persistence of 39 Ar in the subsurface environment following an explosion to establish potential detectability years to decades after the originating event.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

A novel ignition model for low velocity impact of heterogeneous explosives based on interacting hot spots

While numerous studies have focused on the ignition of explosives occurring in high velocity impact and the associated shock-to-detonation transition, there has been growing interest in developing computational models focused on low-velocity impact regimes. A predictive low-velocity impact ignition model will be important for analyzing high explosive safety and potential accident scenarios. This work introduces a novel ignition model based on the concept of thermally interacting hot spots to simulate low velocity impacted heterogeneous explosives where observed ignition times are on the order of milliseconds. The model asserts that relevant hot spots are micron-sized, the typical separation between neighboring hot spots is on the order of a hundred microns, and that neighbors interact thermally through heat conduction across the interstitial region between them. To achieve tractable numerical solutions, hot spots are assumed to form a periodic array as opposed to the highly irregular positioning in an actual explosive. This idealization allows a single two hotspot system to characterize the ignition process. Consequently, the model is referred to as the two hot spot Frank-Kamenetskii ignition model. In the present study, hot spots are modeled as constant heat sources terms, but this can be extended to include grain-scale phenomena like frictional heating of micron-sized growing cracks that are confined under high pressure. Because the micron-sized features are below the scale that can be efficiently resolved at a systems level, an efficient subscale scheme based on the Method of Weighted Residuals (MWR) is used to efficiently solve the equations. In conclusion, we carry out numerical examples and analytic predictions illustrating the accuracy and the functioning of the model.

97 MATHEMATICS AND COMPUTING↗