Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered dislocations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The effects of surface films on mechanical behavior of B2 ordered intermetallic alloys

Surface films deposited on body-centered cubic metals can greatly reduce the yield and flow stresses and increase the ductility at low homologous temperatures. This softening process is associated with the ability of the film-substrate interface to generate large populations of mobile edge dislocations. This phenomenon is extended to B2 ordered intermetallic alloys, which display many deformation characteristics of bcc metals. Single crystal NiAl coated with thermally formed oxide films and polycrystalline FeAl with electrochemically formed Fe-Al-O films display film softening at and below room temperature. The extent of film softening is shown to depend on many factors, including crystal orientation, deformation temperature, operative slip systems, film thickness, film adherence, and film and substrate properties.

Noebe, R. D.↗
DOE OSTI2020

Quantitative nanoscale tracking of oxygen vacancy diffusion inside single ceria grains by in situ transmission electron microscopy

Oxygen vacancy formation and migration in ceria is critical to its electrochemical and catalytic properties in systems for chemical and energy transformation, but its quantification is rather challenging especially at atomic-scale because of disordered distribution. Here we report a rational approach to track oxygen vacancy diffusion in single grains of pure and Sm-doped ceria at -20 °C to 160 °C using in situ (scanning) transmission electron microscopy ((S)TEM). To create a gradient in oxygen vacancy concentration, a small region (~30 nm in diameter) inside a ceria grain is reduced to the C-type CeO 1.68 phase by the ionization or radiolysis effect of a high-energy electron beam. The evolution in oxygen vacancy concentration is then mapped through lattice expansion measurement using scanning nano-beam diffraction or 4D STEM at a spatial resolution better than 2 nm; this allows direct determination of local oxygen vacancy diffusion coefficients in a very small domain inside pure and Sm-doped ceria at different temperatures. Further, the activation energies for oxygen transport are determined to be 0.59, 0.66, 1.12, and 1.27 eV for pure CeO 2 , Ce 0.94 Sm 0.06 O 1.97 , Ce 0.89 Sm 0.11 O 1.945 , and Ce 0.8 Sm 0.2 O 1.9 , respectively, implying that activation energy increases due to impurity scattering. The results are qualitatively supported by density functional theory (DFT) calculations. In addition, our in situ TEM investigation reveals that dislocations impede oxygen vacancy diffusion by absorbing oxygen vacancies from the surrounding areas and pinning them locally. With more oxygen vacancies absorbed, dislocations show extended strain fields with local tensile zone sandwiched between the compressed ones. Therefore, dislocation density should be reduced in order to minimize the resistance to oxygen vacancy diffusion at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying the Role of APB Tubes on the Work-hardening of Ordered Phases

For sixty years, it has been theorized that antiphase boundary (APB) tubes, which are defects produced by deformation, contribute to the high strength of ordered alloys or intermetallic compounds. The concept of an APB tube was originally proposed by Vidoz and Brown [A.E. Vidoz, L.M. Brown, "On work-hardening in ordered alloys", Philosophical Magazine, 7 (1962) 1167–1175] in 1962 to explain the ~50% increase in strength observed when an alloy, such as Ni 3 Fe, is chemically ordered compared to when it is disordered. The existence of APB tubes was only definitively confirmed by Chou and Hirsch in 1981 [C.T. Chou, P.B. Hirsch Antiphase domain boundary tubes in plastically deformed ordered Fe 30.5 at.% Al alloy, Philosophical Magazine, A. 44 (1981) 1415–1419] using a transmission electron microscope (TEM). Prior to the current work, there had been no studies trying to correlate the presence of APB tubes with their effect on the mechanical properties. The main finding of this project was that APB tubes do not contribute to the strength of the strongly-ordered intermetallic compounds FeAl and Ni 3 Al. This was shown by removing the APB tubes by heating the materials and showing that the mechanical properties were unaffected. In addition, in-situ deformation experiments were undertaken in a TEM on both disordered and ordered Ni 3 Fe, in which it was shown that defects (superdislocations) in the ordered alloy underwent many more interaction events than defect (dislocations) in the disordered alloy. This difference can explain the increase in the increase in strength observed when this material is ordered. The project supported a PhD student, Rachel Osmundsen, who successfully defended her thesis in April, 2022. It also supported the principal investigator, Ian Baker, two PhD exchange students and an undergraduate researcher. The work involved collaborations with the following people and use of the following facilities: Dr. Si Chen, Advanced Photon Source at Argonne National Laboratory, for synchrotron X-ray diffraction; and Dr. Katherine Shanks and Dr. Kelly Nygren, Cornell High Energy Synchrotron Source (CHESS), for synchrotron X-ray diffraction. The work led to 12 papers published in refereed journals with two papers currently submitted to journals. There were also 16 presentation made at conferences and universities on the work, ten of which were invited.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Fermi energy control of vacancy coalescence and dislocation density in melt-grown GaAs

A striking effect of the Fermi energy on the dislocation density in melt-grown GaAs has been discovered. Thus, a shift of the Fermi energy from 0.1 eV above to 0.2 eV below its intrinsic value (at high temperature, i.e., near 1100 K) increases the dislocation density by as much as five orders of magnitude. The Fermi energy shift was brought about by n-type and p-type doping at a level of about 10 to the 17th per cu cm (under conditions of optimum partial pressure of As, i.e., under optimum melt stoichiometry). This effect must be associated with the fact that the Fermi energy controls the charge state of vacancies (i.e., the occupancy of the associated electronic states) which in turn must control their tendency to coalesce and thus the dislocation density. It appears most likely that gallium vacancies are the critical species.

Lagowski, J.↗
DOE OSTI2020

A predictive strain-gradient model with no undetermined constants or length scales

A general meso–scale (GM) crystal plasticity (CP) model was developed that accounts for lower-order (strain hardening) and higher-order (internal stress) effects of geometrically necessary dislocations (GNDs). It is predictive: no arbitrary parameters or length scales were invoked and no ad hoc numerical techniques were employed. It uses general stress field equations for GND content and a novel harmonization technique to enforce consistency of elastic long-range singular defect fields with applied elastic-plastic fields. The model facilitates implementation in commercial finite element programs without requiring special elements, special boundary conditions, or access to element shape functions. GM simulations confirmed, with improved accuracy, previously published predictions of the Hall-Petch effect, Bauschinger effect, and anelasticity. Previously unpredicted phenomena were also predicted: anelasticity and hysteresis for single Ta crystals and strain-hardening stagnation. The internal stresses (higher-order effect) dominate at large length scales, while at small length scales, the GND density hardening (lower-order effect) dominates. As a result, GM predicts that strain heterogeneity and consequent GND internal stresses are important factors in anelasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗
DOE OSTI2025

An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds

The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Local structural ordering determines the mechanical damage tolerance of amorphous grain boundary complexions

Amorphous grain boundary complexions act as toughening features within a microstructure because they can absorb dislocations more efficiently than traditional grain boundaries. This toughening effect should be a strong function of the local internal structure of the complexion, which has recently been shown to be determined by grain boundary crystallography. To test this hypothesis, molecular dynamics are used here to simulate dislocation absorption and damage nucleation for complexions with different distributions of structural short-range order. Here, the complexion with a more disordered structure away from the dislocation absorption site is actually found to better resist crack nucleation, as damage tolerance requires delocalized deformation and the operation of shear-transformation zones through the complexion thickness. The more damage tolerant complexion accommodates plastic strain efficiently within the entire complexion, providing the key mechanistic insight that local patterning and asymmetry of structural short-range order controls the toughening effect of amorphous complexions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Dislocation-density evolution and pileups in bicrystalline systems

Here, a dislocation-density crystalline plasticity (DCP) framework based on total and partial dislocation densities interactions was used to investigate the behavior of Cu/Pb bicrystals with a focus on GB effects. The modeling predictions were validated with bicrystal compression micropillar experiments. A key new aspect of the modeling approach is to account for partial dislocation-densities. A GB formulation that is directly linked to GB energies was used to monitor GB transmission and blockages, such that pileups can be monitored and predicted at the GB interfaces for misorientations. The predictions indicate that pileups can form due to fully and partially blocked slip-rates and perfect and partial dislocation-densities. As the nominal strain increases from five to fifteen percent, dislocation-densities and pileups significantly increase by almost an order of magnitude. The proposed validated approach provides a microstructural scale predictive framework that accounts for a myriad of defects related to the interactions of partial and perfect dislocation densities that interact at highly misoriented GBs; it is these interactions that are critical to the formation and evolution of dislocation-density pileups that can lead to physically limiting stress accumulations in bicrystals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstructural and material property changes in severely deformed Eurofer-97

Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT at room temperature to a maximum shear strain of 230, the average grain size reduced by a factor of ~30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K – 800 K. Irradiation with 20 MeV Fe-ions to ~0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation only had a minor effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. Microstructural and material property changes are dominated by deformation compared to irradiation. In light of this, the benefits of using HPT to improve the irradiation resistance of Eurofer-97 are limited. These results provide a multi-faceted view of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.

ion-irradiation↗
DOE OSTI2023

Atomic-scale identification of defects in alite

Crystallographic defects play a crucial role in cement hydration, with initial dissolution being dominated by the formation of etch pits that rely on the intersection of defects on surfaces. However, the defects present in cement particles have remained a mystery due to the lack of detailed direct observation at the atomic scale. In this study, we used scanning transmission electron microscopy to unravel the defects in alite particles at the single-atom level. Our observations identified different types of defects, including vacancies, doping, dislocations, rough surfaces, and grain boundaries. Atomic ordering in the alite crystal was further examined based on our single-atom recognition method. Our findings indicate that defects in cement particles may serve as reactive sites during the early hydration stage, facilitating the initial dissolution and providing nucleation sites for hydration products. Finally, this work provides insights into cement defect formation at the single-atom level and offers new opportunities in tuning the hydration process through defect engineering of cement particles.

36 MATERIALS SCIENCE↗
NASA NTRS1991

The effect of microgravity on protein crystal growth

Based on the results of microgravity crystallization experiments using the protein canavalin aboard four separate U.S. Space Shuttle missions, visual observations and diffraction data are presented that support the contention that protein crystals of improved quality can be obtained in a microgravity environment. With canavalin, no significant increase in resolution was noted, but an overall improvement in diffraction quality, as judged by statistical analyses of the data, was clear. This improvement in quality may be due primarily to the elimination of defects and dislocations rather than an overall enhancement of order. The mechanism for this improvement may be microgravity-stabilized depletion zones that develop around growing crystals that establish and maintain optimal growth conditions more rapidly following nucleation. Such zones would be destroyed by convective flow effects in earth's gravity.

Mcpherson, Alexander↗
DOE OSTI2022

Dynamic Measurements of the Structural Evolution of Material Defects at the Mesoscale

This is a technical report to be published as part of the FY2021 annual overview package. We have designed experiments and developed analytical methods using images from x-ray and electron microscopy in order to quantify the behavior of crystal dislocation defects at their native nanometer-length and micro-length scales. The results of these analyses are used to directly inform theoretical physics models and guide interpretation of dark field x-ray microscopy (DFXM) images that offer spatial resolution surpassing the resolution of beamline optics. Additionally, we developed new analytical methods to automate the alignment of optics hardware used in both synchrotron and x-ray free electron laser beamline facilities. The tools and workflows developed for this project are now being deployed as proof-of-concept in reaction history analysis (RHA) for future programmatic integration.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Chemical complexity suppresses interstitial solute segregation to screw dislocation cores in the bcc NbTaTiHfZr high-entropy alloy

Recent reports suggest that interstitial solute additions to body-centered cubic (bcc) high-entropy alloys (HEAs) may enhance their mechanical properties. However, details of interactions between interstitial atoms and dislocations in these HEAs remain incompletely understood. Using first-principles calculations, we examine the energetics of C, N, and O interstitial solutes in elemental bcc metals and NbTaTiHfZr, focusing on their segregation in screw dislocation cores. We examine two types of core sites and show that the low-energy configuration and associated segregation energy depend on the transition metal group. In NbTaTiHfZr, we find that chemical complexity substantially suppresses interstitial segregation in dislocation cores, as fluctuations in bulk solute energies induce energetically favorable sites that disfavor segregation to core sites. Local chemical order further enhances this effect by promoting solute clustering away from dislocation cores. These findings reveal fundamental differences between the behavior of interstitial atoms in elemental metals and HEAs, with implications for high-temperature plasticity and dynamic strain aging.

Body-centered cubic transition metals↗
DOE OSTI2020

The Scattering of Phonons by Infinitely Long Quantum Dislocations Segments and the Generation of Thermal Transport Anisotropy in a Solid Threaded by Many Parallel Dislocations

A canonical quantization procedure is applied to the interaction of elastic waves—phonons—with infinitely long dislocations that can oscillate about an equilibrium, straight line, configuration. The interaction is implemented through the well-known Peach–Koehler force. For small dislocation excursions away from the equilibrium position, the quantum theory can be solved to all orders in the coupling constant. We study in detail the quantum excitations of the dislocation line and its interactions with phonons. The consequences for the drag on a dislocation caused by the phonon wind are pointed out. We compute the cross-section for phonons incident on the dislocation lines for an arbitrary angle of incidence. The consequences for thermal transport are explored, and we compare our results, involving a dynamic dislocation, with those of Klemens and Carruthers, involving a static dislocation. In our case, the relaxation time is inversely proportional to frequency, rather than directly proportional to frequency. As a consequence, the thermal transport anisotropy generated on a material by the presence of a highly-oriented array of dislocations is considerably more sensitive to the frequency of each propagating mode, and, therefore, to the temperature of the material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

The hierarchical energy landscape of screw dislocation motion in refractory high-entropy alloys

High-entropy alloys (HEAs) with concentrated solid solutions are conceived to possess a rugged atomic and energy landscape in which dislocation motion necessarily proceeds to accommodate mechanical deformation. Fundamental questions remain as to how rough the energy landscape is and to what extent it can be influenced by the local ordering of their constituent elements. Here, we construct and report the potential energy landscape (PEL) governing screw dislocation motion in refractory HEAs that reveals a hierarchical and multilevel structure with a collection of small basins nested in large metabasin. This striking feature pertaining to HEAs exerts a trapping force and back stress on saddle point activations, retarding dislocation movement. Further, by introducing chemical short-range order, the energy landscape is smoothed but skewed to different degrees that shifts the rate-liming process from kink-glide to kink-pair nucleation. The chemical disorder-roughened PEL in HEAs, analogous to structural disorder induced in metallic glasses, signifies the role of various barrier-hopping processes underlying the extraordinary mechanical behaviors of the two distinct groups of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy

In this work, we investigate the operation of Frank-Read (FR) sources in a refractory multi-principal element alloy (MPEA). Simulations of discrete dislocation motion in MPEAs is enabled by the development of a phase field dislocation dynamics model that treats the atomic-scale fluctuations in lattice energies across the glide plane, present due to local ordering in the chemical composition within the nominally random MPEA atomic structure. We consider, through simulation, a range of length scales over which ordering occurs, varying from short-range lengths, a few times dislocation core width, to long-range lengths, an order of magnitude longer than the core. Characteristic of this body-centered cubic MPEA, the simulations also include screw/edge character dependence in glide resistance, as informed by atomic scale simulation. The critical stresses to activate the source for the same source size are found to be statistically distributed, as a direct consequence of the underlying variation in lattice energy. Furthermore, analysis of critical state for activating edge and screw FR sources in the MPEA reveals that FR source operation occurs via a two-step mechanism, involving athermal kink-pair formation, unlike the conventional FR source operation in a material with no composition fluctuations. This mechanism lowers the average critical stress required to activate the FR source and causes the statistical dispersion in critical stress to depend on the range of composition ordering. More importantly, it leads to a more severe dependence of source strength on FR source length than predicted by line tension alone.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Data-driven electron-diffraction approach reveals local short-range ordering in CrCoNi with ordering effects

Abstract The exceptional mechanical strength of medium/high-entropy alloys has been attributed to hardening in random solid solutions. Here, we evidence non-random chemical mixing in a CrCoNi alloy, resulting from short-range ordering. A data-mining approach of electron nanodiffraction enabled the study, which is assisted by neutron scattering, atom probe tomography, and diffraction simulation using first-principles theory models. Two samples, one homogenized and one heat-treated, are observed. In both samples, results reveal two types of short-range-order inside nanoclusters that minimize the Cr–Cr nearest neighbors (L1 2 ) or segregate Cr on alternating close-packed planes (L1 1 ). The L1 1 is predominant in the homogenized sample, while the L1 2 formation is promoted by heat-treatment, with the latter being accompanied by a dramatic change in dislocation-slip behavior. These findings uncover short-range order and the resulted chemical heterogeneities behind the mechanical strength in CrCoNi, providing general opportunities for atomistic-structure study in concentrated alloys for the design of strong and ductile materials.

36 MATERIALS SCIENCE↗