Search NASA⌕ Search

SEARCH · Search NASA

Results for “output feedback control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Flight control law synthesis for an elastic vehicle by eigenspace assignment

Eigenspace assignment is explored as a control-law synthesis approach for 'shaping' the transient response of an elastic aircraft. A direct technique is utilized for synthesizing a full-state- as well as a reduced-order-output-feedback control law and the selection of the desired eigenspace is discussed. Robustness issues and results are evaluated and robustness recovery with full state estimation is demonstrated. Also, an appropriate implementation of state estimation to preserve the desired transient response (or desired eigenspace) is presented. Problems regarding actuator bandwidth and unmodeled modes are noted.

Schmidt, D. K.↗
NASA NTRS1987

Investigation of control law for active flutter suppression

Discussed is the technology of active flutter suppression research by the use of the wind-tunnel model of a delta wing with low aspect ratio. The research includes the establishment of a mathematical model for the servo-aeroelastic system, and the synthesis and analysis of sub-optimal output feedback control laws for active flutter suppression.

Wang, Weipeng↗
NASA NTRS2002

On the validity of the double integrator approximation in deep space formation flying

Free-flying models are commonly used f o r path planning and open loop control design (i. e., guidance design) and translational feedback control design (i. e., control design) for deep space precision formation flying. The free flying model, essentially a double integrator, results from discarding small terms in the relative spacecraft equations of motion. While the magnitude of these discarded terms may be small, one must show that their dynamic effects are small as compared to the precision performance requirements. We do so by deriving a theoretical method for bounding the difference between the solution of a nonlinear truth model of the relative translational spacecraft dynamics and a Simplified linear time-invariant model. Presently, the method incorporates feedforward and static output feedback control. The method is applied to a Terrestrial Planet Finder- based example. Using only feedforward control (guidance) the free-flying model and a Hill- Clohessy- Wiltshire Equations-based model are shown to be accurate to 1 c m for up to 4 and 30 hours, respectively. Also shown is that the simplest free-flying model may not be sufficient for low-gain feedback control design-closed-loop tracking errors can be as large as 8 meters.

formation flying free flying model double integrat↗
NASA NTRS1985

Numerical and experimental evaluation for single-axis control of an LSS laboratory model

One of the major problems of LSS attitude control design stems from the modeling uncertainties due to modal truncation errors and modal parameter estimation errors. This modeling problem is investigated by evaluating poles and zeros of the frequency response functions, described in terms of constrained or unconstrained modes. The frequency domain approach is utilized to evaluated the results of modal analyses and direct output feedback controller experiments using a simple flexible spacecraft model consisting of a rigid primary body and flexible aluminum beam(s) with a control moment gyro as an actuator. The modal data are compared under the conditions that the model is constrained as the canti-lever and it is rotationally free on a single-axis air bearing table. In addition, the open-loop responses are experimentally examined under the impulsive disturbance to the appendage. The results of the control experiments show that the first vibration mode of the appendage and the interacted rotational motion of the primary body are damped in a short time as predicted by the numerical analysis, to produce damping ratio of 10-20%.

Ohkami, Y.↗
NASA NTRS1990

Extended implicit model following as applied to integrated flight and propulsion control

An extended model-following control-synthesis method, including loop-transfer recovery, is presented and applied to synthesize control laws for integrated flight and propulsion control (IFPC). The vehicle considered is representative of an unstable modern fighter aircraft; with a two-dimensional thrust-vectoring and thrust-reversing nozzle. The linearized design model includes both airframe and engine dynamics. A model-following formulation of the LQR problem is extended to handle this hybrid problem. Compensators are then obtained to realize an output-feedback control law, by using a loop-transfer-recovery procedure. The airframe and engine responses are decoupled, and perfect airframe response following is obtained. The loop transfers also reveal good stability robustness and reasonable loop cross-over frequencies that would not lead to excessive actuation requirements.

Schmidt, David K.↗
NASA NTRS2015

LMI-Based Multiobjective Optimization and Control of Flexible Aircraft Using VCCTEF

This paper considers the control of coupled aeroelastic aircraft model with Variable Camber Continuous Trailing Edge Flap (VCCTEF) system. The relative motion between two adjacent flaps is constrained and this actuation constraint problem is converted into an output covariance constraint problem, and therefore can be formulated using linear matrix inequalities (LMIs). A set of LMI conditions is derived for the design of an observer-based dynamic output feedback controller for VCCTEF configured aeroelastic aircraft model. The proposed controller is then applied to the NASA Generic Transport Model (GTM) for simulation, and the results demonstrate the efficacy of the proposed approach.

LMI control↗
NASA NTRS1990

Multivariable flight control synthesis and literal robustness analysis for an aeroelastic vehicle

An integrated flight/aeroelastic control law is developed analytically for a hypothetical large supersonic transport aircraft in which the first aeroelastic mode frequency of the fuselage (6 rad/sec) is near the short-period mode (2 rad/sec). The approach employed is based on a linear-quadratic-regulator (LQR) formulation (yielding model-following state-feedback gains), followed by asymptotic loop-transfer recovery of LQR robustness (to produce an output-feedback control law). The derivation is outlined, and numerical results comparing the performance and multivariate stability robustness of the present controller with those of a classical controller are presented in graphs. The two controllers are shown to have similar characteristics, even with respect to the sources of limitations on robustness.

Schmidt, David K.↗
NASA NTRS1992

Closed-loop transfer recovery with observer-based controllers. I - Analysis. II - Design

A detailed study is presented of three fundamental issues related to the problem of closed-loop transfer (CLT) recovery. The first issues concerns what can and cannot be achieved for a given system and for an arbitrary target CLT function (TCLTF). The second issue involves developing necessary and/or sufficient conditions for a TCLTF to be recoverable either exactly or approximately. The third issue involves the necessary and/or sufficient conditions on a given system such that it has at least one recoverable TCLTF. The results of the analysis identify some fundamental limitations of the given system as a consequence of its structural properties which enables designers to appreciate at the outset different design limitations incurred in the synthesis of output-feedback controllers. Then, the actual design of full-order or reduced-order observer-based controllers is addressed which will achieve as close as possibly the desired TCLTF. Three design methods are considered: (1) the ATEA method, (2) a method that minimizes the H2-norm of a recovery matrix, and (3) a method that minimizes the respective H(infinity) norm. The relative merits of the methods are discussed.

Chen, Ben M.↗
NASA NTRS2001

Structural Damage Detection Using Virtual Passive Controllers

This paper presents novel approaches for structural damage detection which uses the virtual passive controllers attached to structures, where passive controllers are energy dissipative devices and thus guarantee the closed-loop stability. The use of the identified parameters of various closed-loop systems can solve the problem that reliable identified parameters, such as natural frequencies of the open-loop system may not provide enough information for damage detection. Only a small number of sensors are required for the proposed approaches. The identified natural frequencies, which are generally much less sensitive to noise and more reliable than the identified natural frequencies, are used for damage detection. Two damage detection techniques are presented. One technique is based on the structures with direct output feedback controllers while the other technique uses the second-order dynamic feedback controllers. A least-squares technique, which is based on the sensitivity of natural frequencies to damage variables, is used for accurately identifying the damage variables.

Lew, Jiann-Shiun↗
NASA NTRS1985

Optimal output feedback design of systems with ill-conditioned dynamics

Singular perturbation concepts are exploited to develop a procedure for designing a constant gain, output feedback control system. It is assumed that the original system is ill-conditioned in the sense that the plant contains widely separated dynamics, and that an accurate description for the high frequency behavior may not be available. The design procedure attempts to stabilize the system by minimizing a quadratic cost function made up of the control and states associated with a reduced order (low frequency) model for the plant, and a measure of stability for the neglected fast dynamics. The resulting design procedure does not require knowledge of the fast dynamics.

Calise, A. J.↗
NASA NTRS1987

Modal decoupling insensitivity

This note deals with the design of an output feedback control system such that selected closed-loop eigenvalues are insensitive, while the corresponding eigenvectors preserve a prescribed decoupling under parameter variation. This results in restricting specified elements of an eigenvector to be insensitive, rather than the entire eigenvector. This requirement is henceforth referred to as modal decoupling insensitivity. Sufficient conditions for modal decoupling insensitivity are derived. These conditions offer the advantage of increased flexibility in eigenvector assignment, but the constraint on the feedback matrix is more restrictive. A numerical example is presented to illustrate the design procedure.

Raman, K. V.↗
NASA NTRS1990

A global nonlinear tracking problem

The tracking problem for a globally minimum phase nonlinear system is considered. It is assumed that the signal to be tracked is slowly varying and a priori bounds on its magnitude are known. It is shown that if the system has bounded derivatives and exponentially stable zero dynamics then the system admits an output feedback controller which solves the tracking problem.

Dayawansa, W. P.↗
NASA NTRS1994

Dynamical observer for a flexible beam via finite element approximations

The purpose of this view-graph presentation is a computational investigation of the closed-loop output feedback control of a Euler-Bernoulli beam based on finite element approximation. The observer is part of the classical observer plus state feedback control, but it is finite-dimensional. In the theoretical work on the subject it is assumed (and sometimes proved) that increasing the number of finite elements will improve accuracy of the control. In applications, this may be difficult to achieve because of numerical problems. The main difficulty in computing the observer and simulating its work is the presence of high frequency eigenvalues in the finite-element model and poor numerical conditioning of some of the system matrices (e.g. poor observability properties) when the dimension of the approximating system increases. This work dealt with some of these difficulties.

Manitius, Andre↗
NASA NTRS2001

Alternate Forms of Relative Attitude Kinematics and Dynamics Equations

In this paper the alternate forms of the relative attitude kinematics and relative dynamics equations are presented. These developments are different from the earlier developments that have been presented in other publications. The current forms of equations have the advantage of being simpler than earlier ones. These equations are applied in developing the necessary kinematics and dynamics for relative navigation in formation flying and virtual platforms. These equations also have application in the implementation of nonlinear full state feedback and nonlinear output feedback control for large attitude angle acquisition and tracking. This paper presents simulations from such a full state feedback control application.

Xing, Guang Q.↗
NASA NTRS1984

Algorithms for output feedback, multiple-model, and decentralized control problems

The optimal stochastic output feedback, multiple-model, and decentralized control problems with dynamic compensation are formulated and discussed. Algorithms for each problem are presented, and their relationship to a basic output feedback algorithm is discussed. An aircraft control design problem is posed as a combined decentralized, multiple-model, output feedback problem. A control design is obtained using the combined algorithm. An analysis of the design is presented.

Halyo, N.↗
NASA NTRS1987

An optimal output feedback gain variation scheme for the control of plants exhibiting gross parameter changes

A concept for optimally designing output feedback controllers for plants whose dynamics exhibit gross changes over their operating regimes was developed. This was to formulate the design problem in such a way that the implemented feedback gains vary as the output of a dynamical system whose independent variable is a scalar parameterization of the plant operating point. The results of this effort include derivation of necessary conditions for optimality for the general problem formulation, and for several simplified cases. The question of existence of a solution to the design problem was also examined, and it was shown that the class of gain variation schemes developed are capable of achieving gain variation histories which are arbitrarily close to the unconstrained gain solution for each point in the plant operating range. The theory was implemented in a feedback design algorithm, which was exercised in a numerical example. The results are applicable to the design of practical high-performance feedback controllers for plants whose dynamics vary significanly during operation. Many aerospace systems fall into this category.

Moerder, Daniel D.↗
NASA NTRS1980

Output feedback non-linear decoupled control synthesis and observer design for manoeuvring aircraft

A study of the applicability of nonlinear decoupling theory to the design of control systems using output feedback for maneuvering aircraft is presented. The response variables chosen for decoupled control were angular velocity components along roll, pitch, and yaw axes, angle of attack (p), and angle of sideslip, using aileron, rudder, and elevator controls. An observer design for a class of nonlinear systems was presented and this method was used to estimate angle of attack and sideslip; an approximate observer was obtained by neglecting derivatives of p and aileron deflection angles and it was used in a simulation study. A simulation study showed that precise rapid combined lateral and longitudinal maneuvers can be performed; it was also demonstrated that a bank-angle-command outer loop could be designed for precise bank angles changes and simultaneous large lift maneuvers.

Singh, S. N.↗