The influence of gas-saturated layers on the strength and plastic properties of titanium alloys
Effect of gas saturated layers on strength and plastic properties of titanium alloys
NOTCH STRENGTH↗
SEARCH · Search NASA
Results for “plastic oxidation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Effect of natural carbon filler on thermo-oxidative degradation of thermoplastic-based composites
Here thermo-oxidative degradation of thermoplastic-based composites filled with two types of carbon filler including bituminous (Pittsburgh No.8, P8) and sub-bituminous (Powder River Basin, PRB) coals were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis. Oxidation induction time (OIT) and activation energy (AE) for coal plastic composites (CPCs), HDPE, and commercially available wood plastic composites (WPCs) were determined using isothermal and isoconversional kinetic methods. OIT values for CPC increased with coal content, indicating higher thermo-oxidative stability. AE values obtained using isothermal method were 52–116 kJ/mol for all CPC formulations, 32 kJ/mol for HDPE, and 33–114 kJ/mol for WPCs. AEs for CPCs obtained using isoconversional methods were not constant but rather dependent on the degree of degradation with CPC/ P8 coal possessing higher overall AE. Incorporating coal into HDPE increased thermo-oxidative stability of the resulting composite, indicating coal potentially acts as a natural primary and secondary antioxidant for polymer materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Photonic curing for innovative fabrication of flexible metal oxide optoelectronics
Abstract Flexible optoelectronics, based on non-planar substrates, hold promise for diverse applications such as wearables, health monitors, and displays due to their cost-effective manufacturing methods. Despite the superior properties of metal oxides, the challenge of processing them at high temperatures incompatible with plastic substrates necessitates innovative annealing approaches. Photonic curing, which delivers microsecond to millisecond broadband (200–1500 nm) light pulses on a sample, emerges as a viable solution. Depending on the optical properties, the targeted film absorbs the radiant energy resulting in rapid heating while the transparent substrate absorbs a minimal amount of light and remains at ambient temperature. The light intensity can be high, but since the light pulse is short, the total energy absorbed by the sample remains low and will not damage the plastic substrate. This perspective explores the innovative application of photonic curing to fabricate flexible metal oxide optoelectronics, including thin-film transistors, metal–insulator–metal devices, solar cells, transparent conductors, and Li batteries, emphasizing the conversion of sol–gel precursors to metal oxides. However, this technique was initially developed for sintering metal nanoparticles to conductive patterns and poses intriguing challenges in explaining its mechanism for metal oxide conversion, especially considering the limited absorption of visible light by most sol–gel precursors. The review delves into UV-induced photochemistry, common flexible metal-oxide optoelectronic components, and non-intuitive distinctions between photonic curing and thermal annealing. By elucidating the distinctive role of photonic curing in overcoming temperature-related challenges and advancing the fabrication of flexible metal oxide optoelectronics, this perspective offers valuable insights that could shape the future of flexible optoelectronics.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Fluidized-Bed Gasification of Coal-Biomass-Plastics for Hydrogen Production
Coal is one of the most abundant fossil energy resources in the United States and in the world. The recoverable reserves in the United States are estimated to be about 252 billion tons – more than 350 years of supply at current rates of usage. However, the share of coal in total primary energy consumption in the US has been declining over the years. The decline of coal is mainly attributed to cheap natural gas and precipitous declines in the cost of electricity production from renewable technologies such as wind and solar. Coal can potentially be used if it is coupled with carbon-neutral feedstock such as biomass-agricultural residues, forest biomass, and forest residues. Co-gasification of coal and biomass can become a negative carbon emission technology if the carbon dioxide (CO 2 ) is captured and sequestered. Although the biomass gasification process has a lot of similarities to coal gasification, the large-scale adaptation of power production sourced from biomass has not come to fruition. The main reason is that the power production from biomass is still expensive when compared with natural gas or coal power technologies. To address the feedstock cost, one approach is to use low-cost feedstocks, such as municipal solid wastes (MSW) or plastics, for gasification. Gasification involves the partial oxidation of coal and/or biomass feedstocks to produce a combustible fuel called synthesis gas (syngas) which is composed of carbon monoxide (CO), hydrogen (H 2 ), CO 2 , methane (CH 4 ), nitrogen (N 2 ), water (H 2 O), and other compounds that might be considered as contaminants. Raw syngas from gasification must go through multiple steps to produce high-purity hydrogen. The specific steps depend upon the quality (gas composition, contaminants, and their concentration) and condition (pressure and temperature) of syngas. The long-term goal of the project was to utilize coal and plastics together with biomass to produce energy and fuels using a gasification platform while reducing greenhouse gas emissions. The main objective of this research was to examine gasification performance in a laboratory-scale fluidized-bed gasifier for hydrogen production. The specific objectives of the research were to: (i) study coal-plastic-biomass mixture flowability for consistent feeding in the gasifier; (ii) understand the gasification behavior of the mixture in steam and oxygen environments; (iii) perform thermal property characterization of ash and slag from the mixture feedstock and refractory-ash interface of the mixture under gasification conditions; and (iv) develop process models to determine the technology needed for syngas cleanup and contaminants. The study found that there was no apparent segregation when biomass, coal, and waste plastics were mixed together during feeding. Although there were differences in hydrogen production when individual feedstock were fed, the hydrogen concentration remained almost constant with various blends. Therefore, blending waste plastics with biomass and coal, which are all abundant, is a better approach for energy production. Results of the techno-economic analysis suggested that integration of advanced gasification (GTI’s R-GAS™) and syngas cleanup and conditioning technologies (RTI’s WDP and AFWGS) for clean hydrogen production resulted in substantial benefits, including significant capital cost and operating cost reductions. Advanced technologies resulted in 16% reduction in the hydrogen production cost (COH) from 2.94 $\$$/kg to 2.47 $\$$/g, with further scope for optimization and cost reduction. These advanced technologies also result in lower emissions, and improved energy efficiency.
01 COAL, LIGNITE, AND PEAT↗
Not Cutting Corners: Bioderived Triggers Driving Oxidative Main Chain Scission of Poly(ethylene terephthalate)
About 20–34 billion poly(ethylene terephthalate) (PET) bottles from the beverage industry leak into aquatic ecosystems annually, necessitating the development of urgent strategies to treat waterborne plastic pollution. Inspired by the scalability of water disinfection infrastructure and protocols, we present a dual depolymerization approach relying on oxidation, followed by hydrolysis. Incorporating bioderived monounsaturated C18 diacid (C18:1-DA) counits at low dosages (2–5%) in the PET backbone overcomes the diffusional limitations of depolymerizing PET in the solid state by suppressing the glass transition temperature of the copolymer by 20 °C. Cryomilled C18:1-PET powder suspended in an oxidant-loaded alkaline slurry underwent bulk depolymerization to oligomers at 80–100 °C via oxidative scissions at the internally located unsaturations. In contrast, conventional PET undergoes only minor end-chain scission under mild alkaline conditions. These oligomers are suitable for low-energy repolymerization or facile solvolysis to monomers. A permanganate-periodate oxidant couple demonstrated successful oxidation through the bulk of the polymer, which subsequently was hydrolyzed to monomers. Furthermore, this model system serves as a proxy for ozonolysis, followed by mild hydrolysis to reduce the energetics of alkaline hydrolysis. This integrated oxidation–hydrolysis strategy paves the way for the industrial adoption of cleaner, advanced oxidation processes, such as ozonolysis for plastic pretreatment, further enabling commercialized chemical recycling of unsaturation-containing polyesters.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Microwave-assisted depolymerization of PET over heterogeneous catalysts
The accumulation of plastic waste in the environment is rising and poses a significant environmental and health threat. Polyethylene terephthalate (PET), used mainly in single-use plastic bottles, accounts for a substantial fraction of this waste. The currently employed recycling strategies are inadequate to deal with the global plastic waste problem. PET glycolysis is a promising depolymerization method but has mainly been conducted using homogeneous catalysts; developing active and sustainable catalysts, and more energy-efficient processes remain challenges. Here, in this work, we implement microwave heating in PET glycolysis and identify ZnO as an excellent heterogeneous catalyst. We demonstrate the influence of ZnO's particle size and facet and hydrogen bonding on its activity. Finally, we demonstrate excellent performance for real-world post-consumer PET waste deconstruction with rapid depolymerization into bis(2-hydroxyethyl) terephthalate (BHET), achieving > 95% yields in less than 10 min. Cradle-to-gate life cycle assessment also indicates that BHET produced by ZnO-catalyzed glycolysis has lower global warming potential than the petrochemical-based production and homogeneously-catalyzed glycolysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Nanocomposite Scintillators Loaded With Hafnium Oxide and Phosphorescent Host and Guest for Gamma Spectroscopy
Not Available
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Water Weakening of Calcium Oxide
Chemomechanical processes such as water weakening can control the permeability and deformation of rocks and manmade materials. Here, atomistic modeling and nanomechanical experiments were used to identify molecular origins of chemomechanical effects in calcium oxide (CaO) and its effect on observed elastic, plastic, and brittle deformation. Classical molecular dynamics simulations with the bond order-based reactive force-field ReaxFF were used to assess brittle fracture. In the presence of water, CaO fractured earlier and more often during quasi-static loading, with a calculated reduction in fracture toughness of ~80% associated with changes in the stress distribution around the crack tip. Experimentally, elastic and plastic deformation of CaO surfaces exposed to water was assessed experimentally using in situ liquid nanoindentation. Nanoindentation showed that following exposure to water, the contact hardness decreased by 1–2 orders of magnitude and decreased the modulus by 2–3 orders of magnitude due to surface hydroxylation. Furthermore, the strong chemomechanical effects on the mechanical processes in CaO suggests that minerals with similar structures may exhibit comparable effects, influencing the stability of cements and geomaterials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Exceptional hardness in multiprincipal element alloys via hierarchical oxygen heterogeneities
Refractory multiprincipal element alloys (RMPEAs) are potential successors to incumbent high-temperature structural alloys, although efforts to improve oxidation resistance with large additions of passivating elements have led to embrittlement. RMPEAs containing group IV and V elements have a balance of properties including moderate ductility, low density, and the necessary formability. We find that oxidation of group IV-V RMPEAs induces hierarchical heterogeneities, ranging from nanoscale interstitial complexes to tertiary phases. This microstructural hierarchy considerably enhances hardness without indentation cracking, with values ranging between 12.1 and 22.6 GPa from the oxide-adjacent metal to the surface oxides, a 3.7 to 6.8× increase over the interstitial-free alloy. Our fundamental understanding of the oxygen influence on phase formation informs future alloy design to enhance oxidation resistance and obtain exceptional hardness while preserving plasticity.
Science & Technology - Other Topics↗
Photooxidative Upcycling of Post-Consumer Polystyrene Plastics into Phenol Using Eosin Y
Phenol is a commodity chemical frequently used in the manufacturing of resins, pharmaceuticals, and polymers. Yet, its industrial production from cumene requires harsh oxidative conditions followed by the Hock rearrangement. Polystyrene (PS) is a widely manufactured commodity polymer; however, it is among the least recycled plastics. Intriguingly, it is composed of contiguous cumene repeats that could serve as a phenol source, enhancing its value as a waste material. In this work, we leverage the similarity between cumene and PS to drive phenol production via a mild photooxidative HAT mechanism. Using Eosin Y under blue light irradiation and atmospheric pressure of oxygen, commercial PS resin was converted into hydroperoxyl PS. Subsequent acid-catalyzed Hock rearrangement afforded up to 21% yield of phenol. The photooxidation system was successfully applied to 8 post-consumer PS plastics, achieving phenol yields up to 23%, comparable to those of the current industrial Hock process. Our method introduces a mild catalytic strategy for converting post-consumer PS into phenol, offering a potential pathway for PS waste valorization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Carbon Nanotube and Graphene Oxide Reinforced Composites for Lightning Strike Protection of Composite Structures
Carbon fiber reinforced plastics (CFRP) composites have become the primary materials in the aerospace industry. Future transportation means, such as urban air mobility (UAM), will be employing CFRP structures. However, lightning strike damage on composite structures is a serious concern. CFRP composites possess low through-thickness electrical conductivity (≈ 1 S/m), which can cause extreme resistive heat in the event of lightning strikes. Research on polymeric lightning strike protection has gained momentum in the past few years. Researchers have studied various conductive fillers to improve the CFRP performance against lightning strikes. Carbon nanotubes (CNTs) and graphene oxide (GO) have been studied as future lightning Strike Protection (LSP) materials the most. The use of CNT and GO-based composites has shown improved mechanical properties and improved electrical conductivity of the composites. Researchers investigated CNTs and GO as the fillers to the matrix system, sizing the carbon fibers and the surface coating on top of the CFRP surface. This chapter highlights the remarkable improvement in the lightning damage suppression of CNT and GO-based composites and their structural applications. Special attention is given to their potential use as LSP material in future aircraft.
Kumar, Vipin↗
Extraction of high-purity medium-chain-length polyhydroxyalkanoates via combined mechanical treatment and mild oxidation
Polyhydroxyalkanoates (PHAs) are a class of polyester polymers of microbial origin and considered biodegradable alternatives to conventional plastics. To make PHAs cost-competitive with synthetic plastics, their production cost, including extraction cost, should be significantly reduced. Herein, this study aimed to develop an effective extraction method based on combined mechanical disruption and chemical treatment for the recovery of high-purity medium-chain-length PHAs (mcl-PHAs) at a lower cost. mcl-PHAs-accumulating Pseudomonas strains were used for PHA extraction via high-pressure homogenization (HPH) coupled with surfactant treatment and mild alkaline hydrogen peroxide oxidation. The mechanical-chemical method was found to have strong synergy for PHA extraction while minimizing PHA depolymerization. The optimized condition resulted in nearly 90 % mcl-PHA recovery with high purity (>91 %). The extracted high-purity PHAs exhibited thermal and mechanical properties suitable for downstream applications entailing flexible and elastomeric materials.
42 ENGINEERING↗
Upcycling of Waste Plastics into Carboxylic Acids for Biodegradable Surfactants
This work outlines a process for producing high‐purity (>95%) carboxylate surfactants from post‐consumer recycled high‐density polyethylene (PCR‐HDPE). The approach involves the thermal depolymerization of PCR‐HDPE via pyrolysis, followed by fractional distillation to isolate C9–C14 olefins. These olefins undergo hydroformylation using cobalt carbonyl catalysts to generate aldehydes, which are subsequently oxidized to carboxylic acids using Pinnick oxidation under mild aqueous‐phase conditions. Neutralization of the resulting carboxylic acids with sodium hydroxide produces plastic‐derived carboxylate surfactants (PDCs) in the form of sodium carboxylates. Subsequent purification steps ensure surfactant‐grade purity and enable accurate assessment of physicochemical properties. The resulting PDCs are evaluated for critical micelle concentration (CMC), foamability, surface tension reduction, and calcium ion tolerance, demonstrating competitive behavior with conventional anionic carboxylate surfactants. This route provides a sustainable alternative for surfactant production, reducing reliance on fossil‐derived feedstocks and valorizing plastic waste streams through chemical upcycling.
Biodegradable surfactants↗
Advanced Materials and Manufacturing for Low-Cost, High-Performance Liquid Rocket Combustion Chambers
A document describes the low-cost manufacturing of C103 niobium alloy combustion chambers, and the use of a high-temperature, oxidation-resistant coating that is superior to the standard silicide coating. The manufacturing process involved low-temperature spray deposition of C103 on removable plastic mandrels produced by rapid prototyping. Thin, vapor-deposited platinum-indium coatings were shown to substantially improve oxidation resistance relative to the standard silicide coating. Development of different low-cost plastic thrust chamber mandrel materials and prototyping processes (selective laser sintering and stereolithography) yielded mandrels with good dimensional accuracy (within a couple of mils) for this stage of development. The feasibility of using the kinetic metallization cold-spray process for fabrication of free-standing C1O3 thrusters on removable plastic mandrels was also demonstrated. The ambient and elevated temperature mechanical properties of the material were shown to be reasonably good relative to conventionally processed C103, but the greatest potential benefit is that coldsprayed chambers require minimal post-process machining, resulting in substantially lower machining and material costs. The platinum-iridium coating was shown to provide greatly increased oxidation resistance over the silicide when evaluated through oxyacetylene torch testing to as high as 300 F (= 150 C). The iridium component minimizes reaction with the niobium alloy chamber at high temperatures, and provides the high-temperature oxidation resistance needed at the throat.
Williams, Brian E.↗
Understanding plasticity in irradiated alloys through TEM in situ compression pillar tests
Depth-sensing transmission electron microscopic (TEM) in situ mechanical testing has become widely utilized for understanding deformation in irradiated materials. Until now, compression pillars have primarily been used to study the elastic properties and yield of irradiated materials. In this study, we utilize TEM in situ compression pillars to investigate plastic deformation in two ion-irradiated alloys: Fe–9% Cr oxide dispersion strengthened (ODS) alloy and nanocrystalline Cu–24% Ta. We develop an algorithm to automate the extraction of instantaneous pillar dimensions from TEM videos, which we use to calculate true stress–strain curves and strain hardening exponents. True stress–strain curves reveal intermitted plastic flow in all specimen conditions. In the Fe–9% Cr ODS, intermitted plastic flow is linked to strain bursts observed in TEM videos. Low strain hardening or strain softening is observed in all specimen conditions. TEM videos link the strain softening in irradiated Fe–9% Cr ODS to dislocation cross-slip, and in Cu–24% Ta to grain boundary sliding.
36 MATERIALS SCIENCE↗
Li Morphology Evolution during Initial Cycles in a Gel Composite Polymer Electrolyte
Understanding and controlling lithium morphology evolution and lithium dendrite formation and growth during cycling is one of the key challenges for high-energy lithium metal batteries. This challenge applies to liquid electrolyte batteries as well as solid-state and semi-solid-state batteries. Our current knowledge about the evolution of the Li morphology is mostly obtained from liquid electrolyte-based studies in a Li–Li symmetrical cell configuration. The knowledge obtained in such conditions may not readily transfer into solid-state or semi-solid-state batteries. In this work, Li morphology evolution during initial cycling in a full cell configuration with the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC 622) cathode and a semi-solid-state gel composite electrolyte is monitored via post-mortem photographs and scanning electron microscopy at multiple length scales. The gel composite electrolyte contains a cross-linked poly(ethylene oxide)-based polymer electrolyte, ceramic fillers, and a liquid plasticizer. The results show that severe surface pitting occurs as early as the second stripping cycle. Pit formation and continuous dissolution during the stripping process are the main cause of the Li surface roughening and dendrite growth mechanism in the model gel composite electrolyte. Comparing Li dendrite growth mechanisms in liquid, polymer, and ceramic solid electrolytes, the dendrite growth mechanism observed in this model electrolyte resembles that of the liquid electrolyte the most. This study suggests that strategies to control Li morphology and prevent dendrite growth in a gel composite electrolyte should be similar to strategies applicable to liquid electrolytes.
25 ENERGY STORAGE↗
Dehydrogenated Polyethylene from Discarded Plastics as a Synthon for Functional Polyolefins
Many valuable specialty chemicals and drug candidates rely on synthesizing reactive intermediates to generate the final product(s). An approach that leverages C-H activation chemistry to achieve chemically active reactive handles for polymer diversification is desirable. Further, this report describes the synthesis and functionalization of dehydrogenated high-density polyethylene (HDPE) from discarded post-consumer plastic via acceptorless Ir-pincer-catalyzed non-oxidative dehydrogenation followed by acid-catalyzed hydroamination and hydroalkoxylation. The final products show significant material property changes with tunability and scalability through variation of the olefin content. This method highlights the potential value of dehydrogenated intermediates as platforms to enable carbon circularity and polyolefin end-of-life management strategies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Active Sites in a Heterogeneous Organometallic Catalyst for the Polymerization of Ethylene
Heterogeneous derivatives of catalysts developed by Ziegler and Natta are important for the industrial production of polyolefin plastics. However, the interaction between precatalysts, alkylaluminum activators, and oxide supports to form catalytically active materials is poorly understood. This is in contrast to homogeneous or well-defined heterogeneous catalysts that 20 contain resolved molecular structures that relate to activity and selectivity in polymerization reactions. This study describes the reactivity of triisobutylaluminum with high surface area aluminum oxide and a zirconocene precatalyst. Triisobutylaluminum reacts with the zirconocene precatalyst to form hydrides and passivates –OH sites on the alumina surface. The combination of passivated alumina and zirconium hydrides formed in this mixture generate ion-pairs that 25 polymerize ethylene.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗