Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Characterization of the astrophysical diffuse neutrino flux using starting track events in IceCube

In this article, a measurement of the diffuse astrophysical neutrino spectrum is presented using IceCube data collected from 2011-2022 (10.3 years). We developed novel detection techniques to search for events with a contained vertex and exiting track induced by muon neutrinos undergoing a charged-current interaction. Searching for these starting track events allows us to not only more effectively reject atmospheric muons but also atmospheric neutrino backgrounds in the southern sky, opening a new window to the sub-100 TeV astrophysical neutrino sky. The event selection is constructed using a dynamic starting track veto and machine learning algorithms. We use this data to measure the astrophysical diffuse flux as a single power law flux (SPL) with a best-fit spectral index of γ=2.58$_{-0.09}^{+0.10}$ and per-flavor normalization of $\phi$$_{per-flavor}^{Astro}$=1.68$_{-0.22}^{+0.19}$×10 -18 ×GeV -1 cm -2 s -1 sr -1 (at 100 TeV). The sensitive energy range for this dataset is 3-550 TeV under the SPL assumption. This data was also used to measure the flux under a broken power law, however we did not find any evidence of a low energy cutoff.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Signal processing and spectral modeling for the BeEST experiment

The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of 7 Be by precisely measuring the recoil energy of the 7 Li daughter. In Phase III, the BeEST experiment has been scaled from a singl superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase sensitivity and mitigate gamma-induced backgrounds. Phase III also uses a new continuous data acquisition system that greatly increases the flexibility for signal processing and data cleaning. Here, we have developed procedures for signal processing and spectral fitting that are sufficiently robust to be automated for large datasets. Furthermore, this article presents the optimized procedures before unblinding the majority of the Phase III dataset to search for physics beyond the standard model.

6 ≤ A ≤ 19↗
DOE OSTI2021

Time-resolved absorption spectroscopic characterization of ultrafast laser-produced plasmas under varying background pressures

Time-resolved tunable laser absorption spectroscopy is used to characterize the physical properties of ultrafast laser-produced plasmas. The plasmas were produced from an Inconel target, with = 0.4 wt. % Al, using ~ 35 fs, ~800 nm laser pulses at varying Ar background pressures from 1-100 Torr. The absorption spectrum of atomic Al is measured with high spectral and temporal resolution when the probe laser is stepped across the selected Al transition at 394.4 nm. Spectral fitting is used to infer linewidths, kinetic temperature, Al column density, and pressure broadening coefficient. The late time physical properties of plasmas are compared for various pressure levels. Our studies highlight that a significant lower state population exists even at early times of ultrafast laser-produced plasma evolution and lower state population persistence decreases with increasing ambient pressure. We also show that the fundamental optical properties, such as pressure-broadening, can be measured using ultrafast laser-produced plasmas combined with laser absorption spectroscopy.

laser absorption spectroscopy, laser produced plas↗
DOE OSTI2022

Raman spectroscopy of thermally perturbed carbon fibers: Discriminating spectral responses of modulus classes and defect types

The mechanical strength properties of carbon fibers are generally thought to be correlated with the presence of underlying atomic-level defects. These defects serve to break the underlying translational symmetry of the graphitic or graphene subunits of the fiber construction, resulting in the emergence of new Raman-active spectral features. However, historical attempts to classify the precise origin of defect contributions to the Raman spectra have been challenging because of indistinct and overlapping features in the carbon fiber Raman spectra. Further, while substantial research exists on high-temperature exposure in inert atmospheres for carbon fiber composites, comparatively less addresses microscale behaviors and Raman spectral alterations to monofilament carbon fibers exposed to high-temperature atmospheric environments. Here, we report Raman spectral responses of nine commercially available high-performance, polyacrylonitrile-based carbon fibers exposed to various atmospheric heat treatments. In this work, we introduce a model-independent characterization method, the integrated absolute difference, to quantify the spectral responses to heat treatment of different fiber modulus classes. We combine this new method with a newly reported strategy to standardize spectral fitting for carbon fibers. With this approach, we show that atomic-scale defects in the underlying fiber microstructure manifest in measurably distinct manners and have distinct responses to thermal perturbation. These combined approaches may lay the foundation for disentangling contributions from specific defects in the Raman spectra of carbon fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Combining Spectroscopic Techniques to Determine the Optical Constants of Powdered Lactose

A method for deriving the optical constants (n/k) of organic powdered materials using pressed pellets in the mid-infrared spectral range is introduced that combines variable angle spectroscopic ellipsometry and transmission spectroscopy. The approach is applied to lactose, in which three different forms of pellets were pressed and measured: A pure lactose pellet and a mixed lactose/KBr pellet with a large analyte percentage were used for ellipsometric measurements, and a KBr transmission pellet with only a small analyte percentage were used for transmission measurements. The transmission data provide an initial set of oscillators and improve the spectral fitting of weak absorption features (k<0.01). Ellipsometric data for the pure and mixed pellets are then fit simultaneously to derive the final n/k values for lactose from 6000-400 cm-1. An alternative method just using the ellipsometric data from the mixed pellet and the transmission data is also presented and shows good agreement with the multi-sample analysis, providing a simpler method for powders that do not press easily into pure pellets. Finally, the derived optical constants are used to model the reflectance data, demonstrating a good match with the measured reflectance spectra if non-idealities are included.

Yokosuk, Michael O.↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3c Raw Data

XPS after 0hr of chronoampometry. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from as-received Si/GaN sample, and deconvolution shows O - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3d Raw Data

XPS of Si/GaN photocathode after 1 hour chronoamperometry (CA) testing. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. X-ray photoemission spectroscopy (XPS) O1s core level spectra from 1 hour chronoamperometry (CA) tested Si/GaN sample, and deconvolution shows O - Ga bond, O - N - Ga bond, and OH - H2O bond.

photocathode↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3f Raw Data

XPS of Si/GaN photocathode after 10 hour chronoamperometry (CA) testing. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from 10 hours CA tested Si/GaN sample, and deconvolution shows O - Ga bond, O - N - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3e Raw Data

XPS of Si/GaN photocathode after 4 hour chronoamperometry (CA) testing. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from 4 hour CA tested Si/GaN sample, and deconvolution shows O - Ga bond, O - N - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2025

Frequency-Selectable Laser Source (FLS) Calibrator for CMB Bandpass Characterization

One of the biggest challenges for Cosmic Microwave Background (CMB) experiments comes from our detector bandpass calibration. Uncertainties in bandpass can severely limit our measurements by limiting foreground removal and spectral fitting, which is particularly important for high-$\ell$ observations like cluster science using the Sunyaev-Zeldovich (SZ) effect. Currently, CMB experiments typically use a Fourier Transform Spectrometer (FTS) to measure the detector bandpasses. However, the resolution of the FTS is dependent on the length of the interferometer arms, leading to a need for increasingly large FTS instruments as CMB experiments require tighter constraints on detector bandpasses. Additionally, systematic effects like shifts in bandpass shape from uneven illumination from the FTS further limit the calibration uncertainties. As a complement to the FTS, we have developed a Frequency-selectable Laser Source (FLS) calibrator, which uses a laser with adjustable frequency housed in a calibrator that allows for varying degrees of laser power attenuation. We present several tests used to characterize the first prototype design of the FLS calibrator, as well as the improvements to the calibrator design currently underway.

Saunders, Lauren [Fermilab]↗
DOE OSTI2025

Temperature Measurements in Hypersonic Wind Tunnels via Femtosecond Coherent Anti-Stokes Raman Scattering

A femtosecond coherent anti-Stokes Raman scattering (fs CARS) instrument is developed to perform gas-phase thermometry in cold-flow hypersonic wind tunnels. Measurements are reported for Mach 8 and 14 pure-nitrogen flows. The fs CARS instrument includes a 100 fs pump/Stokes pulse and a spectrally narrow probe pulse from a second harmonic bandwidth compressor. Important experimental considerations such as limits on the pump/Stokes pulse energy are discussed. The fs CARS focusing and collimating optics are mounted on a two-axis translation stage system to scan the measurement location during a 30 second wind tunnel run. Single-laser-shot rotational CARS spectra are recorded at the laser repetition rate of 1 kHz in the wind tunnel freestream and near simple cone models. Spectral fitting is used to determine quantitative gas temperatures. Freestream temperatures at Mach 8 and 14 spanned ranges of 40–75 and 35–50 K, respectively, depending on tunnel operating conditions. Temperature variations across the central 100 mm span of the wind tunnel were quantified. Measured temperature jumps across conical bow shocks from various models varied by less than 1% from predicted values. Hypersonic boundary layer measurements were demonstrated. In conclusion, these measurements illustrate the utility and robustness of this instrument for the study of complex fluid flow phenomena in challenging ground test facilities.

Aerodynamics↗
DOE OSTI2023

SIF and Vegetation Indices in the US Midwestern Agroecosystems, 2016-2021, Carbon Monitoring System (CMS)

This dataset contains half-hourly ground solar-induced chlorophyll fluorescence (SIF) and vegetation indices including NDVI, EVI, Red edge chlorophyll index, green chlorophyll index, and photochemical reflectance index at seven crop sites in Nebraska and Illinois for the period 2016-2021. Four sites were located at Eddy Covariance (EC) tower sites (sites US-Ne2, US-Ne3, US-UiB, and US-UiC), and three sites were located on private farms (sites Reifsteck, Rund, and Reinhart). The sites were either miscanthus, corn-soybean rotation or corn-corn-soybean rotation. The spectral data for SIF retrieval and hyperspectral reflectance for vegetation index calculation were collected by the FluoSpec2 system, installed near planting, and uninstalled after harvest to collect whole growing-season data. Raw nadir SIF at 760 nm from different algorithms (sFLD, 3FLD, iFLD, SFM) are included. SFM_nonlinear and SFM_linear represent the Spectral fitting method (SFM) with the assumption that fluorescence and reflectance change with wavelength non-linearly and linearly, respectively. Additional data include two SIF correction factors including calibration coefficient adjustment factor (f_cal_corr_QEPRO) and upscaling nadir SIF to eddy covariance footprint factor (ratio_EC footprint, SIF pixel), and measured FPAR from quantum sensors and Rededge NDVI calculated FPAR. The data are provided in comma-separated values (CSV) format.

Ameriflux↗
DOE OSTI2021

Host Star Metallicity of Directly Imaged Wide-orbit Planets: Implications for Planet Formation

Directly imaged planets (DIPs) are self-luminous companions of pre-main-sequence and young main-sequence stars. They reside in wider orbits (∼tens to thousands of astronomical units) and generally are more massive compared to the close-in (≲10 au) planets. Determining the host star properties of these outstretched planetary systems is important to understand and discern various planet formation and evolution scenarios. We present the stellar parameters and metallicity ([Fe/H]) for a subsample of 18 stars known to host planets discovered by the direct imaging technique. We retrieved the high-resolution spectra for these stars from public archives and used the synthetic spectral fitting technique and Bayesian analysis to determine the stellar properties in a uniform and consistent way. For eight sources, the metallicities are reported for the first time, while the results are consistent with the previous estimates for the other sources. Our analysis shows that metallicities of stars hosting DIPs are close to solar with a mean [Fe/H] = −0.04 ± 0.27 dex. The large scatter in metallicity suggests that a metal-rich environment may not be necessary to form massive planets at large orbital distances. We also find that the planet mass–host star metallicity relation for the directly imaged massive planets in wide orbits is very similar to that found for the well-studied population of short-period (≲1 yr) super-Jupiters and brown dwarfs around main-sequence stars.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterizing the X-Ray Emission of Intermediate-mass Pre-main-sequence Stars

We use X-ray and infrared observations to study the properties of three classes of young stars in the Carina Nebula: intermediate-mass (2–5 M {sub ⊙}) pre-main-sequence stars (IMPS; i.e., intermediate-mass T Tauri stars), late-B and A stars on the zero-age main sequence (AB), and lower-mass T Tauri stars (TTS). We divide our sources among these three subclassifications and further identify disk-bearing young stellar objects versus diskless sources with no detectable infrared (IR) excess emission using IR (1–8 μm) spectral energy distribution modeling. We then perform X-ray spectral fitting to determine the hydrogen-absorbing column density (N {sub H}), absorption-corrected X-ray luminosity (L {sub X}), and coronal plasma temperature (kT) for each source. We find that the X-ray spectra of both IMPS and TTS are characterized by similar kT and N {sub H}, and on average L {sub X}/L {sub bol} ~ 4 × 10{sup -4}. IMPS are systematically more luminous in X-rays (by ~0.3 dex) than all other subclassifications, with median L {sub X} = 2.5 × 10{sup 31} erg s{sup -1}, while AB stars of similar masses have X-ray emission consistent with TTS companions. These lines of evidence converge on a magnetocoronal flaring source for IMPS X-ray emission, a scaled-up version of the TTS emission mechanism. IMPS therefore provide powerful probes of isochronal ages for the first ~10 Myr in the evolution of a massive stellar population, because their intrinsic, coronal X-ray emission decays rapidly after they commence evolving along radiative tracks. We suggest that the most luminous (in both X-rays and IR) IMPS could be used to place empirical constraints on the location of the intermediate-mass stellar birth line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Wolf-Rayet Galaxies in SDSS-IV MaNGA. II. Metallicity Dependence of the High-mass Slope of the Stellar Initial Mass Function

As hosts of living high-mass stars, Wolf-Rayet (WR) regions or WR galaxies are ideal objects for constraining the high-mass end of the stellar initial mass function (IMF). We construct a large sample of 910 WR galaxies/regions that cover a wide range of stellar metallicity (from Z ~ 0.001 to 0.03) by combining three catalogs of WR galaxies/regions previously selected from the SDSS and SDSS-IV/MaNGA surveys. We measure the equivalent widths of the WR blue bump at ~4650 Å for each spectrum. They are compared with predictions from stellar evolutionary models Starburst99 and BPASS, with different IMF assumptions (high-mass slope α of the IMF ranging from 1.0 to 3.3). Both singular evolution and binary evolution are considered. We also use a Bayesian inference code to perform full spectral fitting to WR spectra with stellar population spectra from BPASS as fitting templates. We then make a model selection among different α assumptions based on Bayesian evidence. These analyses have consistently led to a positive correlation of the IMF high-mass slope α with stellar metallicity Z, i.e., with a steeper IMF (more bottom-heavy) at higher metallicities. Specifically, an IMF with α = 1.00 is preferred at the lowest metallicity (Z ~ 0.001), and an Salpeter or even steeper IMF is preferred at the highest metallicity (Z ~ 0.03). These conclusions hold even when binary population models are adopted.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

SDSS-IV MaNGA: How the Stellar Populations of Passive Central Galaxies Depend on Stellar and Halo Mass

We analyze spatially resolved and co-added SDSS-IV MaNGA spectra with signal-to-noise ratio ~100 from 2200 passive central galaxies (z ~ 0.05) to understand how central galaxy assembly depends on stellar mass (M*) and halo mass (M h ). We control for systematic errors in M h by employing a new group catalog from Tinker and the widely used Yang et al. catalog. At fixed M*, the strengths of several stellar absorption features vary systematically with M h . Completely model-free, this is one of the first indications that the stellar populations of centrals with identical M* are affected by the properties of their host halos. To interpret these variations, we applied full spectral fitting with the code alf. At fixed M*, centrals in more massive halos are older, show lower [Fe/H], and have higher [Mg/Fe] with 3.5σ confidence. We conclude that halos not only dictate how much M* galaxies assemble but also modulate their chemical enrichment histories. Turning to our analysis at fixed M h , high-M* centrals are older, show lower [Fe/H], and have higher [Mg/Fe] for M h > 10 12 h –1 M⊙ with confidence >4σ. While massive passive galaxies are thought to form early and rapidly, our results are among the first to distinguish these trends at fixed M h . They suggest that high-M* centrals experienced unique early formation histories, either through enhanced collapse and gas fueling or because their halos were early forming and highly concentrated, a possible signal of galaxy assembly bias.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Limits on X-Ray Polarization at the Core of Centaurus A as Observed with the Imaging X-Ray Polarimetry Explorer

We present measurements of the polarization of X-rays in the 2–8 keV band from the nucleus of the radio galaxy Centaurus A (Cen A), using a 100 ks observation from the Imaging X-ray Polarimetry Explorer (IXPE). Nearly simultaneous observations of Cen A were also taken with the Swift, NuSTAR, and INTEGRAL observatories. No statistically significant degree of polarization is detected with IXPE. These observations have a minimum detectable polarization at 99% confidence (MDP 99 ) of 6.5% using a weighted, spectral model-independent calculation in the 2–8 keV band. The polarization angle ψ is consequently unconstrained. Spectral fitting across three orders of magnitude in X-ray energy (0.3–400 keV) demonstrates that the SED of Cen A is well described by a simple power law with moderate intrinsic absorption (N H ~ 10 23 cm -2 ) and a Fe Kα emission line, although a second unabsorbed power law is required to account for the observed spectrum at energies below 2 keV. This spectrum suggests that the reprocessing material responsible for this emission line is optically thin and distant from the central black hole. Our upper limits on the X-ray polarization are consistent with the predictions of Compton scattering, although the specific seed photon population responsible for the production of the X-rays cannot be identified. The low polarization degree, variability in the core emission, and the relative lack of variability in the Fe Kα emission line support a picture where electrons are accelerated in a region of highly disordered magnetic fields surrounding the innermost jet.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

SDSS-IV MaNGA: The Effect of Stellar Mass and Halo Mass on the Assembly Histories of Satellite Galaxies

We combine an unprecedented MaNGA sample of over 3000 passive galaxies in the stellar mass range 10 9 –10 12 M ⊙ with the Sloan Digital Sky Survey group catalog by Tinker to quantify how central and satellite formation, quantified by radial profiles in stellar age, [Fe/H], and [Mg/Fe], depends on the stellar mass of the galaxy (M * ) and the mass of the host halo (M h ). After controlling for M * and M h , the stacked spectra of centrals and satellites beyond the effective radius (r e ) show small, yet significant differences in multiple spectral features at the 1% level. According to spectral fitting with the code alf , a primary driver of these differences appears to be [Mg/Fe] variations, suggesting that stellar populations in the outskirts of satellites formed more rapidly than the outer populations of centrals. To probe the physical mechanisms that may be responsible for this signal, we examined how satellite stellar populations depend on M h . We find that satellites in high-M h halos show older stellar ages, lower [Fe/H], and higher [Mg/Fe] compared to satellites in low-M h halos, especially for M * = 10 9.5 –10 10.5 M ⊙ . These signals lend support to environmentally driven processes that quench satellite galaxies, although variations in the merger histories of central and satellite galaxies also emerge as a viable explanation.

79 ASTRONOMY AND ASTROPHYSICS↗