Search NASA⌕ Search

SEARCH · Search NASA

Results for “subcontracting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Demonstrated Low Pressure Loss Inlet and Low Equivalence Ratio Operation of a Rotating Detonation Engine (RDE) for Power Generation

Presentation. An Aerojet Rocketdyne (AR) program was funded by the National Energy Technology Laboratory (NETL), part of the U.S. Department of Energy, to evaluate the benefits of an RDE in a turbine power plant system. Aerojet Rocketdyne subcontracted a variety of support for the program with efforts in modeling, diagnostic techniques, and test campaigns. Over the span of the program more than 700 hot fire tests were conducted at 4 facilities with 7 RDE assemblies. This presentation will cover results from the final test campaign conducted by Aerojet Rocketdyne.

03 NATURAL GAS↗
DOE OSTI2021

Bat Survey for the Lawrence Livermore National Laboratory Experimental Test Site 300

Pursuant to Subcontract Number B644180 between ECORP Consulting, Inc. (ECORP) and Lawrence Livermore National Security, LLC. at Lawrence Livermore National Laboratory (LLNL), ECORP conducted focused bat surveys at LLNL’s Experimental Test Site (Site 300) during the spring of 2021. The surveys targeted two focal species including the Western red bat (Lasiurus blossevillii) and pallid bat (Antrozous pallidus) on the approximately 6,800-acre Site 300 in Alameda and San Joaquin Counties. The results of these surveys will provide supporting information for a Site-Wide Environmental Impact Statement.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Passerine Bird Surveys for the Lawrence Livermore National Laboratory Site 200

Pursuant to Subcontract Number B644180 between ECORP Consulting, Inc. (ECORP) and Lawrence Livermore National Security, LLC. (LLNS) at Lawrence Livermore National Laboratory (LLNL), ECORP conducted passerine bird and waterfowl surveys at LLNL Livermore Site 200 (Site 200) during the spring and summer of 2021. While the point-count surveys were considered passerine and waterfowl surveys, other non-passerine species (e.g. raptors, doves, woodpeckers, hummingbirds) were surveyed for as well. LLNL conducts annual monitoring for nesting raptors at the Livermore Site 200. Because of this, raptors were not included as target species in this scope of work. The purpose of the surveys was to document the presence and abundance of all avian species in support of a Site-wide Environmental Impact Statement. Particular focus of the survey was on special status bird species.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Avian Surveys Report for the Lawrence Livermore National Laboratory Arroyo Mocho Pumping Station

Pursuant to Subcontract Number B644180 between ECORP Consulting, Inc. and Lawrence Livermore National Security, LLC. at Lawrence Livermore National Laboratory (LLNL), ECORP conducted passerine bird and raptor surveys at the Arroyo Mocho pumping station site during the spring and summer of 2021. While the point-count survey was considered a passerine survey, other non-passerine species (e.g. doves, woodpeckers, hummingbirds) were surveyed for as well. The purpose of the surveys was to document the presence and abundance of all avian species within the survey area in support of a Site-wide Environmental Impact Statement. Particular focus of the survey was on special status bird species.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

SoW: Energy-Dependent Fission Product Yields

The purpose of this LLNL subcontract is to capitalize on our already established long-term relationship with Duke University and Triangle Universities Nuclear Laboratory (TUNL) to study fission observables like Fission Product Yields (FPY), fission cross-section and other data relevant to our programmatic needs. LLNL with Duke university partnership, wants to further develop new experimental capabilities to measure critical nuclear data important for LLNL stakeholders. The new FPY data will provide important benchmarks for nuclear theory and evaluation currently developed by the nuclear data and theory group. The improved FPY data is of interest to many major laboratory programs, including nuclear chemistry, nuclear forensics, safeguard, and nonproliferation communities. The impact of new FPY data, obtained by a graduate student from Duke (Aitor Bracho), will result in the U.S. Nuclear Data Program.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Does a Free Electron Laser Exhibit Non-Standard Statistics? [Slides and Report]

The originally proposed work under this award sought to develop a theoretical basis for previous experimental observations in free-electron laser (FEL) physics involving certain non-classical effects in the light produced by these devices. A sound and valid theoretical interpretation of these experiments would represent a transformational understanding of free-electron lasers, and of electron-photon interactions in general. The specific objective of the completed work, as described in the attached progress report by Jeongwan Park, was to perform a detailed analysis of an experiment by Chen and Madey (Physical Review Letters; volume 86 number 26, 2001) concerning the purported sub-Poissonian photon statistics in an FEL. Since that published work contradicted FEL theory as presently understood, the purpose of the work under the present subcontract was to obtain a better understanding of the quantum nature of the FEL, to investigate the possibility of theoretical and experimental evidence for the non-standard photon statistics of the FEL, and to critically examine the experimental evidence through a re-evaluation of the data analysis of Chen and Madey. The results of this study showed that there were numerous experimental conditions under which the observed photon statistics could be explained by combining both the photon clustering property and the dead-time effect, and consequently, that the observed photon statistics in the Chen-Madey experiment did not require sub-Poissonian photon statistics for their explanation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Geranium Photodiodes for Hard Xray Detection

This report summarizes the investigations engaged at UC Davis under subcontract B632083, as related to the LLNL-LDRD Project “High-Speed X-Ray Imager Arrays.” The first section entails work done within the Electrical and Computer Engineering (ECE) Department. The purpose of the work done so far is to understand photodiode design and which parameters are conducive to the design goals, which are: I: Maximize the detector quantum efficiency. The device must have a quantum efficiency of roughly 5% at 80 keV. II: Minimize temporal response. Collection time is limited to 1ns. All charge must be collected in that time. III: Minimize dark current. In this document, various photodiode parameters and designs are explored, and their impact on these goals are tabulated. In addition to these, various instruments that have been constructed for either testing these parameters or helping teammates with their experiments. The second section entails work done with the Materials Science Engineering (MSE) Department. In accordance with the proposed development of the germanium ROIC backside imagers, a critical step in the micromachining of these devices was the removal of the substrate on which the PIN junctions were epitaxially grown. A common technique for the micromachining of silicon wafers is the use of chemical etching alongside an “etch-stop” layer. In this technique, a chemical etchant will remove material until it reaches the etch-stop layer, at which the etch rate will drop significantly. This high selectivity (ratio of etch rates) allows any unevenness in the initial etching to be effectively smoothed away in the event that part of the wafer surface reaches the etch-stop layer sooner than another. An initial literature review found a paper by Divan et al. in which the authors used ion implantation to dope germanium wafers and achieve selectivity on the order of 100, sufficient for a reliable etch-stop.

42 ENGINEERING↗
DOE OSTI2021

Quantitative Performance Assessment of Proxy Apps and Parents (Report for ECP Proxy App Project Milestone ADCD-504-11)

The ECP Proxy Application Project has an annual milestone to assess the state of ECP proxy applications. Our FY21 milestone (ADCD-504-11) proposed to: "Assess the performance and fidelity of proxy applications, including those in the ECP Proxy App Suite, relative to the ECP Application workload on heterogeneous platforms. Use proxy applications and selected ECP applications to assess the utility of critical elements of the Exascale toolchain, especially tools used to collect performance data. Identify gaps in coverage and/or common situations in which proxies may fail to adequately represent ECP applications." To satisfy this milestone, the following specific tasks were completed: Study ability of MACSio to represent I/O workloads of adaptive mesh codes; Prepare report on assessed performance and debugging tools; Perform cosine similarity study on Intel and P9 and submit paper; Complete LDMS/GPU subcontract, complete and receive report; Complete validation of LDMS data collection for GPUs and submit paper; and Perform cosine similarity study on GPUs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Herpetological Survey for the Lawrence Livermore National Laboratory Site 300

Pursuant to Subcontract Number B644180 between ECORP Consulting, Inc. (ECORP) and Lawrence Livermore National Security, LLC. (LLNS) at Lawrence Livermore National Laboratory (LLNL), ECORP conducted focused herpetological surveys at LLNL’s Experimental Test Site (Site 300) during the spring of 2021. The results of these surveys will provide supporting information for a Site-wide Environmental Impact Statement (SWEIS). The herpetological surveys targeted three special-status reptile species including Blainville’s (coast) Horned Lizard (Phrynosoma blainvillii), Northern California Legless Lizard (Anniella pulchra), and San Joaquin Coachwhip (Masticophis flagellum ruddocki) on the approximately 6,800-acre Site 300 in Alameda and San Joaquin counties. Special-status amphibian species were not targets of this survey effort.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mixed Precision Numerical Linear Algebra (Final Report)

The objective of this subcontract was to identify opportunities for the use of mixed precision within iterative solvers and to explore these opportunities both theoretically and experimentally. All quarterly milestones were achieved. We summarize the achievements each quarter in this report.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Front-End Engineering Design for Piperazine with the Advanced Stripper

This Department of Energy (DOE) funded project was executed with the goal of preparing a Front-End Engineering Design (FEED) for the capture and compression of 90% of the CO2 that would normally be emitted from an existing natural gas combined cycle (NGCC) plant. The FEED focused on the application of the piperazine advanced stripper (PZAS) process at Mustang Station of the Golden Spread Electric Cooperative (GSEC), which consists of two gas turbines with common heat recovery steam generator (HRSG). The University of Texas at Austin (UT) served as the prime contractor, and subcontracted AECOM Technical Services and Trimeric Corporation to support FEED development. This project team has worked together to advance PZAS for more than a decade. ExxonMobil, Chevron, and Total provided project co-funding. The objectives of this work included: 1. To advance engineering design such that a comprehensive estimate for the total installed cost of a full-scale PZAS CO2 Capture Plant with CO2 compression can be developed on an existing NGCC power plant. a. These detailed costs can also be used to qualify PZAS and other related second generation (2G) amine scrubbing processes for use on cogeneration facilities in refineries and chemical plants that use gas turbines with HRSGs to produce steam. b. These detailed costs will help qualify 2G amine scrubbing for use on NGCC power plants and establish a more accurate baseline cost to be used as a target by other capture technologies. 2. To provide cost details to be used in the economic optimization of the process features of PZAS and other 2G amine scrubbing processes. 3. To provide DOE with a more detailed understanding of carbon capture costs in a commercial application, enabling DOE to better design its R&D program to improve the economics for carbon capture. 4. To provide the host site and cost share partners with the information necessary to determine whether a commercial project to capture and use CO2 for enhanced oil recovery (EOR) or for sequestration can be justified (when accounting for the 45Q tax credit). A key component of the FEED is the estimated total installed cost, which provides a basis for the likely capital investment necessary to implement the PZAS carbon capture process at this location and scale. In combination with the included economic analysis, which accounts for potential revenue from the produced CO2, potential avenues to profitability are explored. The major findings of the FEED are as follows: The Mustang Station PZAS CO2 Capture Plant estimated total project cost of $698 MM of which $384 MM was direct costs. The annual operating costs were $32.6 MM. The total investment for a PZAS facility at Mustang Station is $725 MM. This estimate includes owner’s cost of $25 million and a contingency of $110 MM. • The study estimated the CO2 capture plant at Mustang Station would generate CO2 at $110/tonne for EOR, assuming a 12% IRR (internal rate of return) and an 85% capacity factor. For CO2 storage, the same case would achieve a 12% IRR at about $114/tonne. At a capacity factor of 52%, the storage and EOR cases would break even when carbon is priced ~$150/tonne. The economic analysis determined that the capacity factor and utility pricing, among other variable factors, had a significant effect on the economics and will need additional studied. • The energy penalty of the PZAS plant would be about 46 MW in connected power and 35 MW in operating load. The natural gas requirement (for the Gas Boiler package) would be about 354 MMBTU/hr. • The FEED revealed no major risks in process maturity. However, some areas were outlined for further engineering during detailed design, which included the Gas Boiler system, general arrangement and site layout, air coolers, schedule development, and optimization of the process for higher CO2 removal. • If PZAS were to be implemented at another host site, additional opportunities for cost reduction for would include cost reduction through use of cooling water and steam extraction.

03 NATURAL GAS↗
DOE OSTI2022

Geothermal Fault Zone and Fluid Imaging through Joint Airborne ZTEM and Ground MT Data Inversion Analysis

This project has aimed to achieve detailed electrical resistivity resolution at geothermal reservoir scales by combining airborne natural electromagnetic (EM) field surveying (ZTEM) with ground magnetotelluric (MT) measurements to approximate an airborne MT geophysical method. MT alone is relatively expensive and may have permitting challenges in sensitive areas. Airborne ZTEM field data contains only the magnetic field, requires a background assumption, and has been limited to relatively high frequencies, thus suffering uniqueness problems. Based on proto-type 2D simulations, ZTEM ambiguities may be reduced through formal incorporation with possibly sparse ground MT soundings, which we pursued in full 3D for this project. The methodology was tested at the high-temperature Roosevelt Hot Springs geothermal system, Utah, which was considered advantageous given the near total exposure of crystalline reservoir rocks across the project area. ZTEM and ground MT survey data were acquired in 2017, subcontracted to outside parties with which we have worked in the past. These included 80 remote-referenced tensor MT soundings over the Mineral Mountains and adjacent Roosevelt Hot Spring producing geothermal system. These MT stations abut later coverage of a similar number of MT stations taken for the Utah FORGE project providing excellent total data aperture to re-solve structure beneath both project areas better than either set alone. The airborne ZTEM survey covered 704 line kilometers in E-W flight lines with a 250 m line spacing. Although this survey was timed during a maintenance-related shutdown of power production at the Roosevelt Hot Springs, other noise sources difficult to identify but including two high-voltage state-scale transmission lines compromised the ZTEM survey badly leading to unusable responses. Thus, with DOE management concurrence, the project proceeded to emphasize inversion and interpretation of the joint SubTER-FORGE MT data sets with regard to the Roosevelt Hot Springs reservoir recharge and to deep heat sources for both it and the Utah FORGE EGS project area. We also investigated the joint ZTEM-MT sampling concept with data sets from the Eleven Mile Canyon prospect area donated by the U.S. Navy (A. Sabin, PoC). Inversion of the SubTER-FORGE MT data using the HexMT 3D finite element algorithm reveals a large, low-resistivity anomaly extending sub-vertically through the depth range of the crust beneath the western Mineral Mountains. The steep conductive zone connects in the lower crust to a more tabular conductor characteristic of much of the Great Basin that generally is ascribed to current mafic magmatic underplating, hybridization and fluid release. The location of the resolved anomaly relative to the recent (0.5-0.8 Ma) eruptive centers of the Mineral Mountains implicates it as remnants of the magma body which fed these centers. This structure appears to be currently feeding heat and fluids upward into the Roosevelt Hot Springs hydrothermal system, as well as heat laterally to the FORGE project area. Separate and joint inversion models were carried out for the donated Eleven Mile Canyon MT-ZTEM data set to demonstrate concept. ZTEM only inversion showed two main alteration zones in the western portion of the project area known from geological mapping. Joint inversion including an E-W profile of MT soundings sharpened these features considerably. It also resolved in much greater detail the graben related normal faulting structure of the central project area which lies at depths exceeding the sensitivity of ZTEM alone. The sparse number of MT da-ta relative to the ZTEM required upweighting the former by a factor of several, but an exact procedure awaits future research. Our final impression is that sparse MT data can improve resolution of the subsurface over that of ZTEM alone. However, well sampled MT data are to be preferred and offer the simplicity of interpreting just one data type, and possess the superior resolution capability coming with the electric field everywhere, and from their high bandwidth.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

University Coalition for Fossil Fuel Energy Research

Following a nationwide open competition, the University Coalition for Fossil Energy Research (UCFER) was established in October 2015 through a cooperative agreement between Penn State and the Department of Energy (DOE) National Energy Technology Laboratory (NETL). Penn State lead UCFER with the objective of advancing basic and applied research for clean and low-carbon energy based on fossil fuels in support of the DOE’s mission. UCFER focused on research that improves the efficiency of production and use of fossil energy resources, while minimizing the environmental impacts and reducing greenhouse gas emissions. Penn State lead a team of nine universities (Massachusetts Institute of Technology, The Pennsylvania State University, Princeton University, Texas A&M University, University of Kentucky, University of Southern California, The University of Tulsa, University of Wyoming, and Virginia Polytechnic and State University) during the competition stage, adding seven more universities in 2017 (Carnegie Mellon University, Louisiana State University, The Ohio State University, University of North Dakota, University of Pittsburgh, University of Utah, and West Virginia University). This Coalition exhibited a wide geographical distribution across the U.S. bringing a wide variety of fossil energy expertise. This national university alliance was a major collaborative effort with NETL to address specific topics of R&D in NETL’s mission area, which involved one or more of NETL’s five core competencies (Geologic and Environmental Systems, Materials Engineering and Manufacturing, Energy Conversion Engineering, Systems Engineering and Analysis, and Computational Science and Engineering). The first five to six months of the project was the definitization stage. During this period, Penn State worked closely with NETL to finalize the Coalition organizational structure and By- Laws, prepare a statement of substantial involvement and a statement of project objectives, and develop operations and membership plans. A major component of this stage included preparing an execution plan to solicit research, evaluate proposals, recommend selected projects to NETL, and award projects. In addition, a plan was prepared to monitor projects, review projects, disseminate knowledge from research projects and develop an online system for Coalition research portfolio management. This included developing a website and several databases. The first of six rounds of solicitations started in mid-2016. Projects from the sixth solicitation started February 1, 2021, and ended January 31, 2023. Projects that were selected represented twelve technology lines. Approximately $16.6 million in funding was available for the six solicitations. Most of the funding was provided by DOE, Office of Fossil Energy (DOEFE) with the DOE Fuel Cells Technologies Office (DOE-FCTO) providing funding for a few projects. Coalition universities submitted 259 proposals in response to the solicitations, requesting approximately $67.0 million in funding, and forty-three projects were selected. However, one project withdrew after the principal investigator left the university. The management of the Coalition projects was a major activity by Penn State. Managing the Coalition projects consisted of monitoring the projects, reviewing the projects through annual technical review meetings, disseminating knowledge from the research projects, and developing an online system for Coalition research portfolio management. Penn State’s OMT monitored projects to ensure that all milestones (technical, schedule, budget) were met, expenditures were allowable, cost share (when applicable) were reported, and all technical reports were submitted. The OMT also posted the technical reports electronically on a secure members-only website for access and review by the Coalition members. Disseminating knowledge from the research projects was done through a website, newsletters, various meetings, conferences, journal articles, publicity/press releases, and project summaries that were prepared after each project was completed. Penn State kept NETL apprised of UCFER progress through quarterly reports (thirtyone were submitted by Penn State), verbal and written communications, yearly updates at the annual technical review meetings, and cost accrual reports. The UCFER project had a significant impacty. The UCFER program established the first national university alliance in fossil energy research with a major collaboration effort with DOE NETL that addressed specific topics in NETL’s research and development mission areas. It generated inter-university collaborations, which was another program interest. Twenty-two out of 259 proposals contained collaborations (≈8.5%) and three of forty-two funded projects involved inter-university collaborations (≈7.0%). The forty-two funded projects provided support at fourteen universities involving 269 personnel. Research was conducted by 106 faculty, 115 graduate and undergraduate students, forty-six research staff and post-doctoral scholars, and two visiting scholars. Students and post-doctoral scholars were also on-site at NETL through CRADAs. In addition, non-Coalition participants included six universities and sixteen companies and national laboratories. The non-Coalition participants were involved as subcontractors, providers of cost share, performed unpaid consultation and sample analysis, served as advisory board members, or were providers of samples and materials for testing. UCFER also produced visibility in that fifty-six refereed journal articles were published, fifty-seven conference papers and twenty-three posters were prepared, 190 presentations were given, eight patent applications were filed, two books/book chapters were written, and ten software codes were developed. Collaboration between NETL and the individual projects was a major requirement for all funded projects. This included NETL staff time to support collaboration, consultation, technical guidance, sample preparation and analysis, internships at NETL, on-site testing and equipment usage by Coalition participants at NETL, co-mentoring students, and coauthoring journal articles and conference papers. Collaboration was impacted by COVID-19 in that not all on-site activities could be performed. NETL personnel were coauthors on eight of the conference papers (fourteen percent of the conference papers that were prepared) and seventeen of the journal articles (thirty percent of the journal articles that were prepared). A website was developed for an online proposal solicitation and review process and to provide exposure to UCFER. A website analysis highlighted the large amount of member and general public interest in UCFER by interpreting access statistics from March 2016 through June 2023. Visitors to the site originated from many different organizations, businesses, and countries. The website provided a means to disseminate information to both the general public and the UCFER members and was successfully used for outreach activities. In addition, NETL required that RFP release, proposal submission, and proposal reviews all be performed online. Penn State successfully developed these capabilities in a secure section of the website, which were used throughout the UCFER project. It is recognized that each project had its technical successes. In addition, highlighted successes were compiled and summarized from the research projects. Information was requested from the PIs of completed projects. In addition, Penn State’s Operations Management Team reviewed subcontract reports to identify project successes. Examples of information requested from PIs included (not all-inclusive): new projects that have been funded as a result of UCFER funding; new commercial products; establishment of a new center; new patent; new software; best paper awards; highly-cited work; and graduate student successes. A total of forty-eight highlighted successes were reported.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Mixed Precision Numerical Linear Algebra (Final Report)

The objective of this subcontract was to identify opportunities for the use of mixed precision within iterative solvers and to explore these opportunities both theoretically and experimentally. All quarterly milestones were achieved. Quarterly achievements are summarized in sections.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Mixed Precision Numerical Linear Algebra (Final Report)

The objective of this subcontract was to identify opportunities for the use of mixed precision within iterative solvers and to explore these opportunities both theoretically and experimentally. All quarterly milestones were achieved. We summarize the achievements each quarter in sections below.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

NUCLEI (SciDAC-4) effort at The University of Tennessee, Knoxville

This Report summarizes the accomplishments of NUCLEI researchers at The University of Tennessee, Knoxville (UTK) and those supported via subcontracts at the University of North Carolina at Chapel Hill (UNC) and Iowa State University (ISU). The SciDAC-4 NUCLEI collaboration had the goal to advance the computation of atomic nuclei and to make reliable predictions including uncertainty estimates for observables of interest. These goals were achieved by developing improved nuclear interactions and currents that are input to the computations, and by advancing the algorithms and techniques used for computing nuclear observables of interest. The computed results advanced our understanding of how nuclei work; they helped to guide and interpret experiments at existing low-energy nuclear physics facilities, the Facility for Rare Isotope Beams, Jefferson Laboratory, and neutrino experiments. In addition, predictions were made that await confrontation with experimental results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗