Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal conductivities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Characterization of high thermal conductivity fuel surrogates before and after ion irradiation

High thermal conductivity nuclear fuels offer important potential advantages over traditional oxide-based fuels such as higher burnup, reduction in fission gas release, and better overall safety of the system. One proposed approach to high thermal conductivity fuels utilizes high thermal conductivity nonfissile additives with UO 2 fuel to lower the fuel operating temperature and thereby take advantage of the highly favorable radiation resistance of UO 2 at lower operating temperatures. However, differential swelling in the matrix and high conductivity additive phases during high dose irradiation could lead to internal cracking and poor performance. In the current study, ceria (CeO 2 ) and zirconia (ZrO 2 ) surrogate matrices were used to model UO2 behavior. Additives of 10 vol. % Al 2 O 3 or SiC in the form of short fibers or platelets were used for the high conductivity second phase. The nuclear fuel surrogates were sintered to achieve densities greater than 93% of the ideal values. Scanning electron microscopy (SEM) imaging and X-ray diffraction confirmed the uniform distribution of the second phase and that no intermetallic second phase was formed during sintering. The thermal conductivity of the sintered samples was measured from 50 °C to 900 °C and confirmed the desirable increase compared to pure CeO 2 /ZrO 2 pellets. Samples were irradiated with 20 MeV Ni 6+ ions at midrange doses ranging from 1 to 15 displacements per atom (dpa) and temperatures from 300 °C to 700 °C. Post irradiation characterization revealed a good stability of the samples at low to medium doses with matrix lattice parameter swelling of < 0.14 % but showed a significant microstructural deterioration and decrease of the mechanical properties at 15 dpa.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Experimental confirmation of first-principles thermal conductivity in Zirconium-doped ThO 2

The degradation of thermal conductivity in advanced nuclear fuels due to the accumulation of fission products and irradiation-induced defects is inevitable, and must be considered as part of safety and efficiency analyses of nuclear reactors. Here, this study examines the thermal conductivity of a zirconium-doped ThO 2 crystal, synthesized via the hydrothermal method using a spatial domain thermoreflectance technique. Zirconium is one of the soluble fission products in oxide fuels that can effectively scatter heat-carrying phonons in the crystalline lattice of fuel. Thus, thermal property measurements of zirconium-doped ThO 2 single crystals provide insights into the effects of substitutional zirconium doping, isolated from extrinsic factors such as grain boundary scattering. The experimental results are compared with first-principles calculations of the lattice thermal conductivity of ThO 2 , employing an iterative solution of the Peierls-Boltzmann transport equation. Additionally, the non-perturbative Green's function methodology is utilized to compute phonon-point defect scattering rates, accounting for local distortions around point defects, including mass difference changes, interatomic force constants, and structural relaxation. The congruence between the predicted results from first-principles calculations and the measured temperature-dependent thermal conductivity validates the computational methodology. Furthermore, the methodologies employed in this study enable systematic investigations of thermal conductivity reduction by fission products, potentially leading to the development of more accurate fuel performance codes.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Thermal conductivity of cement paste: Influence of macro-porosity

Thermal conductivity of cement paste is significantly influenced by the presence of macro-pores within it. These pores (pores with size greater than 6 μm, measured using microCT) which may be filled with air and/or water significantly alters the thermal conductivity of the resulting material. A combination of experiments, molecular dynamic investigations of major constituents of the cement paste, multiscale homogenization techniques, and inclusion of thermal conductivity of the pores containing either air or water has been utilized in this study to reveal the influence of pores in the calculation of thermal conductivity of the composite material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Yb Substitution and Ultralow Thermal Conductivity of the Ca 3– x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) System

Here, a series of Yb-substituted Zintl phases in the Ca 3–x Yb x AlSb 3 (0 ≤ x ≤ 0.81(1)) system has been synthesized by initial arc melting and post-heat treatment, and their isotypic crystal structures were characterized by both powder and single crystal X-ray diffraction analysis. All four title compounds adopted the Ca 3 AlAs 3 -type structure (space group Pnma, Pearson code oP28, Z = 4). The overall structure can be described as a combination of the 1-dimensional (1D) infinite chain of ∞ 1 [Al(Sb 2 Sb 2/2 )] formed by two vertices sharing [AlSb 4 ] tetrahedral moieties and three Ca 2+ /Yb 2+ mixed sites located in between these 1D chains. The charge balance and the resultant independency of the 1D chains in the title system were explained by the Zintl-Klemm formalism [Ca 2+ /Yb 2+ ] 3 [(4b-Al 1– )(1b-Sb 2– ) 2 (2b-Sb 1– ) 2/2 ]. A series of DFT calculations proved that (1) the band overlap between the d-orbital states from two types of cations and the p-orbital states from Sb at the high symmetry Γ point implied a heavily doped degenerate semiconducting behavior of the quaternary Ca 2 YbAlSb 3 model and (2) the site preference of Yb for the M1 site was due to the electronic-factor criterion based on the Q values of each atomic site. The electron localization function calculations also proved that the two different shapes of lone pairs of the Sb atoms—the “umbrella-shape” and the “C-shape”—are determined by local geometry and the coordination environment on the anionic frameworks. Thermoelectric measurements of the quaternary title compound Ca 2.19(1) Yb 0.81 AlSb 3 showed an approximately two times larger ZT value than that of ternary Ca 3 AlSb 3 at 623 K due to increased electrical conductivity and ultralow thermal conductivity originated from Yb substitution for Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High frequency atomic tunneling yields ultralow and glass-like thermal conductivity in chalcogenide single crystals

Crystalline solids exhibiting glass-like thermal conductivity have attracted substantial attention both for fundamental interest and applications such as thermoelectrics. In most crystals, the competition of phonon scattering by anharmonic interactions and crystalline imperfections leads to a non-monotonic trend of thermal conductivity with temperature. Defect-free crystals that exhibit the glassy trend of low thermal conductivity with a monotonic increase with temperature are desirable because they are intrinsically thermally insulating while retaining useful properties of perfect crystals. However, this behavior is rare, and its microscopic origin remains unclear. Here, we report the observation of ultralow and glass-like thermal conductivity in a hexagonal perovskite chalcogenide single crystal, BaTiS 3 , despite its highly symmetric and simple primitive cell. Elastic and inelastic scattering measurements reveal the quantum mechanical origin of this unusual trend. A two-level atomic tunneling system exists in a shallow double-well potential of the Ti atom and is of sufficiently high frequency to scatter heat-carrying phonons up to room temperature. While atomic tunneling has been invoked to explain the low-temperature thermal conductivity of solids for decades, our study establishes the presence of sub-THz frequency tunneling systems even in high-quality, electrically insulating single crystals, leading to anomalous transport properties well above cryogenic temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Lone-Electron-Pair Micelles Strengthen Bond Anharmonicity in MnPb16Sb14S38 Complex Sulfosalt Leading to Ultra-Low Thermal Conductivity

Designing crystalline solids in which intrinsic extremely low lattice thermal conductivity mainly arises from its unique bonding nature rather than structure complexity and/or atomic disorder could promote thermal energy manipulation and utilization for applications ranging from thermoelectric energy conversion to thermal barrier coatings. Here, we report an extremely low lattice thermal conductivity of ~0.34 W m-1 K-1 at 300 K in the new complex sulfosalt MnPb16Sb14S38. We attribute the ultra-low lattice thermal conductivity to a synergistic combination of scattering mechanisms involving (1) strong bond anharmonicity in various structural building units, owing to the presence of stereoactive lone-electron-pair (LEP) micelles, and (2) phonon scattering at the interfaces between building units of increasing size and complexity. Remarkably, low-temperature heat capacity measurement revealed a Cp value of 0.206 J g-1 K-1 at T > 300 K, which is 22% lower than the Dulong-Petit value (0.274 J g-1 K-1). Further analysis of the Cp data and sound velocity (ν = 1834 m/s) measurement yielded Debye temperature values of 161 K and 187 K, respectively. Here, the resulting Grüneisen parameter, γ = 1.65, further supports strong bond anharmonicity as the dominant mechanism responsible for the observed extremely low lattice thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Suppressed Lone Pair Electrons Explain Unconventional Rise of Lattice Thermal Conductivity in Defective Crystalline Solids

Manipulating thermal properties of materials can be interpreted as the control of how vibrations of atoms (known as phonons) scatter in a crystal lattice. Compared to a perfect crystal, crystalline solids with defects are expected to have shorter phonon mean free paths caused by point defect scattering, leading to lower lattice thermal conductivities than those without defects. While this is true in many cases, alloying can increase the phonon mean free path in the Cd-doped AgSnSbSe 3 system to increase the lattice thermal conductivity from 0.65 to 1.05 W m –1 K –1 by replacing 18% of the Sb sites with Cd. It is found that the presence of lone pair electrons leads to the off-centering of cations from the centrosymmetric position of a cubic lattice. X-ray pair distribution function analysis reveals that this structural distortion is relieved when the electronic configuration of the dopant element cannot produce lone pair electrons. Furthermore, a decrease in the Grüneisen parameter with doping is experimentally confirmed, establishing a relationship between the stereochemical activity of lone pair electrons and the lattice anharmonicity. The observed “harmonic” behavior with doping suggests that lone pair electrons must be preserved to effectively suppress phonon transport in these systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Experimental investigation of thermal conductivity of high entropy ceramics

In this talk, we will present the experimental investigation of thermal conductivity of high entropy carbides (HEC) and borides (HEB) with different compositions. Thermal conductivity determines the capability of a material to transport thermal energy and is considered as one critical physical property, specially in the energy industry. Due to the presences of disordered cation sublattice, it is expected that thermal conductivity of high entropy ceramics is lower than the counterparts with simpler compositions, but the experimental studies are relatively few. Using laser-based spatial-domain and frequency-domain thermoreflectance technique, we measured thermal conductivity of HECs and HEBs in a temperature range from 77K to 773K. Furthermore, by focusing the laser using an objective lens, we were able to perform the thermal property mapping on samples with the spatial resolution of micrometer. Such measurements could reveal important microstructure information in a rapid and efficient way without using scanning electron microscopy. The high spatial resolution also enables thermal conductivity measurements on ion-irradiated HECs with the damage layer of merely 1.1µm. These measurements can provide valuable information to predict the performances of HECs and HEBs with different compositions and from different manufacturing processes, and in the extreme environments such as nuclear reactors.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Scattering of phonons by edge dislocation and thermal conductivity of nanocrystalline silicon

For this work, the temperature dependent thermal conductivity of nanocrystalline silicon with the grain size of 500 nm, 144 nm, and 76 nm, was calculated based on the intrinsic phonon properties using a first-principles-based method and recent analytical theory of phonon-dislocation scattering. The results demonstrate, in the nanocrystalline silicon, that the low temperature (T) limit of thermal conductivity is directly proportional to T 2 instead of the conventional Casimir limit of T 3 . Calculated frequency-dependent scattering rates also indicate regimes of dominant scattering mechanisms: frequency-independent boundary scattering dominates in the very low phonon frequency regime of less than 0.6 THz; frequency-dependent boundary scattering dominates in the intermediate phonon frequency regime between 0.6 and 6 THz; and Umklapp scattering dominates in the high phonon frequency regime beyond 6 THz. The thermal conductivity is linear proportional to nanograin size in the region of d < 100nm and it shows independence at d > 1μm. This work proves the importance of dislocation-phonon scattering to thermal conductivity when the size of nanograins is small or at low temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bimodal particle distributions with increased thermal conductivity for solid particles as heat transfer media and storage materials

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in a variety of advanced power generation systems, particularly in concentrated solar power plants. The downside of such an approach is the low overall heat transfer coefficients caused by the inherently low thermal conductivity values of the low-cost solid media when coupled to heat exchanger for the power cycle working fluid. Choosing the right particle size distribution, emittance, and material of the solid media can all make a substantial difference in packed bed thermal conductivity. Current research though exclusively focuses on continuous unimodal distributions of particles. Here, in this work, we propose the use of a binary particle system with a bimodal size distribution to significantly increase packed bed thermal conductivity by reducing packed bed porosity. This is the first study related to ceramic solid particle heat transfer that has considered the thermal conductivity of non-unimodal size distributions at room and elevated temperatures. The following study found that for the binary particle system using Carbo particles CP 16/30 – CP 70/140 where the large particle volume fraction was 50% there was an 17–47% increase in packed bed thermal conductivity when compared with a nearly unimodal particle size distribution of CP 16/30 between 50 and 300 °C. Two different porosity and effective thermal conductivity models were studied, with one providing better prediction of porosity but both effective thermal conductivity models providing less predictive capacity. Importantly this approach can have a substantial impact of thermal performance, with little to no impact on the particle cost.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomistic insights into the synergistic effects of tensile strain and hydroxyl group on increasing the thermal conductivity of monohydric alcohols as latent heat storage materials

The low thermal conductivity of linear monohydric alcohols significantly limits their performance when used as latent heat storage materials. It was found that imposing certain mechanical strains on nanomaterials with highly ordered structures can lead to appreciable thermal conductivity enhancement. To explore the potential of enhancing the intrinsic thermal conductivity of monohydric alcohols, a simplified ideal crystal model was employed for molecular arrangement in this work. The variation of atomistic heat transfer as a function of tensile strains was exploited by non-equilibrium molecular dynamics simulations. Furthermore, the influence of stretching on the vibration density of states and the corresponding molecular morphology were revealed. The results suggested that the thermal conductivity of monohydric alcohols with such simplified ideal crystalline structures can increase by about 170 % at the strain of 0.1. The distance between neighboring interfaces was found to determine the energy of inter-molecular interactions at the crystal grain boundaries. The hydrogen bonds energy has not reached the critical value when increasing tensile strains from 0 to 0.1. In contrast, the strongest van der Walls interactions for alkanes were obtained at the strain of 0.06 where the interfacial distances of alkanes have achieved their equilibrium distances. In addition, the interfacial heat transfer coefficient of ideal crystal monohydric alcohols at hydroxyl interfaces was found to be threefold than that between methyl interfaces, in consistent with the strength of inter-molecular interactions between functional groups at the interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dominant effect of anharmonicity on the equation of state and thermal conductivity of MgO under extreme conditions

Understanding heat transfer in the earth mantle region is of great scientific interest but highly challenging due to dissimilar conditions from our daily lives. Thermal conductivity of highly pressured and thermally activated materials can be completely different from that at ambient condition. In this study we calculate the equation of state and thermal conductivity of cubic crystalline MgO, a major component of the mantle, in such an environment. It is shown that the material properties are not accurately captured unless rigorous treatment of anharmonicity of phonon vibrational motion is explicitly applied. To predict renormalized phonon dispersion relations, interatomic force constants of high-order expansion are required, especially at elevated temperature. The anharmonicity plays an increasingly substantial role for regulating volume expansion as temperature rises, because the Gibbs free energy of MgO considerably deviates from what was predicted by the quasiharmonic approximation. We find that the lattice thermal conductivity of MgO and the heat transfer of the earth's mantle are reliably estimated only when both the temperature-dependent renormalization of phonon frequencies and four-phonon scattering effects are taken into consideration. We map the characteristics at Geotherm into contour diagrams in which equilibrium volumes and the thermal conductivities are described as functions of temperature and pressure. Furthermore, the thermal conductivity values of MgO in this study are smaller than those in previous theoretical studies due to the additional incorporation of four-phonon scatterings in the calculations. Specifically, deviation between the values in previous studies and in this study becomes larger as thermodynamic variables reach those near the core-mantle boundary. For instance, thermal conductivities of 52.15 and 23.67 Wm -1 K -1 are estimated at ambient and extreme conditions (T = 4000K and P = 135 GPa), respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Suppressed thermal conductivity in hyperstoichiometric uranium dioxide controlled by phonon lifetimes

Thermal transport in nuclear fuels used for nuclear energy applications is directly tied to performance and reliability. Uranium dioxide (UO 2 ), one of the most important nuclear fuels, can accumulate excess oxygen atoms as interstitial defects, which significantly impacts thermal transport properties. In this study, thermal conductivities and inelastic neutron scattering (INS) measurements on UO 2+ x were performed at low temperatures (2–300K). The thermal conductivity of UO 2+ x (x = 0, 0.03, 0.04, and 0.11) is significantly suppressed compared to UO 2 except near the Néel temperature T N = 30.8 K, where it is independent of x. INS measurements demonstrate that the heat capacities and phonon group velocities of UO 2 and UO 2.08 are similar, and the suppressed thermal conductivity results from smaller phonon lifetimes. These perceptions advance our understanding of thermal transport properties in advanced nuclear fuels and guide safe and economic utilization of nuclear energy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Investigation of the thermal conductivity of molten LiF-NaF-KF with experiments, theory, and equilibrium molecular dynamics

Molten salts are being proposed for numerous advanced energy applications, including advanced nuclear reactors, concentrating solar power plants, thermal energy storage, and fusion reactors. Accurate knowledge of the thermophysical properties of molten salts directly impact the performance of these energy systems and are essential for design and safety analyses. Thermal conductivity data for fluoride molten salts and mixtures are especially lacking. In this work, experimental measurements of thermal conductivity using the steady-state variable gap technique were performed on eutectic LiF-NaF-KF from 834 to 1195 K. The experiment accounts for radiative, convective, and conductive heat losses. In addition, theoretical and molecular dynamics models are used, from 750 K up to 1300 K, to estimate the thermal conductivity for comparison with the experimental results. The results of experiments show a weak negative deviation of thermal conductivity with temperature, unlike previous experimental results in the literature. The measured thermal conductivity magnitudes agree with the theoretical and molecular dynamics predictions, aside from the data above 1100 K, where heat losses and radiative errors are the most significant, having a 16% maximum deviation from theory. These experimental results provide new thermal conductivity data for the LiF-NaF-KF system and further validation of the predictive models. The theoretical model was used to map the composition and temperature dependent thermal conductivity of LiF-NaF-KF and the mapping’s deviation from a linear additivity estimation of thermal conductivity. Additionally, this mapping showed the highest deviations from linearity for KF-LiF rich mixtures and increasing deviation with temperature. Notably, the deviation from linearity near the LiF-NaF-KF eutectic composition was around 25%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural and thermal properties of ultralow thermal conductivity Ba 3 Cu 2 Sn 3 Se 10

The thermal properties of Ba 3 Cu 2 Sn 3 Se 10 were investigated by measurement of the thermal conductivity and heat capacity. The chemical bonding in this diamagnetic material was investigated using structural data from Rietveld refinement and calculated electron localization. This quaternary chalcogenide is monoclinic (P2 1 /c), has a large unit cell with 72 atoms in the primitive cell, and a high local coordination environment. Additionally, the Debye temperature (162 K) and average speed of sound (1666 m s -1 ) are relatively low with a very small electronic contribution to the heat capacity. Ultralow thermal conductivity (0.46 W m -1 K -1 at room temperature) is attributed to the relatively weak chemical bonding and intrinsic anharmonicity, in addition to a large unit cell. This work is part of the continuing effort to explore quaternary chalcogenides with intrinsically low thermal conductivity and identify the features that result in a low thermal conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phonon Olympics: Phonon property and lattice thermal conductivity benchmarking from open-source packages

Three widely used open-source packages for determining phonon properties and lattice thermal conductivities (ALAMODE, phono3py, and ShengBTE) are benchmarked by teams of expert users and the package developers. The phonons for Ge, RbBr, monolayer MoSe 2 , and AlN are modeled at zero temperature, and they scatter through three-phonon and phonon-isotope processes, with thermal conductivities obtained from the linearized Peierls–Boltzmann transport equation with input from density functional theory calculations. Over a wide range of temperatures, the thermal conductivities calculated by the teams fall within at most ±15% of their mean values for each of the four materials. The phonon frequencies, obtained from the harmonic force constants, do not show large differences between the calculations, indicating that the modal heat capacities and group velocities are not responsible for the thermal conductivity variations. It is the lifetimes associated with three-phonon scattering, obtained from the cubic force constants, that drive the variations. The many decisions required to calculate the cubic force constants (e.g., supercell size, atomic displacement, neighbor cutoff, and application of symmetries) make identification of the precise origin of the thermal conductivity variations challenging. The calculated thermal conductivities do not generally show agreement with experimental measurements, which is attributed to the limitations of the density functional theory calculations. Guidance for the development of best practices is provided, which will help to standardize protocols needed for building thermal conductivity databases. The results provide a baseline for future benchmarking of other packages and more advanced calculations.

McGaughey, Alan J. H. [Carnegie Mellon Univ., Pitt↗
DOE OSTI2020

High spatial resolution thermal conductivity mapping of SiC/SiC composites

Herein, silicon carbide (SiC) ceramic matrix composites are being investigated as a new generation of fuel cladding materials due to its higher accident tolerance compared to Zircaloy. Characterization of the thermal conductivity of SiC constituents and their interfaces and interphases in SiC/SiC composites is needed as inputs to models of cladding performance. We used time-domain thermoreflectance (TDTR) to map the thermal conductivity with a spatial resolution of 2 µm. The SiC/SiC composite is comprised of Hi-Nicalon Type S fibers in a matrix made by chemical vapor infiltration (CVI matrix). The interphase material is a pyrolytic carbon/SiC multilayer. We report thermal conductivity maps of the SiC fiber and SiC matrix at temperatures of 25 °C, 90 °C, 164 °C, and 250 °C. The fiber has a uniform and isotropic thermal conductivity of 22 W m -1 K -1 at 25 °C; the thermal conductivity of fiber is approximately independent of temperature. The matrix thermal conductivity is not uniform and varies from 50 to 120 W m -1 K -1 at 25 °C; the thermal conductivity of the matrix scales approximately with the inverse of the square root of temperature, i.e., ∝ 1/T 1/2 . The thermal conductivity of the interphase at room temperature is 6 W m -1 K -1 . The calculated spatially averaged thermal conductivity of this SiC/SiC composite at 1000°C is 29 W m -1 K -1 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Implementation of an Experimental Setup Based on the Three-Omega Method for Thermal Conductivity Measurements of Molten Salts

Molten salt reactors (MSRs) are one of the most promising next-generation nuclear reactor designs which use molten salts as the fuel and coolant. To design, model, predict, license, and operate MSRs, the behavior of the fuel and coolant must be understood as a function of temperature and irradiation, i.e., burnup. Of particular importance and complexity is the reliable and reproducible measurement of thermal conductivity of molten salts at high temperatures (> 500 °C). Thermal conductivity provides information on the rate at which heat passes through a specified material and is dependent on chemical composition. Currently, in the national laboratory complex, several methods for measuring thermal conductivity on molten salt systems are under development, however, to date, consistent data have not been produced. Typically, thermal conductivity measurements of high-temperature melts have been conducted by using the Transient Hot Wire (THW) method where thermal conductivity is determined by the change in temperature over time at a certain distance from a heating wire. Another time-dependent technique is the laser flash method, commonly used for solid samples. Laser flash requires prior measurements of density and heat capacity to calculate the thermal conductivity of the sample, introducing additional measurement errors. Steady state and time-dependent measurements such as THW and laser flash have errors from convection and ambient temperature fluctuations (heat radiation). In order to produce high fidelity thermal conductivity data, a measurement technique needs to be developed that will reduce the effect of convection at high temperatures by measuring in a very fast time window. In addition, to measure on actinide and irradiated salts the sample size should be small. Therefore, this project aims to develop a frequency-domain technique based on the three-omega (3?) method, previously proven to work on solids, nanofluids and low temperature solar salts (25 to 250 °C). If the 3?-device can be designed with materials that can withstand high temperatures (>500 °C) and can be configured to reduce errors due to convection, then it would prove to be a valuable technique for ensuring thermal conductivity on molten salt systems needed for MSR development. For this proposal, the 3? instrument will be designed, assembled, and tested on non-radioactive salts before being used on actinide bearing salts. In addition, a thermal model will be developed to determine the thermal conductivity of the sample from the measured thermal oscillation of the sensor. Because 3? is a direct method that requires a small volume of sample and works in a very fast time window, it will aid in suppressing the interference due to convection which is ideal when working with high temperature liquid samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗