Search NASA⌕ Search

SEARCH · Search NASA

Results for “High order method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

A note on higher-order and nonlinear limiting approaches for continuously bounds-preserving discontinuous Galerkin methods

In Dzanic (2024), a limiting approach for high-order discontinuous Galerkin schemes was introduced which allowed for imposing constraints on the solution continuously (i.e., everywhere within the element). While exact for linear constraint functionals, this approach only imposed a sufficient (but not the minimum necessary) amount of limiting for nonlinear constraint functionals. This short note shows how this limiting approach can be extended to allow exactness for general nonlinear quasiconcave constraint functionals through a nonlinear limiting procedure, reducing unnecessary numerical dissipation. Finally, some examples are shown for nonlinear pressure and entropy constraints in the compressible gas dynamics equations, where both analytic and iterative approaches are used.

97 MATHEMATICS AND COMPUTING↗

High-order wide-band frequency domain identification using composite curve fitting

A method is presented for curve fitting nonparametric frequency domain data so as to identify a parametric model composed of two models in parallel, where each model has dynamics in a specified portion of the frequency band. This decomposition overcomes the problem of numerical sensitivity since lower order polynomials can be used compared to existing methods which estimate the model as a single entity. Consequently, composite curve fitting is useful for frequency domain identification of high-order systems and/or systems whose dynamics are spread over a large bandwidth. The approach can be extended to identify an arbitrary number of parallel subsystems in specified frequency regimes.

Bayard, D. S.↗

Evaluation of Higher-order Quadrature Schemes in Improving Computational Efficiency for Orientation-averaged Single-Scattering Properties of Nonspherical Ice Particles

We evaluate several high-order quadrature schemes for accuracy and efficacy in obtaining orientation-averaged single-scattering properties (SSPs). We use the highly efficient MIDAS to perform electromagnetic scattering calculations to evaluate the gain in efficiency from these schemes. MIDAS is shown to be superior to DDSCAT, a popular discrete dipole approximation (DDA) method. This study is motivated by the fact that quality physical precipitation retrievals rely on using accurate orientation-averaged SSPs derived from realistic hydrometeors as input to radiative transfer Models (RTMs). The DDA has been a popular choice for single-scattering calculations, due to its versatility with respect to target geometry. However, being iterative-solver-based (ISB), the most used DDA codes, e.g. DDSCAT and ADDA, must solve the scattering problem for each orientation of the target separately. As the size parameter and geometric anisotropy of the hydrometeor increase, the number of orientations needed to obtain accurate orientation-averages can increase drastically and so does the computation cost incurred by the ISB-DDA methods. MIDAS is a Direct-Solver-Based (DSB) code, its decomposition of the original large matrix with a high rank into multiple more manageable smaller matrices of lower ranks makes it much more computationally efficient while maintaining excellent accuracy. In addition, direct solvers consider all requested orientations at once, giving MIDAS further advantage over popular ISB-DDA methods. MIDAS, when combined with high-order quadrature for orientation averaging, can be greater than three orders of magnitude more efficient in obtaining RTM-ready SSPs of complex-shaped hydrometeors than existing ISB-DDA methods, with the native quadrature schemes they offer.

Ines Fenni↗

A hierarchy for modeling high speed propulsion systems

General research efforts on reduced order propulsion models for control systems design are overviewed. Methods for modeling high speed propulsion systems are discussed including internal flow propulsion systems that do not contain rotating machinery, such as inlets, ramjets, and scramjets. The discussion is separated into four areas: (1) computational fluid dynamics models for the entire nonlinear system or high order nonlinear models; (2) high order linearized models derived from fundamental physics; (3) low order linear models obtained from the other high order models; and (4) low order nonlinear models (order here refers to the number of dynamic states). Included in the discussion are any special considerations based on the relevant control system designs. The methods discussed are for the quasi-one-dimensional Euler equations of gasdynamic flow. The essential nonlinear features represented are large amplitude nonlinear waves, including moving normal shocks, hammershocks, simple subsonic combustion via heat addition, temperature dependent gases, detonations, and thermal choking. The report also contains a comprehensive list of papers and theses generated by this grant.

Hartley, Tom T.↗

Band-like Charge Photogeneration at a Crystalline Organic Donor/Acceptor Interface

Organic photovoltaic cells possess desirable practical characteristics, such as the potential for low-cost fabrication on flexible substrates, but they lag behind their inorganic counterparts in performance due in part to fundamental energy loss mechanisms, such as overcoming the charge transfer (CT) state binding energy when photogenerated charge is transferred across the donor/acceptor interface. However, recent work has suggested that crystalline interfaces can reduce this binding energy due to enhanced CT state delocalization. Solar cells based on rubrene and C 60 are investigated as an archetypal system because it allows the degree of crystallinity to be moldulated from a highly disordered to highly ordered system. Using a postdeposition annealing method to transform as-deposited amorphous rubrene thin films into ones that are highly crystalline, it is shown that the CT state of a highly crystalline rubrene/C 60 heterojunction undergoes extreme delocalization parallel to the interface leading to a band-like state that exhibits a linear Stark effect. This state parallels the direct charge formation of inorganic solar cells and reduces energetic losses by 220 meV compared with 12 other archetypal heterojunctions reported in the literature.

14 SOLAR ENERGY↗

Uniformly high order accurate essentially non-oscillatory schemes. III

In the present continuation of development and analysis efforts towards essentially nonoscillatory shock-capturing approximations of hyperbolic conservation laws, the Godunov (1959) scheme and its MUSCL second-order-accurate extension are generalized to an arbitrary order of accuracy by means of a hierarchy of uniformly high-order-accurate schemes. The design method, which involves the solution's essentially nonoscillatory piecewise polynomial reconstruction on the basis of its cell averages, followed by time-evolution through an approximate solution of the resulting initial value problem and its averaging over each cell, employs an adaptive stencil of grid points to yield schemes that are highly nonlinear.

Harten, Ami↗

Improved large perturbation propulsion models for control system design (1988-1989) and large perturbation models of high velocity propulsion systems (1989-1990) and reduced order propulsion models for control system design (1990-1991)

Methods for modeling high speed propulsion systems will be discussed. Included in this category are internal flow propulsion systems without rotating machinery, such as inlets, ramjets, and scramjets. Among the modeling topics discussed are modeling of linear isentropic flow, heat exchange, gasdynamics, lumped parameter systems, and infinite dimensional systems. Furthermore, a generalized overview of modeling high speed propulsion systems is presented in this collection of papers.

Hartley, Tom T.↗

Direct Numerical Simulations of Boundary Layer Transition on a Flat Plate

In recent years the techniques of computational fluid dynamics (CFD) have been used to compute flows associated with geometrically complex configurations. However, success in terms of accuracy and reliability has been limited to cases where the effects of turbulence and transition could be modeled in a straightforward manner. Even in simple flows, the accurate computation of skin friction and heat transfer using existing turbulence models has proved to be a difficult task, one that has required extensive fine-tuning of the turbulence models used. In more complex flows (for example, in turbomachinery flows in which vortices and wakes impinge on airfoil surfaces causing periodic transitions from laminar to turbulent flow) the development of a model that accounts for all scales of turbulence and predicts the onset of transition is an extremely difficult task. Fortunately, current trends in computing suggest that it may be possible to perform direct simulations of turbulence and transition at moderate Reynolds numbers in some complex cases in the near future. This presentation will focus on direct simulations of transition and turbulence using high-order accurate finite-difference methods. The advantage of the finite-difference approach over spectral methods is that complex geometries can be treated in a straightforward manner. Additionally, finite-difference techniques are the prevailing methods in existing application codes. An application of accurate finite-difference methods to direct simulations of transition and turbulence in a spatially evolving boundary layer subjected to high levels of freestream turbulence will be presented.

Rai, Man Mohan↗

Entropy–viscosity method for the single material Euler equations in Lagrangian frame

In this work, a new finite element method for solving the Euler equations in Lagrangian coordinates is proposed. The method is stabilized by adding artificial diffusion terms compatible with positivity of mass and internal energy, a minimum principle on the specific entropy, and all generalized entropy inequalities. Two options of first-order artificial diffusion are considered. One is in the spirit of the Eulerian based method (Guermond et al., 2011 [23, 22]; Zingan et al., 2013) and the other is similar to existing viscosity stabilizations in Lagrangian frame, e.g., Dobrev et al. (2012). The method is verified to be high-order for smooth solutions even with active viscosity terms. This is achieved by using high-order finite element spaces and an entropy-based viscosity stabilization that degenerates the first-order viscous terms. This stabilization automatically distinguishes smooth and singular regions. The formal accuracy and convergence properties of the proposed methods are tested on a series of benchmark problems. This is the first result extending the entropy–viscosity methodology to the Lagrangian hydrodynamics.

97 MATHEMATICS AND COMPUTING↗

Development of a Perfectly Matched Layer Technique for a Discontinuous-Galerkin Spectral-Element Method

The perfectly matched layer (PML) technique is developed in the context of a high- order spectral-element Discontinuous-Galerkin (DG) method. The technique is applied to a range of test cases and is shown to be superior compared to other approaches, such as those based on using characteristic boundary conditions and sponge layers, for treating the inflow and outflow boundaries of computational domains. In general, the PML technique improves the quality of the numerical results for simulations of practical flow configurations, but it also exhibits some instabilities for large perturbations. A preliminary analysis that attempts to understand the source of these instabilities is discussed.

Spectral-Element↗

A semi-intrusive deterministic approach to uncertainty quantification in non-linear fluid flow problems

This paper deals with the formulation of a semi-intrusive (SI) method allowing the computation of statistics of linear and non linear PDEs solutions. This method shows to be very efficient to deal with probability density function of whatsoever form, long-term integration and discontinuities in stochastic space. Given a stochastic PDE where randomness is defined on Ω, starting from (i) a description of the solution in term of a space variables, (ii) a numerical scheme defined for any event ω∈Ω and (iii) a (family) of random variables that may be correlated, the solution is numerically described by its conditional expectancies of point values or cell averages and its evaluation constructed from the deterministic scheme. One of the tools is a tessellation of the random space as in finite volume methods for the space variables. Then, using these conditional expectancies and the geometrical description of the tessellation, a piecewise polynomial approximation in the random variables is computed using a reconstruction method that is standard for high order finite volume space, except that the measure is no longer the standard Lebesgue measure but the probability measure. This reconstruction is then used to formulate a scheme on the numerical approximation of the solution from the deterministic scheme. This new approach is said semi-intrusive because it requires only a limited amount of modification in a deterministic solver to quantify uncertainty on the state when the solver includes uncertain variables. The effectiveness of this method is illustrated for a modified version of Kraichnan–Orszag three-mode problem where a discontinuous pdf is associated to the stochastic variable, and for a nozzle flow with shocks. The results have been analyzed in terms of accuracy and probability measure flexibility. Finally, the importance of the probabilistic reconstruction in the stochastic space is shown up on an example where the exact solution is computable, the viscous Burgers equation.

97 MATHEMATICS AND COMPUTING↗

Riverbed Temperature and 4D ERT Monitoring Reveals Heterogenous Horizontal and Vertical Groundwater-Surface Water Exchange Flows Under Dynamic Stage Conditions

Groundwater surface water exchange plays a critical role in physical, biological, and geochemical function of coastal and riverine systems. Observing exchange flow behavior in heterogeneous systems is a primary challenge, particularly when flows are governed by dynamic river stage or tidal variations. In this paper we demonstrate a novel application of time-lapse 3D electrical resistivity tomography and temperature monitoring where an array of thermistors installed beneath a riverbed double as resistivity electrodes. We use the array to monitor stage driven exchange flows over a 6-day period in a dynamic, stage-driven high order stream. We present a method for addressing the otherwise confounding effects of the moving river-surface boundary on the raw resistivity data, thereby enabling successful tomographic imaging. Temperature time-series at each thermistor location and time-lapse 3D images of changes in bulk electrical conductivity together provide a detailed description of exchange dynamics over a 10-meter by 45-meter section of the riverbed, to a depth of approximately 5 m. Results reveal highly variable flux behavior throughout the monitoring domain including both horizontal and vertical exchange flows.

54 ENVIRONMENTAL SCIENCES↗

Ultrasonic Thermometer Sticking Mitigation Assessment

Ultrasonic thermometers have potential to improve on current technologies for very high temperature measurements. One issue limiting their adoption is the formation of diffusion bonds between the acoustic waveguide used as the sensor, and its surroundings (in some cases, a protective sheath). Several potential methods for reducing this diffusion bonding (known as sticking) have been identified. Prototype ultrasonic thermometers were fabricated and tested to high temperatures in order to evaluate these methods. Several showed promise for low temperature use. The most promising option was 3-D printed ceramic spacers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Towards improved mesh-designing techniques of spark-ignition engines in the framework of spectral element methods

In the current paper we present an advanced meshing technique to perform high-fidelity numerical simulations in spark ignition (SI) engines. The design of the mesh is critical towards generating physically consistent, high fidelity data especially in regions of complex boundaries inside the cylinder, e.g., near the spark plugs. This is primarily due to the mesh deformation caused by the motion of the valve near the plug and also finer mesh sizes in the spark plug region. In the current work, we demonstrate the use of an overlapping grid (overset) methodology to design the mesh in the spark-plug region in a 2D SI engine-like geometry for a high-order simulation, based on the spectral element method (SEM). The data in the overlapping region is exchanged between the spark-plug geometry and the geometry containing rest of the objects like the piston, cylinder head, valve etc., using a high order spectral interpolation technique. The numerical simulations have been further compared against the standard, single (non-overset) grid, meshing technique for the whole 2D domain. The results further illustrate the capability of overlapping grid methodology in handling mesh deformation compared to the standard grid case and also the ability to capture the flow dynamics with a similar level of fidelity as the standard one

overlapping grids↗

Blackbody radiation shift, multipole polarizabilities, oscillator strengths, lifetimes, hyperfine constants, and excitation energies in Ca{sup +}

A systematic study of Ca{sup +} atomic properties is carried out using a high-precision relativistic all-order method where all single, double, and partial triple excitations of the Dirac-Fock wave functions are included to all orders of perturbation theory. Reduced matrix elements, oscillator strengths, transition rates, and lifetimes are determined for the levels up to n=7. Recommended values and estimates of their uncertainties are provided for a large number of electric-dipole transitions. Electric-dipole scalar polarizabilities for the 5s, 6s, 7s, 8s, 4p{sub j}, 5p{sub j}, 3d{sub j}, and 4d{sub j} states and tensor polarizabilities for the 4p{sub 3/2}, 5p{sub 3/2}, 3d{sub j}, and 4d{sub j} states in Ca{sup +} are calculated. Methods are developed to accurately treat the contributions from highly excited states, resulting in significant (factor of 3) improvement in the accuracy of the 3d{sub 5/2} static polarizability value, 31.8(3)a{sub 0}{sup 3}, in comparison with the previous calculation [Arora et al., Phys. Rev. A 76, 064501 (2007).]. The blackbody radiation shift of the 4s-3d{sub 5/2} clock transition in Ca{sup +} is calculated to be 0.381(4) Hz at room temperature, T=300 K. Electric-quadrupole 4s-nd and electric-octupole 4s-nf matrix elements are calculated to obtain the ground-state multipole E2 and E3 static polarizabilities. Excitation energies of the ns, np, nd, nf, and ng states with n{<=} 7 in are evaluated and compared with experiment. Recommended values are provided for the 7p{sub 1/2}, 7p{sub 3/2}, 8p{sub 1/2}, and 8p{sub 3/2} removal energies for which experimental measurements are not available. The hyperfine constants A are determined for the low-lying levels up to n=7. The quadratic Stark effect on hyperfine structure levels of {sup 43}Ca{sup +} ground state is investigated. These calculations provide recommended values critically evaluated for their accuracy for a number of Ca{sup +} atomic properties for use in planning and analysis of various experiments as well as theoretical modeling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Consistent Second Moment Methods with Scalable Linear Solvers for Radiation Transport

Second moment methods (SMMs) are developed that are consistent with the discontinuous Galerkin spatial discretization of the discrete ordinates (or S\(_N\)) transport equations. The low-order (LO) diffusion system of equations is discretized with fully consistent P\(_1\), local discontinuous Galerkin (LDG), and interior penalty (IP) methods. A discrete residual approach is used to derive SMM correction terms that make each of the LO systems consistent with the high-order discretization. We show that the consistent methods are more accurate and have better solution quality than independently discretized LO systems, that they preserve the diffusion limit, and that the LDG and IP consistent SMMs can be scalably solved in parallel on a challenging, multimaterial benchmark problem.

97 MATHEMATICS AND COMPUTING↗

High Order Finite Elements S{sub N} Transport in X-Y Geometry on Meshes with Curved Surfaces

Radiation hydrodynamics is useful to model astrophysics, ICF, and glass manufacturing. A large amount of research has been conducted to understand how to solve hydrodynamics equations using high-order finite elements. Researchers at LLNL have developed a general high-order FEM library, Modular Finite Element Methods (MFEM), to enable this research. The BLAST code uses MFEM to evolve the Lagrangian hydrodynamics equations, resulting in meshes with higher order curved surfaces. Our research focuses on the requirements for high order finite element solutions of the radiation transport equation with the eventual goal of studying the complete high-order radiation hydrodynamics solution methodology. For this research we used MFEM to develop a proof-of-concept code that solves the high order finite element transport equations in Cartesian coordinates on meshes with curved surfaces. We have solved several test problems to assess the behavior of our method. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-order parabolic beam approximation for aero-optics

The parabolic beam equations are solved using high-order compact differences for the Laplacians and Runge-Kutta integration along the beam path. The solution method is verified by comparison to analytical solutions for apertured beams and both constant and complex index of refraction. An adaptive 4th-order Runge-Kutta using an embedded 2nd-order method is presented that has demonstrated itself to be very robust. For apertured beams, the results show that the method fails to capture near aperture effects due to a violation of the paraxial approximation in that region. Initial results indicate that the problem appears to be correctable by successive approximations. A preliminary assessment of the effect of turbulent scales is undertaken using high-order Lagrangian interpolation. The results show that while high fidelity methods are necessary to accurately capture the large scale flow structure, the method may not require the same level of fidelity in sampling the density for the index of refraction. The solution is used to calculate a phase difference that is directly compared with that commonly calculated via the optical path difference. Propagation through a supersonic boundary layer shows that for longer wavelengths, the traditional method to calculate the optical path is less accurate than for shorter wavelengths. While unlikely to supplant more traditional methods for most aero-optics applications, the current method can be used to give a quantitative assessment of the other methods as well as being amenable to the addition of more physics.

97 MATHEMATICS AND COMPUTING↗