SEARCH · Search NASA

Results for “LUNAR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS2017

NASA's Near Earth Asteroid Scout Mission

NASA is developing solar sail propulsion for a near-term Near Earth Asteroid (NEA) reconnaissance mission and laying the groundwork for their future use in deep space science and exploration missions. The NEA Scout mission, funded by NASA's Advanced Exploration Systems Program and managed by NASA MSFC, will use the sail as primary propulsion allowing it to survey and image one or more NEA's of interest for possible future human exploration. NEA Scout uses a 6U cubesat (to be provided by NASA's Jet Propulsion Laboratory), an 86 m2 solar sail and will weigh less than 14 kilograms. The solar sail for NEA Scout will be based on the technology developed and flown by the NASA NanoSail-D and The Planetary Society's Lightsail-A. Four ~7 m stainless steel booms wrapped on two spools (two overlapping booms per spool) will be motor deployed and pull the sail from its stowed volume. The sail material is an aluminized polyimide approximately 3 microns thick. NEA Scout will launch on the Space Launch System (SLS) first mission in 2018 and deploy from the SLS after the Orion spacecraft is separated from the SLS upper stage. The NEA Scout spacecraft will stabilize its orientation after ejection using an onboard cold-gas thruster system. The same system provides the vehicle Delta-V sufficient for a lunar flyby. After its first encounter with the moon, the 86 m2 sail will deploy, and the sail characterization phase will begin. A mechanical Active Mass Translation (AMT) system, combined with the remaining ACS propellant, will be used for sail momentum management. Once the system is checked out, the spacecraft will perform a series of lunar flybys until it achieves optimum departure trajectory to the target asteroid. The spacecraft will then begin its two year-long cruise. About one month before the asteroid flyby, NEA Scout will pause to search for the target and start its approach phase using a combination of radio tracking and optical navigation. The solar sail will provide continuous low thrust to enable a relatively slow flyby of the target asteroid under lighting conditions favorable to geological imaging. Once complete, NASA will have demonstrated the capability to fly low-cost, high Delta-V cubesats to perform interplanetary missions.

Johnson, Les↗

NASA NTRS1990

Integrated lunar materials manufacturing process

A manufacturing plant and process for production of oxygen on the moon uses lunar minerals as feed and a minimum of earth-imported, process materials. Lunar feed stocks are hydrogen-reducible minerals, ilmenite and lunar agglutinates occurring in numerous, explored locations mixed with other minerals in the pulverized surface layer of lunar soil known as regolith. Ilmenite (FeTiO.sub.3) and agglutinates contain ferrous (Fe.sup.+2) iron reducible by hydrogen to yield H.sub.2 O and metallic Fe at about 700.degree.-1,200.degree. C. The H.sub.2 O is electrolyzed in gas phase to yield H.sub.2 for recycle and O.sub.2 for storage and use. Hydrogen losses to lunar vacuum are minimized, with no net hydrogen (or any other earth-derived reagent) consumption except for small leaks. Feed minerals are surface-mined by front shovels and transported in trucks to the processing area. The machines are manned or robotic. Ilmenite and agglutinates occur mixed with silicate minerals which are not hydrogen-reducible at 700.degree.-1,200.degree. C. and consequently are separated and concentrated before feeding to the oxygen generation process. Solids rejected from the separation step and reduced solids from the oxygen process are returned to the mine area. The plant is powered by nuclear or solar power generators. Vapor-phase water electrolysis, a staged, countercurrent, fluidized bed reduction reactor and a radio-frequency-driven ceramic gas heater are used to improve thermal efficiency.

Gibson, Michael A.↗

NASA NTRS2012

Evaluating Three Active Thermal Architectures for Exploration Missions

Mass and cost are typically the two biggest challenges facing space craft designers. Active thermal control systems for crewed space-craft are typically among the more massive and costly systems on the vehicle. A study was completed evaluating three different thermal control system architectures to evaluate overall performance, mass and cost for a typical exploration mission profile. The architectures that were evaluated were 1 - a two-loop system using an internal liquid loop interfacing with an external liquid loop and flow loop with flow through radiators; 2 - a-single loop architecture with flow through radiators utilizing a regenerative heat exchanger and heater; and 3 - a single-loop architecture with heat pipe radiators. Environmental conditions, calculated for a given lunar exploration mission, and mission heat load profiles, generated based on previous Orion time lines, were evalauated through the phases of the on orbit mission. Performance for each of the architectures was evaluated along with the resultant mass of each system. Recommendations include adding a thermal topping system to lunar missions due to the extreme hot environments encountered in near-lunar approaches.

Cross, Cynthia D.↗

NASA NTRS2009

A Brief Survey of Media Access Control, Data Link Layer, and Protocol Technologies for Lunar Surface Communications

This paper surveys and describes some of the existing media access control and data link layer technologies for possible application in lunar surface communications and the advanced wideband Direct Sequence Code Division Multiple Access (DSCDMA) conceptual systems utilizing phased-array technology that will evolve in the next decade. Time Domain Multiple Access (TDMA) and Code Division Multiple Access (CDMA) are standard Media Access Control (MAC) techniques that can be incorporated into lunar surface communications architectures. Another novel hybrid technique that is recently being developed for use with smart antenna technology combines the advantages of CDMA with those of TDMA. The relatively new and sundry wireless LAN data link layer protocols that are continually under development offer distinct advantages for lunar surface applications over the legacy protocols which are not wireless. Also several communication transport and routing protocols can be chosen with characteristics commensurate with smart antenna systems to provide spacecraft communications for links exhibiting high capacity on the surface of the Moon. The proper choices depend on the specific communication requirements.

Wallett, Thomas M.↗

NASA NTRSDate not supplied

Overview of Nasa's Watts on the Moon Challenge Phase 1

As NASA works to extend human exploration of the solar system, unprecedented capacity for electrical and thermal energy will be needed to support sustained human presence and the beginning of industrial activity on the Moon. Solar energy is abundant on the lunar surface but extended night hours (up to 350 consecutive hours) and extreme temperature change from daylight to nighttime operation creates complexity for solar power use. Analogous issues arise on Earth, where demand for additional renewable energy generation, including solar, is rising, but better power management, distribution, and energy storage solutions are needed to address intermittency and resiliency, among other issues. To accelerate the development of technologies for power distribution and energy storage that can operate in extreme lunar conditions, NASA’s Centennial Challenges Program launched the Watts on the Moon Challenge in September 2020. Submissions for Phase 1 of the challenge were due in March 2021 and winners were announced in May 2021. This paper provides an overview of the challenge, key technical requirements, outcomes from Phase 1, and an update on Phase 2 of the challenge, which is currently ongoing.

Denise P. Morris↗

NASA NTRS2009

Thermal Vacuum Test of Ice as a Phase Change Material Integrated with a Radiator

Water may be used as radiation shielding for Solar Particle Events (SPE) to protect crewmembers in the Lunar Electric Rover (LER). Because the water is already present for radiation protection, it could also provide a mass efficient solution to the vehicle's thermal control system. This water can be frozen by heat rejection from a radiator and used as a Phase Change Material (PCM) for thermal storage. Use of this water as a PCM can eliminate the need for a pumped fluid loop thermal control system as well as reduce the required size of the radiator. This paper describes the testing and analysis performed for the Rover Engineering Development Unit (REDU), a scaled-down version of a water PCM heat sink for the LER. The REDU was tested in a thermal-vacuum chamber at environmental temperatures similar to those of a horizontal radiator panel on the lunar surface. Testing included complete freeze and melt cycles along with scaled transient heat load profiles simulating a 24-hour day for the rover.

Lee, Steve↗

NASA NTRS2010

Thermal Vacuum Test of Ice as a Phase Change Material Integrated with a Radiator

Water may be used as radiation shielding for Solar Particle Events (SPE) to protect crewmembers in the Lunar Electric Rover (LER). Because the water is already present for radiation protection, it could also provide a mass efficient solution to the vehicle's thermal control system. This water can be frozen by heat rejection from a radiator and used as a Phase Change Material (PC1V1) for thermal storage. Use of this water as a PCM can eliminate the need for a pumped fluid loop thermal control system as well as reduce the required size of the radiator. This paper describes the testing and analysis performed for the Rover Engineering Development Unit (REDU), a scaled-down version of a water PCM heat sink for the LER. The REDU was tested in a thermal-vacuum chamber at environmental temperatures similar to those of a horizontal radiator panel on the lunar surface. Testing included complete freeze and melt cycles along with scaled transient heat load profiles simulating a 24-hour day for the rover.

Lee, Steve A.↗

NASA NTRS2020

SOTERIA: Searching for Organisms Through Equipment Recovery at Impact Areas

All spacecraft sent to the Moon have carried viable microorganisms with them. Because the Moon’s surface environment is sterilizing to life and the Moon itself is not considered to house indigenous life forms, NASA policy has not required the elimination or even the measurement of microbial contamination on lunar space equipment prior to launch. Yet multiple exposure studies have demonstrated that microorganisms can likely survive high-velocity impacts and exposure to space stresses for some time. Does any of the Earth biomass residing on lunar hardware remain viable? The Artemis program offers a chance to take advantage of this natural experiment, through a mission that is both feasible and promises to generate unprecedented data on microbial survival. We propose a two-phased mission in which imaging would be conducted to obtain data on previously crashed spacecraft near the Lunar South Pole, then astronauts would recover spacecraft debris to return to Earth for analysis of viable life and biosignatures. We propose the name SOTERIA for this planetary protection mission, for the Greek goddess of safety and delivery from harm.

astrobiology↗

NASA NTRS2018

SLS Ambassador Program

Overview of the agency’s plans for deep space exploration: (1) NASA has a phased approach to ensure our nation’s leadership in space exploration, beginning in Earth orbit, developing our skills in lunar space, and extending those skills and technologies to a human mission to Mars. (2) Currently, NASA is commercializing low-Earth orbit using commercial companies to transport supplies and scientific experiments to the ISS. NASA is working closely with them to launch American astronauts to the station from American soil soon. (3) ISS is our platform to better understand living and working in space. NASA paved the way for commercial companies to take over that work so that we could focus on human exploration of deep space. (4) NASA will establish a Lunar Orbiting Platform – Gateway to establish an outpost near the moon. It will enable us to get to Mars in a step-by-step fashion, with lessons learned in each phase of the process informing the next steps. SLS is the only launch vehicle with the power to get Orion and an in-space propulsion system to an orbit and a speed capable of enabling travel to the moon and beyond.

Lindstrom, Marcia↗

NASA NTRS2013

Joint M3 and Diviner Analysis of the Mineralogy, Glass Composition, and Country Rock Content of Pyroclastic Deposits in Oppenheimer Crater

Here we present our analysis of the near- and mid-infrared spectral properties of pyroclastic deposits within the floor fractured Oppenheimer Crater that are hypothesized to be Vulcanian in origin. These are the first results of our global study of lunar pyroclastic deposits aimed at constraining the range of eruption processes on the Moon. In the near-infrared, we have employed a new method of spectral analysis developed in Horgan et al. (2013) of the 1 m iron absorption band in Chandrayaan-1 Moon Mineralogy Mapper (M3) spectra. By analyzing both the position and shape of the 1 m band we can detect and map the distribution of minerals, glasses, and mixtures of these phases in pyroclastic deposits. We are also using mid-infrared spectra from the Lunar Reconnaissance Orbiter Diviner Lunar Radiometer Experiment to develop ~200 m/pixel Christiansen Feature (CF) maps, which correlate with silica abundance. One of the benefits of using CF maps for analysis of pyroclastic deposits is that they can be used to detect silicic country rock that may have been emplaced by Vulcanian-style eruptions, and are sensitive to iron abundance in glasses, neither of which is possible in the near-infrared. M3 analysis reveals that the primary spectral endmembers are low-calcium pyroxene and iron-bearing glass, with only minor high-calcium pyroxene, and no detectable olivine. The large deposit in the south shows higher and more extensive glass concentrations than the surrounding deposits. We interpret the M3 spectra of the pyroclastic deposits as indicating a mixture of low-calcium pyroxene country rock and juvenile glass, and no significant olivine. Analysis of Diviner CF maps of the Oppenheimer crater floor indicates an average CF value of 8.16, consistent with a mixture of primarily plagioclase and some pyroxene. The average CF values of the pyroclastic deposits range from 8.31 in the SW to 8.24 in the SE. Since CF values within the deposits are as high as 8.49, the lower average CF values of the deposits suggest that each deposit is a mixture of crater floor material and highly mafic juvenile material consistent with either olivine or Fe-bearing pyroclastic glass. Synthesizing our M3 and Diviner results indicates that the crater floor consists of plagioclase with some pyroxene, and the pyroclastic deposits are a mix of this substrate and a glass-rich juvenile material. While we cannot determine the iron content of the glass from M3 spectra alone, the high Diviner CF values suggest that the glass is relatively iron-rich. Indeed, FeO abundances inferred from CF values using the method of Allen et al. (2012) imply that the large southern deposit exhibits a significant enhancement in iron content. This supports our hypothesis that the glass in this deposit is relatively iron-rich.

Bennett, Kristen A.↗

NASA NTRS2013

Lunar Polar In Situ Resource Utilization (ISRU) as a Stepping Stone for Human Exploration

A major emphasis of NASA is to extend and expand human exploration across the solar system. While specific destinations are still being discussed as to what comes first, it is imperative that NASA create new technologies and approaches that make space exploration affordable and sustainable. Critical to achieving affordable and sustainable exploration beyond low Earth orbit (LEO) are the development of technologies and approaches for advanced robotics, power, propulsion, habitats, life support, and especially, space resource utilization systems. Space resources and how to use them, often called In-Situ Resource Utilization (ISRU), can have a tremendous beneficial impact on robotic and human exploration of the Moon, Mars, Phobos, and Near Earth Objects (NEOs), while at the same time helping to solve terrestrial challenges and enabling commercial space activities. The search for lunar resources, demonstration of extraterrestrial mining, and the utilization of resource-derived products, especially from polar volatiles, can be a stepping stone for subsequent human exploration missions to other destinations of interest due to the proximity of the Moon, complimentary environments and resources, and the demonstration of critical technologies, processes, and operations. ISRU and the Moon: There are four main areas of development interest with respect to finding, obtaining, extracting, and using space resources: Prospecting for resources, Production of mission critical consumables like propellants and life support gases, Civil engineering and construction, and Energy production, storage, and transfer. The search for potential resources and the production of mission critical consumables are the primary focus of current NASA technology and system development activities since they provide the greatest initial reduction in mission mass, cost, and risk. Because of the proximity of the Moon, understanding lunar resources and developing, demonstrating, and implementing lunar ISRU provides a near and early opportunity to perform the following that are applicable to other human exploration mission destinations: Identify and characterize resources, how they are distributed, and the material, location and environment in which they are found; Demonstrate concepts, technologies, and hardware that can reduce the cost and risk of human exploration beyond Earth orbit; Use the Moon for operation experience and mission validation for much longer missions that are farther from Earth Develop and evolve ISRU to support sustained, economical human presence beyond Earth's orbit, including promoting space commercialization As Table 1 depicts, the Moon provides environments and resources applicable to Mars and NEOs. Two lunar ISRU resource and product pathways that have notable synergism with NEO, Phobos/Demos, and Mars ISRU are oxygen/metal extraction from regolith, and water/volatile extraction from lunar polar materials. To minimize the risk of developing and incorporating ISRU into human missions, a phased implementation plan is recommended that starts with prospecting and demonstrating critical technologies on robotic and human missions, then performing pilot scale operations (in non-mission critical roles) to enhance exploration mission capabilities, leading to full utilization of space resources in mission critical roles. Which lunar ISRU pathway is followed will depend on the results of early resource prospecting/proof-ofconcept mission(s), and long-term human exploration plans.

Sanders, Gerald B.↗

NASA NTRS2024

Evaluation of Cleaning Methods for Dust Mitigation of Lunar Docking and Hatch Seals

Low-leakage seals are an enabling technology for future lunar surface systems, and they must be kept clean to ensure that crews have sufficient breathable air for extended lunar surface missions. Previous testing on representative state-of-the-art seals showed that while seals can tolerate some level of lunar simulant dust contamination, dust can degrade seal performance to a point at which seal leak rates exceed maximum allowable values. The ability to clean simulant from seals had not been thoroughly studied, and the effectiveness and potential complications of using different cleaning methods for lunar seals were not well understood. To address this knowledge gap, researchers at the NASA Glenn Research Center executed a multiphase study to better understand and mitigate seal dust-exposure risks. The focus of this report is on the second phase of that study, in which tests were conducted to evaluate the viability of seal cleaning methods for use in the lunar environment. Multiple methods for cleaning seals contaminated with lunar simulant were assessed for cleaning effectiveness and viability for use in the lunar environment. Leak tests were performed on seals after they were cleaned to determine whether leak rates could be brought back to acceptable levels, and cleaned seals were examined to determine whether their surfaces had been damaged by the cleaning processes. This phase of the study also investigated changes in the seals’ adhesion forces as a result of contamination and cleaning.

Dust Mitigation↗

NASA NTRS1972

Lunar topography - Global determination by radar.

Previous methods used for two-dimensional radar mapping of the moon are contrasted with new techniques that add altitude information to the radar map. Delay-Doppler stereoscopy and delay-Doppler interferometry are shown to provide surface-height variations with higher accuracy and better global fidelity than has been possible previously. Sample results are presented for altitude contours on the moon as obtained with the Haystack and Westford radar systems of the Massachusetts Institute of Technology. An appendix describes the mathematical principles of delay-Doppler interferometry in determining the position of an arbitrary reflecting region of the lunar surface from measurements of the time delay, Doppler shift, and fringe phase of radar echoes from that region.

Shapiro, I. I.↗

NASA NTRS1978

Crystallization of a lunar magma ocean

The results of applying the presently most detailed thermal model to the cooling, crystallization and differentiation of a lunar magma ocean are used to delineate its general features, i.e., those features that are model independent within reasonable variations in ocean characteristics. Two primitive lunar compositions are used to illustrate the effect of different compositions and phase equilibria on the solidification time and mineralogy of magma oceans. The magma ocean thermal model led to some inferences about the thermal evolution of the outer portion of the moon modeled as isolated magma pods rather than as a magma ocean.

Minear, J. W.↗

NASA NTRSDate not supplied

Habitability Insights from Selected NASA Habitat Mockup Testing Campaigns

In 2004, President Bush announced his Vision for Space Exploration, causing NASA to look beyond Low Earth Orbit. While the resulting Constellation Program was cancelled, a focus on expanding beyond LEO has continued to this day. Since 2005, multiple habitat concepts have been developed for the Moon, Mars, or deep space. Some of these concepts were mocked up in virtual or physical form and used in habitability testing campaigns. This paper provides an understanding of the value of two decades of habitability testing and highlights key insights obtainable only through human interaction with a vehicle concept design. The focus of this paper will be limited to primarily habitation work conducted primarily at or by the Johnson Space Center in support of active space habitat development programs or studies and is further limited to fixed habitats and will not discuss mobile habitats such as pressurized rovers.

Lunar Surface Habitation↗

NASA NTRS2021

Aqua Factorem: Ultra Low Energy Lunar Water Extraction

We propose a new method we call Aqua Factorem to extract lunar water. It will drastically reduce energy and complexity of lunar mining operations helping to establish this industry. Other methods to extract water from the regolith are based on phase change, pumping energy into the regolith to sublimate the ice into vapor, then capturing the vapor, re-freezing it, and hauling the solid ice to a chemical processor where it is converted again into vapor for purification then electrolysis. This requires transporting high power into the permanently shadowed regions (PSRs) not only to vaporize the ice in situ in the soil but to heat the surrounding soil itself, which is wasted energy. Still other methods are based on strip mining and hauling the resource along with slag (the unwanted silicates, which constitutes about 95% of the mass), to a processing unit that is located outside the PSRs. That may be a simpler architecture but is generally not favored because hauling 49,000 t of regolith over many kilometers yearly to produce the projected demand of 2,450 t of propellant would be terribly difficult and expensive with high risk that the vehicles will get stuck driving with such loads across the unprepared regolith. We propose an alternative to both of these approaches, taking advantage of the processing that the unique lunar geology has already performed. Micrometeoroid bombardment has already broken most solid material in the upper part of the regolith into fine grains. This includes solid material of all compositions, including the ice, which is as hard as granite at PSR temperatures and is therefore essentially another type of rock. These ice grains are intermixed with all the other minerals, so a simple, ultra-low-energy grain-sorting process can extract the ice without phase change. As another benefit it can extract the 1 wt% free metal known to be in lunar soil, again with very little energy. The ice can then be hauled to the chemical processing unit in solid phase and converted into rocket propellant. We estimate the 800 kW power needed for thermal extraction can be reduced to less than 100 watts using the new method. This affects the entire architecture of the mining operation producing extensive economic benefit, which we will quantify in this study. We will study it in the context of a mission to mine propellants commercially for space tugs that boost commercial communication satellites from Geosynchronous Transfer Orbit (GTO) to Geostationary Orbit (GEO) then return to the lunar surface for refueling. This simple architecture requires the minimum number of in-space elements, and notably does not require an in-space propellant depot, so it provides the lowest cost and lowest risk startup for a commercial operation. The study will also test the innovative Aqua Factorem process through laboratory experiments, and this will produce basic insights into the handling of lunar resources.

lunar↗

NASA NTRS1973

Development of mass spectrometric techniques applicable to the search for organic matter in the lunar crust

Data processing techniques were developed to measure with high precision and sensitivity the line spectra produced by a high resolution mass spectrometer. The most important aspect of this phase was the interfacing of a modified precision microphotometer-comparator with a computer and the improvement of existing software to serve the special needs of the investigation of lunar samples. In addition, a gas-chromatograph mass spectrometer system was interfaced with the same computer to allow continuous recording of mass spectra on a gas chromatographic effluent and efficient evaluation of the resulting data. These techniques were then used to detect and identify organic compounds present in the samples returned by the Apollo 11 and 12 missions.

Biemann, K.↗

NASA NTRS1994

Experimental reduction of lunar mare soil and volcanic glass

We have reduced high-titanium lunar mare soil and iron-rich lunar volcanic glass with hydrogen at temperatures of 900-1100 C. Ilmenite is the most reactive phase in the soil, exhibiting rapid and complete reduction at all temperatures. Ferrous iron in the glass is extensively reduced concurrent with partial crystallization. In both samples pyroxene and olivine undergo partial reduction along with chemical and mineralogical modifications. High-temperature reduction provides insight into the optical and chemical effects of lunar soil maturation, and places constraints on models of that process. Mare soil and volcanic glass are attractive feedstocks for lunar oxygen production, with achievable yields of 2-5 wt%.

Allen, Carlton C.↗