Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Evidence of Temporal Variation of Titan Atmospheric Density in 2005-2013

One major science objective of the Cassini mission is an investigation of Titan's atmosphere constituent abundances. Titan's atmospheric density is of interest not only to planetary scientists but also to mission design and mission control engineers. Knowledge of the dependency of Titan's atmospheric density with altitude is important because any unexpectedly high atmospheric density has the potential to tumble the spacecraft during a flyby. During low-altitude Titan flyby, thrusters are fired to counter the torque imparted on the spacecraft due to the Titan atmosphere. The denser the Titan's atmosphere is, the higher are the duty cycles of the thruster firings. Therefore thruster firing telemetry data could be used to estimate the atmospheric torque imparted on the spacecraft. Since the atmospheric torque imparted on the spacecraft is related to the Titan's atmospheric density, atmospheric densities are estimated accordingly. In 2005-2013, forty-three low-altitude Titan flybys were executed. The closest approach altitudes of these Titan flybys ranged from 878 to 1,074.8 km. Our density results are also compared with those reported by other investigation teams: Voyager-1 (in November 1980) and the Huygens Atmospheric Structure Instrument, HASI (in January 2005). From our results, we observe a temporal variation of the Titan atmospheric density in 2005-2013. The observed temporal variation is significant and it isn't due to the estimation uncertainty (5.8%, 1 sigma) of the density estimation methodology. Factors that contributed to this temporal variation have been conjectured but are largely unknown. The observed temporal variation will require synergetic analysis with measurements made by other Cassini science instruments and future years of laboratory and modeling efforts to solve. The estimated atmospheric density results are given in this paper help scientists to better understand and model the density structure of the Titan atmosphere.

Atmosphere↗

Global Climate Forcing from Albedo Change Caused by Large-scale Deforestation and Reforestation: Quantification and Attribution of Geographic Variation

Large-scale deforestation and reforestation have contributed substantially to historical and contemporary global climate change in part through albedo-induced radiative forcing, with meaningful implications for forest management aiming to mitigate climate change. Associated warming or cooling varies widely across the globe due to a range of factors including forest type, snow cover, and insolation, but resulting geographic variation remain spoorly described and has been largely based on model assessments. This study provides an observation-based approach to quantify local and global radiative forcings from large-scale deforestation and reforestation and further examines mechanisms that result in the spatial heterogeneity of radiative forcing. We incorporate a new spatially and temporally explicit land cover-specific albedo product derived from Moderate Resolution Imaging Spectroradiometer with a historical land use data set (Land Use Harmonization product). Spatial variation in radiative forcing was attributed to four mechanisms, including the change in snow-covered albedo, change in snow-free albedo, snow cover fraction, and incoming solar radiation. We find an albedo-only radiative forcing (RF) of -0.819 W m(exp -2) if year 2000 forests were completely deforested and converted to croplands. Albedo RF from global reforestation of present-day croplands to recover year 1700 forests is estimated to be 0.161 W m)exp -2). Snow-cover fraction is identified as the primary factor in determining the spatial variation of radiative forcing in winter, while the magnitude of the change in snow-free albedo is the primary factor determining variations in summertime RF. Findings reinforce the notion that, for conifers at the snowier high latitudes, albedo RF diminishes the warming from forest loss and the cooling from forest gain more so than for other forest types, latitudes, and climate settings.

Jiao, Tong↗

Nucleosynthetic Heterogeneity Controls Vanadium Isotope Variations in Bulk Chondrites

The vanadium (V) isotope composition of early solar system materials have been hypothesized to be sensitive to high energy irradiation that originated from the young Sun. Vanadium has two isotopes with masses 50 and 51 that have (51)V/(50)V ratio of approximately 410. High energy irradiation produces (50)V from various target isotopes of Ti, Cr and Fe, which would result in light V isotope compositions (expressed as delta (51)V in per mille = 1000 x (((51)V/(50)V(sub sample)/(51)V/(50)V(sub AlfaAesar)) - 1)) relative to a presumably chondritic starting composition. Recently published V isotope data for calcium aluminium inclusions (CAIs) has revealed some very negative values relative to chondrites (by almost -4 per mille) that were indeed interpreted to reflect irradiation processes despite the fact that the studied CAIs all exhibited significant initial abundances of (10)Be, while only a few CAIs displayed light V isotope compositions. It is difficult to relate V isotope variations directly to a singular process because V only possesses two isotopes. Therefore, V isotope variations can principally be produced both mass dependent and independent processes. Mass dependent kinetic stable isotope fractionation is common in CAIs for refractory elements due to partial condensation/evaporation processes. The element strontium (Sr) has an almost identical condensation temperature to V and studies of stable Sr isotope compositions in CAIs reveal both heavy and light values relative to chondrites of several permil. These variations are similar in magnitude to those reported for V isotopes in CAIs, which suggests it is possible that some of the V isotope variation in CAIs could be due to kinetic stable isotope fractionation during condensation/evaporation processes.

Nielsen, S. G.↗

Assimilation of AERONET and MODIS AOT Observations Using Variational and Ensemble Data Assimilation Methods and Its Impact on Aerosol Forecasting Skill

Data assimilation of Aerosol Robotic Network (AERONET) and Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical thickness (AOT) for aerosol forecasting was tested within the Navy Aerosol Analysis Prediction System (NAAPS) framework, using variational and ensemble data assimilation methods. Navy aerosol forecasting currently makes use of a deterministic NAAPS simulation coupled to Navy Variational Data Assimilation System for aerosol optical depth, a two-dimensional variational data assimilation system, for MODIS AOT assimilation. An ensemble version of NAAPS (ENAAPS) coupled to an ensemble adjustment Kalman filter (EAKF) from the Data Assimilation Research Testbed was recently developed, allowing for a range of data assimilation and forecasting experiments to be run with deterministic NAAPS and ENAAPS. The main findings are that the EAKF, with its flow-dependent error covariances, makes better use of sparse observations such as AERONET AOT. Assimilating individual AERONET observations in the two-dimensional variational system can increase the analysis errors when observations are located in high AOT gradient regions. By including AERONET with MODIS AOT assimilation, the magnitudes of peak aerosol events (AOT> 1) were better captured with improved temporal variability, especially in India and Asia where aerosol prediction is a challenge. Assimilating AERONET AOT with MODIS had little impact on the 24 h forecast skill compared to MODIS assimilation only, but differences were found downwind of AERONET sites. The 24 h forecast skill was approximately the same for forecasts initialized with analyses from AERONET AOT assimilation alone compared to MODIS assimilation, particularly in regions where the AERONET network is dense; including the United States and Europe, indicating that AERONET could serve as a backup observation network for over-land synoptic-scale aerosol events.

Rubin, Juli I.↗

Intraseasonal Variations of Nonmigrating Tides Observed Near the Mesopause

Nonmigrating tides excited in the tropical troposphere by latent heat release from deep convection are known to be responsible for introducing the longitudinal structures in the upper atmosphere and the ionosphere. This study presents for the first time an extensive analysis of the prominent wave-3 and wave-4 longitudinal structures using nearly 14 years of temperature observations by the Microwave Limb Sounder instrument operated on the Aura satellite from 2004 to 2017. The observations reveal significant intraseasonal (~30-60 days) periodic variations in the amplitudes of these wave structures at ~97-km altitude near the mesopause. Some large wave amplitudes accompany strong activity of the Madden-Julian Oscillation. Rainfall data from the Tropical Rainfall Measuring Mission are used as a proxy of latent heating to investigate the source of these variations. Intraseasonal signatures in the wave structures are observed to coincide with the rainfall variations, indicating that the tropospheric 30- to 60- day oscillation is an important driver of the same periodic changes in the upper atmosphere. Given that not all intraseasonal oscillations in the lower atmosphere have corresponding signatures in the longitudinal wave structures, the atmospheric conditions and other influences are important. This study provides evidence on the connection between intraseasonal variations of tides in the upper atmosphere and the changes in the forcing by latent heat release in the troposphere.

Liu, Guiping↗

Quantifying the Storm Time Thermospheric Neutral Density Variations Using Model and Observations

Accurate determination of thermospheric neutral density holds crucial importance for satellited rag calculations. The problem is twofold and involves the correct estimation of the quiet time climatology and storm time variations. In this work, neutral density estimations from two empirical and threephysics based models of the ionosphere thermosphere are compared with the neutral densities along the Challenging MicroSatellite Payload satellite track for six geomagnetic storms. Storm time variations are extracted from neutral density by (1) subtracting the mean difference between model and observation (bias),(2) setting climatological variations to zero, and (3) multiplying model data with the quiet time ratio between the model and observation. Several metrics are employed to evaluate the model performances. We find that the removal of bias or climatology reveals actual performance of the model in simulating the storm time variations. When bias is removed, depending on event and model, storm time errors in neutral density can decrease by an amount of 113% or can increase by an amount of 12% with respect to error in models with quiet time bias. It is shown that using only average and maximum values of neutral density to determine the model performances can be misleading since a model can estimate the averages fairly well but may not capture the maximum value or vice versa. Since each of the metrics used for determining model performances provides different aspects of the error, among these, we suggest employing mean absolute error, prediction efficiency, and normalized root mean square error together as a standard set ofmetrics for the neutral density.

Eyiguler, E. Ceren Kalafatoglu↗

Impact of Powder Supply Variation on Mechanical Properties for Additive Manufacture of Alloy 718

The Additive Manufacturing Structural Integrity Initiative (AMSII) examined how a number of different Alloy 718 powder lots can create variation in microstructure and mechanical properties in parts fabricated using Laser Powder Bed Fusion. Being a common alloy, Alloy 718 powder can be found in a variety of compositions, fabrication techniques, and powder size distribution. Sixteen virgin powders, and three recycled powders were used to build samples for microstructure analysis, fatigue and tensile testing. The major impacts of the different powders manifested in variations in the microstructure, such as minor phases and grain size variation. There were corresponding variations in mechanical properties. A down-selection of powders were chosen for additional analysis, and a powder recyclability study was completed to look at the effect of reused powder.

Alloy 718↗

Canopy height and climate dryness parsimoniously explain spatial variation of unstressed stomatal conductance

The spatio-temporal variation of stomatal conductance directly regulates photosynthesis, water partitioning, and biosphere-atmosphere interactions. While many studies have focused on stomatal response to stresses, the spatial variation of unstressed stomatal conductance remains poorly determined, and is usually characterized in land surface models (LSMs) simply based on plant functional type (PFT). Here, we derived unstressed stomatal conductance at the ecosystem-scale using observations from 115 global FLUXNET sites. When aggregated by PFTs, the across-PFT pattern was highly consistent with the parameterizations of LSMs. However, PFTs alone captured only 17% of the variation in unstressed stomatal conductance across sites. Within the same PFT, unstressed stomatal conductance was negatively related to climate dryness and canopy height, which explained 45% of the total spatial variation. Our results highlight the importance of plant environment interactions in shaping stomatal traits. The trait-environment relationship established here provides an empirical approach for improved parameterizations of stomatal conductance in LSMs.

Yanlan Liu↗

An Assessment of Stratospheric Water Vapor Trends and Variations Above the Boulder Region

This study analyzes time series of stratospheric water vapor (SWV) data at 30 hPa, based on frost-point hygrometer (FPH) measurements at Boulder, CO (40°N, 255°E), and on sets of HALOE scans above that region for 1993 through 2005; their differing trends agree with previously published findings. Yet, there is an apparent switch over in 2002 from positive to negative trends in the HALOE time series, and that change follows the episodic decrease of tropical, lower stratospheric SWV in early 2001. The HALOE data points only resolve medium to large scale spatial variations, as they are based on an average of four or more limb scans within a latitude/longitude sector near Boulder. The FPH time series do not indicate a similar change of trend in 2002, although its time series points have variations about the mean that are twice as large as those from HALOE. The FPH soundings are sensitive to variations from all spatial scales, however, including the effects of a local vertical mixing of the air due to gravity waves. The vertical gradient SWV mixing ratio with altitude is positive at 30 hPa. There is also a positive trend in methane and its conversion to water vapor during this time that may explain a slightly larger SWV trend from the local FPH data than from the HALOE data. The Nimbus 7 LIMS experiment provides daily SWV plots at medium to large scales during the dynamically active, winter and springtime periods, for assessing the effects of meridional transport of SWV from its source regions. There is transport of high SWV from polar regions and of lower SWV from the subtropics at those times. SWV variations and trends from both the FPH and HALOE time series are reasonable and in accord with the spatial scales that they observed.

Ellis Remsberg↗

Variation in Predicted Orbital Lifetime Due to Launch Year

We present trends in predicted orbital lifetimes of CubeSats based not only on orbital parameters, but also launch year and the Area-to-Mass (AtM) ratio of the CubeSat. Determining the orbital lifetime variation of CubeSats in low-Earth orbit (LEO) is an important aspect of mission planning because of two competing factors: (1) the maximum orbital lifetime for orbital debris mitigation requirements, and (2) the minimum orbit duration necessary to accomplish the spacecraft mission requirements. The orbital lifetime is a function of orbital parameters, the AtM ratio of the CubeSat, and date of orbit insertion. Solar flux varies with time, peaking and declining across the 11-year solar cycle and affecting the amount of atmospheric drag on the CubeSat. This results in large variations in orbital lifetime dependent on the mission's launch date. We calculated the variation of orbital lifetime for multiple commonly used 1U to 6U CubeSat mission types across the two upcoming solar cycles. For any given AtM ratio and altitude combination in this analysis, the predicted orbital lifetime varies up to a factor of five due to orbit insertion occurring in a different year. Some examples of orbital lifetime spreads are 5 months to 2 years, and 1.5 to 7.5 years. While orbital lifetimes correlate to the solar cycle, the phasing of the maximum values varies based on a given AtM ratio and altitude combination. Different combinations of these two factors will result in the maximum predicted orbital lifetime occurring at different launch years throughout the solar cycle. Therefore, there is not a specific year within a solar cycle which can be used to calculate the maximum predicted orbital lifetime for all CubeSats. Since CubeSats are typically flown as a rideshare payload on a launch vehicle, mission planners must account for launch date variation in their orbital lifetime predictions. We recommend calculating orbital lifetime for a range of dates to allow for risk planning due to launch date slips, and other mission planning best practices.

CubeSat↗

Variational Information Planning for Sequential Decision Making

We consider the setting of sequential decision making where, at each stage, potential actions are evaluated based on expected reduction in posterior uncertainty, given by mutual information (MI). As MI typically lacks a closed form, we propose an approach which maintains variational approximations of, both, the posterior and MI utility. Our planning objective extends an established variational bound on MI to the setting of sequential planning. The result, variational information planning (VIP), is an efficient method for sequential decision making. We further establish convexity of the variational planning objective and, under conditional exponential family approximations, we show that the optimal MI bound arises from a relaxation of the well-known exponential family moment matching property. Here, we demonstrate VIP for sensor selection, experiment design, and active learning, where it meets or exceeds methods requiring more computation, or those specialized to the task.

Pacheco, Jason↗

Seasonal Variation of Indoor Radon Concentration in the Tropics: Comparative studies between Kuala Lumpur, Malaysia and Kerala, India

The radiation dose received by man from indoor radon and its progeny is the largest at more than 50% of total dose received. The seasonal variation of indoor radon concentration in Kerala, India and Kuala Lumpur, Malaysia were studied. The Southwest coast of the Kerala state in India is known to have very high levels of natural background radiation owing to the rare earths rich monazite sand available in large amount. Kuala Lumpur, Malaysia used to be a famous tin mining area where it was done using open cast system. One-year measurements of radon concentration in houses were done for these two regions. It was found that there is considerable seasonal variation in the levels of radon in Kerala but the variation in Kuala Lumpur is only less than 10%.

58 GEOSCIENCES↗

ADM Analysis of gravity models within the framework of bimetric variational formalism

Bimetric variational formalism was recently employed to construct novel bimetric gravity models. In these models an affine connection is generated by an additional tensor field which is independent of the physical metric. In this work we demonstrate how the ADM decomposition can be applied to study such models and provide some technical intermediate details. Using ADM decomposition we are able to prove that a linear model is unstable as has previously been indicated by perturbative analysis. Moreover, we show that it is also very difficult if not impossible to construct a non-linear model which is ghost-free within the framework of bimetric variational formalism. However, we demonstrate that viable models are possible along similar lines of thought. To this end, we consider a set up in which the affine connection is a variation of the Levi-Civita one. As a proof of principle we construct a gravity model with a massless scalar field obtained this way.

79 ASTRONOMY AND ASTROPHYSICS↗

Environmental resource deficit may drive the evolution of intraspecific trait variation in invasive plant populations

Intraspecific trait variation within natural populations (i.e. intra-population trait variation, IPTV) is the basic source for selection and can have significant ecological consequences. Higher IPTV may increase a population's niche breath and benefit interspecies competition under a resource-limited environment, thus affecting the ability of a species to move into novel habitats. However, the reciprocal influences of variation in environmental conditions and phenotypic trait expression in spreading plant populations are not clearly defined. Here, we propose that during invasion, IPTV and its relative change in response to key resource enrichment may increase with the resource deficit of invaded sites, and that this relationship may facilitate plant invasions into resource-limited environments. We analyzed the invasion trend, IPTV and its response to water enrichment, and moisture variability among populations of an annual grass Brachypodium hybridum in California, United States. We incorporated a genotyping-by-sequencing approach, a common garden experiment that had two water level treatments, and public plant and climate databases. Our hypothesis was supported by the observation that for populations that invaded sites with higher spring moisture deficit, both their seed biomass IPTV (for the water-enriched treatment only) and relative change of the IPTV across water treatments were larger when examined in the common garden experiment. A generally north to south spreading direction was found in these B. hybridum populations, towards a drier and warmer climate exhibiting higher moisture deficit for plant growth. Our results suggest a role for interactions between IPTV (rather than trait means) and environmental resource availability in promoting plant invasions, providing new insights into the significance of IPTV in shaping plant geographic distributions.

54 ENVIRONMENTAL SCIENCES↗

An Introduction to Variational Calculus

Variational Calculus is an advanced topic in mathematics. This document exists to compile the basics of Variational Calculus in a readable and digestible manner for application by engineers. This document is a living document and will be updated as time moves forward. It is the hope that by reading this document, the basics of Variational Calculus can be readily applied to any system/function of interest. This does not serve as a replacement for textbooks or other learned sources but should act as a companion piece to better serve the reader in times of confusion and distress.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The relative variational model: A topological view of matter and its properties: Specific heat and enthalpy

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the Debye's integral of the heat capacity at constant volume is analytically solved. The experimental data of the specific heat at constant pressure and the enthalpy variations are also analytically depicted by the model in the temperature range of 0 K up to the melting point. The data reductions were applied to the oxides Al{sub 2}O{sub 3} and UO{sub 2}. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The relative variational model - A topological view of matter and its properties: UO{sub 2}{sup {+-}x} density

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the lattice parameter and specific mass of UO{sub 2}{sup {+-}x} are depicted in dependence on the variations of the stoichiometry in the band of -0.016 {<=} x and <0.25 and temperature from 0 K up to melting point. (authors)

36 MATERIALS SCIENCE↗

Linking Soil Moisture Variation and Abundance of Plants to Geomorphic Processes: A Generalized Model for Erosion-Uplifting Landscapes

American Geophysical Union. All Rights Reserved. The diffusive and advective erosion-created landscapes have similar structure (hillslopes and channels) across different scales regardless of variations in drivers and controls. The relative magnitude of diffusive erosion to advective erosion ( D/K ratio) in a landscape development model controls hillslope length, shape, and drainage density, which regulate soil moisture variation, one of the critical resources of plants, through the contributing area ( A ) and local slope ( S ) represented by a topographic index (TI). Here we explore the theoretical relation between geomorphic processes, TI, and the abundance and distribution of plants. We derived an analytical model that expresses the TI with D, K , and A . This gives us the relation between soil moisture variation and geomorphic processes. Plant tolerance curves are used to link plant performance to soil moisture. Using the hypothetical tolerance curves of three plants, we show that the abundance and distribution of xeric, mesic, and hydric plants on the landscape are regulated by the D/K ratio. Where diffusive erosion is the major erosion process (large D/K ratio), mesic plants have higher abundance relative to xeric and hydric plants and the landscape has longer and convex-upward hillslope and low channel density. Finally, increasing the dominance of advective erosion increases relative abundance of xeric and hydric plants dominance, and the landscape has short and concave hillslope and high channel density.

59 BASIC BIOLOGICAL SCIENCES↗