SEARCH · Search NASA

Results for “Dynamic Line Rating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Mechanotransduction and the functional response of bone to mechanical strain

Mechanotransduction plays a crucial role in the physiology of many tissues including bone. Mechanical loading can inhibit bone resorption and increase bone formation in vivo. In bone, the process of mechanotransduction can be divided into four distinct steps: (1) mechanocoupling, (2) biochemical coupling, (3) transmission of signal, and (4) effector cell response. In mechanocoupling, mechanical loads in vivo cause deformations in bone that stretch bone cells within and lining the bone matrix and create fluid movement within the canaliculae of bone. Dynamic loading, which is associated with extracellular fluid flow and the creation of streaming potentials within bone, is most effective for stimulating new bone formation in vivo. Bone cells in vitro are stimulated to produce second messengers when exposed to fluid flow or mechanical stretch. In biochemical coupling, the possible mechanisms for the coupling of cell-level mechanical signals into intracellular biochemical signals include force transduction through the integrin-cytoskeleton-nuclear matrix structure, stretch-activated cation channels within the cell membrane, G protein-dependent pathways, and linkage between the cytoskeleton and the phospholipase C or phospholipase A pathways. The tight interaction of each of these pathways would suggest that the entire cell is a mechanosensor and there are many different pathways available for the transduction of a mechanical signal. In the transmission of signal, osteoblasts, osteocytes, and bone lining cells may act as sensors of mechanical signals and may communicate the signal through cell processes connected by gap junctions. These cells also produce paracrine factors that may signal osteoprogenitors to differentiate into osteoblasts and attach to the bone surface. Insulin-like growth factors and prostaglandins are possible candidates for intermediaries in signal transduction. In the effector cell response, the effects of mechanical loading are dependent upon the magnitude, duration, and rate of the applied load. Longer duration, lower amplitude loading has the same effect on bone formation as loads with short duration and high amplitude. Loading must be cyclic to stimulate new bone formation. Aging greatly reduces the osteogenic effects of mechanical loading in vivo. Also, some hormones may interact with local mechanical signals to change the sensitivity of the sensor or effector cells to mechanical load.

Non-NASA Center↗

DOE OSTI2017

Delayed or No Feedback? Gas Outflows in Type 2 AGNs. III

We present gas kinematics based on the [O iii] λ 5007 line and their connection to galaxy gravitational potential, active galactic nucleus (AGN) energetics, and star formation, using a large sample of ∼110,000 AGNs and star-forming (SF) galaxies at z < 0.3. Gas and stellar velocity dispersions are comparable to each other in SF galaxies, indicating that the ionized gas kinematics can be accounted by the gravitational potential of host galaxies. In contrast, AGNs clearly show non-gravitational kinematics, which is comparable to or stronger than the virial motion caused by the gravitational potential. The [O iii] velocity–velocity dispersion (VVD) diagram dramatically expands toward high values as a function of AGN luminosity, implying that the outflows are AGN-driven, while SF galaxies do not show such a trend. We find that the fraction of AGNs with a signature of outflow kinematics, steeply increases with AGN luminosity and Eddington ratio. In particular, the majority of luminous AGNs presents strong non-gravitational kinematics in the [O iii] profile. AGNs with strong outflow signatures show on average similar specific star formation rates (sSFRs) to those of star-forming galaxies. In contrast, AGNs with weak or no outflows have an order of magnitude lower sSFRs, suggesting that AGNs with current strong outflows do now show any negative AGN feedback and that it may take dynamical time to impact on star formation over galactic scales.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1997

Active Microwave Remote Sensing Observations of Weddell Sea Ice

Since July 1991, the European Space Agency's ERS-1 and ERS-2 satellites have acquired radar data of the Weddell Sea, Antarctica. The Active Microwave Instrument on board ERS has two modes; SAR and Scatterometer. Two receiving stations enable direct downlink and recording of high bit-rate, high resolution SAR image data of this region. When not in an imaging mode, when direct SAR downlink is not possible, or when a receiving station is inoperable, the latter mode allows normalized radar cross-section data to be acquired. These low bit-rate ERS scatterometer data are tape recorded, downlinked and processed off-line. Recent advances in image generation from Scatterometer backscatter measurements enable complementary medium-scale resolution images to be made during periods when SAR images cannot be acquired. Together, these combined C-band microwave image data have for the first time enabled uninterrupted night and day coverage of the Weddell Sea region at both high (25 m) and medium-scale (-20 km) resolutions. C-band ERS-1 radar data are analyzed in conjunction with field data from two simultaneous field experiments in 1992. Satellite radar signature data are compared with shipborne radar data to extract a regional and seasonal signature database for recognition of ice types in the images. Performance of automated sea-ice tracking algorithms is tested on Antarctic data to evaluate their success. Examples demonstrate that both winter and summer ice can be effectively tracked. The kinematics of the main ice zones within the Weddell Sea are illustrated, together with the complementary time-dependencies in their radar signatures. Time-series of satellite images are used to illustrate the development of the Weddell Sea ice cover from its austral summer minimum (February) to its winter maximum (September). The combination of time-dependent microwave signatures and ice dynamics tracking enable various drift regimes to be defined which relate closely to the circulation of the sea ice in response to current and wind forcing and iceberg barriers. These are closely related to continental-shelf or central basin regimes, in which tidal forcing or barotropic circulation patterns appear to influence the sea-ice motion, respectively. These regimes provide valuable information about the regions of most prolific ice growth and influence of ice conditions upon air-sea-ice exchange processes in the Weddell Sea.

Drinkwater, Mark R.↗

NASA NTRS2020

A strongly changing accretion morphology during the outburst decay of the neutron star x-ray binary 4U 1608-52

It is commonly assumed that the properties and geometry of the accretion flow in transient low-mass X-ray binaries (LMXBs) significantly change when the X-ray luminosity decays below ∼10−2 of the Eddington limit (LEdd). However, there are few observational cases where the evolution of the accretion flow is tracked in a single X-ray binary over a wide dynamic range. In this work, we use NuSTAR and NICER observations obtained during the 2018 accretion outburst of the neutron star LMXB 4U 1608−52, to study changes in the reflection spectrum. We find that the broad Fe–Kα line and Compton hump, clearly seen during the peak of the outburst when the X-ray luminosity is ∼1037 erg s−1 (∼0.05 LEdd), disappear during the decay of the outburst when the source luminosity drops to ∼4.5 × 1035 erg s−1 (∼0.002 LEdd). We show that this non-detection of the reflection features cannot be explained by the lower signal-to-noise ratio at lower flux, but is instead caused by physical changes in the accretion flow. Simulating synthetic NuSTAR observations on a grid of inner disc radius, disc ionization, and reflection fraction, we find that the disappearance of the reflection features can be explained by either increased disc ionization (log ξ 4.1) or a much decreased reflection fraction. A changing disc truncation alone, however, cannot account for the lack of reprocessed Fe–Kα emission. The required increase in ionization parameter could occur if the inner accretion flow evaporates from a thin disc into a geometrically thicker flow, such as the commonly assumed formation of a radiatively inefficient accretion flow at lower mass accretion rates.

J. van den Eijnden↗

DOE OSTI2019

Resolved Molecular Gas and Star Formation Properties of the Strongly Lensed z = 2.26 Galaxy SDSS J0901+1814

We present ~1'' resolution (~2 kpc in the source plane) observations of the CO (1–0), CO (3–2), Hα, and [N II ] lines in the strongly lensed z = 2.26 star-forming galaxy SDSS J0901+1814. We use these observations to constrain the lensing potential of a foreground group of galaxies, and our source-plane reconstructions indicate that SDSS J0901+1814 is a nearly face-on (i ≈ 30°) massive disk with r 1/2 ≳ 4 kpc for its molecular gas. Using our new magnification factors (μ tot ≈ 30), we find that SDSS J0901+1814 has a star formation rate (SFR) of ${268}_{-61}^{+63}\,{M}_{\odot }\,{\mathrm{yr}}^{-1}$, ${M}_{\mathrm{gas}}=({1.6}_{-0.2}^{+0.3})\times {10}^{11}({\alpha }_{\mathrm{CO}}/4.6)\,{M}_{\odot }$, and ${M}_{\star }=({9.5}_{-2.8}^{+3.8})\times {10}^{10}\,{M}_{\odot }$, which places it on the star-forming galaxy "main sequence." We use our matched high angular resolution gas and SFR tracers (CO and Hα, respectively) to perform a spatially resolved (pixel-by-pixel) analysis of SDSS J0901+1814 in terms of the Schmidt–Kennicutt relation. After correcting for the large fraction of obscured star formation (${\mathrm{SFR}}_{{\rm{H}}\alpha }/{\mathrm{SFR}}_{\mathrm{TIR}}={0.054}_{-0.014}^{+0.015}$), we find that SDSS J0901+1814 is offset from "normal" star-forming galaxies to higher star formation efficiencies independent of assumptions for the CO-to-H 2 conversion factor. Our mean best-fit index for the Schmidt–Kennicutt relation for SDSS J0901+1814, evaluated with different CO lines and smoothing levels, is $\bar{n}=1.54\pm 0.13;$ however, the index may be affected by gravitational lensing, and we find $\bar{n}=1.24\pm 0.02$ when analyzing the source-plane reconstructions. While the Schmidt–Kennicutt index largely appears unaffected by which of the two CO transitions we use to trace the molecular gas, the source-plane reconstructions and dynamical modeling suggest that the CO (1–0) emission is more spatially extended than the CO (3–2) emission.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2015

Solid Rocket Motor Combustion Instability Modeling in COMSOL Multiphysics

Combustion instability modeling of Solid Rocket Motors (SRM) remains a topic of active research. Many rockets display violent fluctuations in pressure, velocity, and temperature originating from the complex interactions between the combustion process, acoustics, and steady-state gas dynamics. Recent advances in defining the energy transport of disturbances within steady flow-fields have been applied by combustion stability modelers to improve the analysis framework [1, 2, 3]. Employing this more accurate global energy balance requires a higher fidelity model of the SRM flow-field and acoustic mode shapes. The current industry standard analysis tool utilizes a one dimensional analysis of the time dependent fluid dynamics along with a quasi-three dimensional propellant grain regression model to determine the SRM ballistics. The code then couples with another application that calculates the eigenvalues of the one dimensional homogenous wave equation. The mean flow parameters and acoustic normal modes are coupled to evaluate the stability theory developed and popularized by Culick [4, 5]. The assumption of a linear, non-dissipative wave in a quiescent fluid remains valid while acoustic amplitudes are small and local gas velocities stay below Mach 0.2. The current study employs the COMSOL multiphysics finite element framework to model the steady flow-field parameters and acoustic normal modes of a generic SRM. The study requires one way coupling of the CFD High Mach Number Flow (HMNF) and mathematics module. The HMNF module evaluates the gas flow inside of a SRM using St. Robert's law to model the solid propellant burn rate, no slip boundary conditions, and the hybrid outflow condition. Results from the HMNF model are verified by comparing the pertinent ballistics parameters with the industry standard code outputs (i.e. pressure drop, thrust, ect.). These results are then used by the coefficient form of the mathematics module to determine the complex eigenvalues of the Acoustic Velocity Potential Equation (AVPE). The mathematics model is truncated at the nozzle sonic line, where a zero flux boundary condition is self-satisfying. The remaining boundaries are modeled with a zero flux boundary condition, assuming zero acoustic absorption on all surfaces. The results of the steady-state CFD and AVPE analyses are used to calculate the linear acoustic growth rate as is defined by Flandro and Jacob [2, 3]. In order to verify the process implemented within COMSOL we first employ the Culick theory and compare the results with the industry standard. After the process is verified, the Flandro/Jacob energy balance theory is employed and results displayed.

Fischbach, Sean R.↗

DOE OSTI2021

Charge Transfer and Spin Dynamics in a Zinc Porphyrin Donor Covalently Linked to One or Two Naphthalenediimide Acceptors

We report quantum coherence effects on charge transfer and spin dynamics in a system having two degenerate electron acceptors are studied using a zinc 5,10,15-tri(n-pentyI)-20-phenylporphyrin (ZnP) electron donor covalently linked to either one or two naphthalene-1,8:4,5-bis(dicarboximide) (NDI) electron acceptors using an anthracene (An) spacer, ZnP-An-NDI (1) and ZnP-An-NDI 2 (2), respectively. Following photoexcitation of 1 and 2 in toluene at 295 K, femtosecond transient absorption spectroscopy shows that the electron transfer (ET) rate constant for 2 is about three times larger than that of 1, which can be accounted for by the statistical nature of incoherent ET as well as the electron couplings for the charge separation reactions. In contrast, the rate constant for charge recombination (CR) of 1 is about 25% faster than that of 2. Using femtosecond transient infrared spectroscopy and theoretical analysis, we find that the electron on NDI 2 ∙- in 2 localizes onto one of the two NDIs prior to CR, thus precluding electronically coherent CR from NDI 2 ∙- . Conversely, CR in both 1 and 2 is spin coherent as indicated by the observation of a resonance in the 3* ZnP yield following CR as a function of applied magnetic field, giving spin-spin exchange interaction energies of 2J = 210 and 236 mT, respectively, where the line width of the resonance for 2 is greater than 1. These data show that while CR is a spin-coherent process, incoherent hopping of the electron between the two NDIs in 2, consistent with the lack of delocalization noted above, results in greater spin decoherence in 2 relative to 1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1994

The kinetics and dynamics of the coma of Halley's comet

This grant to the University of Michigan supported the efforts of Michael R. Combi to serve as a co-investigator in collaboration with a larger effort by the principal investigator, William Smyth of Atmospheric and Environmental Research, Inc. The overall objective of this project was to analyze in a self-consistent manner unique optical O((sup 1)D) and NH2 ultra-high resolution line profile data of excellent quality and other supporting lower-resolution spectral data for the coma of comet P/Halley by using highly developed and physically-based cometary coma models in order to determine and explain in terms of physical processes the actual dynamics and photochemical kinetics that occur in the coma. The justification for this work is that it provides a valuable and underlying physical base from which to interpret significantly different types of coma observations in a self-consistent manner and hence bring into agreement (or avoid) apparent inconsistencies that arise from non-physically based interpretations. The level of effort for the Michigan component amounted to less than three person-months over a planned period of three years. The period had been extended at no extra cost to four years because the Michigan grant and the AER contract did not have coincident time periods. An effort of somewhat larger scope was undertaken by the PI. The importance of the O((sup 1)D) profiles is that they provide a direct trace of the water distribution in comets. The line profile shape is produced by the convolution of the outflow velocity and thermal dispersion of the parent water molecules with the photokinetic ejection of the oxygen atoms upon photodissociation of the parent water molecules. Our understanding of the NH2 and its precursor ammonia are important for comet-to-comet composition variations as they relate to the cosmo-chemistry of the early solar nebula. Modeling of the distribution of NH2 is necessary in order to infer the ammonia production rates from NH2 observations.

Combi, Michael R.↗

DOE OSTI2025

Computational Fluid Dynamics-Based Modeling of Methane Flows Around Oil and Gas Equipment

Recent studies estimate that emissions from oil and gas production facilities contribute between 20 and 50% of the total methane ( CH 4 ) emitted in the US; therefore, quantifying and reducing these emissions are crucial for achieving climate goals. Methane quantification depends on both measuring methane concentrations and converting them to emissions through a modeling framework. Currently, simple atmospheric dispersion models are primarily used to quantify emissions and concentrations, but these estimates are highly uncertain when quantifying emissions from complex aerodynamic sources, such as oil and gas facilities. This investigation used a CFD modeling approach, which can account for aerodynamic complexity but has hitherto not been used to model methane concentrations downwind of a methane release of a known rate, and compared it against in situ measurements. High-time-resolution (1 Hz) methane concentration and meteorological data were measured during experiments conducted at the METEC on 21 March and 11 July 2024. The METEC site configuration, measured wind data, and controlled emission rates were used as input for the CONVERGE CFD model to model downwind CH 4 concentration. The modeling was carried out between 20 and 70 m, from two different points of release in two separate controlled-release experiments, one from a separator and another from a wellhead. In these experiments, we found that the CFD model could predict the CH 4 concentrations downwind of the release to a good degree. The model was evaluated on multiple metrics to assess its performance in estimating methane concentrations at typical fence line distances (∼30 m). These results help us to understand external flows and the ability of CFD models to predict downwind concentrations in aerodynamically complex environments.

03 NATURAL GAS↗

DOE OSTI2023

Demonstration of Microwave Cavity Transducer Performance in High Temperature Fluid Flow Sensing: Development of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer. We have performed a preliminary proof-of-principle test of flow sensing in high temperature liquid sodium in environment, which is similar to that of an advanced reactor. The liquid sodium setup consists of a cylindrical vessel with a center feed line, where a transducer inserted through the top cap of the vessel measures velocity of the impinging liquid jet. For this test, we have developed a cylindrical resonator, which was machined from stainless steel 316 and electroplated with silver on the interior surfaces. Outer diameter of the cylindrical cavity is approximately 3cm, and the thin wall is approximately 200µm thick. We have also developed and insertion probe consisting of a 50cm WR-42 brass waveguide enclosed in a protective SS316 tube. The cavity was excited through a WR-42 waveguide through a subwavelength hole on the side of the wall of the cylinder in the TE 011 mode with resonant frequency f ≈ 17.8GHz. As a calibration experiment, we have assembled a water vessel with a center feed, and with dimensions similar to those of the liquid sodium setup. Frequency shift of the cavity spectral response was obtained at room temperature and ambient pressure by gradually increasing water flow rate from 0 to 25GPM (gallons per minute). Corresponding monotonic increase of resonant frequency by several hundred KHz was observed. Next, a sodium flow rate sensing study was performed in a liquid sodium vessel at 340° C temperature and ambient pressure. The flow rate was changed by varying sodium pump power, and a frequency shift of several hundred KHz was observed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Revealing the Predominant Surface Facets of Rough Cu Electrodes under Electrochemical Conditions

Metal electrodes with rough surfaces are frequently found to convert CO or CO 2 to hydrocarbons and oxygenates with high selectivity and at high reaction rates in comparison with their smooth counterparts. The atomic-level morphology of a rough electrode is likely one key factor responsible for its comparatively high catalytic selectivity and activity. However, few methods are capable of probing the atomic-level structure of rough metal electrodes under electrocatalytic conditions. As a result, the nuances in the atomic-level surface morphology that control the catalytic characteristics of these electrodes have remained largely unexplored. Because the C≡O stretching frequency of atop-bound CO (CO atop ) depends on the coordination of the underlying metal atom, the IR spectrum of this reaction intermediate on the copper electrode could, in principle, provide structural information about the catalytic surface during electrolysis. However, other effects, such as dynamic dipole coupling, easily obscure the dependence of the frequency on the surface morphology. Further, in the limit of low CO atop coverage, where coupling effects are small, the C≡O stretching frequencies of CO atop on Cu(111) and Cu(100) facets are virtually identical. Therefore, on the basis of the C≡O stretching frequency, it is not straightforward to distinguish between these two ubiquitous surface facets, which exhibit vastly different CO reduction activities. Herein, we show that key features of the atomic-level surface morphology of rough copper electrodes can be inferred from the potential dependence of the line shape of the C≡O stretching band of CO atop . Specifically, we compared two types of rough copper thin-film electrodes that are routinely employed in the context of surface-enhanced infrared absorption spectroscopy (SEIRAS). We found that copper films that are electrochemically deposited on Si-supported Au films (CuAu–Si) are poor catalysts for the reduction of CO to ethylene in comparison to copper films (Cu–Si) that are electrolessly deposited onto Si crystals. As quantified by differential electrochemical mass spectrometry (DEMS), the onset potential for ethylene is ~200 ± 65 mV more cathodic for CuAu–Si than that for Cu–Si. To reveal the origin of the disparate catalytic properties of Cu–Si and CuAu–Si, we probed the surfaces of the electrodes with cyclic voltammetry (CV) and SEIRAS. The CV characterization suggests that the (111) surface facet predominates on CuAu–Si, whereas the (100) facet is more common on Cu–Si. SEIRAS reveals that the line shape of the C≡O stretching of CO atop is composed of two bands that are attributable to CO atop on terrace and defect sites. The different surface structures manifest themselves in the form of starkly different potential dependences of the line shape of the C≡O stretching mode of CO atop on the two types of electrodes. With a simple Boltzmann model that considers the different adsorption energies of CO atop on terrace and defect sites, and the resulting CO atop populations on terrace and defect sites, we deduced that the observed electrode-specific potential dependence of the line shape is consistent with the presence of different predominant terrace sites on the two types of films. This strategy for assessing the atomic-level morphology is not restricted to SEIRAS but could also be applied to the C≡O stretching bands recorded with surface-enhanced Raman spectroscopy (SERS), which is suitable for probing a wide range of rough copper electrodes. Therefore, with this work, we establish the potential dependence of the C≡O stretching band of CO atop as a probe of the atomic-level surface structure of rough metal electrodes under electrochemical conditions. When it is coupled with complementary techniques, this methodology provides essential structural information for further improvement in the reaction selectivity of rough metal electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Development of Control System Functional Capabilities within the IES Plug-and-Play Simulation Environment

The concept of an Integrated Energy System (IES) is meant to combine different energy technologies in synergistic ways to achieve a more secure and economical energy supply. The RAVEN-based HYBRID framework is used to find the optimal installed capacity and the optimal economical dispatch of each component of the IES. A new RAVEN (Risk Analysis Virtual ENvironment) plugin for grid and capacity optimization (HERON) has been developed for optimizing the production variables of the IES given the demand profile. Currently, only the limits that affect the production variables and their corresponding time rates of change are considered (explicit constraints). However, other variables are additionally subject to constraints, but the associated limits are not accounted for (implicit constraints). In particular, for the power dispatch problem, the optimization algorithm takes into account the limits on the electrical power output and the corresponding hourly power variations but does not consider other constraints on process variables whose response effects the service life of the IES. This report describes a scheme that allows accounting for implicit constraints without increasing the size of the optimization problem. The Reference Governor (RG) algorithm is traditionally used for enforcing state and control constraints by modifying the set-point trajectories supplied to the feedback regulators. In our application, the RG is coupled within an iterative loop with the HERON-power dispatcher to generate optimal trajectories that ensure the operational constraints are met. A data-driven procedure to derive a representation of the dynamics of the controlled system was developed. First, the variables that represented the state of the system are selected (PCA-based approach), and then state-space representation matrices are derived from the collected measurements (DMDc algorithm). A preliminary version of the developed workflow based on Linear Time Invariant matrices was assessed by adopting a two-unit test case. More sophisticated versions of this workflow foreseeing the on-line derivation of system matrices will be deployed in FY 2021. Finally, a “plug-and-play” library of controllers and state observers was developed in Dymola. Some aspects of the current configuration of the IES unit components, e.g., the encapsulation of the control schemes into dedicated blocks, are consistent with the “plug-and-play” philosophy. Other features, e.g., the system buses collecting the input and the output variables, are not. For this reason, once listed and described the limits of the current configuration, necessary modifications to the plant model interface are presented. As a test-case, the interfaces of the SES model in the RAVEN-based HYBRID framework were reworked accordingly, and two different control schemes were applied to the same plant model.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2014

Submillimeter array and very large array observations in the hypercompact H II region G35.58-0.03

The formation of hypercompact (HC) H II regions is an important stage in massive star formation. Spectral line and continuum observations can explore its dynamic conditions. We present high angular resolution observations carried out with the Submillimeter Array (SMA) and the Very Large Array (VLA) toward the HC H II region G35.58-0.03. With the 1.3 mm SMA and 1.3 cm VLA, we detected a total of about 25 transitions of 8 different species and their isotopologues (CO, CH{sub 3}CN, SO{sub 2}, CH{sub 3}CCH, OCS, CS, H, and NH{sub 3}). G35.58-0.03 consists of an HC H II core with electron temperature T{sub e}{sup ∗}≧5500 K, emission measure EM ≈1.9 × 10{sup 9} pc cm{sup –6}, local volume electron density n{sub e} = 3.3 × 10{sup 5} cm{sup –3}, and a same width of radio recombination line FWHM ≈ 43.2 km s{sup –1} for both H30α and H38β at its intrinsic core size ∼3714 AU. The H30α line shows evidence of an ionized outflow driving a molecular outflow. Based on the derived Lyman continuum flux, there should be an early-type star equivalent to O6.5 located inside the H II region. From the continuum spectral energy distribution from 3.6 cm, 2.0 cm, 1.3 cm, 1.3 mm and 0.85 mm to 0.45 mm, we distinguished the free-free emission (25% ∼ 55%) from the warm dust component (75% ∼ 45%) at 1.3 mm. The molecular envelope shows evidence of infall and outflow with an infall rate of 0.05 M {sub ☉} yr{sup –1} and a mass loss rate of 5.2 × 10{sup –3} M {sub ☉} yr{sup –1}. The derived momentum (∼0.05 M {sub ☉} km s{sup –1}) is consistent between the infalling and outflowing gas per year. It is suggested that the infall is predominant and the envelope mass of dense core is increasing rapidly, but the accretion in the inner part might already be halted.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2005

Mass Changes of the Greenland and Antarctic Ice Sheets and Shelves and Contributions to Sea-level Rise: 1992-2002

Changes in ice mass are estimated from elevation changes derived from 10.5 years (Greenland) and 9 years (Antarctica) of satellite radar altimetry data from the European Remote-sensing Satellites ERS-1 and -2. For the first time, the dH/dt values are adjusted for changes in surface elevation resulting from temperature-driven variations in the rate of fun compaction. The Greenland ice sheet is thinning at the margins (-42 plus or minus 2 Gta(sup -1) below the equilibrium line altitude (ELA)) and growing inland (+53 plus or minus 2 Gt a(sup -1)above the ELA) with a small overall mass gain (+11 plus or minus 3 Gt a(sup -1); -0.03 mm a(sup -1) SLE (sea level equivalent)). The ice sheet in West Antarctica (WA) is losing mass (-47 (dot) 4 GT a(sup -1) and the ice sheet in East Antarctica (EA) shows a small mass gain (+16 plus or minus 11 Gt a(sup -1) for a combined net change of -31 plus or minus 12 Gt a(sup -1) (+0.08 mm a(sup -1) SLE)). The contribution of the three ice sheets to sea level is +0.05 plus or minus 0.03 mm a(sup -1). The Antarctic ice shelves show corresponding mass changes of -95 (dot) 11 Gt a(sup -1) in WA and +142 plus or minus 10 Gt a(sup -1) in EA. Thinning at the margins of the Greenland ice sheet and growth at higher elevations is an expected response to increasing temperatures and precipitation in a warming climate. The marked thinnings in the Pine Island and Thwaites Glacier basins of WA and the Totten Glacier basin in EA are probably ice-dynamic responses to long-term climate change and perhaps past removal of their adjacent ice shelves. The ice growth in the southern Antarctic Peninsula and parts of EA may be due to increasing precipitation during the last century.

Zwally, H. Jay↗

DOE OSTI2013

Mg II ABSORPTION AT 2 < z < 6 WITH MAGELLAN/FIRE. II. A LONGITUDINAL STUDY OF H I, METALS, AND IONIZATION IN GALACTIC HALOS

We present a detailed study of H I and metals for 110 Mg II absorption systems discovered at 1.98 {<=} z {<=} 5.33 in the infrared spectra of high-redshift QSOs. Using new measurements of rest-frame UV lines from optical spectra of the same targets, we compare the high-redshift sample with carefully constructed low-redshift control samples from the literature to study evolutionary trends from z = 0 {yields} 5.33 (>12 Gyr). We observe a significant strengthening in the characteristic N(H I) for fixed Mg II equivalent width as one moves toward higher redshift. Indeed, at our sample's mean z-bar = 3.402, all Mg II systems are either damped Ly{alpha} absorbers (DLAs) or sub-DLAs, with 40.7% of systems exceeding the DLA threshold (compared to 16.7% at z-bar = 0.927). We set lower limits on the metallicity of the Mg II systems where we can measure H I; these results are consistent with the full DLA population. The classical Mg II systems (W {sup {lambda}2796} {sub 0} = 0.3-1.0 A), which preferentially associate with sub-DLAs, are quite metal rich at {approx}0.1 solar. We applied quantitative classification metrics to our absorbers to compare with low-redshift populations, finding that weak systems are similar to classic Mg II absorbers at low redshift. The strong systems either have very large Mg II and Fe II velocity spreads implying non-virialized dynamics or are more quiescent DLAs. There is tentative evidence that the kinetically complex systems evolve in similar fashion to the global star formation rate. We speculate that if weaker Mg II systems represent accreting gas as suggested by recent studies of galaxy-absorber inclinations, then their high metal abundance suggests re-accretion of recently ejected material rather than first-time infall from the metal-poor intergalactic medium, even at early times.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Effects of canopy midstory management and fuel moisture on wildfire behavior

Abstract Increasing trends in wildfire severity can partly be attributed to fire exclusion in the past century which led to higher fuel accumulation. Mechanical thinning and prescribed burns are effective techniques to manage fuel loads and to establish a higher degree of control over future fire risk, while restoring fire prone landscapes to their natural states of succession. However, given the complexity of interactions between fine scale fuel heterogeneity and wind, it is difficult to assess the success of thinning operations and prescribed burns. The present work addresses this issue systematically by simulating a simple fire line and propagating through a vegetative environment where the midstory has been cleared in different degrees, leading to a canopy with almost no midstory, another with a sparse midstory and another with a dense midstory. The simulations are conducted for these three canopies under two different conditions, where the fuel moisture is high and where it is low. These six sets of simulations show widely different fire behavior, in terms of fire intensity, spread rate and consumption. To understand the physical mechanisms that lead to these differences, detailed analyses are conducted to look at wind patterns, mean flow and turbulent fluxes of momentum and energy. The analyses also lead to improved understanding of processes leading to high intensity crowning behavior in presence of a dense midstory. Moreover, this work highlights the importance of considering fine scale fuel heterogeneity, seasonality, wind effects and the associated fire-canopy-atmosphere interactions while considering prescribed burns and forest management operations.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1993

Adaptive laser link reconfiguration using constraint propagation

This paper describes Harris AI research performed on the Adaptive Link Reconfiguration (ALR) study for Rome Lab, and focuses on the application of constraint propagation to the problem of link reconfiguration for the proposed space based Strategic Defense System (SDS) Brilliant Pebbles (BP) communications system. According to the concept of operations at the time of the study, laser communications will exist between BP's and to ground entry points. Long-term links typical of RF transmission will not exist. This study addressed an initial implementation of BP's based on the Global Protection Against Limited Strikes (GPALS) SDI mission. The number of satellites and rings studied was representative of this problem. An orbital dynamics program was used to generate line-of-site data for the modeled architecture. This was input into a discrete event simulation implemented in the Harris developed COnstraint Propagation Expert System (COPES) Shell, developed initially on the Rome Lab BM/C3 study. Using a model of the network and several heuristics, the COPES shell was used to develop the Heuristic Adaptive Link Ordering (HALO) Algorithm to rank and order potential laser links according to probability of communication. A reduced set of links based on this ranking would then be used by a routing algorithm to select the next hop. This paper includes an overview of Constraint Propagation as an Artificial Intelligence technique and its embodiment in the COPES shell. It describes the design and implementation of both the simulation of the GPALS BP network and the HALO algorithm in COPES. This is described using a 59 Data Flow Diagram, State Transition Diagrams, and Structured English PDL. It describes a laser communications model and the heuristics involved in rank-ordering the potential communication links. The generation of simulation data is described along with its interface via COPES to the Harris developed View Net graphical tool for visual analysis of communications networks. Conclusions are presented, including a graphical analysis of results depicting the ordered set of links versus the set of all possible links based on the computed Bit Error Rate (BER). Finally, future research is discussed which includes enhancements to the HALO algorithm, network simulation, and the addition of an intelligent routing algorithm for BP.

Crone, M. S.↗

NASA NTRS2006

The Sloan Lens ACS Survey. I. A Large Spectroscopically Selected Sample of Massive Early-Type Lens Galaxies

The Sloan Lens ACS (SLACS) Survey is an efficient Hubble Space Telescope (HST) Snapshot imaging survey for new galaxy-scale strong gravitational lenses. The targeted lens candidates are selected spectroscopically from the Sloan Digital Sky Survey (SDSS) database of galaxy spectra for having multiple nebular emission lines at a redshift significantly higher than that of the SDSS target galaxy. The SLACS survey is optimized to detect bright early-type lens galaxies with faint lensed sources in order to increase the sample of known gravitational lenses suitable for detailed lensing, photometric, and dynamical modeling. In this paper, the first in a series on the current results of our HST Cycle 13 imaging survey, we present a catalog of 19 newly discovered gravitational lenses, along with nine other observed candidate systems that are either possible lenses, nonlenses, or nondetections. The survey efficiency is thus >=68%. We also present Gemini 8 m and Magellan 6.5 m integral-field spectroscopic data for nine of the SLACS targets, which further support the lensing interpretation. A new method for the effective subtraction of foreground galaxy images to reveal faint background features is presented. We show that the SLACS lens galaxies have colors and ellipticities typical of the spectroscopic parent sample from which they are drawn (SDSS luminous red galaxies and quiescent MAIN sample galaxies), but are somewhat brighter and more centrally concentrated. Several explanations for the latter bias are suggested. The SLACS survey provides the first statistically significant and homogeneously selected sample of bright early-type lens galaxies, furnishing a powerful probe of the structure of early-type galaxies within the half-light radius. The high confirmation rate of lenses in the SLACS survey suggests consideration of spectroscopic lens discovery as an explicit science goal of future spectroscopic galaxy surveys.

galaxies↗