Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Benefits of Dual Fuel Heat Pump Grid-responsive Control: A Model-based Control Optimization Approach Using Building and Equipment Co-simulation

Conventional dual fuel heat pumps lack the intelligent control mechanisms to efficiently manage the switch between heat pump and furnace, leading to sub-optimal energy usage and, in some cases, increased operating costs. To resolve this gap, this study applies optimized control on hybrid heat pumps. With a focus on equipment control strategies, we compare the performances of five spacing heating equipment, including a conventional heat pump (HP), a conventional furnace, a dual fuel heat pump (DFHP) with conventional control, a dual fuel heat pump with smart control, and a novel seamlessly fuel flexible heat pump (SFFHP). While DFHP runs on either gas or electricity at any given moment, SFFHP concurrently consumes gas and electricity by continuously optimizing the proportion of each. In this research, a co-simulation framework is developed by integrating a building envelope model with a physics-based heat pump simulation model to analyze the benefits of grid-responsive controls of DFHP and SFFHP. The model-based optimal controls adjust the operation of the heat pump and gas furnace based on utility price signals and marginal grid emission to minimize utility cost and CO 2 emissions for multiple climate zones, different utility tariffs, and marginal grid emission scenarios. Case studies in Chicago and Los Angeles demonstrate that SFFHP and DFHP, with model-based optimal control, can deliver significant reductions in peak demand, utility cost, and CO 2 emission. In Chicago, SFFHP and smart controlled DFHP yield up to 64.7% and 61.7% utility cost reduction and up to 15.7% and 8.5% CO 2 emission reduction compared to the gas furnace. In Los Angeles, SFFHP and smart controlled DFHP achieve up to 43.6% and 40.1% utility cost reduction and up to 13.8% and 14.1% CO2 emission reduction compared to conventional heat pumps. In conclusion, by leveraging the fuel flexibility nature of dual fuel heat pumps, the model-based control optimization approach makes dual fuel heat pump an attractive option for demand response programs.

Control↗
DOE OSTI2024

Virtual Tokamak for Test and Development of Plasma Control Applied to NSTX-U

Safe and efficient operation of tokamak experiments depends on shot preparation prior to the experiment to maximize performance and avoid issues that are predictable consequences of known physics. The General Atomics TokSys toolbox is used to test and develop the plasma control system (PCS) on numerous tokamaks around the world. Tokamaks that use a version of the DIII-D PCS can connect it to a TokSys simulation and control a virtual version of the tokamak with the real PCS. Recent upgrades to the simulation include more detailed profile and transport modeling to support design and implementation of optimized scenarios. The simulation combines a module called “Profiles” that simulates the 1D profiles of density, pressure, and current and a module called “GSevolve'' that evolves the 2D Grad-Shafranov equilibrium. The “Profiles'' module primarily uses simplified models for fueling, heating, and current. The TRANSP code provides precomputed diffusion coefficients and heating/current drive profiles from radio-frequency and neutral beam sources for the scenarios being simulated. The fidelity of a simulation can be enhanced by analyzing it with TRANSP and making corrections to the precomputed values and iterating until convergence. Simulations of the National Spherical Torus Upgrade (NSTX-U) are presented. It is shown that the simulation reproduces the experimental profile evolution. Here, the simulation has also been upgraded to reproduce the experimental outcome at points of bifurcation. This is demonstrated with a simulation of vertical displacement in NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Human-Building Collaboration: Toward lighting enabled collaborative system design

The profession of lighting design is evolving as contemporary lighting systems increasingly rely on cutting-edge computational technologies, sensors, and IOT systems. This trend requires designers to incorporate ideas of automation, dynamic controls, and user-system interaction into their design logic. However, real-time lighting simulations are constrained by inherent limitations arising from the reductive assumptions inevitably introduced in simulated lighting environments. This raises the question of how can designers account for the discrepancies between simulated and real lighting environments, and how can collaboration between humans and autonomous lighting systems bridge this gap. To address this question, we propose a protocol for designing collaborative interactions between humans and systems. Furthermore, this protocol builds on the Human-Lighting System Interaction Framework and demonstrates how human and system intelligence can be combined to fine-tune lighting qualities in a given space. Our paper shows how interactive lighting systems can customize lighting based on user preferences in real-time and how global lighting configurations can be adjusted over time. Specifically, we demonstrate: a) Human-system collaboration assumptions and goals, as well as how the protocol can be integrated into digitally programmable lighting systems. b) Implementations of collaboration that reveal how system autonomy, performance, and user experience are improved over short and long-term timeframes. c) How lighting design can be enhanced beyond simulation-driven design optimization capacities. The associated affordances and limitations are discussed with respect to existing lighting simulation design frameworks.

autonomous systems↗
DOE OSTI2023

Multiphysics simulations of Self-Regulating performance of an optimized molten metal fuel microreactor design

Advanced microreactors are expected to play an indispensable role in reliable energy solutions for civilian/ military applications in off-grid regions and space applications such as power supplies for Lunar and Mars bases. An innovative fast neutron spectrum heat pipe microreactor (HP-MR) concept was recently proposed with two unique features: molten U-Mn fuel and heat pipes as the heat removal mechanism. The microreactor was designed to be self-regulated, solely relying on reactivity feedbacks from fuel temperature. The reactor design has been further optimized to provide sufficient engineering safety margin and effective heat removal. In this study, the self-regulating performance of the optimized molten metal fuel microreactor was investigated by multi-physics simulations (neutronics, heat-transfer and heat pipe modeling) based on the MOOSE MultiApps system. In conclusion, the responses of the reactor to a series of transient scenarios were simulated to demonstrate the exceptional and inherent safety features of the novel microreactor concept.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2007

Simulation of the Mars Surface Solar Spectra for Optimized Performance of Triple-Junction Solar Cells

The unparalleled success of the Mars Exploration Rovers (MER) powered by GaInP/GaAs/Ge triple-junction solar cells has demonstrated a lifetime for the rovers that exceeded the baseline mission duration by more than a factor of five. This provides confidence in future longer-term solar powered missions on the surface of Mars. However, the solar cells used on the rovers are not optimized for the Mars surface solar spectrum, which is attenuated at shorter wavelengths due to scattering by the dusty atmosphere. The difference between the Mars surface spectrum and the AM0 spectrum increases with solar zenith angle and optical depth. The recent results of a program between JPL and Spectrolab to optimize GaInP/GaAs/Ge solar cells for Mars are presented. Initial characterization focuses on the solar spectrum at 60-degrees zenith angle at an optical depth of 0.5. The 60-degree spectrum is reduced to ~1/6 of the AM0 intensity and is further reduced in the blue portion of the spectrum. JPL has modeled the Mars surface solar spectra, modified an X-25 solar simulator, and completed testing of Mars-optimized solar cells previously developed by Spectrolab with the modified X-25 solar simulator. Spectrolab has focused on the optimization of the higher efficiency Ultra Triple-Junction (UTJ) solar cell for Mars. The attenuated blue portion of the spectrum requires the modification of the top sub-cell in the GaInP/GaAs/Ge solar cell for improved current balancing in the triple-junction cell. Initial characterization confirms the predicted increase in power and current matched operation for the Mars surface 60-degree zenith angle solar spectrum.

Edmondson, Kenneth M.↗
DOE OSTI2022

Optimizing the shape of photometric redshift distributions with clustering cross-correlations

We present an optimization method for the assignment of photometric galaxies to a chosen set of redshift bins. This is achieved by combining simulated annealing, an optimization algorithm inspired by solid-state physics, with an unsupervised machine learning method, a self-organizing map (SOM) of the observed colours of galaxies. Starting with a sample of galaxies that is divided into redshift bins based on a photometric redshift point estimate, the simulated annealing algorithm repeatedly reassigns SOM-selected subsamples of galaxies, which are close in colour, to alternative redshift bins. We optimize the clustering cross-correlation signal between photometric galaxies and a reference sample of galaxies with well-calibrated redshifts. Depending on the effect on the clustering signal, the reassignment is either accepted or rejected. By dynamically increasing the resolution of the SOM, the algorithm eventually converges to a solution that minimizes the number of mismatched galaxies in each tomographic redshift bin and thus improves the compactness of their corresponding redshift distribution. This method is demonstrated on the synthetic Legacy Survey of Space and Time cosmoDC2 catalogue. We find a significant decrease in the fraction of catastrophic outliers in the redshift distribution in all tomographic bins, most notably in the highest redshift bin with a decrease in the outlier fraction from 57 percent to 16 percent.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Turbomachinery design for Space Shuttle auxiliary power systems.

Review of the major factors affecting Space Shuttle auxiliary power system design decisions, and discussion of turbine aerodynamic design optimization techniques. The working fluid to be used and the vehicle mission requirements are shown to be the two major factors that affect auxiliary power system design decisions. Analytical techniques developed for optimization of turbine aerodynamic design parameters are shown to be applicable to transient-state simulation and design optimization of other components, including the turbine controller.

Burriss, W. L.↗
NASA NTRS2014

Simulation Tool for Dielectric Barrier Discharge Plasma Actuators

Traditional approaches for active flow separation control using dielectric barrier discharge (DBD) plasma actuators are limited to relatively low speed flows and atmospheric conditions. This results in low feasibility of the DBDs for aerospace applications. For active flow control at turbine blades, fixed wings, and rotary wings and on hypersonic vehicles, DBD plasma actuators must perform at a wide range of conditions, including rarified flows and combustion mixtures. An efficient, comprehensive, physically based DBD simulation tool can optimize DBD plasma actuators for different operation conditions. Researchers are developing a DBD plasma actuator simulation tool for a wide range of ambient gas pressures. The tool will treat DBD using either kinetic, fluid, or hybrid models, depending on the DBD operational condition.

Likhanskii, Alexander↗
NASA NTRSDate not supplied

Optimization-Based Parametric Design via High-Fidelity Simulation: Overview + Examples

Design-Build-Test approaches for developing spaceflight hardware are prohibitively time and cost intensive and often lead to suboptimal mechanism designs. Approaches that couple machine learning and high-fidelity physics simulation could eliminate the need for hardware prototyping and dramatically accelerate the engineering design cycle, ultimately reducing cost. This talk presents a modular NASA-developed toolchain to optimize hardware mechanisms in a virtual environment using numerical optimization and multi-body physics simulation and includes example applications related to rigid wheel design for autonomous rovers and computational fluid dynamics.

optimization↗
DOE OSTI2021

Enhanced Data Efficiency Using Deep Neural Networks and Gaussian Processes for Aerodynamic Design Optimization

Adjoint-based optimization methods are attractive for aerodynamic shape design primarily due to their computational costs being independent of the dimensionality of the input space and their ability to generate high-fidelity gradients that can then be used in a gradient-based optimizer. This makes them very well suited for high-fidelity simulation based aerodynamic shape optimization of highly parametrized geometries such as aircraft wings. However, the development of adjoint-based solvers involve careful mathematical treatment and their implementation require detailed software development. Furthermore, they can become prohibitively expensive when multiple optimization problems are being solved, each requiring multiple restarts to circumvent local optima. In this work, we propose a machine learning enabled, surrogate-based framework that replaces the expensive adjoint solver, without compromising on predicting predictive accuracy. Specifically, we first train a deep neural network (DNN) from training data generated from evaluating the high-fidelity simulation model on a model-agnostic design of experiments on the geometry shape parameters. The optimum shape may then be computed by using a gradient-based optimizer coupled with the trained DNN. Subsequently, we also perform a gradient-free Bayesian optimization, where the trained DNN is used as the prior mean. We observe that the latter framework (DNN-BO) improves upon the DNN-only based optimization strategy for the same computational cost. Overall, this framework predicts the true optimum with very high accuracy, while requiring far fewer high-fidelity function calls compared to the adjoint-based method. Furthermore, we show that multiple optimization problems can be solved with the same machine learning model with high accuracy, to amortize the offline costs associated with constructing our models. Our methodology finds applications in the early stages of aerospace design. (C) 2021 Published by Elsevier Masson SAS.

Renganathan, S. Ashwin↗
DOE OSTI2026

Smart Charging of Fleet and Personal Electric Vehicles through Joint Vehicle-to-Grid Optimization

As electric vehicle (EV) adoption accelerates, vehicle-to-grid (V2G) strategies offer advantages over unmanaged charging (V0G) by enhancing grid stability, reducing fleet operation costs, and supporting integration of variable generation resources. This research develops a day-ahead optimization framework linked with agent-based simulations to evaluate coordinated V2G participation by fleet and personal EVs under 5 energy-pricing settings in Austin, Texas. Three scenarios (V0G, fleet-only V2G, and joint-V2G) are examined, considering real-time price and grid profiles, health-damage costs, and operational constraints for both fleet and personal EVs. Results show how V2G scenarios shift fleet EV charging to mid-day while enabling strategic battery-discharge during evening peaks, mitigating grid stress and lowering EV energy costs. V2G delivers close to 80% energy-cost savings for a 2000-EV fleet in Austin on grid-stressed days, with 55% lower charging pollutant outputs. Joint-V2G amplifies system-level benefits by complementing fleet discharge, but smart-charging equipment costs can offset those benefits.

Electric vehicle↗
DOE OSTI2021

Anisotropic colloidal interactions & assembly in AC electric fields

In this work, we match experimental and simulated configurations of anisotropic epoxy colloidal particles in high frequency AC electric fields by identifying analytical potentials for dipole-field and dipole-dipole interactions. We report an inverse Monte Carlo simulation algorithm to determine optimal fits of analytical potentials by matching simulated and experimental distribution functions for non-uniform liquid, liquid crystal, and crystal microstructures in varying amplitude electric fields. Two potentials that include accurate particle volume and dimensions along with a concentration dependent prefactor quantitatively capture experimental observations. At low concentrations, an effective ellipsoidal point dipole potential works well, whereas a novel stretched point dipole potential is found to be suitable at all concentrations, field amplitudes, and degrees of ordering. The simplicity, accuracy, and adjustability of the stretched point dipole potential suggest it can be applied to model field mediated microstructures and assembly of systematically varying anisotropic particle shapes.

42 ENGINEERING↗
NASA NTRS2020

Air Traffic Simulation Technology for High-Population Metroplexes

IAI's MetroSim optimizes air traffic by simulating departures, arrivals, and activity in air and onthe ground in busy metroplexes, where flights impact each other at a single airport and among traffic at nearby airports. MetroSim evolved out of several NASA SBIR/STTR Awards and has since been used by NASA for flight simulation analysis. MetroSim has also been integrated with FAA and DOT technology, has produced studies for the Port Authority of New York and New Jersey, and is under development to support the Navy

Cannon, Kimberly A.↗
DOE OSTI2022

Avoiding excess computation in asynchronous evolutionary algorithms

Abstract Asynchronous evolutionary algorithms are becoming increasingly popular as a means of making full use of many processors while solving computationally expensive search and optimization problems. These algorithms excel at keeping large clusters fully utilized, but may sometimes inefficiently sample an excess of fast‐evaluating solutions at the expense of higher‐quality, slow‐evaluating ones. We have previously introduced a steady‐state parent selection strategy, SWEET (“Selection whilE EvaluaTing”), that sometimes selects individuals that are still being evaluated and allows them to reproduce early. We perform a takeover‐time analysis that confirms that this strategy gives slow‐evaluating individuals that have higher fitnesses an increased ability to multiply in the population. We also find that SWEET appears effective at improving optimization performance on problems in which solution quality is positively correlated with evaluation time. We evaluate our approach on six simulated real‐valued optimization problems and three real‐world applications: an autonomous vehicle controller problem that involves tuning a spiking neural network and two adversarial EA problems. We further evaluate SWEET versus a basic asynchronous process in a simulated setting. We present evidence that SWEET outperforms basic asynchronous processes in a use‐case in which performance is positively correlated with evaluation time, and performs comparably (and often better) than basic asynchronous processes in several use‐cases where performance is negatively correlated with evaluation time. That said, in the cases where performance and evaluation time are negatively correlated the variance of outcomes for SWEET is notably high.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Investigation of dose reduction in cardiac perfusion SPECT via optimization and choice of the image reconstruction strategy

Background: We investigated the extent to which the administered dose (activity) level can be reduced without sacrificing diagnostic accuracy for three reconstruction strategies for SPECT-myocardial perfusion imaging (MPI). Methods: We optimized the parameters of the three reconstruction strategies for perfusion-defect detection over a range of simulated administered dose levels using a set of hybrid studies (derived from 190 subjects) consisting of clinical SPECT-MPI data modified to contain realistic simulated lesions. The optimized strategies we considered are filtered backprojection (FBP) with no correction for degradations, ordered-subsets expectation-maximization (OS-EM) with attenuation correction (AC), scatter correction (SC), and resolution correction (RC), and OS-EM with scatter and resolution correction only. Each study was evaluated using a total perfusion deficit (TPD) score computed by the Quantitative Perfusion SPECT (QPS) software package. We conducted a receiver operating characteristics (ROC) study based on the TPD scores for each dose level and reconstruction strategy. Results: For FBP, the achieved optimum values of the area under the ROC curve (AUC) at 100%, 50%, 25%, and 12.5% of standard dose were 0.75, 0.74, 0.72, and 0.70, respectively, compared to 0.81, 0.79, 0.76, and 0.74 for OS-EM with AC–SC–RC and 0.78, 0.77, 0.74, 0.72 for OS-EM with SC–RC. Conclusions: Our results suggest that studies reconstructed by OS-EM with AC–SC–RC could possibly be reduced, on average, to 25% of the originally administered dose without causing diagnostic accuracy (AUC) to decrease below that of FBP.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
NASA NTRS1984

Cooldown Strategy for Cryogenic Wind Tunnels

Criteria substantiated by experimental and real-time simulation data ensure optimal utlization of liquid nitrogen injected for cooling a 0.3-m transonic cryogenic tunnel (TCT). Research includes simulated cooldowns using procedures normally employed by each of several TCT operators, simulated cooldowns at constant mach number, simulated cooldowns at various constant fan speeds and cooldowns at constant metal-to-gas temperature differences.

Thibodeaux, J. J.↗