Search NASA⌕ Search

SEARCH · Search NASA

Results for “Single Event Effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Climate Change Potential Impacts on the Built Environment and Possible Adaptation Strategies

The built environment consists of components that exist at a range of scales from small (e.g., houses, shopping malls) to large (e.g., transportation networks) to highly modified landscapes such as cities. Thus, the impacts of climate change on the built environment may have a multitude of effects on humans and the land. The impact of climate change may be exacerbated by the interaction of different events that singly may be minor, but together may have a synergistic set of impacts that are significant. Also, mechanisms may exist wherein the built environment, particularly in the form of cities, may affect weather and the climate on local and regional scales. Hence, a city may be able to cope with prolonged heat waves, but if this is combined with severe drought, the overall result could be significant or even catastrophic, as accelerating demand for energy to cooling taxes water supplies needed both for energy supply and municipal water needs. This presentation surveys potential climate change impacts on the built environment from the perspective of the National Climate Assessment, and explores adaptation measures that can be employed to mitigate these impacts.

Quattrochi, Dale A.↗

Charge Trap Layer Supercharging for Improved Bit Reliability in 3-D NAND Flash Under Proton Irradiation

Single-event upset (SEU) cross sections are reduced in 176-layer charge trap (CT) 3-D nand devices under proton irradiation when multiple write operations are applied sequentially without the typical erase-before-write. Here, this effect is observed for multiple data patterns and in both single-level cell (SLC) and triple-level cell (TLC) operating modes. SEU cross section calculation methodologies are discussed for highly scaled 3-D devices both with and without the application of rewrites, and potential implications for long-term endurance effects are proposed.

Breeding, Matthew Luel [Sandia National Laboratori↗

An Artificial Neural Network System for Photon-Based Active Interrogation Applications

Active interrogation (AI) is a promising technique to detect shielded special nuclear materials (SNMs). At the University of Michigan, we are developing a photon-based AI system that uses bremsstrahlung radiation from an electron linear accelerator (linac) as an ionizing source and stilbene organic scintillating detectors for neutron detection. Stilbene scintillators are sensitive to fast neutrons and photons and have excellent pulse shape discrimination (PSD) capabilities. The traditional charge integration (CI) method commonly used for PSD analysis eliminates piled-up pulses and relies on a particle discrimination line to separate neutrons and photons. The presence of the intense photon flux during AI creates a significant number of piled-up events in the stilbene scintillator, thereby posing a great challenge to the traditional CI method. Identifying true single neutron pulses becomes challenging due to the presence of a pile-up cloud and overlapping neutron, photon and pile-up clouds in the PSD analysis. To mitigate the effect of pulse pile up and identify true single neutron pulses from stilbene scintillators, an artificial neural network (ANN) system is developed. The developed ANN system identifies single neutron pulses and neutron-photon combinations from piled-up events. The results obtained from a 252Cf measurement in the presence of the intense photon flux show that the developed ANN system outperforms the traditional CI method. Since many piled-up events lie above the particle discrimination line, they get misclassified as neutrons by the traditional CI method resulting in 25% overestimation of the net neutron count rate during the linac pulse. The overall net neutron count rate (single and restored neutrons) during the linac pulse, estimated by the ANN system is 60% of the ground truth. Energy spectroscopy of the ANN attributed single neutron pulses further provides evidence on the detection of prompt fission neutrons from the 252Cf fission source.

42 ENGINEERING↗

Double parton interactions in {gamma}+3 jet events in pp collisions at {radical}(s)=1.96 TeV

We have used a sample of {gamma}+3 jets events collected by the D0 experiment with an integrated luminosity of about 1 fb{sup -1} to determine the fraction of events with double parton scattering (f{sub DP}) in a single pp collision at {radical}(s)=1.96 TeV. The DP fraction and effective cross section ({sigma}{sub eff}), a process-independent scale parameter related to the parton density inside the nucleon, are measured in three intervals of the second (ordered in p{sub T}) jet transverse momentum p{sub T}{sup jet2} within the range 15{<=}p{sub T}{sup jet2{<=}}30 GeV. In this range, f{sub DP} varies between 0.23{<=}f{sub DP{<=}}0.47, while {sigma}{sub eff} has the average value {sigma}{sub eff}{sup ave}=16.4{+-}0.3(stat){+-}2.3(syst) mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiation-Induced Transient Effects in Near Infrared Focal Plane Arrays

This viewgraph presentation describes a test simulate the transient effects of cosmic ray impacts on near infrared focal plane arrays. The objectives of the test are to: 1) Characterize proton single events as function of energy and angle of incidence; 2) Measure charge spread (crosstalk) to adjacent pixels; 3) Assess transient recovery time.

Reed, Robert A.↗

Double parton interactions in photon+3 jet events in ppbar collisions sqrt{s}=1.96 TeV

We have used a sample of photon+3 jets events collected by the D0 experiment with an integrated luminosity of about 1 fb{sup -1} to determine the fraction of events with double parton scattering (f{sub DP}) in a single ppbar collision at {radical}s = 1.96 TeV. The DP fraction and effective cross section (sigma{sub eff}), a process-independent scale parameter related to the parton density inside the nucleon, are measured in three intervals of the second (ordered in p{sub T}) jet transverse momentum pT{sub jet2} within the range 15 < pT{sub jet2} < 30 GeV. In this range, f{sub DP} varies between 0.23 < f{sub DP} < 0.47, while sigma{sub eff} has the average value sigma{sub effave} = 16.4 {+-} 0.3(stat) {+-} 2.3(syst) mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DFF Layout Variations in CMOS SOI—Analysis of Hardening by Design Options

Four D flip-flop (DFF) layouts were created from the same schematic in Sandia National Laboratories’ CMOS7 silicon-on-insulator (SOI) process. Single-event upset (SEU) modeling and testing showed an improved response with the use of shallow (not fully bottomed) N-type metal-oxide-semiconductor field-effect transistors (NMOSFETs), extending the size of the drain implant and increasing the critical charge of the transmission gates in the circuit design and layout. This research also shows the importance of correctly modeling nodal capacitance, which is a major factor determining SEU critical charge. Accurate SEU models enable the understanding of the SEU vulnerabilities and how to make the design more robust.

42 ENGINEERING↗

Large-Scale Test of Dynamic Correlation Processors: Implications for Correlation-Based Seismic Pipelines

Correlation detectors are of considerable interest to the seismic monitoring communities because they offer reduced detection thresholds and combine detection, location and identification functions into a single operation. They appear to be ideal for applications requiring screening of frequent repeating events. However, questions remain about how broadly empirical correlation methods are applicable. We describe the effectiveness of banks of correlation detectors in a system that combines traditional power detectors with correlation detectors in terms of efficiency, which we define to be the fraction of events detected by the correlators. This paper elaborates and extends the concept of a dynamic correlation detection framework – a system which autonomously creates correlation detectors from event waveforms detected by power detectors; and reports observed performance on a network of arrays in terms of efficiency. We performed a large scale test of dynamic correlation processors on an 11 terabyte global dataset using 25 arrays in the single frequency band 1-3 Hz. The system found over 3.2 million unique signals and produced 459,747 screened detections. A very satisfying result is that, on average, efficiency grows with time and, after nearly 16 years of operation, exceeds 47% for events observed over all distance ranges and approaches 70% for near regional and 90% for local events. This observation suggests that future pipeline architectures should make extensive use of correlation detectors, principally for decluttering observations of local and near-regional events. Our results also suggest that future operations based on correlation detection will require commodity large-scale computing infrastructure, since the numbers of correlators in an autonomous system can grow into the hundreds of thousands.

47 OTHER INSTRUMENTATION↗

An islanding detection methodology combining decision trees and Sandia frequency shift for inverter-based distributed generations

Distributed generations (DGs) for grid-connected applications require an accurate and reliable islanding detection methodology (IDM) for secure system operation. This paper presents an IDM for grid-connected inverter-based DGs. The proposed method is a combination of passive and active islanding detection techniques for aggregation of their advantages and elimination/minimisation of the drawbacks. In the proposed IDM, the passive method utilises critical system attributes extracted from local voltage measurements at target DG locations as well as employs decision tree-based classifiers for characterisation and detection of islanding events. The active method is based on Sandia frequency shift technique and is initiated only when the passive method is unable to differentiate islanding events from other system events. Thus, the power quality degradation introduced into the system by active islanding detection techniques can be minimised. Furthermore, a combination of active and passive techniques allows detection of islanding events under low power mismatch scenarios eliminating the disadvantage associated with the use of passive techniques alone. Finally, detailed case study results demonstrate the effectiveness of the proposed method in detection of islanding events under various power mismatch scenarios, load quality factors and in the presence of single or multiple grid-connected inverter-based DG units.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Simulation of Binary-single Interactions in AGN Disk. I. Gas-enhanced Binary Orbital Hardening

Stellar-mass binary black hole (BBH) mergers within the accretion disks of active galactic nuclei may contribute to gravitational wave (GW) events detected by ground-based GW detectors. In particular, the interaction between a BBH and a single stellar-mass black hole (sBH), known as the binary-single interaction (BSI) process, can potentially lead to GW events with detectable nonzero eccentricity. Previous studies of the BSI process, which neglected the effects of gas, showed that BSIs contribute non-negligibly to GW events in a coplanar disk environment. In this work, we conduct a series of two-dimensional hydrodynamical and N-body simulations to explore the BSI in a gas environment by coupling REBOUND with Athena++. We perform 360 simulation runs, spanning parameters in disk surface density Σ 0 and impact parameter b. We find that the gas-induced energy dissipation within the three-body system becomes significant if the encounter velocity between the sBHs is sufficiently large (≫c s ). Our simulation results indicate that approximately half of the end states of the BSI are changed by gas. Furthermore, at higher gas density, the number of close encounters during the BSI process will increase, and the end-state BBHs tend to be more compact. Consequently, the presence of gas may shorten the GW merger timescale for end-state BBHs and increase the three-body merger rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Using FLUKA to Calculate Spacecraft: Single Event Environments: A Practical Approach

The FLUKA nuclear transport and reaction code can be developed into a practical tool for calculation of spacecraft and planetary surface asset SEE and TID environments. Nuclear reactions and secondary particle shower effects can be estimated with acceptable accuracy both in-flight and in test. More detailed electronic device and/or spacecraft geometries than are reported here are possible using standard FLUKA geometry utilities. Spacecraft structure and shielding mass. Effects of high Z elements in microelectronic structure as reported previously. Median shielding mass in a generic slab or concentric sphere target geometry are at least approximately applicable to more complex spacecraft shapes. Need the spacecraft shielding mass distribution function applicable to the microelectronic system of interest. SEE environment effects can be calculated for a wide range of spacecraft and microelectronic materials with complete nuclear physics. Evaluate benefits of low Z shielding mass can be evaluated relative to aluminum. Evaluate effects of high Z elements as constituents of microelectronic devices. The principal limitation on the accuracy of the FLUKA based method reported here are found in the limited accuracy and incomplete character of affordable heavy ion test data. To support accurate rate estimates with any calculation method, the aspect ratio of the sensitive volume(s) and the dependence must be better characterized.

Koontz, Steve↗

Impact of Space Radiation with Other Combined Space Environmental Factors on Plant Seeds and Plant Development: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. To evaluate the effects of space radiation on plant seeds and development, we explored several platforms, including ground-based radiation facilities, the MISSE platform outside the ISS, and other Low Earth Obit (LEO) opportunities. Radiation particle types ranged from neutrons, single charged particles, simulated galactic cosmic rays, simulated solar particle events, the radiation field outside the ISS (total 10 months on the ISS), and the field inside a LEO vehicle (over 3 years). Radiation doses ranged from around 10 cGy to 80 cGy with acute or chronic exposures. In these studies up to 15 types of model plant and crop seeds were evaluated. In addition, tests were conducted to determine whether the combination of radiation exposure and simulated microgravity could have synergetic effects. Exposure to space radiation at the levels tested had no significant impact on the germination rate in Arabidopsis and the seeds from multiple crop plants; however, radiation exposure alone or with other combined factors reduced the viability of some seed types. Overall, the changes within plants grown from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Radiation exposure also significantly altered transcriptomic profiles in seedlings grown from irradiated seeds. The impact of space radiation on seeds and plants potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated.

Y Zhang↗

Comparison of New Methods for Assessing Community Response to High Energy Impulsive Sounds

The latest CHABA Working Group to have reviewed published information about the effects of high energy impulsive sounds (such as sonic booms) on communities has recommended abandonment of the dosage-response relationship identified by its predecessor in favor of two alternate prediction method. Both of the new assessment methods continue to rely on C-weighted measurements of impulsive sounds One of the two assessment methods retains the standard assumptions of the 'equal energy hypothesis' (the notion that annoyance is governed simply by the product of level, duration, and number noise events), and further assumes that the rate of growth of the prevalence of annoyance is proportional to the rate of growth of loudness with level. The other assessment method, however, assumes a level dependent (non-equal energy) summation of the C-weighted sound exposure levels of individual impulsive events. Since predictions of the second method are distribution-dependent, they are not readily represents graphically in the form of a single dosage-response function. The effects on annoyance predictions of variance in distributions of CSEL values of impulsive sounds are explored in this presentation.

Fidell, Sanford↗

Probing nuclear effects using single-transverse kinematic imbalance with MINERvA

Kinematic imbalance of the final-state particles in the plane transverse to the neutrino direction provides a sensitive probe of nuclear effects. In this contribution, we report the MINERvA measurement of the single-transverse kinematic imbalance in neutrino charged-current quasielastic-like events on CH targets. Furthermore, to improve the momentum measurements of the final-state particles, we develop a method to select elastically scattering contained (ESC) protons and a general procedure to correct the transverse momentum scales.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin-1 atoms in optical superlattices: Single-atom tunneling and entanglement

We examine spinor Bose-Einstein condensates in optical superlattices theoretically using a Bose-Hubbard Hamiltonian that takes spin effects into account. Assuming that a small number of spin-1 bosons is loaded in an optical potential, we study single-particle tunneling that occurs when one lattice site is ramped up relative to a neighboring site. Spin-dependent effects modify the tunneling events in a qualitative and quantitative way. Depending on the asymmetry of the double well, different types of magnetic order occur, making the system of spin-1 bosons in an optical superlattice a model for mesoscopic magnetism. We use a double-well potential as a unit cell for a one-dimensional superlattice. Homogeneous and inhomogeneous magnetic fields are applied, and the effects of the linear and the quadratic Zeeman shifts are examined. We also investigate the bipartite entanglement between the sites and construct states of maximal entanglement. The entanglement in our system is due to both orbital and spin degrees of freedom. We calculate the contribution of orbital and spin entanglements and show that the sum of these two terms gives a lower bound for the total entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Analysis of an Improved Bus-Based Multiprocessor Architecture

This paper analyses the effectiveness of a hybrid multiprocessing/multicomputing architecture that is based upon a single-board-computer multiprocessor (SBCM) architecture. Based upon empirical analysis using discrete event simulations and Monte Carlo techniques, this hybrid architecture, called the enhanced single-board-computer multiprocessor (ESBCM), is shown to have improved performance and scalability characteristics over current SBCM designs.

Ricks, Kenneth G.↗

Measurement and Simulation of the Variation in Proton-Induced Energy Deposition in Large Silicon Diode Arrays

The proton induced charge deposition in a well characterized silicon P-i-N focal plane array is analyzed with Monte Carlo based simulations. These simulations include all physical processes, together with pile up, to accurately describe the experimental data. Simulation results reveal important high energy events not easily detected through experiment due to low statistics. The effects of each physical mechanism on the device response is shown for a single proton energy as well as a full proton space flux.

Howe, Christina L.↗

Short Course on Lithium-Ion Batteries: Fundamental Concepts, Battery Safety, and Modeling Techniques

When developing this course several years back I asked myself, "What do I think the TFAWS community needs to know about lithium-ion batteries and why should they care?" I think the answers to these questions can be boiled down to the following statements: 1. Lithium-ion (Li-ion) battery electrical performance and efficiency are heavily driven by thermal conditions. 2. Li-ion battery assemblies can experience single cell thermal runaway events which can lead to cell-to-cell propagation; these are thermally driven failure events that can be controlled with effective thermal management systems. 3. Knowledge of BOTH Li-ion battery fundamentals AND traditional thermal design principles are required to develop safe battery assemblies that are both gravimetrically and volumetrically optimized.This year the Short Course on Lithium-ion Batteries will be presented in a 2-part series. The first portion, "Fundamentals, Battery Safety, and Thermal Runaway," will focus on educating participants on the fundamental aspects of Li-ion batteries and on battery safety related topics (i.e. thermal runaway, cell-to-cell propagation, safe handling practices, et...). The second portion, "Practical Thermal Simulation Techniques," will provide participants with a real time demonstration of how to use Thermal Desktop to model of Li-ion battery assemblies. This part of the lesson will cover geometry simplification, mesh development, boundary conditions, and heat loads for both nominal operations (charge and discharge) and for thermal runaway events.

Walker, William↗