Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Shape-controlled synthesis of gold icosahedra and nanoplates using Pluronic P123 block copolymer and sodium chloride

Gold icosahedra with an average diameter of about 600 nm were easily prepared by heating an aqueous solution of the amphiphilic block copolymer, poly(ethylene oxide){sub 20}-poly(propylene oxide){sub 70}-poly(ethylene oxide){sub 20} (Pluronic P123), and hydrogen tetrachloroaurate(III) trihydrate (HAuCl{sub 4}.3H{sub 2}O) at 60 deg. C for 25 min. When sodium chloride (NaCl:HAuCl{sub 4} molar ratio=10:1) was added to this aqueous solution, gold nanoplates were produced. The chloride ion was found to be a key component in the formation of the gold nanoplates by facilitating the growth of {l_brace}111{r_brace} oriented hexagonal/triangular gold nanoplates, because similar gold nanoplates were produced when LiCl or KCl was added to the aqueous solution instead of NaCl, while gold nanocrystals having irregular shapes were produced when NaBr or NaI was added. - Graphical abstract: Gold icosahedra were prepared by heating an aqueous solution of Pluronic P123 and HAuCl{sub 4}. When NaCl was added to this solution, gold nanoplates were produced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Composition and freezing of aqueous H2SO4/HNO3 solutions under polar stratospheric conditions

The results of laboratory investigations of the freezing behavior of aqueous acid solutions indicate that in the stratosphere H2SO/H2O aerosol droplets would not freeze at temperatures above the ice frost point in the absence of HNO3; however, in the presence of typical levels of HNO3 liquid sulfuric acid aerosols take up significant amounts of HNO3 and H2O vapors and freeze much more readily. This is a consequence of the very rapid change in composition of the liquid droplets as the temperature drops to within two to three degrees of the equilibrium temperature at which HNO3 and H2O vapors would co-condense to form a liquid solution. In the high latitude stratosphere this HNO3/H2O 'dew point' is typically around 192-194 K at 100 mbar.

Beyer, K. D.↗

Metal-Anion Pairing at Oxide/Water Interfaces: Theoretical and Experimental Investigations from the Nanoscale to the Macroscale

We combine the use of several techniques including bulk adsorption experiments, X-ray absorption, infrared, total internal reflection Raman, and vibrational sum frequencygeneration (XAS, IR, TIR-Raman, VSFG) spectroscopies, and molecular modeling to investigate ion adsorption at mineral surfaces. XAS and TIR-Raman provides data on how the metal binds to the surface (e.g., monodentate, bidentate), IR provides data on bulk anion adsorption at mineral surfaces from aqueous solutions, and VSFG provides surface specific data on anion adsorption at the mineral surface as well as impact of adsorbed metal-anion pairs on water structure at the mineral surface. Molecular modeling is used to guide spectroscopic data interpretation by providing information on water structure around ions in solution and the structure of metal-anion complexes in aqueous solutions. In addition, molecular modeling is used to provide insight into water structure at mineral surfaces, the surface sites involved in ion adsorption, and the distribution of ion pairs between aqueous solution and the mineral surface. Our studies have focused on systems involving alkaline earth metal (Mg2+, Ca2+, Sr2+, Ba2+) and heavy metal (Co2+, Cd2+) cations. The anions we have selected for studyinclude Cl-, NO3-, ClO4-, SO42-, SeO32-, and SeO42-. Ion adsorption and the potential formation ofternary complexes on silica (quartz, amorphous silica), alumina (corundum and gibbsite), and ferric iron oxides (goethite and hematite) are under investigation.

58 GEOSCIENCES↗

Aqueous phase deposition of dense tin oxide films with nano-structured surfaces

Dense tin oxide films were successfully fabricated in an aqueous solution. The pH of the solutions was controlled to pH 1.3 by addition of HCl. Precise control of solution condition and crystal growth allowed us to obtain dense tin oxide films. Concave–convex surface of fluorine-doped tin oxide (FTO) substrates was entirely-covered with the continuous films. The films were about 65 nm in thickness and had nano-structured surfaces. Morphology of the films was strikingly different from our previous reported nano-sheet assembled structures. The films were not removed from the substrates by strong water flow or air blow to show strong adhesion strength. The aqueous solution process can be applied to surface coating of various materials such as nano/micro-structured surfaces, particles, fibers, polymers, metals or biomaterials. - Graphical abstract: Dense tin oxide films of 65 nm were successfully fabricated in an aqueous solution. They had nano-structured surfaces. Concave-convex substrates were entirely-covered with the continuous films. - Highlights: • Dense tin oxide films of 65 nm were successfully fabricated in an aqueous solution. • They had nano-structured surfaces. • Concave–convex substrates were entirely-covered with the continuous films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Conductivity of Semiconducting Polymer Hydrogels

Poly(fluorene-alt-thiophene) (PFT) is a conjugated polyelectrolyte that self-assembles into rod-like micelles in water, with the conjugated polymer backbone running along the length of the micelle. At modest concentrations (-10 mg/mL in aqueous solutions), PFT forms hydrogels, and this work focuses on understanding the structure and intermolecular interactions in those gel networks. The network structure can be directly visualized using cryo electron microscopy. Oscillatory rheology studies further tell us about connectivity within the gel network, and the data are consistent with a picture where polymer chains bridge between micelles to hold the network together. Addition of tetrahydrofuran (THF) to the gels breaks those connections, but once the THF is removed, the gel becomes stronger than it was before, presumably due to the creation of a more interconnected nanoscale architecture. Small polymer oligomers can also passivate the bridging polymer chains, breaking connections between micelles and dramatically weakening the hydrogel network. Fits to solution-phase small-angle X-ray scattering data using a Dammin bead model support the hypothesis of a bridging connection between PFT micelles, even in dilute aqueous solutions. Finally, time-resolved microwave conductivity measurements on dried samples show an increase in carrier mobility after THF annealing of the PFT gel, likely due to increased connectivity within the polymer network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scale-Up Testing-Foam as a Remedial Amendment Carrier

This paper describes results from intermediate-scale, two-dimensional testing of foam injection into sedimentary materials collected from the U.S. Department of Energy (DOE) Hanford Site. The testing was performed to evaluate the effects of delivery pressure, injection rate, foam stability, foam quality, and formation heterogeneities on the migration of foam, water, remediation amendment, and contaminants within a sedimentary volume. Testing was accomplished in a test bed that is configured in the form of two thin rectangular boxes. Each of the boxes holds approximately 135 liters (255 kilograms) of sediment. Foam was injected into each box through a segment of polyvinyl chloride slotted well casing, and air was extracted from the boxes through a similar system. Four sets of tests were conducted. During Test 1, both of the boxes were loaded in a homogeneous manner, while in Tests 2, 3, and 4, both of the boxes were loaded so as to contain two rectangular zones of heterogeneity. In addition, a zone of the sediment contained in the test bed used for Test 4 was augmented with uranium-rich calcite to produce a known concentration of uranium. The injection rate varied between the boxes during the Test 1 but was the same for each box during the final three tests. The foam generation formula for Tests 1 and 2 consisted of an aqueous solution of anionic surfactant. The foam generation formula used in Test 3 consisted of an aqueous solution of anionic surfactant and contained 25,000 milligrams per liter (mg/L) of phosphate in the form of a 9:1 mixture of sodium phosphate and sodium tripolyphosphate. The foam generating formula used in Test 4 consisted of an aqueous solution of an anionic surfactant and a nonionic surfactant and also contained 5,000 mg/L of phosphate as the aforementioned mixture. Subsequent to each of the four tests, the test beds were disassembled, and samples of the sediments were taken and analyzed for a number of parameters, depending on the specific test. This paper presents the results of the intermediate-scale testing.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Data for 3-Hydroxypropionic Acid Recovery from Fermentation Broth through Novel Downstream Processing: Technoeconomic Analysis

This study develops and validates a simplified, fully solvent-free downstream processing (DSP) strategy for high-purity recovery of 3-hydroxypropionic acid (3-HP) from real fermentation broth containing 62.3 g/L of 3-HP. Optimized activated carbon treatment achieved 98% color removal, while Amberlite IRA-67 was operated at pH 4.5 and 30 °C to minimize product loss. This is the first integrated demonstration of a fully solvent-free DSP enabling recovery of bio-based 3-HP as both a solid sodium salt and a concentrated aqueous solution, supported by techno-economic analysis. At lab scale, the process achieved 77.3% recovery of sodium 3-HP with 83.2% (w/w) purity and produced a 30% (w/v) aqueous solution. Techno-economic analysis yielded minimum selling prices of $0.551/kg for the solution and $0.892/kg for the salt, both below target thresholds for cost-competitive bio-acrylic acid production. Overall, these results demonstrate an efficient, scalable, and economically viable industrial pathway for 3-HP recovery.

Bioproducts↗

Statistical mechanics of sum frequency generation spectroscopy for the liquid-vapor interface of dilute aqueous salt solutions

We demonstrate a theoretical description of vibrational sum frequency generation (SFG) at the boundary of aqueous electrolyte solutions. This approach identifies and exploits a simple relationship between SFG lineshapes and the statistics of molecular orientation and electric field. Our computer simulations indicate that orientational averages governing SFG susceptibility do not manifest ion-specific shifts in local electric field, but instead, ion-induced polarization of subsurface layers. Counterbalancing effects are obtained for monovalent anions and cations at the same depth. Ions held at different depths induce an imbalanced polarization, suggesting that ion-specific effects can arise from weak, long ranged influence on solvent organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalistic Self-Assembled Phase Behavior of Block Copolymer Blended with Organic Derivative Depending on Temperature

Amphiphilic Pluronic block copolymers have attracted great attention in a broad spectrum of potential applications due to the excellent phase behaviors in an aqueous solution, and many efforts have been made to investigate their phase behaviors under various external conditions. With a variety of external conditions, however, the closed looplike phase behaviors of a Pluronic block copolymer in an aqueous solution have not been reported yet. Herein, we report the closed looplike (CLL) phase behavior of a Pluronic P65 triblock copolymer blended with an organic derivative, 5-methylsalicylic acid (5mS), in aqueous solution, which is very unique for block copolymers. As the 5mS concentration increases, the isotropic to ordered phase or back to isotropic phase transition temperature is decreased while the number of closed loops is increased to two. To the best of our knowledge, this is the first demonstration of a CLL phase transition of a Pluronic block copolymer in an aqueous solution, which is readily applicable to optical devices such as optical sensors or optoelectronics, and nanotemplates for a highly ordered superlattice. Additionally, this provides new insight into the understanding on the phase behavior of a Pluronic block copolymer blended with additives.

59 BASIC BIOLOGICAL SCIENCES↗

Insights into Supramolecular Sites Responsible for Complete Separation of Biomass-Derived Phenolics and Glucose in Metal–Organic Framework NU-1000

The molecular origins of adsorption of lignin-derived phenolics to metal–organic framework NU-1000 are investigated from aqueous solution as well as in competitive mode with glucose present in the same aqueous mixture. A comparison of adsorption equilibrium constants ($K_{ads}$) for phenolics functionalized with either carboxylic acid or aldehyde substituents demonstrated only a slight increase (less than a factor of 6) for the former according to both experiments and calculations. This small difference in $K_{ads}$ between aldehyde and carboxylic-acid substituted adsorbates is consistent with the pyrene unit of NU-1000 as the adsorption site, rather than the zirconia nodes, while at saturation coverage, the adsorption capacity suggests multiple guests per pyrene. Experimental standard free energies of adsorption directly correlated with the molecular size and electronic structure calculations confirmed this direct relationship, with the pyrene units as adsorption site. The underlying origins of this relationship are grounded in noncovalent $π–π$ interactions as being responsible for adsorption, the same interactions present in the condensed phase of the phenolics, which to a large extent govern their heat of vaporization. Thus, NU-1000 acts as a preformed aromatic cavity for driving aromatic guest adsorption from aqueous solution and does so specifically without causing detectable glucose adsorption from aqueous solution, thereby achieving complete glucose–phenolics separations. The reusability of NU-1000 during an adsorption/desorption cycle was good, even with some of the phenolic compounds with greatest affinity not easiliy removed with water and ethanol washes at room temperature. A competitive adsorption experiment gave an upper bound for $K_{ads}$ for glucose of at most 0.18 M –1 , which can be compared with $K_{ads}$ for the phenolics investigated here, which fell in the range of 443–42 639 M –1 . The actual value of $K_{ads}$ for glucose may be much closer to zero given the lack of observed glucose uptake with NU-1000 as adsorbent.

09 BIOMASS FUELS↗

Effect of laser radiation on the gamma activity of aqueous salt solutions containing {sup 152}Eu

We report an experimental study of the effect of laser irradiation of aqueous salt solutions containing the {sup 152}Eu isotope in the presence of nickel nanoparticles on the gamma activity of the isotope. Nickel nanoparticles are generated using laser ablation of the target in water and added to the radionuclide solution before irradiation. Two types of Nd : YAG lasers with a pulse duration of 10 ns and different repetition rates are used to irradiate the solutions. It is found that the {sup 152}Eu activity as a result of repeated irradiation of solutions by a series of pulses decreases with each irradiation cycle. The obtained results are compared with data on the effect of maser radiation with a wavelength of 8 mm on the activity of the same isotope. Possible mechanisms of the effect of electromagnetic radiation on the {sup 152}Eu gamma activity are discussed. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface-Enhanced Raman Scattering Study of the Kinetics of Self-Assembly of Carboxylate-Terminated n -Alkanethiols on Silver

Adsorption of 11-mercaptoundecanoic acid (MUA) on silver from methanol and aqueous solutions was monitored in situ by surface-enhanced Raman scattering (SRES) spectroscopy. While adsorption of MUA from methanol is a one-step formation of a thiol-bound monolayer, SERS spectra reveal that monolayer formation from aqueous solution involves interactions of both carboxylate and thiol groups of MUA with the silver surface. Several Raman scattering bands, including the ν(C–S), ν s (COO – ), and ν(C–C), were used to investigate the evolution of the structure of adsorbed MUA on silver surfaces. The time-dependent profiles of these bands for assembly from aqueous solution indicate a multistep process, which is initiated by the binding of both carboxylate and thiol groups to silver, producing a mixture of gauche and trans conformations. In a subsequent step, the COO–Ag interactions are displaced by stronger S–Ag bonds, leading to ordering of the resulting monolayer with formation of a complete SAM with all-trans conformations. The results also showed that the adsorption process depended strongly on the solution pH and surface potential of the metal. Furthermore, these factors can significantly affect the participation and displacement of –COO – during self-assembly of MUA from aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coordination Chemistry of Mercury(II) in Liquid And Aqueous Ammonia Solution And the Crystal Structure of Tetraamminemercury(II) Perchlorate

The ammonia solvated mercury(II) ion has been structurally characterized in solution by means of EXAFS, {sup 199}Hg NMR, and Raman spectroscopy and in solid solvates by combining results from X-ray single crystal and powder diffraction, thermogravimetry, differential scanning calorimetry, EXAFS, and Raman spectroscopy. Crystalline tetraamminemercury(II) perchlorate, [Hg(NH{sub 3}){sub 4}](ClO{sub 4}){sub 2}, precipitates from both liquid ammonia and aqueous ammonia solution, containing tetraamminemercury(II) complexes. The orthorhombic space group (Pnma) imposes C{sub s} symmetry on the tetraamminemercury(II) complexes, which is lost at a phase transition at about 220 K. The Hg-N bond distances are 2.175(14), 2.255(16), and 2 x 2.277(9) {angstrom}, with a wide N-Hg-N angle between the two shortest Hg-N bonds, 122.1(7){sup o}, at ambient temperature. A similar distorted tetrahedral coordination geometry is maintained in liquid ammonia and aqueous ammonia solutions with the mean Hg-N bond distances 2.225(12) and 2.226(6) {angstrom}, respectively. When heated to 400 K the solid tetraamminemercury(II) perchlorate decomposes to diamminemercury(II) perchlorate, [Hg(NH{sub 3}){sub 2}](ClO{sub 4}){sub 2}, with the mean Hg-N bond distance 2.055(6) {angstrom} in a linear N-Hg-N unit. The mercury atoms in the latter compound form a tetrahedral network, connected by perchlorate oxygen atoms, with the closest Hg {hor_ellipsis} Hg distance being 3.420(3) {angstrom}. The preferential solvation and coordination changes of the mercury(II) ion in aqueous ammonia, by varying the total NH{sub 3}:Hg(II) mole ratio from 0 to 130, were followed by {sup 199}Hg NMR. Solid [Hg(NH{sub 3}){sub 4}](ClO{sub 4}){sub 2} precipitates while [Hg(H{sub 2}O){sub 6}]{sup 2+} ions remain in solution at mole ratios below 3-4, while at high mole ratios, [Hg(NH{sub 3}){sub 4}]{sup 2+} complexes dominate in solution. The principal bands in the vibrational spectrum of the [Hg(NH{sub 3}){sub 4}]{sup 2+} complex have been assigned.

36 MATERIALS SCIENCE↗

Simplified Production of Organic Compounds Containing High Enantiomer Excesses

The present invention is directed to a method for making an enantiomeric organic compound having a high amount of enantiomer excesses including the steps of a) providing an aqueous solution including an initial reactant and a catalyst; and b) subjecting said aqueous solution simultaneously to a magnetic field and photolysis radiation such that said photolysis radiation produces light rays that run substantially parallel or anti-parallel to the magnetic field passing through said aqueous solution, wherein said catalyst reacts with said initial reactant to form the enantiomeric organic compound having a high amount of enantiomer excesses.

Cooper, George W.↗

Stabilizing Aqueous Three-Dimensional Printed Constructs Using Chitosan-Cellulose Nanocrystal Assemblies

The assembly and binding of nanoparticles at the interfaces of aqueous two-phase systems enable the three-dimensional (3D) printing of all-aqueous naturally occurring materials. When a dispersion of cellulose nanocrystals (CNCs) in an aqueous solution of polyethylene glycol (PEG) is brought into contact with chitosan dissolved in an aqueous solution of dextran, the CNCs and chitosan diffuse to the interface between the two immiscible aqueous solutions, electrostatically interact, and form a solid, membranous layer sufficiently rapidly to 3D print tubules of one liquid in the other. Additionally, the diameter, length, spatial arrangement, and stability of the printed tubules can be broadly controlled. Adsorption and directional diffusion of ionic species across the membranous layer make heavy metal ion removal possible. The results present a platform for fabricating and developing all-aqueous compartmentalized systems where function can be independently coupled to the inherent functionality of the nanoparticles or ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical and structural properties of plasma-treated Cordyceps bassiana spores as studied by circular dichroism, absorption, and fluorescence spectroscopy

To understand the killing mechanism of fungal spores by plasma treatment, the optical, structural, and biological properties of the insect pathogenic fungus Cordyceps bassiana spores were studied. A nonthermal atmospheric-pressure plasma jet (APPJ) was used to treat the spores in aqueous solution. Optical emission spectra of the APPJ acquired in air indicated emission peaks corresponding to hydroxyl radicals and atomic oxygen. When the APPJ entered the aqueous solution, additional reactive species were derived from the interaction of plasma radicals with the aqueous solution. Fluorescence and absorption spectroscopy confirmed the generation of hydroxyl radicals and hydrogen peroxide in the plasma-activated water (PAW). Spore counting showed that plasma treatment significantly reduced spore viability. Absorption spectroscopy, circular dichroism (CD) spectroscopy, and agarose gel electrophoresis of the DNA extracted from plasma-treated spores showed a reduction in spore DNA content. The magnitude of the dip in the CD spectrum was lower in the plasma-treated spores than in the control, indicating that plasma treatment causes structural modifications and/or damage to cellular components. Tryptophan fluorescence intensity was lower in the plasma-treated spores than in the control, suggesting that plasma treatment modified cell wall proteins. Changes in spore viability and DNA content were attributed to structural modification of the cell wall by reactive species coming from the APPJ and the PAW. Our results provided evidence that the plasma radicals and the derived reactive species play critical roles in fungal spore inactivation.

60 APPLIED LIFE SCIENCES↗

Effective Storage of Electrons in Water by the Formation of Highly Reduced Polyoxometalate Clusters

Aqueous solutions of polyoxometalates (POMs) have been shown to have potential as high-capacity energy storage materials due to their potential for multi-electron redox processes, yet the mechanism of reduction and practical limits are currently unknown. Herein, we explore the mechanism of multi-electron redox processes that allow the highly reduced POM clusters of the form {MO 3 } y to absorb y electrons in aqueous solution, focusing mechanistically on the Wells-Dawson structure X 6 [P 2 W 18 O 62 ], which comprises 18 metal centers and can uptake up to 18 electrons reversibly (y = 18) per cluster in aqueous solution when the countercations are lithium. This unconventional redox activity is rationalized by density functional theory, molecular dynamics simulations, UV-vis, electron paramagnetic resonance spectroscopy, and small-angle X-ray scattering spectra. These data point to a new phenomenon showing that cluster protonation and aggregation allow the formation of highly electron-rich meta-stable systems in aqueous solution, which produce H 2 when the solution is diluted. Finally, we show that this understanding is transferrable to other salts of [P 5 W 30 O 110 ] 15- and [P 8 W 48 O 184 ] 40- anions, which can be charged to 23 and 27 electrons per cluster, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of shells on photoluminescence of aqueous CdTe quantum dots

Graphical abstract: Size-tunable CdTe coated with several shells using an aqueous solution synthesis. CdTe/CdS/ZnS quantum dots exhibited high PL efficiency up to 80% which implies the promising applications for biomedical labeling. - Highlights: • CdTe quantum dots were fabricated using an aqueous synthesis. • CdS, ZnS, and CdS/ZnS shells were subsequently deposited on CdTe cores. • Outer ZnS shells provide an efficient confinement of electron and hole inside the QDs. • Inside CdS shells can reduce the strain on the QDs. • Aqueous CdTe/CdS/ZnS QDs exhibited high stability and photoluminescence efficiency of 80%. - Abstract: CdTe cores with various sizes were fabricated in aqueous solutions. Inorganic shells including CdS, ZnS, and CdS/ZnS were subsequently deposited on the cores through a similar aqueous procedure to investigate the effect of shells on the photoluminescence properties of the cores. In the case of CdTe/CdS/ZnS quantum dots, the outer ZnS shell provides an efficient confinement of electron and hole wavefunctions inside the quantum dots, while the middle CdS shell sandwiched between the CdTe core and ZnS shell can be introduced to obviously reduce the strain on the quantum dots because the lattice parameters of CdS is situated at the intermediate-level between those of CdTe and ZnS. In comparison with CdTe/ZnS core–shell quantum dots, the as-prepared water-soluble CdTe/CdS/ZnS quantum dots in our case can exhibit high photochemical stability and photoluminescence efficiency up to 80% in an aqueous solution, which implies the promising applications in the field of biomedical labeling.

36 MATERIALS SCIENCE↗