Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Rapid solidification of highly undercooled alloy droplets

Experimental work is described on undercooling and structure of tin-lead droplets emulsified in oil. The droplets, predominantly in the size range of 10-20 microns, were cooled at rates ranging from about 0.04 K/sec to 1,000,000 K/sec. The higher cooling rates were obtained by a newly developed technique of quenching the emulsified droplets in a cold liquid. Measured undercoolings (at the lower cooling rates) ranged up to about 100 C. Structures obtained depended strongly on undercooling, cooling rate before nucleation, droplet size, alloy composition and the rate of heat extraction after nucleation.

Chu, M. G.↗
NASA NTRS1984

The solidification of monotectic alloys - Microstructures and phase spacings

The microstructures of directionally grown monotectic alloys in metallic and organic systems fall into two categories those which can form aligned fibrous composite structures with even phase spacings and fiber sections, and those in which the phase distribution is coarser and less regular. This division appears to relate to the form of the phase diagram and has been rationalized by Cahn (1977, 1979) in terms of the relative surface energies between solid and two liquids to give steady state or nonsteady state profiles. The transition in growth behavior occurs when the ratio of the monotectic temperature to that of the upper consolute temperature is approximately 0.9. Differences in phase spacings between a range of monotectic and eutectic systems are discussed in terms of the expected growth interface shapes and the factors which will influence them.

Grugel, R. N.↗
NASA NTRS1984

Solidification of highly undercooled Sn-Pb alloy droplets

Experimental work on undercooling and structure of tin-lead droplets emulsified in oil is described. The droplets, predominantly in the size range of 10 to 20 microns, were cooled at rates (just before nucleation) ranging from about 0.1 to 1 million K/s. The higher cooling rates were obtained by a newly developed technique of quenching the emulsified droplets in a cold liquid. Measured undercoolings (at the lower cooling rates) ranged up to about 100 K. Structures obtained depend strongly on undercooling, cooling rate before and after nucleation, and alloy composition. Droplets containing up to 5 wt pct Pb were apparently single phase when undercooled and rapidly quenched. Droplets in the composition range of about 25-90 wt pct Pb solidified dendritically, even at the most rapid quench rates employed, apparently because these alloys undercooled only slightly before nucleation of the primary phase.

Chu, M. G.↗
NASA NTRS1984

Impurity effects in dendritic solidification

A quantitative calculation of growth rates and tip radii is presented for dendrites growing in undercooled dilute solutions. Included in the calculations are the capillary corrections to the steady-state Ivantsov needle-crystal solutions. The results show good agreement with available experimental data and support the validity of the marginal-stability theory of dendritic growth.

Karma, A.↗
NASA NTRS1984

Effect of applied magnetic fields during directional solidification of eutectic Bi-Mn

Samples of rod eutectics Bi/MnBi were directionally solidified in a growth-up Bridgman-Stockbarger configuration in the presence of a transverse magnetic field up to 3 kg to determine whether gravity-driven convective effects could be reduced or eliminated. The experiments were carried out over a range of furnace velocities, V, of 0.2 to 50 cm per hour with a thermal gradient at the liquid-solid interface of 100 C/cm and 150 C/cm. Morphological, thermal and magnetic analyses were carried out on samples grown with and without an applied magnetic field. For samples grown at V greater than 3 cm per hour in a transverse magnetic field, reduced mean rod diameter and interrod spacing occurred as well as undercooling and increased coercive strength. The data agreed with that obtained for low-g growth at 50 cm per hour and 30 cm per hour.

Decarlo, J. L.↗
NASA NTRS1985

Chiral solidification of a phospholipid monolayer

The formation of chiral solidlike domains observed by Weiss and McConnell (1984) in monolayers of depalmitoylphosphatidylcholine (DPPC) floating on an air-water interface is investigated theoretically. It is proposed that the diffusion tensor for the two-dimensional fluidlike phase of the DPPC molecules has a chiral component acting perpendicular to the concentration gradient and coupled to the rotational motion of a pinwheellike molecule by the viscous forces. Diagrams are provided, and numerical estimates of the forces involved are shown to be in agreement with the observed behavior of the structures.

Langer, J. S.↗
NASA NTRS1984

Rapid solidification and dynamic compaction of Ni-base superalloy powders

A Ni-base superalloy containing 13Al-9Mo-2Ta (in at. percent) has been characterized in both the rapidly solidified condition and after dynamic compaction. Dynamically compacted specimens were examined in the as-compacted condition and observations related to current theories of interparticle bonding. In addition, the recrystallization behavior of the compacted material at relatively low temperature (about 0.5-0.75 Tm) was investigated.

Field, R. D.↗
NASA NTRS1985

Superalloy microstructural variations induced by gravity level during directional solidification

The Ni-base superalloy MAR-M246 (Hf) was directionally solidified during low gravity maneuvers aboard a NASA KC-135 aircraft. Gravity force variations during this process yielded a concomitant variation in microstructure and microsegregation. Secondary dendrite arm spacings are noted to be larger in the low-g portion; this, in turn, decreases the extent of interdendritic segregation. The amount of Hf in both the carbides and interdendritic eutectic increases as the gravity force diminishes. Fewer carbides are present in the low-g regions.

Johnston, M. H.↗
NASA NTRS1985

Heat Flow and Segregation in Directional Solidification

This research is composed of three major components: (1) development of interface morphology control for automated Bridgman growth of semiconductor systems; (2) comparative analysis of segregation during crystal growth in a reduced gravity environment and in the presence of magnetic fields; and (3) consequences of seeding by meltback in Bridgman growth under reduced gravity conditions. In attempts to optimize furnace design for crystal growth in a reduced gravity environment, an analytical approach to heat transfer was developed. It was thus found that charge confining crucibles diminish the ability to control the growth interface morphology through its position within the gradient zone. A heat pipe hot zone system for Bridgman growth, in reduced gravity environment, of crystal with diameters up to 16 mm was developed. For growth of Ga-doped germanium in the multipurpose (ASTP) furnace, it was found that the application of transverse magnetic fields (up to 36 kg) does not substantially increase the effective distribution coefficient; i.e., diffusion-controlled segregation observed in reduced gravity environment cannot be reached nor approached by magnetic field induced melt stabilization.

Witt, A. F.↗
NASA NTRS1985

Directional Solidification of Monotectic and Hypermonotectic Aluminum-indium Alloys Under Micron-g

The objective of this program is to analyze the mechanisms involved in the composite solid structure formation obtained from a miscibility gap alloy under microgravity. The metallic system aluminum-indium was chosen for its low critical temperature, broad miscibility gap, and rather well-known thermodynamic properties. The experiment was performed aboard the Salyut-7 spacecraft. The theories of capture of particulates by an advancing front were not able to explain the observations made on SPAR and Salyut-7 experiments. A new model was developed based on the filtration theory considering the globules population: the solid/liquid interface is like a filter of negligible thickness for the globules and its efficiency is limited by a pressure barrier measured for Al-In alloys by ground based experiments. The Materials Experiment Assembly (MEA)-3 experiment was consequently adjusted to take into account the new model. The behavior of the globules in an interacting population on the solid front is, of course, an essential factor in the theory. The theory is at present being completed by results obtained by the Laboratoire d'Aerothermique of Meudon. The hydrodynamic and thermal interactions between pairs of globules placed in a temperature gradient have been calculated showing a large reduction of the Marangoni effect compared to the isolated globule. Physico-chemical properties of metallic liquid interface are currently being investigated.

Potard, C.↗
NASA NTRS1984

Dendritic solidification in a binary alloy melt: Steady-state versus morphological stability theories

A model for dendritic growth in a binary alloy melt, in the presence of a positive temperature gradient in the liquid, is presented. The model describes satisfactorily the transition from a dendritic interface to a planar interface at very low and very large growth rates. A dendrite tip stability parameter is derived, strictly from steady state considerations, without resorting to a perturbation analysis. The estimates of the parameter agree with those obtained by models based on perturbation analyses.

Laymanan, V.↗
NASA NTRS1986

Solar silicon from directional solidification of MG silicon produced via the silicon carbide route

A process of metallurgical grade (MG) silicon production is presented which appears particularly suitable for photovoltaic (PV) applications. The MG silicon is prepared in a 240 KVA, three electrode submerged arc furnace, starting from high grade quartz and high purity silicon carbide. The silicon smelted from the arc furnace was shown to be sufficiently pure to be directionally solidified to 10 to 15 kg. After grinding and acid leaching, had a material yield larger than 90%. With a MG silicon feedstock containing 3 ppmw B, 290 ppmw Fe, 190 ppmw Ti, and 170 ppmw Al, blended with 50% of off grade electronic grade (EG) silicon to reconduct the boron content to a concentration acceptable for solar cell fabrication, the 99% of deep level impurities were concentrated in the last 5% of the ingot. Quite remarkably this material has OCV values higher tham 540 mV and no appreciable shorts due to SiC particles.

Rustioni, M.↗
NASA NTRS1987

Rapid-Solidification Processing Facility

Microstructural changes enhance properties of alloys. Major feature of process is rapid quenching of alloys or intermetallic compounds from liquid to solid state at cooling rates of 10 to the 6th power C/s.

Glasgow, Thomas K.↗
NASA NTRS1986

Cellular solidification of transparent monotectics

Understanding how liquid phase particles are engulfed or pushed during freezing of a monotectic is addressed. The additional complication is that the solid-liquid interface is nonplanar due to constitutional undercooling. Some evidence of particle pushing where the particles are the liquid phase of the montectic was already observed. Cellular freezing of the succinonitrile-glycerol system also occurred. Only a few compositions were tested at that time. The starting materials were not especially pure so that cellular interface observed was likely due to the presence of unkown impurities, the major portion of which was water. Topics addressed include: the effort of modeling the particle pushing process using the computer, establishing an apparatus for the determination of phase diagrams, and the measurement of the temperature gradients with a specimen which will solidify on the temperature gradient microscope stage.

Kaulker, W. F.↗
NASA NTRS1987

Modelling directional solidification

The influence of convection and freezing rate fluctuations on compositional homogeneity and crystalline perfection was studied.

Wilcox, William R.↗
NASA NTRS1987

Cellular monotectic model solidification

Succinonitrile (sn) was purified to a superior level using a fractional recrystallization method. The melting point of the best twice recrystallized sn was not raised by following with double distillation. This was tested using differential scanning calorimetry. The peak shape on melting also proved that double distillation after double recrystallization did not improve the quality. Stability and phase diagrams for succinonitrile and glycerol are presented.

Kaukler, William F.↗
NASA NTRS1986

Transition from a planar interface to cellular and dendritic structures during rapid solidification processing

The development of theoretical models which characterize the planar-cellular and cell-dendrite transitions is described. The transitions are analyzed in terms of the Chalmers number, the solute Peclet number, and the tip stability parameter, which correlate microstructural features and processing conditions. The planar-cellular transition is examined using the constitutional supercooling theory of Chalmers et al., (1953) and it is observed that the Chalmers number is between 0 and 1 during dendritic and cellular growth. Analysis of cell-dendrite transition data reveal that the transition occurs when the solute Peclet number goes through a minimum, the primary arm spacings go through a maximum, and the Chalmers number is equal to 1/2. The relation between the tip stability parameter and the solute Peclet number is investigated and it is noted that the tip stability parameter is useful for studying dendritic growth in alloys.

Laxmanan, V.↗
NASA NTRS1986

Solidification of Nb-Ge alloys in long drop tubes

The 30-m and 100 m-long drop tubes at the Marshall Space Flight Center have been used to obtain large undercooling in Nb-Ge alloys. Electron beam melting has been used to obtain drops approximately 2.5 mm in diam. In the 30-m tube, many specimens fell the length of the tube without solidifying, and were ultimately liquid-quenched in oil. The amount of undercooling prior to the quench was usually around 0.13 T(m). In the 100-m tube, freezing generally initiated during free fall, and the maximum undercooling was around 0.22 T(m). Microstructures were characterized by a combination of X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive analysis by X-rays. A variety of interesting microstructures was observed.

Bayuzick, R. J.↗