Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparative visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The V - /2.2 micron/ colors of elliptical galaxies

Infrared photometric measurements of 19 normal and giant elliptical galaxies are reported which were made with apertures having diameters 0.1 to 1.3 times the visual galactic diameters. The derived V (2.2 micron) colors, ranging from 3.15 to 3.60 magnitudes, are compared with the results of Grasdalen (1975) for 28 spiral and elliptical galaxies. All but one of the present magnitudes are found to be systematically brighter than Grasdalen's by 0.07 to 0.46 magnitude, and no significant radial color gradient is observed.

Frogel, J. A.↗

Schlieren with a laser diode source

The use of a laser diode as a light source for a schlieren system designed to study phase objects such as a wind-tunnel flow is explored. A laser diode schlieren photograph and a white light schlieren photograph (zirconium arc source) are presented for comparison. The laser diode has increased sensitivity, compared with light schlieren, without appreciable image degradiation, and is an acceptable source for schlieren flow visualization.

Burner, A. W.↗

Disturbance functions of the Goertler instability on an airfoil

Goertler vortices arise in boundary layers along concave surfaces due to centrifugal effects. This paper presents some results of an experiment conducted to study the development of these vortices on an airfoil with a pressure gradient in the concave region where an attached laminar boundary layer was insured with suction through a perforated panel. A sublimating chemical technique was used to visualize Goertler vortices and the velocity field was measured by laser velocimetry. Experimental disturbance functions are compared with those predicted by the linear stability theory. The trend of vortex amplification in the concave zone and damping in the following convex region is shown to essentially follow the theoretical predictions.

Dagenhart, J. R.↗

Investigation of spray dispersion and particulate formation in diesel fuel flames

An experimental study of electrostatical atomized and dispersed diesel fuel jets was conducted at various back pressures to 40 atm. A new electrostatic injection technique was utilized to generate continuous, stable fuel sprays at charge densities of 1.5 to 2.0 C/m3 of fluid at one atm, and about 1.0 C/m3 at 40 atm. Flowrates were varied from 0.5 to 2.5 ml/s and electric potentials to -18 kV. Visual observations showed that significant enhanced dispersion of charged fuel jets occurred at high back pressures compared to aerodynamic breakup and dispersion. The average drop size was about the same as the spray triode orifice diameter, and was between the Kelly theory and the Rayleigh limit. The ignition tests, done only at one atm, indicated stable combustion of the electrostatically dispersed fuel jets.

Back, L. H.↗

Supercomputer applications in gas turbine flowfield simulation

The numerical simulation of the unsteady three-dimensional viscous flow in a gas turbine stage is considered. Results from a three-dimensional time-accurate Navier-Stokes simulation of rotor-stator interaction in an axial turbine stage are presented. The present study uses a fine grid in the spanwise direction to better resolve the complex three-dimensional flowfield, and complements earlier reported coarse-grid calculations. Several different features of the flowfield are analyzed and compared to earlier calculations and to experimental data whenever possible. Computer animation techniques are used to visualize various unsteady three-dimensional features of the flow. The results demonstrate the capabilities of current computing hardware in obtaining accurate simulations of unsteady flows in turbomachines.

Madavan, Nateri K.↗

Free-to-roll tests of X-31 and F-18 subscale models with correlation to flight test results

This presentation will concentrate on a series of low-speed wind tunnel tests conducted on a 2.5% subscale F-18 model and a 2 percent subscale X-31 model. The model's control surfaces were unaugmented; and for the most part, were deflected at a constant angle throughout the tests. The tests consisted mostly of free-to-roll experiments conducted with the use of an air-bearing, surface pressure measurements, off-surface flow visualization, and force-balance tests. Where possible the results of the subscale tests have been compared to flight test data, or to other wind tunnel data taken at higher Reynolds numbers.

David L Williams, II↗

Interactive Terascale Particle Visualization

This paper describes the methods used to produce an interactive visualization of a 2 TB computational fluid dynamics (CFD) data set using particle tracing (streaklines). We use the method introduced by Bruckschen et al. [2001] that pre-computes a large number of particles, stores them on disk using a space-filling curve ordering that minimizes seeks, and then retrieves and displays the particles according to the user's command. We describe how the particle computation can be performed using a PC cluster, how the algorithm can be adapted to work with a multi-block curvilinear mesh, and how the out-of-core visualization can be scaled to 296 billion particles while still achieving interactive performance on PG hardware. Compared to the earlier work, our data set size and total number of particles are an order of magnitude larger. We also describe a new compression technique that allows the lossless compression of the particles by 41% and speeds the particle retrieval by about 30%.

Ellsworth, David↗

Discriminability measures for predicting readability of text on textured backgrounds

Several discriminability measures were examined for their ability to predict reading search times for three levels of text contrast and a range of backgrounds (plain, a periodic texture, and four spatial-frequency-filtered textures created from the periodic texture). Search times indicate that these background variations only affect readability when the text contrast is low, and that spatial frequency content of the background affects readability. These results were not well predicted by the single variables of text contrast (Spearman rank correlation = -0.64) and background RMS contrast (0.08), but a global masking index and a spatial-frequency-selective masking index led to better predictions (-0.84 and -0.81, respectively). c2000 Optical Society of America.

NASA Discipline Space Human Factors↗

Object detection in natural backgrounds predicted by discrimination performance and models

Many models of visual performance predict image discriminability, the visibility of the difference between a pair of images. We compared the ability of three image discrimination models to predict the detectability of objects embedded in natural backgrounds. The three models were: a multiple channel Cortex transform model with within-channel masking; a single channel contrast sensitivity filter model; and a digital image difference metric. Each model used a Minkowski distance metric (generalized vector magnitude) to summate absolute differences between the background and object plus background images. For each model, this summation was implemented with three different exponents: 2, 4 and infinity. In addition, each combination of model and summation exponent was implemented with and without a simple contrast gain factor. The model outputs were compared to measures of object detectability obtained from 19 observers. Among the models without the contrast gain factor, the multiple channel model with a summation exponent of 4 performed best, predicting the pattern of observer d's with an RMS error of 2.3 dB. The contrast gain factor improved the predictions of all three models for all three exponents. With the factor, the best exponent was 4 for all three models, and their prediction errors were near 1 dB. These results demonstrate that image discrimination models can predict the relative detectability of objects in natural scenes.

NASA Center ARC↗

Numerical Simulations of Buoyancy Effects in low Density Gas Jets

This paper deals with the computational analysis of buoyancy effects in the near field of an isothermal helium jet injected into quiescent ambient air environment. The transport equations of helium mass fraction coupled with the conservation equations of mixture mass and momentum were solved using a staggered grid finite volume method. Laminar, axisymmetric, unsteady flow conditions were considered for the analysis. An orthogonal system with non-uniform grids was used to capture the instability phenomena. Computations were performed for Earth gravity and during transition from Earth to different gravitational levels. The flow physics was described by simultaneous visualizations of velocity and concentration fields at Earth and microgravity conditions. Computed results were validated by comparing with experimental data substantiating that buoyancy induced global flow oscillations present in Earth gravity are absent in microgravity. The dependence of oscillation frequency and amplitude on gravitational forcing was presented to further quantify the buoyancy effects.

Satti, R. P.↗

The Cosmic-Ray and Gas Content of the Cygnus Region as Measured in Gamma Rays by the Fermi Large Area Telescope

Context. The Cygnus region hosts a giant molecular-cloud complex which actively forms massive stars. Interactions of cosmic rays with interstellar gas and radiation fields make it shine at y-ray energies. Several gamma-ray pulsars and other energetic sources are seen in this direction. Aims. In this paper we analyse the gamma-ray emission measured by the Fermi Large Area Telescope in the energy range from 100 Me V to 100 Ge V in order to probe the gas and cosmic-ray content over the scale of the whole Cygnus complex. The gamma-ray emission on the scale of the central massive stellar clusters and from individual sources is addressed elsewhere. Methods. The signal from bright pulsars is largely reduced by selecting photons in their off-pulse phase intervals. We compare the diffuse gamma-ray emission with interstellar gas maps derived from radio/mm-wave lines and visual extinction data. and a global model of the region, including other pulsars and gamma-ray sources, is sought. Results. The integral H I emissivity above 100 MeV averaged over the whole Cygnus complex amounts to 12.06 +/- 0.11 (stat.) (+0.15 -0.84) (syst.J] x 10(exp -26) photons /s / sr / H-atom, where the systematic error is dominated by the uncertainty on the H I opacity to calculate its column densities. The integral emissivity and its spectral energy distribution are both consistent within the systematics with LAT measurements in the interstellar space near the solar system. The average X(sub co) N(H2)/W(sub co) ratio is found to be [1.68 +/- 0.05 (stat.) (H I opacity)] x 1020 molecules cm-2 (K km/s /r, consistent with other LAT measurements in the Local Arm. We detect significant gamma-ray emission from dark neutral gas for a mass corresponding to approx 40% of that traced by CO. The total interstellar mass in the Cygnus complex inferred from its gamma-ray emission amounts to 8(+5 -1) x 10(exp 6) Solar M at a distance of 1.4 kpc. Conclusions. Despite the conspicuous star formation activity and large masses of the interstellar clouds, the cosmic-ray population in the Cygnus complex averaged over a few hundred parsecs is similar to that of the local interstellar space.

Ackermann, M.↗

Characterizing the 2016 Perseid Meteor Shower Outburst

The Perseid meteor shower has been observed for millennia and is known for its visually spectacular meteors and occasional outbursts. Normal activity displays Zenithal Hourly Rates (ZHRs) of approximately100. The Perseids were expected to outburst in 2016, primarily due to particles released during the 1862 and 1479 revolutions of parent Comet Swift-Tuttle. NASA's Meteoroid Environment Office predicted the timing, strength and duration of the outburst for spacecraft risk using the MSFC Meteoroid Stream Model [1]. A double peak was predicted, with an outburst displaying a ZHR of 210 +/- 50 at 00:30 UTC Aug 12 (139.5deg Solar Longitude), and a traditional peak ~12 hours later with rates still heightened from the outburst [2]. Video, visual, and radar observations taken worldwide by various entities were used to characterize the shower and compare to predictions.

Blaauw, R. C.↗

Characterizing the 2016 Perseid Meteor Shower Outburst

The Perseid meteor shower has been observed for millennia and known for its visually spectacular meteors and occasional outbursts. The Perseids were expected to outburst in 2016, primarily due to particles released during the 1862 and 1479 revolutions of Comet Swift-Tuttle. NASA's Meteoroid Environment Office predicted the timing, strength and duration of the outburst for spacecraft risk using the MSFC Meteoroid Stream Model. A double peak was predicted, with an outburst displaying a ZHR of 210 +/- 50 at 00:30 UTC Aug 12, and a traditional peak approximately 12 hours later with rates still heightened from the outburst. Video, visual, and radar observations taken worldwide by various entities were used to characterize the shower and compare to predictions.

Blaauw, R. C.↗

The Salinity Pilot-Mission Exploitation Platform (Pi-MEP): A Hub for Validation and Exploitation of Satellite Sea Surface Salinity Data

The Pilot-Mission Exploitation Platform (Pi-MEP) for salinity is an ESA initiative originally meant to support and widen the uptake of Soil Moisture and Ocean Salinity (SMOS) mission data over the ocean. Starting in 2017, the project aims at setting up a computational web-based platform focusing on satellite sea surface salinity data, supporting studies on enhanced validation and scientific process over the ocean. It has been designed in close collaboration with a dedicated science advisory group in order to achieve three main objectives: gathering all the data required to exploit satellite sea surface salinity data, systematically producing a wide range of metrics for comparing and monitoring sea surface salinity products’ quality, and providing user-friendly tools to explore, visualize and exploit both the collected products and the results of the automated analyses. The Salinity Pi-MEP is becoming a reference hub for the validation of satellite sea surface salinity missions by providing valuable information on satellite products (SMOS, Aquarius, SMAP), an extensive in situ database (e.g., Argo, thermosalinographs, moorings, drifters) and additional thematic datasets (precipitation, evaporation, currents, sea level anomalies, sea surface temperature, etc.). Co-localized databases between satellite products and in situ datasets are systematically generated together with validation analysis reports for 30 predefined regions. The data and reports are made fully accessible through the web interface of the platform. The datasets, validation metrics and tools (automatic, user-driven) of the platform are described in detail in this paper. Several dedicated scientific case studies involving satellite SSS data are also systematically monitored by the platform, including major river plumes, mesoscale signatures in boundary currents, high latitudes, semi-enclosed seas, and the high-precipitation region of the eastern tropical Pacific. Since 2019, a partnership in the Salinity Pi-MEP project has been agreed between ESA and NASA to enlarge focus to encompass the entire set of satellite salinity sensors. The two agencies are now working together to widen the platform features on several technical aspects, such as triple-collocation software implementation, additional match-up collocation criteria and sustained exploitation of data from the SPURS campaigns

ocean↗

Comparing Human Input in RViz and Virtual Reality Interfaces for 3D Object Manipulation Tasks

Effective human-in-the-loop robot control requires intuitive and easy to use interfaces. We present a within-subjects user study design to compare the ease of use of interfaces for human-robot teleoperation, specifically the ROS 3D visualization tool RViz and a virtual reality interface. Our proposed study will determine which interface is easiest to use and minimizes operator cognitive load in shared autonomy tasks.

Emily Sheetz↗

Heat Transfer Efficiency in Various Prandtl Number Turbulent Flows using DNS approach

Convective heat transfer in turbulent flows utilized in many nuclear reactor designs with various coolants. While the traditional light water reactors (LWR) rely on water coolant, some advanced next-generation designs propose to use gas, molten salt, liquid metal coolants. Due to large presence of LWRs, most of the convective heat transfer correlations are focused on fluids with properties similar to water. However, some of the next-generation reactor designs cannot directly apply those correlations to advanced coolants, such as liquid metal, which has very low Prandtl number. Direct Numerical Simulation (DNS) is one of the promising approaches to study the details of fluid flow and heat transfer using first principles. The advances of high performance computing (HPC) in recent years made it possible to apply DNS to a wide variety of flow conditions. Kim and Moin studied heat transfer in fully developed turbulent channel flow using DNS. Kawamura et al. investigated the turbulent heat transfer in channel flow with low to medium-high Prandtl number fluid (ranging between 0.025 and 5.0). They take Reynolds number effects into consideration as well. However, most of these studies focus on medium and high Prandtl number. Low Prandtl number flow (like liquid metal) DNS studies are very limited. In the presented research the effect of low Prandtl number is studied in the turbulent channel flow. The second-order accurate spatial and time discretization is used for the flow solver in the presented work. The instantaneous velocity and temperature fields are visualized in the simulation. The effect of Prandtl number on the heat transfer is investigated by comparing different turbulent flow cases. In the same hydrodynamic conditions, the heat conduction enhances as the Prandtl number decreases in the low Prandtl number range. The behavior of the thermal boundary layer follows the empirical correlation. As the Prandtl number decreases, the conductive sublayer region becomes wider, where is out of the range of the empirical correlation. In the future work, we plan to estimate the Nusselt number as well to compare the total heat transfer rate with respect to different Prandtl number flow, especially the very low Prandtl number cases.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effects of a visual fidelity criterion on the encoding of images

Shannon's rate-distortion function provides a potentially useful lower bound against which to compare the rate-versus-distortion performance of practical encoding-transmission systems. However, this bound is not applicable unless one can arrive at a numerically-valued measure of distortion which is in reasonable correspondence with the subjective evaluation of the observer or interpreter. We have attempted to investigate this choice of distortion measure for monochrome still images. This investigation has considered a class of distortion measures for which it is possible to simulate the optimum (in a rate-distortion sense) encoding. Such simulation was performed at a fixed rate for various measures in the class and the results compared subjectively by observers. For several choices of transmission rate and original images, one distortion measure was fairly consistently rated as yielding the most satisfactory appearing encoded images.

Mannos, J. L.↗

Comparative Assessment and Decision Support System for Strategic Military Airlift Capability

The Lockheed Martin Aeronautics Company has been awarded several programs to modernize the aging C-5 military transport fleet. In order to ensure its continuation amidst budget cuts, it was important to engage the decision makers by providing an environment to analyze the benefits of the modernization program. This paper describes an interface that allows the user to change inputs such as the scenario airfields, take-off conditions, and reliability characteristics. The underlying logistics surrogate model was generated using data from a discrete-event simulation. Various visualizations such as intercontinental flight paths illustrated in 3D, have been created to aid the user in analyzing scenarios and performing comparative assessments for various output logistics metrics. The capability to rapidly and dynamically evaluate and compare scenarios was developed enabling real time strategy exploration and trade-offs.

Salmon, John↗