Search NASA⌕ Search

SEARCH · Search NASA

Results for “Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

The modulation of low energy galactic cosmic rays

It has been clearly established by several different experiments that following the last solar maximum (about 1969), there was a significant phase lag or hysteresis effect between changes in the low rigidity galactic cosmic rays and the high rigidity components. It was possible to explain this in terms of the diffusion-convection-modulation theory by varying either the diffusion coefficient or the size of the modulation region as a function of time. During the ensuing recovery phase of the solar modulated spectra, at the mid point toward the minimum of the solar activity, new striking features have been observed, and these new observations are discussed.

Van Hollebeke, M. A. I.↗

A hysteresis effect in cosmic ray modulation

The rigidity dependence is investigated in the modulation of cosmic ray protons and alphas at intermediate (2-13 Gv) rigidities during the declines and recoveries of the cosmic ray flux near cosmic ray minimum. The results include the finding that sudden changes in the modulation of the primary cosmic rays are initiated by large solar particle outflow and begin as type I Forbush decreases. Typically, the modulation spectrum becomes flatter at intermediate rigidity below 13 Gv and steeper at rigidities above 13 Gv during early recovery.

Verschell, H. J.↗

Solar modulation

The important aspects of solar modulation of galactic cosmic rays are outlined. The conditions in the interplanetary medium that affect the modulation are summarized, and equations are developed to describe the behavior of cosmic rays in the solar system, including the effects of diffusion, convection, and energy loss due to adiabatic deceleration in the expanding solar wind. The particle diffusion coefficient is determined from the power spectra of interplanetary magnetic field irregularities. After some solutions for the modulation equations have been derived, the probable forms of the unmodulated cosmic ray spectra are discussed. Other topics include solar cycle variations, energy loss effects, anisotrophies, and gradients.

Fisk, L. A.↗

Earth Observatory Satellite system definition study. Report 5: System design and specifications. Volume 3: General purpose spacecraft segment and module specifications

The specifications for the Earth Observatory Satellite (EOS) general purpose aircraft segment are presented. The satellite is designed to provide attitude stabilization, electrical power, and a communications data handling subsystem which can support various mission peculiar subsystems. The various specifications considered include the following: (1) structures subsystem, (2) thermal control subsystem, (3) communications and data handling subsystem module, (4) attitude control subsystem module, (5) power subsystem module, and (6) electrical integration subsystem.

Source record↗

Earth Observatory Satellite system definition study. Report 5: System design and specifications. Volume 4: Mission peculiar spacecraft segment and module specifications

The specifications for the Earth Observatory Satellite (EOS) peculiar spacecraft segment and associated subsystems and modules are presented. The specifications considered include the following: (1) wideband communications subsystem module, (2) mission peculiar software, (3) hydrazine propulsion subsystem module, (4) solar array assembly, and (5) the scanning spectral radiometer.

Source record↗

A stable, linear frequency-modulated oscillator, part 1

The development of a push-pull frequency-modulated oscillator employing field-effect transistors is described. The advantages of field-effect transistors for use in a frequency-stable oscillator are presented. Linearization of the frequency deviation was accomplished by utilizing the square-law characteristic of an FET used as a modulating amplifier. The push-pull oscillator model produced a linear frequency deviation of more than 10 MHz at a center frequency of approximately 100 MHz. Output power is within 0.6 db of a nominal +8.5 dBm over the desired frequency range, and the modulation bandwidth is dc to 10 MHz. Frequency variation with temperature after compensation with a negative-temperature-coefficient capacitor is within + or - 0.05% from 0 to 60 C.

Honnell, M. A.↗

Design and test of a 100 ampere-hour nickel cadmium battery module

A feasibility study was conducted on the design and construction of a flight-worthy replaceable battery module consisting of four 100 A.H. nickel-cadmium rechargeable cells for large manned space vehicles. The module is planned to weigh less than 43 pounds and be fully maintainable in a zero-g environment by one man without use of special tools. An active environmental control system was designed for the temperature control of the module.

Gaston, S.↗

Modulation of Jovian interplanetary electrons and the longitude variation of decametric emissions

The relationship between modulation of the intensity and energy spectrum of relativistic interplanetary electrons originating from Jupiter's magnetosphere and longitudinal asymmetry in decametric radio emissions from the surface is discussed. Modulation minima are correlated with the time when the subsolar point on Jupiter is near the longitude of the most frequent non-Io-related decametric emissions. The probability of observing such emissions is graphed as a function of the System III central meridian longitude of an observer and the angle of Io past superior conjunction. It is suggested that the modulation of interplanetary electrons and the longitudinal asymmetry of decametric emissions may be due to the same unknown longitudinally asymmetric feature on Jupiter.

Vasyliunas, V. M.↗

Facility and test support equipment for the manned thermal vacuum tests of the Apollo Soyuz docking module

In order to accommodate manned thermal-vacuum testing of the Apollo-Soyuz docking module (ASDM), modifications to the facility, cleanliness and access control, and special test equipment were required. Facility modifications discussed briefly include: the addition of an oxygen supply system; the modification of manlock (ML) piping for cleaning and access controls; the addition of a nitrogen diluent system; the removal of manlock internal lights and the addition of external lights as well as fusing all power circuits over 10 watts; the removal/containment of flammable materials; the upgrading of a ML fire suppression system; and the addition of a garment donning station for cleanliness control. Special test equipment discussed include: an access tunnel for crew ingress/egress; a support device for the docking module (DM) and simulators; a command module thermal simulator; a DM infrared (IR) simulator; a docking system IR simulator; a metabolic heat load simulator; and a television camera simulator.

Pearson, O. L.↗

Design of multi-mission chemical propulsion modules for planetary orbiters. Volume 1: Summary report

Results are presented of a conceptual design and feasibility study of chemical propulsion stages that can serve as modular propulsion units, with little or no modification, on a variety of planetary orbit missions, including orbiters of Mercury, Saturn, and Uranus. Planetary spacecraft of existing design or currently under development, viz., spacecraft of the Pioneer and Mariner families, are assumed as payload vehicles. Thus, operating requirements of spin-stabilized and 3-axis stabilized spacecraft have to be met by the respective propulsion module designs. As launch vehicle for these missions the Shuttle orbiter and interplanetary injection stage, or Tug, plus solid-propellant kick motor was assumed. Accommodation constraints and interfaces involving the payloads and the launch vehicle are considered in the propulsion module design. The applicability and performance advantages were evaluated of the space-storable high-energy bipropellants. The incentive for using this advanced propulsion technology on planetary missions is the much greater performance potential when orbit insertion velocities in excess of 4 km/sec are required, as in the Mercury orbiter. Design analyses and performance tradeoffs regarding earth-storable versus space-storable propulsion systems are included. Cost and development schedules of multi-mission versus custom-designed propulsion modules are examined.

Source record↗

Instruction manual, Optical Effects Module, Model OEM

The Optical Effects Module Model OEM-1, a laboratory prototype instrument designed for the automated measurement of radiation transmission and scattering through optical samples, is described. The system comprises two main components: the Optical Effects Module Enclosure (OEME) and the Optical Effects Module Electronic Controller and Processor (OEMCP). The OEM is designed for operation in the near UV at approximately 2540A, corresponding to the most intense spectral line activated by the mercury discharge lamp used for illumination. The radiation from this source is detected in transmission and reflection through a number of selectable samples. The basic objective of this operation is to monitor in real time the accretion of possible contamination on the surface of these samples. The optical samples are exposed outside of the OEME proper to define exposure conditions and to separate exposure and measurement environments. Changes in the transmissivity of the sample are attributable to surface contamination or to bulk effects due to radiation. Surface contamination will increase radiation scattering due to Rayleigh-Gans effect or to other phenomena, depending on the characteristics size of the particulate contaminants. Thus, also scattering from the samples becomes a part of the measurement program.

Source record↗

Waveguide lasers with intracavity electrooptic modulators - Misalignment loss

Coupling from the EH(11) fundamental mode of a square, hollow bore waveguide laser to a square electrooptic modulator is treated. The misalignment loss that results from coupling of the laser fundamental mode into higher order modulator modes is calculated. Results are presented for loss from transverse displacement, angular tilt, and axial separation of the two elements. From these results, the alignment tolerances required to minimize loss for an intracavity modulator are found.

Henderson, D. M.↗

Possible evidence for latitude-dependent cosmic-ray modulation

It is suggested that the slope of the modulated proton spectrum at low energies (less than 250 MeV) is not well accounted for in a steady state spherically symmetrical cosmic-ray modulation model and therefore may contain information on the effects of latitude variations. Under quasi-steady interplanetary conditions, slopes steeper than unity have been observed for low-energy protons. It is shown that the slope of unity or a steeper slope may be a natural consequence of having a region of enhanced modulation lying immediately above or below the solar equatorial plane and therefore may be due to the variation of interplanetary conditions with heliocentric latitude.

Fisk, L. A.↗

The staging system: Display and edit module

The Display and Edit (D and E) Module described is one of six major modules being developed for the STAGING (STructural Analysis through Generalized INteractive Graphics) System. Several remarks are included concerning the computer environment and the architecture of the data base. The utility of this module is emphasized.

Edwards, E.↗

Frequency modulated oscillator

A frequency modulated push-pull oscillator in which the non-linear characteristic of varactors producing frequency modulation is compensated for by an opposite non-linear characteristic of a field effect transistor providing modulating bias to the varactors is described.

Honnell, M. A.↗

Quadrature-multiplex modulation system with application to the Orbiter's Ku-Band link

This paper describes a new frequency multiplex scheme called quadrature-multiplex (QM) modulation which generates the interplexed signal with a simpler system structure and even smaller intermodulation loss than the interplex modulation system under a situation where the data rate of one signal is much greater than those of other signals to be multiplexed. A QM modulator and receiver systems are proposed. The performances of the QM systems are evaluated and compared to the interplex systems. Some design curves are obtained to help the communication systems engineer design the QM system. Finally, a signal is designed using the QM for the Orbiter's Ku-Band return link.

Park, K. Y.↗

Compound hydraulic shear-modulated vortex amplifiers

A novel two-stage shear-modulated hydraulic vortex amplifier (U.S. patent 3,520,317) has been fabricated and put through preliminary steady-state testing at the 1000 psi supply pressure level with flows up to 15 gpm. The invention comprises a conventional fluidic vortex power stage and a shear-modulated pilot stage. In the absence of any mechanical moving parts, water may be used as the hydraulic medium thus opening the way to many underseas applications. At blocked load, a control input from 0 to 150 psi was required to achieve an output from 0 to 900 psi; at wide-open load, a control input of 0 to 120 psi was needed to achieve an output from 0 to 15 gpm. The power stage has been found unsuitable for the proportional control mode because of its nonlinear performance in the intermediate load range and because of strong pressure fluctuations (plus or minus 150 psi) in the intermediate control range. The addition of the shear-modulated pilot stage improves intermediate load linearity.

Goldschmied, F. R.↗

Effects of particle drift on cosmic-ray transport. I - General properties, application to solar modulation

Although gradient and curvature drifts are explicitly contained in the general equations of cosmic-ray transport, they have been almost universally neglected in applications of these equations. The drifts are evaluated explicitly for the Parker (1965) spiral magnetic field, and it is shown that for particles with rigidities greater than about 0.3 GV in the solar wind, they are larger than the solar-wind velocity over much of the heliosphere. Hence most current models of solar modulation and solar-flare particle events neglect terms which in many cases are as important as those retained. Calculations are presented which demonstrate the importance of the effects for simple modulation models. It is concluded that comparisons of presently available model calculations with observations do not provide a fair test of transport theory since they neglect drifts, which may substantially reduce the net modulation.

Jokipii, J. R.↗