Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Low cost silicon solar array project silicon materials task: Establishment of the feasibility of a process capable of low-cost, high volume production of silane (step 1) and the pyrolysis of silane to semiconductor-grade silicon (step 2)

Extended operation of a small process-development unit routinely produced high quality silane in 97+% yield from dichlorosilane. The production rate was consistent with design loadings for the fractionating column and for the redistribution reactor. A glass fluid-bed reactor was constructed for room temperature operation. The behavior of a bed of silcon particles was observed as a function of various feedstocks, component configurations, and operating conditions. For operating modes other than spouting, the bed behaved in an erratic and unstable manner. A method was developed for casting molten silicon powder into crack-free solid pellets for process evaluation. The silicon powder was melted and cast into thin walled quartz tubes that sacrificially broke on cooling.

Breneman, W. C.↗
NASA NTRS1978

Low Cost Silicon Solar Array Project. Feasibility of Low-cost, High-volume Production of Silane and Pyrolysis of Silane to Semiconductor-grade Silicon

The presence of copper promotes a more rapid approach to the steady stete operating condition and results in a more consistent reactor effluent composition. The average kinetic and equilibrium yield are unchanged. Incoloy has been identified as the preferred choice of material of construction for the hydrogenation reactor although certain metallurgical changes were noted in samples exposed to the H2/HCl atmosphere at 500 C which indicate the need for more testing.

Breneman, W. C.↗
NASA NTRS1979

Pyrolysis of polymeric materials. I - Effect of chemical structure, temperature, heating rate, and air flow on char yield and toxicity

Various polymeric materials, including synthetic polymers and cellulosic materials, were evaluated at different temperatures, heating rates and air flow rates for thermophysical and toxicological responses. It is shown that char yields appeared to be a function of air access as much as of the chemical structure of the material. It is stated that the sensitivity of the apparent thermal stability of some materials to air access is so marked that thermogravimetric studies in oxygen-free atmospheres may be a consistently misleading approach to comparing synthetic polymers intended to increase fire safety. Toxicity also appeared to be a function of temperature and air access as much as of the chemical structure of the material. Toxicity of the gases evolved seemed to increase with increasing char yield for some polymers.

Hilado, C. J.↗
NASA NTRS1979

Pyrolysis of polymeric materials. II - Effect of chemical structure and temperature on char yield and flammability

Various polymeric materials were evaluated at different temperatures for relative flammability as defined by the HC value, a measure of the concentration of combustibles related to the concentration representing the lower limit of flammability. Flammability generally decreased with increasing char yield. This appears to support the hypothesis that increasing char yield decreases flammability by reducing the probability of reaching the lower flammable limits.

Hilado, C. J.↗
NASA NTRS1978

Relative toxicity of pyrolysis gases from materials - Effects of chemical composition and test conditions

Relative toxicity test data on 270 materials are presented, based on test procedures developed at the University of San Francisco. The effects of chemical composition, using data on 13 types of synthetic polymers and eight types of fabrics, are discussed. Selected materials were evaluated using nine test conditions with the USF method, and using methods developed at the FAA Civil Aeromedical Institute, Douglas Aircraft Company and San Jose State University.

Hilado, C. J.↗
NASA NTRS1979

Screening materials for toxicity of pyrolysis gases

The USF-NASA toxicity screening test method is primarily intended to indicate which materials are more toxic under specific test conditions, and not necessarily to explain why they are more toxic. Analysis of the test data obtained, however, in the light of the experience accumulated, can provide some insight into the mechanisms of toxicity and the importance of specific toxicants. The use of free-field movement offers both advantages and disadvantages relative to other behavioral paradigms, and the use of Swiss Webster mice offers both advantages and disadvantages relative to other species and strains.

Hilado, C. J.↗
NASA NTRS1981

Molten salt pyrolysis of latex

Latex-rich plants such as Guayule or extracts thereof are pyrolyzed in an inert nitrogen atmosphere inorganic salt melts such as a LiCl/KCl eutectic at a temperature of about 500 C. The yield is over 60% of a highly aromatic, combustible hydrocarbon oil suitable for use as a synthetic liquid fuel.

Bauman, A. J.↗
NASA NTRS1981

Silane pyrolysis in a free-space reactor

The Union Carbide process for producing silicon for photovoltaic applications proceeds via high purity silane as an intermediate. Decomposition of silane is accomplished in a freespace reactor which utilizes recirculating product hydrogen and silicon to transfer energy from a heated wall to an entering silane jet. Reaction occurs away from the wall, minimizing problems with wall deposition and contamination. A series of long duration and throughput tests has proven the feasibility of this concept. High purity powder can be produced at flows up to 4.5 kg/hr (10 lb/hr) in a 0.2 m (8 inch) diameter reactor with better than 99.99% conversion efficiency. This work is funded by DOE under JPL's Low Cost Solar Array (LSA) program.

Lay, J. R.↗
NASA NTRS1984

Combined Silane Pyrolysis and Silicon-Particle Melt

Melter directly coupled to pyrolyzer eliminates difficulties of transport. Proposed coupling of free-space silane pyrolyzer and melter without intervening steps produce molten silicon with no problems of fine-particle movement, storage, contamination in transport, or oxide formation.

Levin, H.↗
NASA NTRS1984

Highly photoconducting O2-doped CdS films deposited by spray pyrolysis

CdS films have been prepared by spraying in air solutions of thiourea with either cadmium chloride or cadmium acetate with varying mole ratio and substrate temperature, and subsequently heat treating in oxygen. Substrates included both bare glass or sapphire and transparent conducting oxide-coated sapphire for electrical measurements lateral and transverse to the CdS plane, respectively. Dark resistances of over 10 to the 14th ohms and light-to-dark conductivities of up to 10 to the 7th were obtained using uncoated substrates. The use of Cd(C2H3O2)2 in place of CdCl2 greatly increased the speed of response although with some sacrifice in photoconductivity. Deposition of CdS on ITO-coated surfaces led to greatly reduced dark resistances for the case of CdCl2, but not Cd(C2H3O2)2, presumably due to HCl reaction with the ITO coating in the course of spraying with the former. Ion microprobe analysis detected indium within the CdS films exhibiting low dark resistance. Measurements of the dark and light conductivities at temperatures down to 77 K are given as are the response times for unetched and HCl-etched surfaces.

Richards, D.↗
NASA NTRS1985

High-Purity Silicon Seeds for Silane Pyrolysis

Seed particles for fluidized-bed production of silicon made by new contamination-free, economical method. In new method, large particles of semiconductor-grade silicon fired at each other by high-speed streams of gas and thereby break up into particles of suitable size for fluidized bed. No foreign materials introduced, and leaching unnecessary. Method used to feed fluidized-bed reactor for continuous production of high-purity silicon.

Hsu, G. C.↗