Search NASA⌕ Search

SEARCH · Search NASA

Results for “atom migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Intergranular corrosion of Ni-30Cr in high-temperature hydrogenated water after removing surface passivating film

Abstract High-resolution transmission electron microscopy and atom probe tomography are used to characterize the initial passivation and subsequent intergranular corrosion of degraded grain boundaries in a model Ni-30Cr alloy exposed to 360 °C hydrogenated water. Upon initial exposure for 1000 h, the alloy surface directly above the grain boundary forms a thin passivating film of Cr 2 O 3 , protecting the underlying grain boundary from intergranular corrosion. However, the metal grain boundary experiences severe Cr depletion and grain boundary migration during this initial exposure. To understand how Cr depletion affects further corrosion, the local protective film was sputtered away using a glancing angle focused ion beam. Upon further exposure, the surface fails to repassivate, and intergranular corrosion is observed through the Cr-depleted region. Through this combination of high-resolution microscopy and localized passive film removal, we show that, although high-Cr alloys are resistant to intergranular attack and stress corrosion cracking, degradation-induced changes in the underlying metal at grain boundaries make the material more susceptible once the initial passive film is breached.

(S)TEM↗

In-situ Characterization of CuFe2O4 and Cu/Fe3O4 Water-Gas Shift Catalysts

Mixtures of copper and iron oxides are used as industrial catalysts for the water-gas shift (WGS, CO + H2O → H2 + CO2). In-situ time-resolved X-ray diffraction, X-ray absorption fine structure, and atomic pair distribution function analysis were used to study the reduction of CuFe2O4 with CO and the behavior of CuFe2O4 and Cu/Fe2O3 catalysts under WGS reaction conditions. Metal↔oxygen↔metal interactions enhance the stability of Cu2+ and Fe3+ in the CuFe2O4 lattice, and the mixed-metal oxide is much more difficult to reduce than CuO or Fe2O3. Furthermore, after heating mixtures of CuFe2O4/CuO in the presence of CO or CO/H2O, the cations of CuO migrate into octahedral sites of the CuFe2O4 lattice at temperatures (200-250 oC) in which CuO is not stable. Above 250 oC, copper leaves the oxide, the occupancy of the octahedral sites in CuFe2O4 decreases, and diffraction lines for metallic Cu appear. From 350 to 450 oC, there is a massive reduction of CuFe2O4 with the formation of metallic Cu and Fe3O4. At this point, the sample becomes catalytically active for the production of H2 from the reaction of H2O with CO. Neutral Cu0 (i.e. no Cu+1 or Cu+2 cations) is the active species in the catalysts, but interactions with the oxide support are necessary in order to obtain high catalytic activity. These studies illustrate the importance of in-situ characterization when dealing with mixed-metal oxide WGS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Characterization of CuFe2O4 and Cu/Fe3O4 Water-Gas Shift Catalysts

Mixtures of copper and iron oxides are used as industrial catalysts for the water-gas shift (WGS, CO + H2O f H2 + CO2). In-situ time-resolved X-ray diffraction, X-ray absorption fine structure, and atomic pair distribution function analysis were used to study the reduction of CuFe2O4 with CO and the behavior of CuFe2O4 and Cu/Fe2O3 catalysts under WGS reaction conditions. MetalToxygenTmetal interactions enhance the stability of Cu 2+ and Fe 3+ in the CuFe2O4 lattice, and the mixed-metal oxide is much more difficult to reduce than CuO or Fe2O3. Furthermore, after heating mixtures of CuFe2O4/CuO in the presence of CO or CO/H2O, the cations of CuO migrate into octahedral sites of the CuFe2O4 lattice at temperatures (200-250 C) in which CuO is not stable. Above 250 C, copper leaves the oxide, the occupancy of the octahedral sites in CuFe2O4 decreases, and diffraction lines for metallic Cu appear. From 350 to 450 C, there is a massive reduction of CuFe2O4 with the formation of metallic Cu and Fe3O4. At this point, the sample becomes catalytically active for the production of H2 from the reaction of H2O with CO. Neutral Cu 0 (i.e., no Cu 1+ or Cu 2+ cations) is the active species in the catalysts, but interactions with the oxide support cannot be neglected. These studies illustrate the importance of in situ characterization when dealing with mixed-metal oxide WGS catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An integrated approach for structural characterization of complex solid state electrolytes: the case of lithium lanthanum titanate

For neutron scattering and first principles simulation we integrate them to reveal the atomic-level to nanoscale structure of lithium lanthanum titanate (LLTO), a representative solid electrolyte material with applications in Li-ion batteries. Furthermore, the integrated approach solves the hierarchical local structure of LLTO in detail, including the coupled chemical order and topological distortion, as well as their correlation length scale and the spatial modulation with coherent boundaries. Ab initio molecular dynamics simulations are used to map out the distribution of the mobile ions and identify the migration pathway. This integrated approach provides a powerful means for detailed study of materials with complex local chemical and topological environment.

25 ENERGY STORAGE↗

Origin of Hund's multiplicity rule in singly excited helium: Existence of a conjugate Fermi hole in the lower spin state

The origin of Hund's multiplicity rule in the low-lying excited states of the helium atom has been studied by considering the two-dimensional helium atom. The internal part of the full configuration interaction wave functions for the (2s) and (2p) singlet-triplet pairs of states has been extracted and visualized in the three-dimensional internal space (r{sub 1},r{sub 2}, {phi}{sub -}). The internal wave function of the singlet states without electron repulsion has a significant probability around the origin of the internal space while the corresponding probability of the triplet wave function is negligible in this region due to the presence of a Fermi hole. The electron-electron repulsion potential has been visualized also in the internal space. It manifests itself by three striking poles penetrating exactly into the spatial region defined by the Fermi hole. Because of the existence of these strong potential poles in the vicinity of the Fermi hole a major part of the singlet probability migrates out of this region. In contrast, the corresponding triplet wave function is less affected by these poles due to the presence of the Fermi hole. The singlet probability is shown to migrate from its original region close to the origin to a region far away where either r{sub 1} or r{sub 2} are large. This results in a more diffuse electron density distribution and a smaller electron repulsion energy of the singlet state than of the corresponding triplet state. The mechanism of the evolution of the singlet probability toward the region of large r{sub i} (i =1, 2) in the presence of the electron repulsion potential has been rationalized on the basis of a new concept called conjugate Fermi hole.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oxygen vacancy defects in Ta{sub 2}O{sub 5} showing long-range atomic re-arrangements

The structure, formation energy, and energy levels of the various oxygen vacancies in Ta{sub 2}O{sub 5} have been calculated using the λ phase model. The intra-layer vacancies give rise to unusual, long-range bonding rearrangements, which are different for each defect charge state. The 2-fold coordinated intra-layer vacancy is the lowest cost vacancy and forms a deep level 1.5 eV below the conduction band edge. The 3-fold intra-layer vacancy and the 2-fold inter-layer vacancy are higher cost defects, and form shallower levels. The unusual bonding rearrangements lead to low oxygen migration barriers, which are useful for resistive random access memory applications.

36 MATERIALS SCIENCE↗

Sliding of coherent twin boundaries

Coherent twin boundaries (CTBs) are internal interfaces that can play a key role in markedly enhancing the strength of metallic materials while preserving their ductility. They are known to accommodate plastic deformation primarily through their migration, while experimental evidence documenting large-scale sliding of CTBs to facilitate deformation has thus far not been reported. We show here that CTB sliding is possible whenever the loading orientation enables the Schmid factors of leading and trailing partial dislocations to be comparable to each other. This theoretical prediction is confirmed by real-time transmission electron microscope experimental observations during uniaxial deformation of copper pillars with different orientations and is further validated at the atomic scale by recourse to molecular dynamics simulations. Our findings provide mechanistic insights into the evolution of plasticity in heavily twinned face-centered cubic metals, with the potential for optimizing mechanical properties with nanoscale CTBs in material design.

36 MATERIALS SCIENCE↗

Acetylene-vinylidene isomerization in ultrashort intense laser fields studied by triple ion-coincidence momentum imaging

The isomerization of acetylene via hydrogen migration in intense laser fields (8x10{sup 14} W/cm{sup 2}) has been investigated by coincidence momentum imaging of the three-body Coulomb explosion process, C{sub 2}H{sub 2}{sup 3+}{yields}H{sup +}+C{sup +}+CH{sup +}. When ultrashort (9 fs) laser pulses are used, the angle between the momenta of C{sup +} and H{sup +} fragments exhibits a sharp distribution peaked at a small angle ({approx}20 deg.), showing that the hydrogen atom remains near the original carbon site in the acetylene configuration. On the other hand, a significantly broad distribution extending to larger momentum angles ({approx}120 deg.) is observed when the pulse duration is increased to 35 fs, indicating that the ultrafast isomerization to vinylidene is induced in the longer laser pulse.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluation of electrochemical performance and redox activity of Fe in Ti doped layered P2-Na0.67Mn0.5Fe0.5O2 cathode for sodium ion batteries

Here, we report a wet synthesis-based titanium doping strategy to improve the structural stability and electrochemical performances, such as cycling stability and rate capability, of P2-type Na 0.67 Fe 0.5 Mn 0.5 O 2 layered oxide cathodes. Through Ti 4+ doping aimed at replacing some of the Mn and Fe atoms in the crystal structure, effective mitigation of the Jahn Teller distortion caused by active Mn 3+ before charging and Fe 4+ after charging was achieved. X-ray diffraction (XRD), Raman spectroscopy, Electrochemical Impedance Spectroscopy (EIS) and Mössbauer spectroscopy were used to investigate the effects of the Ti 4+ dopant before and after cycling. It was observed that Ti 4+ doping increased the Na layer thickness, minimized the lattice volume strain, showed better structural stability, minimally decreased Fe migration to the Na layer, and lowered charge transfer resistance in these P2-type cathodes. Overall, our reported synthesis methodology and electrochemical characterizations highlight the feasibility of Ti doping in sodium layered oxide P2-type cathodes.

25 ENERGY STORAGE↗

Engineering defect energy landscape of CoCrFeNi high-entropy alloys by the introduction of additional dopants

The concept of high-entropy alloys (HEAs) focusing on tuning the overall chemical complexity represents a novel alloy design strategy. In contrast, alloying of a metallic matrix with minor doping elements with limited and localized tunability has been a common practice to improve material performance. Combining the idea of globally engineering defect energy landscape in HEAs and the localized doping strategy in dilute alloys, in this work, we explore doping effects of minor elements in a HEA matrix to further enhance the overall and localized chemical tunability, aiming to improve its irradiation resistance. Specifically, we study the influence of minor Al, Cu, Ti, and Pd substitutional doping elements on defect energetics in a CoCrFeNi model HEA based on density-functional theory (DFT) calculations. The DFT results indicate that the formation and migration energies of vacancies can be strongly influenced when a dopant is introduced at the first nearest neighbor shells around a vacancy. On the other hand, interstitial energetics are only slightly affected. Among the four elements, Ti and Pd generally decrease vacancy formation energies and increase vacancy migration energies more significantly than Al and Cu. The doping effects become more pronounced when the concentration of the substitutional dopants increases. Based on the energy distributions obtained from DFT, we build a kinetic Monte Carlo (kMC) model to assess the impact of dopants on vacancy-mediated diffusivity in the doped HEAs. Our results suggest that Ti and Pd can lower the tracer diffusivity in the considered HEAs and act as trapping sites, whereas Cu may enhance the atomic transport. This work indicates that substitutional doping in HEAs is an effective strategy in metallurgy to further tune the defect and transport properties of complex alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Vacancy dynamic in Ni-Mn-Ga ferromagnetic shape memory alloys

Vacancies control any atomic ordering process and consequently most of the order-dependent properties of the martensitic transformation in ferromagnetic shape memory alloys. Positron annihilation spectroscopy demonstrates to be a powerful technique to study vacancies in NiMnGa alloys quenched from different temperatures and subjected to post-quench isothermal annealing treatments. Considering an effective vacancy type the temperature dependence of the vacancy concentration has been evaluated. Samples quenched from 1173 K show a vacancy concentration of 1100 ± 200 ppm. The vacancy migration and formation energies have been estimated to be 0.55 ± 0.05 eV and 0.90 ± 0.07 eV, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural features and deuterium diffusion in lithium penta-aluminate pellets under He + and D + ion irradiation

Lithium (Li) penta-aluminate (LiAl 5 O 8 ) is investigated as a potential tritium (T) breeding material, with a focus on microstructural response to ion irradiation and deuterium (D) diffusion behavior. Under high-fluence ion irradiation (2 x 10 17 (He + +D + )/cm 2 ) at 773 K, LiAl 5 O 8 exhibits significant disorder on the Li sublattice, as revealed by atomic-resolution scanning transmission electron microscopy, while the Al and O sublattices remain stable, demonstrating strong resistance to structural amorphization. Irradiation induces the formation of platelet-shaped antiphase boundaries (APBs), which may serve as effective D trapping sites. Atom probe tomography suggests the presence of 6 LiD clusters in the mass spectra, though definite conclusions regarding APB composition are hindered by signal overlap and limited data statistics. Time-of-flight secondary ion mass spectrometry reveals that D retention approaches to saturation at 3 x 10 17 (He + +D + )/cm 2 . Isothermal and isochronal annealing studies determine an average diffusivity of 1.6 x 10 -13 at 773 K and an effective activation energy of 0.8 ± 0.1 eV for D migration. Compared to γ-LiAlO 2 , LiAl 5 O 8 demonstrates superior irradiation resistance, minimal Li loss, and enhanced D retention, underscoring its potential as a durable breeder material for T production. In conclusion, these findings provide key insights into the microstructural evolution, defect dynamics, and D retention mechanisms in LiAl 5 O 8 under reactor-relevant conditions.

42 ENGINEERING↗

Disentangling the evolution of electrons and holes in photoexcited ZnO nanoparticles

The evolution of charge carriers in photoexcited room temperature ZnO nanoparticles in solution is investigated using ultrafast ultraviolet photoluminescence spectroscopy, ultrafast Zn K-edge absorption spectroscopy, and ab initio molecular dynamics (MD) simulations. The photoluminescence is excited at 4.66 eV, well above the band edge, and shows that electron cooling in the conduction band and exciton formation occur in <500 fs, in excellent agreement with theoretical predictions. The x-ray absorption measurements, obtained upon excitation close to the band edge at 3.49 eV, are sensitive to the migration and trapping of holes. They reveal that the 2 ps transient largely reproduces the previously reported transient obtained at 100 ps time delay in synchrotron studies. In addition, the x-ray absorption signal is found to rise in ∼1.4 ps, which we attribute to the diffusion of holes through the lattice prior to their trapping at singly charged oxygen vacancies. Indeed, the MD simulations show that impulsive trapping of holes induces an ultrafast expansion of the cage of Zn atoms in <200 fs, followed by an oscillatory response at a frequency of ∼100 cm−1, which corresponds to a phonon mode of the system involving the Zn sub-lattice.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Atomic-Scale Characterization of Oxide Thin Films Gated by Ionic Liquid

Ionic liquids (ILs) have been considered for use in electrostatic gating in complex oxide systems. Understanding the ionic liquid/oxide interface, and any bias-induced electrochemical degradation, is critical for the interpretation of transport phenomena. The integrity of the interface between ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate and La 1/3 Sr 2/3 FeO 3 under various biasing conditions was examined by analytical transmission electron microscopy, and we report film degradation in the form of an irreversible chemical reaction regardless of the applied bias. This results in an intermixing region of 4–6 nm at the IL/oxide interface. Electron energy loss spectroscopy shows La and Fe migration into the ionic liquid, resulting in secondary phase formation under negative bias. Our approach can be extended to other ionic liquid/oxide systems in order to better understand the electrochemical stability window of these device structures.

36 MATERIALS SCIENCE↗

Safety Functions and Features, Events and Processes for the E-Area Performance Assessment

The DOE Technical Standard, “Disposal Authorization Statement and Tank Closure Documentation,” (DOE 2017) recommends the use of safety functions and features, events and processes (FEPs) to support development of conceptual models and identification of scenarios to be considered in a performance assessment (PA). The FEP process provides a means to describe how a PA considers and addresses the factors that could influence the performance of key barriers. Understanding the roles of barriers in terms of limiting migration helps to focus on how changes in the system could lead to a situation where those roles cannot be fulfilled and there is the potential for compromised performance. The FEPs screening and review process was used to identify FEPs that are relevant for the EArea Low-Level Waste Facility (LLWF) and specifically those FEPs that could have a detrimental impact on the effectiveness of a given safety function. For this PA, a default list of FEPs developed at the International Atomic Energy Agency (IAEA 2004) and an approach implemented for PAs at the Hanford and Idaho sites (Mehta et al. 2016, DOE-ID 2019) are used to identify processes and events that could influence the effectiveness of a given safety function for the E-Area LLWF (e.g., subsidence can impact the safety function of the cover system and lead to increased infiltration). The Hanford and Idaho PAs represent two of the most recent applications of this approach. The PA evaluates the potential impacts of changes in performance of different features of the system and demonstrates that the safety functions represent multiple and redundant barriers. Barrier analyses, assuming a safety function is not present, also test the robustness of the system in the event of the loss of one or more safety functions. Such evaluations also support a qualitative illustration of the concept of defense in depth. The safety concept for closure of the E-Area LLWF (generically referred to as “E-Area”) encompasses a variety of different features (i.e., administrative controls, natural site features, and engineered barriers) that reduce the potential impacts on human health and the environment from the residual waste that will remain after closure. These features can be represented as a collection of safety functions acting independently and as a system to provide for overall safety. In some applications, there have been attempts to assign numerical expectations to specific safety functions, but that is not the intent in this case. The concept of safety functions is used more qualitatively in two ways for this PA: 1. To illustrate the robustness of the E-Area design, operational practices and closure approach by documenting features that are and are not credited in different modeling cases. 2. To identify the roles of the different features and potential processes and events that could compromise the performance of safety features and need to be considered when developing the modeling approach. This report addresses both safety functions and FEPs for the E-Area PA.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗