Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

A SOLENOID WITH A UNIFORM MAGNETIC FIELD

This paper gives an analysis and description of a solenoid, which creates a uniform magnetic field around the greatest part of its length, The winding of the solenoid has a constant diameter and is assembled from sections with varying current density. The field constancy in the described construction attains +-0.07% and is determined by the accuracy of preparation of the windings. An effective system of cooling of the windings is proposed. The given system of winding makes it possible to obtain magnetic fields of several tens of kilo-oersteds.

Kapitsa, S P↗

Photon counter with pile-up rejection

Technologies are described for methods and systems effective to detect photon receiving events. A first comparator may compare a magnitude of a photon signal to a first threshold voltage to produce a first output. A second comparator may compare the magnitude of the photon signal to a second threshold voltage to produce a second output. A counter control circuit may increment a second counter in response to a determination that the magnitude of a first peak of the photon signal exceeds and then falls below the second threshold voltage. The counter control circuit may prevent a third counter from incrementing in response to a second peak of the photon signal. The counter control circuit may increment the first counter in response to the magnitude of the signal exceeding and then falling below the first threshold voltage. The first counter may be associated with a number of photon receiving events detected.

47 OTHER INSTRUMENTATION↗

Formation of superhydrophobic surfaces

Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material. The methods may comprise applying a removal agent effective to remove the polymer block domains to the infiltrated block copolymer to generate a pattern of the material. The methods may comprise etching the substrate. The pattern of the material may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate. The methods may comprise removing the pattern of the material and coating the nanostructures and the surface of the substrate with a hydrophobic coating.

Checco, Antonio↗

Formation of antireflective surfaces

Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The patterned block copolymer may include first and second polymer block domains. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material in the first polymer block domain. The methods may comprise applying a removal agent to the infiltrated block copolymer to generate a patterned material. The removal agent may be effective to remove the first and second polymer block domains from the substrate. The methods may comprise etching the substrate. The patterned material on the substrate may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate.

36 MATERIALS SCIENCE↗

X-ray filter for x-ray powder diffraction

Technologies are described for apparatus, methods and systems effective for filtering. The filters may comprise a first plate. The first plate may include an x-ray absorbing material and walls defining first slits. The first slits may include arc shaped openings through the first plate. The walls of the first plate may be configured to absorb at least some of first x-rays when the first x-rays are incident on the x-ray absorbing material, and to output second x-rays. The filters may comprise a second plate spaced from the first plate. The second plate may include the x-ray absorbing material and walls defining second slits. The second slits may include arc shaped openings through the second plate. The walls of the second plate may be configured to absorb at least some of second x-rays and to output third x-rays.

Sinsheimer, John Jay↗

Flex plate with removable inserts and cover

Technologies are described for methods and systems effective for flex plates. The flex plates may comprise a base plate. The base plate may include walls that define an insert location opening in the base plate. The insert location opening in the base plate may be in communication with a securement area. The flex plates may comprise an insert. The insert may include a reservoir region and a crystallization region separated by a wall including channels. The reservoir region and the crystallization region may include a backing. The insert may further include securement tabs. The securement tabs may be configured to secure the insert to the base plate at the securement area.

42 ENGINEERING↗

Closure Strategy for Operable Unit III of the Monticello Mill Tailings Site

Multiple strategies and scenarios were evaluated to advance Operable Unit (OU) III of the Monticello Mill Tailings Site (MMTS) towards closure. MMTS is a former mill site that was used to process uranium and vanadium ore in southeastern Utah until 1960. Uranium is the primary contaminant of concern in OU III, which includes surface water in Montezuma Creek and groundwater present in a shallow alluvial aquifer along the creek valley for several miles downgradient of the former mill site. Surface remedial actions were completed in 2000. In 2004, the selected final remedy was monitored natural attenuation (MNA) and institutional controls, and a pump-and-treat system installed in the highest-concentration area as a contingency remedy. The pump-and-treat system was expanded in 2015, and average uranium concentrations have declined locally over time. However, monitoring data and column studies suggest that the system effectiveness will continue to decrease over time. Three closure strategies were considered: restoration of MNA; alternate concentration limits; and a technical impracticability (TI) waiver. The preferred closure strategy is to restore MNA and maintain institutional controls, without active remediation. The strategy includes demonstrating criteria for MNA acceptance, pump-and-treat termination, long-term monitoring, and eventual site delisting. Several potential scenarios for transitioning to the preferred closure strategy were identified. Recommended actions over the next few years include updating the conceptual site model, conducting numerical modeling to predict remedial performance and time frames, geochemical analyses to assess uranium transport, and summarizing the lines of evidence and basis for MNA.

remediation, uranium, groundwater, monitored natur↗

Formation of antireflective surfaces

Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The patterned block copolymer may include first and second polymer block domains. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material in the first polymer block domain. The methods may comprise applying a removal agent to the infiltrated block copolymer to generate a patterned material. The removal agent may be effective to remove the first and second polymer block domains from the substrate. The methods may comprise etching the substrate. The patterned material on the substrate may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate.

Black, Charles T.↗

Flex plate with removable inserts and cover

Technologies are described for methods and systems effective for flex plates. The flex plates may comprise a base plate. The base plate may include walls that define an insert location opening in the base plate. The insert location opening in the base plate may be in communication with a securement area. The flex plates may comprise an insert. The insert may include a reservoir region and a crystallization region separated by a wall including channels. The reservoir region and the crystallization region may include a backing. The insert may further include securement tabs. The securement tabs may be configured to secure the insert to the base plate at the securement area.

Soares, Alexei S.↗

Q-VR: System-Level Design for Future Mobile Collaborative Virtual Reality

High Quality Mobile Virtual Reality (VR) is what the incoming graphics technology era demands: users around the world, regardless of their hardware and network conditions, can all enjoy the immersive virtual experience. However, the state-of-the-art software-based mobile VR designs cannot fully satisfy the realtime performance requirements due to the highly interactive nature of user's actions and complex environmental constraints during VR execution. Inspired by the unique human visual system effects and the strong correlation between VR motion features and realtime hardware-level information, we propose Q-VR, a novel dynamic collaborative rendering solution via software-hardware co-design for enabling future low-latency high-quality mobile VR. At software-level, Q-VR provides flexible high-level tuning interface to reduce network latency while maintaining user perception. At hardware-level, Q-VR accommodates a wide spectrum of hardware and network conditions across users by effectively leveraging the computing capability of the increasingly powerful VR hardware. Extensive evaluation on real-world games demonstrates that Q-VR can achieve an average end-to-end performance speedup of 3.4x (up to 6.7x) over the traditional local rendering design in commercial VR devices, and a 4.1x frame rate improvement over the state-of-the-art static collaborative rendering.

Xie, Chenhao↗

Formation of antireflective surfaces

Technologies are described for methods and systems effective for etching nanostructures in a substrate. The methods may comprise depositing a patterned block copolymer on the substrate. The patterned block copolymer may include first and second polymer block domains. The methods may comprise applying a precursor to the patterned block copolymer to generate an infiltrated block copolymer. The precursor may infiltrate into the first polymer block domain and generate a material in the first polymer block domain. The methods may comprise applying a removal agent to the infiltrated block copolymer to generate a patterned material. The removal agent may be effective to remove the first and second polymer block domains from the substrate. The methods may comprise etching the substrate. The patterned material on the substrate may mask the substrate to pattern the etching. The etching may be performed under conditions to produce nanostructures in the substrate.

Black, Charles T.↗

Breakthrough curve analysis of pressure swing adsorption for hydrogen isotope separation

For the purpose of developing an effective system for hydrogen isotope separation, we have been studying the adsorption-desorption dynamic behavior of hydrogen and deuterium in a packed-bed column with synthetic zeolites, aimed at applying the pressure swing adsorption process. The adsorption behavior of molecules in the packed-bed is reflected in the breakthrough curves. To understand the characteristic behaviors of hydrogen isotopes in the packed-bed, we carried out breakthrough experiments in a conventional adsorption process and in a practical process following sequential processes alternating between adsorption and desorption. From the former experiments, the results were obtained that the overall mass transfer was influenced by longitudinal dispersion relating to the superficial velocity and that the process governing the mass transfer within adsorbents was diffusion in the macro-pores of pellets. In the latter experiments, unique profile breakthrough curves were observed. These curves can be described with the numerical simulation assuming the initial distributions in a packed-bed. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Next generation retrofit wall panels with integrated vacuum insulation panels

Approximately two-thirds of residential buildings in the United States were constructed before the Department of Energy established energy conservation measures. These buildings present major opportunities for improving energy efficiency, though retrofitting them remains technically and economically challenging. This study presents the development and the durability evaluation of an innovative retrofit panel system that integrates vacuum insulation panels (VIP) with a nail-base panel (called a retrofit insulated panel) to enhance thermal performance with minimal disruption to occupants and without altering standard nail-based panel installation practices. Hygrothermal simulations were conducted to assess the moisture behavior of wall assemblies before and after retrofit installation under varying water vapor control strategies and climate conditions. Results indicate that, with appropriate moisture control strategy, the retrofit system effectively prevents moisture accumulation, keeping mold index values and relative humidity levels below critical thresholds. Additionally, Guarded Hot Box testing was performed to compute the effective R-value of the panel under different coverage areas that demonstrates its effectiveness in enhancing both thermal and moisture performance in existing residential buildings.

Iffa, Emishaw [ORNL]↗

SU-F-T-52: Study of Energy Dependent Effect of Dosimetry Systems Used in Therapeutic Soft X-Ray Energy Range

Purpose: To investigate energy dependent effects of different dosimetry systems which can be used as in vivo dosimetry monitoring for intraoperative radiotherapy in therapeutic soft x-ray energy range. Methods: Three dosimetry systems were evaluated in therapeutic soft x-ray energy range: optically stimulated luminescent dosimeter (OSLD) nanoDots, radiochromic EBT2 and EBT3 films. The x-ray photons were produced by a Zeiss Intrabeam 50 kV x-ray radiotherapy system. Solid water and bolus slabs with different thicknesses were used in the process of irradiation. An aluminum filter set was used to measure HVLs of X-rays. Calibration curves were made at different depth of boluses. Results: Half Value Layers at depths of 0, 3, 10, and 20 mm of solid water were measured to represent the energy change versus depth, yielding 0.306, 0.482, 0.865 and 0.901 respectively and indicating nearly unchanged HVL beyond 1 cm depth. The responses of each system at different depths were normalized to the response at 2 cm depth. In film dosimetry, the response is calculated as optical density (OD). The results show that there is nearly the same energy dependence for EBT2 and EBT3. At a HVL of 0.482 mm Al, the relative responses of nanoDots and EBT3 are 0.85 ± 0.04 and 0.89 ± 0.03 compared to those at 0.901 mm Al HVL, respectively, indicating no obvious difference between those two systems within the measurement uncertainty. Conclusion: It was observed that the studied dosimeter response increases about 13% from the x-ray energy of 0.48 mm Al to 0.90 mm Al. Therefore, caution should be exercised in using an appropriate calibration curve, and x-ray beam hardening effect has to be taken into account.

60 APPLIED LIFE SCIENCES↗

Apparatus and systems for incorporating effective transparent catalyst for photoelectrochemical application

Photoelectrochemical (PEC) technology for the conversion of solar energy into chemicals may require cost-effective photoelectrodes to efficiently and stably drive anodic and/or cathodic half-reactions to complete the overall reactions for storing solar energy in chemical bonds. Apparatus and systems incorporating effectively transparent metal catalysts enable the design and/or implementation of PEC devices for light harvesting. Triple-junction photocathodes with the triangular catalyst grids are provided to improve the efficiency of the photocathodes to generate renewable fuel from sunlight.

Cheng, Wen-Hui↗

Effects of adaptive task allocation on monitoring of automated systems

The effects of adaptive task allocation on monitoring for automation failure during multitask flight simulation were examined. Participants monitored an automated engine status task while simultaneously performing tracking and fuel management tasks over three 30-min sessions. Two methods of adaptive task allocation, both involving temporary return of the automated engine status task to the human operator ("human control"), were examined as a possible countermeasure to monitoring inefficiency. For the model-based adaptive group, the engine status task was allocated to all participants in the middle of the second session for 10 min, following which it was again returned to automation control. The same occurred for the performance-based adaptive group, but only if an individual participant's monitoring performance up to that point did not meet a specified criterion. For the nonadaptive control groups, the engine status task remained automated throughout the experiment. All groups had low probabilities of detection of automation failures for the first 40 min spent with automation. However, following the 10-min intervening period of human control, both adaptive groups detected significantly more automation failures during the subsequent blocks under automation control. The results show that adaptive task allocation can enhance monitoring of automated systems. Both model-based and performance-based allocation improved monitoring of automation. Implications for the design of automated systems are discussed.

Task Performance and Analysis↗