Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Chemical Interpretation of Charged Point Defects in Semiconductors: A Case Study of Mg 2 Si

The electronic structures of charged point defects influence electrical and optical properties of semiconductors. Understanding the orbital interactions responsible for the electronic structures of defects therefore promotes a chemical intuition for defect-driven mechanisms in semiconductors. In this tutorial, we discuss a molecular orbital theory-based framework for understanding defect-induced electronic states based on local chemical interactions between the defect and the atoms surrounding the defect site. By using Mg 2 Si as a case study, we show how both the chemical interactions and molecular orbitals (i. e., wave functions) responsible for the charge state(s) of a defect can be understood from the bonding symmetry of the defect site. We anticipate that a chemistry-based perspective of charged defects will enrich defect engineering efforts for electronic and optical materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Local structure and Ca/Si ratio in C-S-H gels from hydration of blends of tricalcium silicate and silica fume

At the microscale, C-S-H gels from alite, or neat Portland cements, has a Ca/Si ratio close to 1.80. At the nanoscale, C-S-H is described by a defective tobermorite structure which allows a maximum Ca/Si ratio close to 1.40. There is no agreement in the location of the extra 0.40 mol of Ca(OH){sub 2} at the nanoscale. Atomistic modelling studies reported Ca(OH){sub 2} species within the tobermorite interlayer space. Other works point toward a fine intermixing of defective tobermorite and nanoportlandite. Here, we have prepared a series of alite blended with silica fume and studied the pastes by several techniques including synchrotron pair distribution function (PDF). In the employed conditions, the C-S-H gel formed by the pozzolanic reaction has nearly the same local structure than the primary C-S-H gel. Furthermore, differential PDF points toward Ca(OH){sub 2} excess having a local structure compatible with few-layer thick nanoparticles stretched along the c-axis.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Understanding of a Novel Irradiation-induced Nanostructuring Process in SiC layer of TRISO fuel particles via Transmission Electron Microscopy

Metallic fission products are found to transport through the SiC layer of the tristructural isotropic (TRISO) nuclear fuel particle and various studies have been undertaken to understand the transport behavior [1, 2]. While the grain boundaries in SiC acts as a primary pathway to dissipate fission products in the form of multi-phased complex compounds, intragranular fission product precipitation has always been observed. Research on neutron irradiation damage tolerance of silicon carbide (SiC) and its composites, used in TRISO fuel, light water reactors (LWR) fuel cladding etc., has traditionally ignored the irradiation-induced “polymorphism” of SiC. In the post-irradiation advanced microscopy effort at Idaho National Laboratory, it has been recently discovered that the intragranular precipitation of fission products in SiC layer of TRISO coated fuels takes place via a dual step nucleation mechanism that involves cubic (?) ?hexagonal (?) SiC polymorphic transition, and subsequent metamorphosis of ?-SiC into fission product precipitates, as shown in Figure 1 [3]. This precipitation behavior cannot be explained by any reported nucleation mechanism. The extent of this precipitation has been observed to be influenced by the nature of the neutron irradiation induced damage structures. These damage structures (e.g., defect morphology and density) are also indicative of the irradiation temperature and neutron fluence levels experimented by the individual TRISO particles. The distinction of neutron irradiation damage structures as a function of the fuel kernel type, burn up level and fabrication histories of TRISO coated particles from the Advanced Gas reactor (AGR-1 and AGR-2) experiments has been examined and compared. This discovery not only adds new fundamental understanding of physical behavior of polymorphic ceramics under irradiation, but also provides the following beneficial traits for high temperature applications. 1) Since the extent of precipitation of the desired phase is directly dependent on the amount of precursor phase, the volume fraction of desired phase can be easily controlled by irradiation parameters. This eliminates the conventional limitation of volume fraction of a desired phase in the system as outlined by the phase diagram of the specific system. 2) Most of the precipitate-strengthened materials for high temperature applications suffer from degradation of size and shape of precipitate upon prolonged thermal exposures. But, precipitates are confined to the shape and size of the morphological template of surrogate phase (e.g. a Pd silicide precipitate is confined by the ?-SiC as shown in Figure 1(c)) in the present nucleation pathway. Hence, there is no possibility of desired phase to undergo any morphological degradation at high temperature that eventually will extend the lifetime of these materials at high temperature.

42 ENGINEERING↗
DOE OSTI2018

IR Thermographic Analysis of 3D Printed CFRP Reference Samples with Back-Drilled and Embedded Defects

Carbon-fiber composite structures may demonstrate a defective behavior due to manufacturing induced anomalies (delamination, dis-bonds) or service related defectives (impact damage, water ingress). Thus, there is a need for a relatively fast and low cost non-intrusive testing schemes such as infrared thermography (IRT). Still, thermography testing requires calibrated samples and coupons to yield best results. The presented research demonstrates the novel use of 3D printing technology to generate IRT calibration samples. In this text, two carbon fiber reinforced polymer samples are 3D printed; the first mimics a 'back-drilled holes' type coupons, while the other is designed to embed air pockets similar to Teflon inserts. The generated samples are then tested using two IRT modalities; namely pulse thermography and lock-in thermography. Furthermore, the resulted thermograms are processed using a principle component analysis, to help highlight the variance of defectives in a consistent manner among the samples. This research findings offer insights on the variation of detectability between embedded and back-printed samples, which might be due to the inserts thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ground States of Crystalline Caps: Generalized Jellium on Curved Space

We study the ground states of crystals on spherical surfaces. Here, these ground states consist of positive disclination defects in structures spanning from flat and weakly curved caps to closed shells. Comparing two continuum theories and one discrete-lattice simulation, we first investigate the transition between defect-free caps to single-disclination ground states and show it to be continuous and symmetry breaking. Further, we show that ground states adopt icosahedral subgroup symmetries across the full range of curvatures, even far from the closure of complete shells. While superficially similar to other models of 2D “jellium” (e.g., superconducting disks and 2D Wigner crystals), the interplay between the free edge of caps and the non-Euclidean geometry of its embedding leads to nontrivial ground state behavior that is without counterpart in planar jellium models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Defect-Driven Redox Interplay on Anatase TiO 2 : Surface-Structure Dependent Activation for CO 2 Hydrogenation Catalysis

Titanium dioxide (TiO 2 ) is one of the most extensively studied oxides as an active catalyst or catalyst support, particularly in energy and environmental applications, but the atomistic mechanisms governing its dynamic response to reactive environments and their correlation to reactivity remain largely elusive. Using in situ environmental transmission electron microscopy (ETEM), synchrotron X-ray diffraction (XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), temperature-programmed reduction (TPR), reactivity measurements, and theoretical modeling, we reveal the dynamic interplay between oxygen loss and replenishment of anatase TiO 2 under varying reactive conditions. Under H 2 exposure, anatase TiO 2 undergoes surface reduction via lattice oxygen loss, forming Ti 3 O 5 . In contrast, CO 2 exposure induces oxygen replenishment, reversing stoichiometry. In mixed H2/CO 2 environments, the reverse water–gas shift (RWGS) reaction proceeds selectively on stepped and high-indexed TiO 2 surfaces, whereas the thermodynamically stable TiO 2 (101) surface remains inactive and intact. Critically, H 2 pretreatment generates oxygen vacancies on TiO 2 (101), transforming it into an active Ti 3 O 5 or defect-rich surface that catalyzes RWGS. By correlating surface structure, defect dynamics, and gas-phase interactions, this work deciphers the competition between H 2 -driven reduction and CO 2 -driven oxidation pathways at the atomic scale. Furthermore, these insights establish defect engineering as a strategic lever to activate inert TiO 2 facets, advancing the design of adaptive catalysts for sustainable fuel synthesis technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Visualizing the Internal Nanocrystallinity of Calcite Due to Nonclassical Crystallization by 3D Coherent X–Ray Diffraction Imaging

The internal crystallinity of calcite is investigated for samples synthesized using two approaches: precipitation from solution and the ammonium carbonate diffusion method. Scanning electron microscopy (SEM) analyses reveal that the calcite products precipitated using both approaches have a well–defined rhombohedron shape, consistent with the euhedral crystal habit of the mineral. The internal structure of these calcite crystals is characterized using Bragg coherent diffraction imaging (BCDI) to determine the 3D electron density and the atomic displacement field. BCDI reconstructions for crystals synthesized using the ammonium carbonate diffusion approach have the expected euhedral shape, with internal strain fields and few internal defects. In contrast, the crystals synthesized by precipitation from solution have very complex external shapes and defective internal structures, presenting null electron density regions and pronounced displacement field distributions. These heterogeneities are interpreted as multiple crystalline domains, created by a nonclassical crystallization mechanism, where smaller nanoparticles coalescence into the final euhedral particles. The combined use of SEM, X–ray diffraction (XRD), and BCDI allows for structurally differentiating calcite crystals grown with different approaches, opening new opportunities to understand how grain boundaries and internal defects alter calcite reactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metallic line defect in wide-bandgap transparent perovskite BaSnO 3

A line defect with metallic characteristics has been found in optically transparent BaSnO 3 perovskite thin films. The distinct atomic structure of the defect core, composed of Sn and O atoms, was visualized by atomic-resolution scanning transmission electron microscopy (STEM). When doped with La, dopants that replace Ba atoms preferentially segregate to specific crystallographic sites adjacent to the line defect. The electronic structure of the line defect probed in STEM with electron energy-loss spectroscopy was supported by ab initio theory, which indicates the presence of Fermi level–crossing electronic bands that originate from defect core atoms. These metallic line defects also act as electron sinks attracting additional negative charges in these wide-bandgap BaSnO 3 films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Integrating computation and experiment to investigate photoelectrodes for solar water splitting at the microscopic scale.

CONSPECTUS: Photoelectrochemical water-splitting is a promising and sustainable way to store the energy of the sun in chemical bonds and use it to produce hydrogen gas, a clean fuel. The key components in photoelectrochemical cells (PECs) are photoelectrodes, including a photocathode that reduces water to hydrogen gas and a photoanode that oxidizes water to oxygen gas. Materials used in photoelectrodes for PECs must effectively absorb sunlight, yield photogenerated carriers, and exhibit electronic properties that enable the efficient shuttling of carriers to the surface to participate in relevant water-splitting reactions. Discovering and understanding the key characteristics of optimal photoelectrode materials is paramount to the realization of PEC technologies. Oxide-based photoelectrodes can satisfy many of these materials requirements, including stability in aqueous environments, band edges with reasonable alignment with the redox potentials for water splitting, and ease of synthesis. However, oxide photoelectrodes generally suffer from poor charge transport properties and considerable bulk electron-hole separation, and they have relatively large band gaps. Numerous strategies have been proposed to improve these aspects and understand how these improvements are reflected in the photoelectrochemical performance. Unfortunately, the structural and compositional complexity of multinary oxides accompanied by the inherent complexity of photoelectrochemical processes makes it challenging to understand the individual effects of composition, structure, and defects in the bulk and on the surface on a material's photoelectrochemical properties. The integration of experiment and theory has great potential to increase our atomic-level understanding of structure-composition-property relationships in oxide photoelectrodes. In this Account, we describe how integrating experiment and theory is beneficial for achieving scientific insights at the microscopic scale. We highlight studies focused on understanding the role of (i) bulk composition via solid-state solutions, intercalation, and comparison with isoelectronic compounds, (ii) dopants for both the anion and cation and their interactions with oxygen vacancies, and (iii) surface/interface structure in the photocurrent generation and photoelectrochemical performance in oxide photoelectrodes. In each instance, we outline strategies and considerations for integrating experiment and theory and describe how this integration led to valuable insights and new directions in uncovering structure-composition-property relationships. Our aim is to demonstrate the unique value of combining experiment and theory in studying photoelectrodes and to encourage the continued effort to bring experiment and theory in closer step with each other.

Wang, Wennie↗
DOE OSTI2018

Examining the Chemical and Structural Properties that Influence the Sensitivity of Energetic Nitrate Esters

The sensitivity of explosives is controlled by factors that span from intrinsic chemical reactivity and chemical intramolecular effects to mesoscale structure and defects, and has been a topic of extensive study for over 50 years. Due to these complex competing chemical and physical elements, a unifying relationship between molecular framework, crystal structure, and sensitivity has yet to be developed. In order to move towards this goal, ideally experimental studies should be performed on systems with small, systematic structural modifications, with modeling utilized to interpret experimental results. Pentaerythritol tetranitrate (PETN) is a common nitrate ester explosive that has been widely studied due to its use in military and commercial explosives. We have synthesized PETN derivatives with modified sensitivity characteristics by substituting the CCH 2 ONO 2 moiety with other substituents, including CH, CNH 2 , CNH3X, CCH 3 , and PO. We relate the handling sensitivity properties of each PETN derivative to its structural properties, and discuss the potential roles of thermodynamic properties such as heat capacity and heat of formation, thermal stability, crystal structure, compressibility, and inter- and intramolecular hydrogen bonding on impact sensitivity. Reactive molecular dynamics (MD) simulations of the C/H/N/O-based PETN-derivatives have been performed under cook-off conditions that mimic those accessed in impact tests. As a result, these simulations infer how changes in chemistry affect the subsequent decomposition pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Point defects and impurities in fluorite PuO 2

The native surface oxide of plutonium plays a critical role in ensuring the stability and safe storage of the underlying metal; consequently, understanding the role of defects and impurities in determining the properties of the oxide layer is critical. Here, in this study, we use hybrid density-functional theory calculations to evaluate the electronic structure and defect chemistry of PuO 2 , the most stable of the native oxide phases, including both native and extrinsic defects. We find that oxygen vacancies (𝑉 O ) form readily in PuO 2 , as do polarons. Electron polarons (𝜂 − ) are the lowest-energy acceptor species in PuO 2 , while the charge compensating donor species will shift from 𝑉 O under O-poor conditions to hole polarons (𝜂 + ) under O-rich conditions. Nitrogen and fluorine can substitute readily for oxygen atoms under O-poor conditions, while fluorine can also incorporate in an interstitial configuration (F$^−_i$) under more O-rich conditions. Carbon and chlorine incorporation in PuO 2 will be very limited. We also evaluate the kinetic barriers for oxygen-related defects, which we find to diffuse readily when present. Our results provide valuable insights into the critical role and variable chemistry of point defects and impurities in PuO 2 , which in turn have important implications for the safe storage of the underlying metal layer. In short, exposure of freshly prepared plutonium to reactive nitrogen- and fluorine-containing contaminants should be avoided, while carbon- or chlorine-containing contaminants are less likely to incorporate readily into the oxide.

Materials science↗
NASA NTRS1979

Structure and electrical activity of planar defects in EFG ribbons

Optical, electron beam induced current (EBIC), and transmission electron microscopy were used to study the structure and electrical activity of planar defects in EFG silicon. What appears to be twin boundaries by both optical microscopy plus etching, and by EBIC are in reality systems of microtwins, some of which are only a few atomic lattice planes thick. The electrical activity of planar defects appears to be correlated with emission of dislocations especially at termination points. Impurity effects may also play a role. Twin boundaries per se appear not to be electrically active.

Ast, D. G.↗
DOE OSTI2021

Multi defect detection and analysis of electron microscopy images with deep learning

Electron microscopy is widely used to explore defects in crystal structures, but human detecting of defects is often time-consuming, error-prone, and unreliable, and is not scalable to large numbers of images or real-time analysis. In this work, we discuss the application of machine learning approaches to find the location and geometry of different defect clusters in irradiated steels. We show that a deep learning based Faster R-CNN analysis system has a performance comparable to human analysis with relatively small training data sets. Furthermore, this study proves the promising ability to apply deep learning to assist the development of automated microscopy data analysis even when multiple features are present and paves the way for fast, scalable, and reliable analysis systems for massive amounts of modern electron microscopy data.

36 MATERIALS SCIENCE↗
DOE OSTI2024

ZIF-8 Vibrational Spectra: Peak Assignments and Defect Signals

In this study, Zeolitic Imidazolate Framework-8 (ZIF-8) is a promising material for gas separation applications. It also serves as a prototype for numerous ZIFs, including amorphous ones, with a broader range of possible applications, including sensors, catalysis, and lithography. It consists of zinc coordinated with 2-methylimidazolate (2mIm) and has been synthesized with methods ranging from liquid-phase to solvent-free synthesis, which aim to control its crystal size and shape, film thickness and microstructure, and incorporation into nanocomposites. Depending on the synthesis method and post-synthesis treatments, ZIF-8 materials may deviate from the nominal defect-free ZIF-8 crystal structure due to defects like missing 2mIm, missing zinc, and physically adsorbed 2mIm trapped in the ZIF-8 pores, which may alter its performance and stability. Infra-red (IR) spectroscopy has been used to assess the presence of defects in ZIF-8 and related materials. However, conflicting interpretations by various authors persist in the literature. Here, we systematically investigate ZIF-8 vibrational spectra by combining experimental IR spectroscopy and first-principles molecular dynamics simulations, focusing on assigning peaks and elucidating the spectroscopic signals of putative defects present in ZIF-8 material. We attempt to resolve conflicting assignments from the literature and to provide a comprehensive understanding of the vibrational spectra of ZIF-8 and its defect-induced variations, aiming towards more precise quality control and design of ZIF-8-based materials for emerging applications.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Molecular dynamics of reactions between (4,0) zigzag carbon nanotube and hydrogen peroxide under extreme conditions

Single-wall carbon nanotubes (CNTs) have been suggested as potential materials for use in next-generation gas sensors. The sidewall functionalisation of CNTs facilitates gas molecule adsorption. In this study, density functional theory (DFT)-based ab initio molecular dynamics simulations are performed for a periodic zigzag single-wall (4,0) CNT surrounded by a monolayer of hydrogen peroxide molecules in an attempt to find conditions that favour sidewall functionalisation. The dependency of dynamics on charge states of the system is examined. It is found negative charges favour reactions that result in the functionalisation of the CNT. First principles molecular dynamics of defect formation yields chemically reasonable structure of stable defects, which can be reproduced in CNTs of any diameter and chirality. The explored hydroxyl and hydroperoxyl defects increase conductivity in a large diameter (10,0) CNT, while decrease conductivities in a small diameter (4,0) CNT.

Disrud, Brendon↗
NASA NTRS1966

Quenched-in defects in Mo-35Re

Feasibility of using quenched-in defect technique to study effect of rhenium on vacancy clustering in Mo-35Re

CRYSTAL STRUCTURE DEFECT↗