Search NASA⌕ Search

SEARCH · Search NASA

Results for “Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Development of a thermal storage module using modified anhydrous sodium hydroxide

The laboratory scale testing of a modified anhydrous NaOH latent heat storage concept for small solar thermal power systems such as total energy systems utilizing organic Rankine systems is discussed. A diagnostic test on the thermal energy storage module and an investigation of alternative heat transfer fluids and heat exchange concepts are specifically addressed. A previously developed computer simulation model is modified to predict the performance of the module in a solar total energy system environment. In addition, the computer model is expanded to investigate parametrically the incorporation of a second heat exchange inside the module which will vaporize and superheat the Rankine cycle power fluid.

Rice, R. E.↗
NASA NTRS1980

Solar site test module

A solar site test module using the Rockwell AIM 65microcomputer is described. The module is designed to work at any site where an IBM site data acquisition system (SDAS) is installed and is intended primarily as a troubleshooting tool. It collects sensor information (temperatures, flow rates, etc.) and displays or prints it immediately in calibrated engineering units. It will read one sensor on demand, periodically read up to 10sensors or periodically read all sensors. Performance calculations can also be included with sensor data. Unattended operation is possible to, e.g., monitor a group of sensors once per hour. Work is underway to add a data acquisition system to the test module so that it can be used at sites which have no SDAS.

Kissel, R. R.↗
NASA NTRS1980

An investigation of the modulation of capillary and short gravity waves in the open ocean

A preliminary investigation of the modulation of capillary and gravity waves by long ocean waves is described. A pressure transducer is used to obtain water surface displacements, and a high-response laser-optical system is used to detect short-wave slopes. Analytical techniques are developed to account for the orbital motion of long waves. The local mean squared wave slope is found to be maximum leeward of the long-wave crests. For the long waves studied here and for short waves from 1 cm to 1 m, the longer a short-wave component is, the more leeward its maximum tends to occur. Also, the shortest waves tend to modulate least. The modulation of short waves is found to be strong enough to be an important component of the synthetic aperture radar image formation mechanism for long ocean waves.

Evans, D. D.↗
NASA NTRS1980

Measurement of minority-carrier drift mobility in solar cells using a modulated electron beam

A determination of diffusivity on solar cells is here reported which utilizes a one dimensional treatment of diffusion under sinusoidal excitation. An intensity-modulated beam of a scanning electron microscope was used as a source of excitation. The beam was injected into the rear of the cell, and the modulated component of the induced terminal current was recovered phase sensitively. A Faraday cup to measure the modulated component of beam current was mounted next to the sample, and connected to the same electronics. A step up transformer and preamplifier were mounted on the sample holder. Beam currents on the order of 400-pA were used in order to minimize effects of high injection. The beam voltage was 34-kV, and the cell bias was kept at 0-V.

Othmer, S.↗
NASA NTRS1980

Recent developments in lightweight solar cell modules

Two types of lightweight solar cell modules were prepared. The goal is to achieve a module with a power to weight ratio of 350 watts per kilogram. Both structures use thin cells approximately 50 micrometers thick and glass covers approximately 75 micrometers thick. In one structure the glass is bonded to the module using 93-500 silicone adhesive; while the other relies on heat and pressure bonding using FEP as the adhesive. Specific powers of about 335 watts per kilogram were achieved.

Broder, J. D.↗
NASA NTRS1981

A 5.57 hour modulation of the X-ray flux of 4U1822-37: A new model for CYG X-3

The X-ray flux of 4U1822-37 is shown to be modulated with the 5.57 hour period of its optical counterpart. The X-ray light curve is two component with a smooth sinusoidal like 25 percent semiamplitude modulation and a 30 minute dip approximately 0.2 in phase following the other minimum. The X-ray spectrum is a relatively flat power law up to 17 keV, above which its steepens. Iron emission is detected at 6.7 keV with a 4 keV FWHM and an equivalent width of 1100 eV. There is an excee below 2 keV that is consistent with either a 0.25 keV thermal component or 350 eV equivalent width iron L emission. A slight softening of the spectrum is seen during both X-ray minima. The dip is interpreted as the partial occultation of an extended cloud of optically thick highly ionized material surrounding the central X-ray source. Modeling the eclipse gives a system inclination of 70-79 deg and a spherical cloud radius of 0.2-0.3 solar radius. Models for the long term modulation are considered. The properties of this source are compared to those of Cyg X-3. It is concluded that they are similar systems.

White, N. E.↗
NASA NTRS1981

Modulated infrared radiant source

A modulated, infrared radiant energy source was developed to calibrate an airborne nadir-viewing pressure modulated radiometer to be used to detect from Earth orbit trace gases in the troposphere. The technique used an 8 cm long, 0.005 cm diameter platinum-iridium wire as an isothermal, thin line radiant energy source maintained at 1200 K. A + or - 20 K signal, oscillating at controllable frequencies from dc to 20 Hz, was superimposed on it. This periodic variation of the line source energy was used to verify the pressure modulated radiometer's capability to distinguish between the signal variations caused by the Earth's background surface and the signal from the atmospheric gases of interest.

Stewart, W. F.↗
NASA NTRS1980

Extended development of a sodium hydroxide thermal energy storage module

The post-test evaluation of a single heat exchanger sodium hydroxide thermal energy storage module for use in solar electric generation is reported. Chemical analyses of the storage medium used in the experimental model are presented. The experimental verification of the module performance using an alternate heat transfer fluid, Caloria HT-43, is described. Based on these results, a design analysis of a dual heat exchanger concept within the storage module is presented. A computer model and a reference design for the dual system (storage working fluid/power cycle working fluid) were completed. The dual system is estimated to have a capital cost of approximately one half that of the single heat exchanger concept.

Rice, R. E.↗
NASA NTRS1980

Modulation theory

Cosmic ray modulation theory is reviewed with regard to microscopic effects, gradients, and drift. It is noted that the three-dimensional structure of the heliosphere has been shown to be very important for the understanding of modulation, even for effects observed in the solar equatorial plane. In addition, recent revisions in the understanding of the magnetic field structure have led to a dramatic change in the understanding of modulation.

Jokipii, J. R.↗
NASA NTRS1979

Carrier - Interference ratios for frequency sharing between satellite systems transmitting frequency modulated and digital television signals

As the data rates required for digitally encoded television are reduced, satellite systems employing the transmission of digitally encoded television will become attractive. It is likely that television transmitted in this format will be adjacent to or in the same frequency band as television transmissions in other modulation formats, so a knowledge of carrier to interference power ratios as a function of assessed picture quality will be required for frequency sharing between these different modulation formats. This paper presents the results of subjective and quantitative tests describing the results of interference to a particular digital television system from a frequency modulated (FM) television system, and for interference to an FM television system from a digital television system.

Barnes, S. P.↗
NASA NTRS1981

Effects of drift on the transport of cosmic rays. IV - Modulation by a wavy interplanetary current sheet

The effect of a wavy interplanetary current sheet on the solar modulation of galactic cosmic rays is studied. A simple model of the heliospheric magnetic field is employed in which there is an Archimedean spiral magnetic field directed in one direction above the current sheet and another direction below. The current sheet itself is taken to be the extension by the solar wind of a surface that, at the sun, is a plane inclined at an angle alpha to the solar equator. Two magnetic sectors will therefore be seen by an observer within an angle alpha of the heliographic equator. A simple approximate model is used to investigate modulation. As the tilt angle alpha is increased from zero, it is found that the cosmic-ray intensity decreases. For reasonable variation of alpha from approximately 10 deg to approximately 30 deg, the change in intensity can be compared to that observed as one goes from solar minimum to solar maximum. It is concluded that changes in the waviness of the interplanetary current sheet can have an important, and perhaps dominant, effect in producing solar modulation of galactic cosmic rays.

Jokipii, J. R.↗
NASA NTRS1980

A generalized formulation of minimum shift keying modulation

The modulator structure consisting of a single-input two-output sequential transducer whose output sequences control the modulated signal in the manner s(t) = x(i)p(t) + y(i)q(t) is considered. Here, iT is less than or equal to t, which is less than iT + T, where T is the modulation bit duration and where x(i) and y(i) take values in /+1, -1, 0/. The behavior of a sequential transducer is characterized by means of a 'trellis'. It is shown that, provided only that the 'carriers' p(t) and q(t) have the same energy in every bit interval, the optimum demodulator for the additive white Gaussian noise channel need process the received signal over only two bit intervals in making each data bit decision. It is demonstrated that particular choices of the sequential transducer yield differential minimum shift keying and differential staggered quadriphase shift keying. Possible generalizations of this approach are discussed.

Massey, J. L.↗
NASA NTRS1981

Modulation of Venus ion densities associated with solar variations

The dayside ion concentrations in the Venus ionosphere obtained by the Pioneer Venus orbiter ion mass spectrometer exhibit a modulation corresponding to the 27-day solar variation. Comparisons were made of the amplitudes of modulation of CO(2(+), C(+), and O2(+), with the amplitudes of the 27-day variation in the 10.7-cm solar radio flux and the simultaneously measured EUV fluxes at He II (304 A) and Lyman-beta(1026 A), together with a theoretical analysis of the effects of solar variability on the ionosphere and neutral atmosphere of Venus. This analysis leads to the conclusion that the observed modulation of dayside ion densities is primarily due to the variability in the ionizing EUV radiations and, to a much lesser extent, the result of the variability with solar activity of the neutral atmosphere via the variability in exospheric temperature. In this connection, it is also shown theoretically why the percentage variation of exospheric temperature on Venus (as observed in the ONMS data) for a given variation in the 10.7-cm radio flux is only half of the exospheric temperature variation for earth.

Bauer, S. J.↗
NASA NTRS1981

A 5.57 hour modulation of the X-ray flux from 4U 1822-37

The X-ray flux of 4U 1822-37 is shown to be modulated with the 5.57 hr period of its optical counterpart. The X-ray light curve is two component, with a smooth sinusoidal-like 25% semiamplitude modulation and a 30 minute dip of approximately 0.2 in phase following the other minimum; the dip center occurs 0.04 in phase after the optical minimum. The X-ray spectrum is a relatively flat power law up to 17 keV, above which it steepens; iron emission is detected at 6.7 keV with a 4 keV FWHM and an equivalent width of 1100 eV. An excess below 2 keV is consistent with either a 0.25 keV thermal component of 350 eV equivalent width iron L emission. Modeling the eclipse for a 0.5-0.7 solar radius companion gives a system inclination of 70-79 deg and a spherical cloud radius of 0.2-0.3 solar radius. Models for the long-term modulation are considered, and a comparison of the properties of 4U 1822-37 with those of Cyg X-3 shows that they are similar systems.

White, N. E.↗
NASA NTRS1981

Microchannel spatial light modulator

The Microchannel Spatial Light Modulator (MSLM), a versatile, highly sensitive, and optically addressed device being developed for real time optical information processing is discussed. The MSLM operates by converting an input optical image into a charge distribution at the surface of an electro-optic crystal. The charge distribution generates an electric field which modulates the refractive index of the crystal and thereby the phase or intensity of an image readout beam. Prototype devices employing 250 micron thick crystals exhibited a spatial resolution of 5 cycles/mm at 50% contrast, an exposure sensitivity of 2.2 nJ/cu cm and framing rates of 40 Hz with full modulation depth. The image processing operations that have been achieved using the internal processing mode of the MSLM include contrast reversal, contrast enhancement, edge enhancement, image addition and subtraction, analog and digital intensity thresholding, and binary level logic operations such as AND, OR, EXCLUSIVE OR, and NOR.

Warde, C.↗
NASA NTRS1981

Commercial/industrial photovoltaic module and array requirement study. Low-cost solar array project engineering area

Design requirements for photovoltaic modules and arrays used in commercial and industrial applications were identified. Building codes and referenced standards were reviewed for their applicability to commercial and industrial photovoltaic array installation. Four general installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Each of the generic mounting types can be used in vertical wall mounting systems. This implies eight mounting types exist in the commercial/industrial sector. Installation costs were developed for these mounting types as a function of panel/module size. Cost drivers were identified. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. The general conclusion is that there are no perceived major obstacles to the use of photovoltaic modules in commercial/industrial arrays.

Source record↗
NASA NTRS1981

Temporal Aperture Modulation

The two types of modulation techniques useful to X-ray imaging are reviewed. The use of optimum coded temporal aperature modulation is shown, in certain cases, to offer an advantage over a spatial aperture modulator. Example applications of a diffuse anisotropic X-ray background experiment and a wide field of view hard X-ray imager are discussed.

Proctor, R. J.↗
NASA NTRS1982

Photovoltaic module encapsulation design and materials selection, volume 1

Encapsulation material system requirements, material selection criteria, and the status and properties of encapsulation materials and processes available are presented. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described. Available encapsulation technology and data are presented to facilitate design and material selection for silicon flat plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. The operational and environmental loads that encapsulation system functional requirements and candidate design concepts and materials that are identified to have the best potential to meet the cost and performance goals for the flat plate solar array project are described. Available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

Cuddihy, E.↗