Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Conjugation‐Curtailing of Benzodithionopyran‐Cored Molecular Acceptor Enables Efficient Air‐Processed Small Molecule Solar Cells

Abstract Small molecule solar cells (SMSCs) lag a long way behind polymer solar cells. A key limit is the less controllable morphology of small molecule materials, which can be aggravated when incorporating anisotropic nonfullerene acceptors. To fine‐tune the blending morphology within SMSCs, a π‐conjunction curtailing design is applied, which produces a efficient benzodithionopyran‐cored molecular acceptor for nonfullerene SMSCs (NF‐SMSCs). When blended with a molecular donor BDT3TR‐SF to fabricate NF‐SMSCs, the π‐conjunction curtailed molecular acceptor NBDTP‐M obtains an optimal power conversion efficiency (PCE) of up to 10.23%, which is much higher than that of NBDTTP‐M of longer π‐conjunction. It retains 93% of the PCE of devices fabricated in a glove box when all spin‐coating and post‐treating procedures are conducted in ambient air with relative humidity of 25%, which suggests the good air‐processing capability of π‐conjunction curtailed molecules. Detailed X‐ray scattering investigations indicate that the BDT3TR‐SF:NBDTP‐M blend exhibits a blend morphology featuring fine interpenetrating networks with smaller domains and higher phase purity, which results in more efficient charge generation, more balanced charge transport, and less recombination compared to the low‐performance BDT3TR‐SF:NBDTTP‐M blend. This work provides a guideline for molecular acceptors' design toward efficient, low‐cost, air‐processed NF‐SMSCs.

Wu, Hao↗

Front contact solar cell with formed emitter

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

14 SOLAR ENERGY↗

Front contact solar cell with formed emitter

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

14 SOLAR ENERGY↗

Very High Efficiency Solar Cell Modules

The Very High Efficiency Solar Cell (VHESC) program is developing integrated optical system - PV modules for portable applications that operate at greater than 50% efficiency. We are integrating the optical design with the solar cell design, and have entered previously unoccupied design space. Our approach is driven by proven quantitative models for the solar cell design, the optical design, and the integration of these designs. Optical systems efficiency with an optical efficiency of 93% and solar cell device results under ideal dichroic splitting optics summing to 42.7 {+-} 2.5% are described.

14 SOLAR ENERGY↗

Low-Frequency Carrier Kinetics in Perovskite Solar Cells

Hybrid organic–inorganic halide perovskite solar cells have emerged as leading candidates for third-generation photovoltaic technology. Despite the rapid improvement in power conversion efficiency (PCE) for perovskite solar cells in recent years, the low-frequency carrier kinetics that underlie practical roadblocks such as hysteresis and degradation remain relatively poorly understood. In an effort to bridge this knowledge gap, we perform here correlated low-frequency noise (LFN) and impedance spectroscopy (IS) characterization that elucidates carrier kinetics in operating perovskite solar cells. Specifically, we focus on planar cell geometries with a SnO2 electron transport layer and two different hole transport layers—namely, poly(triarylamine) (PTAA) and spiro-OMeTAD. PTAA and spiro-OMeTAD cells with moderate PCEs of 5–12% possess a Lorentzian feature at ~200 Hz in LFN measurements that corresponds to a crossover from electrode to dielectric polarization. In comparison, spiro-OMeTAD cells with high PCEs (>15%) show 4 orders of magnitude lower LFN amplitude and are accompanied by a cyclostationary process. Through a systematic study of more than a dozen solar cells, we establish a correlation with noise amplitude, PCE, and fill factor. Overall, this work establishes correlated LFN and IS as an effective methodology for quantifying low-frequency carrier kinetics in perovskite solar cells, thereby providing new physical insights that can rationally guide ongoing efforts to improve device performance, reproducibility, and stability.

14 SOLAR ENERGY↗

High Aspect Ratio Semiconductor Heterojunction Solar Cells

The project focused on the development of high aspect ratio silicon heterojunction (HARSH) solar cells. The solar cells developed in this study consisted of high density vertical arrays of radial junction silicon microwires/pillars formed on Si substrates. Prior studies have demonstrated that vertical Si wire/pillar arrays enable reduced reflectivity and improved light trapping characteristics compared to planar solar cells. In addition, the radial junction structure offers the possibility of increased carrier collection in solar cells fabricated using material with short carrier diffusion lengths. However, the high junction and surface area of radial junction Si wire/pillar array devices can be problematic and lead to increased diode leakage and enhanced surface recombination. This study investigated the use of amorphous hydrogenated Si in the form of a heterojunction-intrinsic-thin layer (HIT) structure as a junction formation method for these devices. The HIT layer structure has widely been employed to reduce surface recombination in planar crystalline Si solar cells. Consequently, it was anticipated that it would also provide significant benefits to the performance of radial junction Si wire/pillar array devices. The overall goals of the project were to demonstrate a HARSH cell with a HIT-type structure in the radial junction Si wire/pillar array configuration and to develop potentially low cost pathways to fabricate these devices. Our studies demonstrated that the HIT structure lead to significant improvements in the open circuit voltage (V oc >0.5) of radial junction Si pillar array devices compared to devices fabricated using junctions formed by thermal diffusion or low pressure chemical vapor deposition (LPCVD). In addition, our work experimentally demonstrated that the radial junction structure lead to improvements in efficiency compared to comparable planar devices for devices fabricated using heavily doped Si that had reduced carrier diffusion lengths. Furthermore, we made significant advances in employing the bottom-up vapor-liquid-solid (VLS) growth technique for the fabrication of the Si wire arrays. Our work elucidated the effects of growth conditions and substrate pattern geometry on the growth of large area Si microwire arrays grown with SiCl4. In addition, we also developed a process to grow p-type Si nanowire arrays using aluminum as the catalyst metal instead of gold. Finally, our work demonstrated the feasibility of growing vertical arrays of Si wires on non-crystalline glass substrates using polycrystalline Si template layers. The accomplishments demonstrated in this project will pave the way for future advances in radial junction wire array solar cells.

14 SOLAR ENERGY↗

Practical anti-reflection coating for metal semiconductor solar cells

The metal-semiconductor solar cell is a possible candidate for converting solar to electrical energy for terrestrial application. A method is given for obtaining optical parameters of practical antireflection coatings for the metal-semiconductor solar cell. This method utilizes the measured refractive index obtained from ellipsometry since the surface to be AR coated has a multilayer structure. Both the experimental results and theoretical calculation of optical parameters for Ta2O5 antireflection coatings on Au-GaAs and Au-GaAs(0.78)P(0.22) solar cells are presented for comparison.

Yeh, Y.-C. M.↗

Practical antireflection coatings for metal-semiconductor solar cells

The metal-semiconductor solar cell is a potential candidate for converting solar energy to electrical energy for space and terrestrial application. In this paper, a method for obtaining parameters of practical antireflection (AR) coatings for the metal-semiconductor solar cells is given. This method utilizes the measured equivalent index of refraction obtained from ellipsometry, since the surface to be AR coated has a multilayer structure. Both the experimental results and theoretical calculations of optical parameters for Ta2O5 AR coatings on Au-GaAs and Au-GaAs(0.78)P(0.22) solar cells are presented for comparison.

Yeh, Y. C. M.↗

Laser process and corresponding structures for forming contact holes of solar cells

Contact holes of solar cells are formed by laser ablation to accommodate various solar cell designs. Use of a laser to form the contact holes is facilitated by replacing films formed on the diffusion regions with a film that has substantially uniform thickness. Contact holes may be formed to deep diffusion regions to increase the laser ablation process margins. The laser configuration may be tailored to form contact holes through dielectric films of varying thicknesses.

14 SOLAR ENERGY↗

Process and structures for fabrication of solar cells

Contact holes of solar cells are formed by laser ablation to accommodate various solar cell designs. Use of a laser to form the contact holes is facilitated by replacing films formed on the diffusion regions with a film that has substantially uniform thickness. Contact holes may be formed to deep diffusion regions to increase the laser ablation process margins. The laser configuration may be tailored to form contact holes through dielectric films of varying thicknesses.

14 SOLAR ENERGY↗

Thin n-i-p radiation-resistant solar cell feasibility study

Silicon solar cells were fabricated to verify the predictions that: (1) thin n(+)pp(+) cells can provide high values of open circuit voltage even when high resistivity base material ( 1000 omega-cm) is used; (2) cells with good p(+) back contacts will display an increase in open circuit voltage with decreasing cell thickness; and (3) high quality, thin, high resistivity, solar cells can be made using processing compatible with conventional practice. Analysis of I-V and spectral response measurements of these cells confirmed theoretical predictions and thereby pointed to voltages beyond the near 600 mV obtained in this study.

Allison, J. F.↗