SEARCH · Search NASA

Results for “Phase patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Oxygen redox chemistry in P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 cathode for high-energy Na-ion batteries

Owing to the abundance of raw material reserves and low cost, Na-ion batteries (NIBs) have successfully gained widespread attention from academic and industrial communities in the past few decades. However, the insufficient cathode energy density is still one of the critical bottlenecks restricting the development of NIBs. Following a strategy of introducing Li+ into the transition-metal (TM) layer to enhance the oxygen redox reaction, a novel layered cathode material P2-Na 0.6 Li 0.11 Fe 0.27 Mn 0.62 O 2 (NLFMO) was designed and successfully synthesized. This NLFMO cathode not only delivers a large initial reversible capacity of 207.3 mA h g -1 , but also shows a good cycling performance (104.2 mA h g -1 after 80 cycles) and rate capability (126.2 mA h g -1 at 1C). The ultrahigh capacity is contributed by both cationic (Fe 3+ /Fe 4+ and Mn 3+ /Mn 4+ ) and partially reversible anionic redox (O 2- /O n- ) reactions, revealed by in situ X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) techniques. Moreover, no detrimental P2–O2 phase transition was observed in ex situ X-ray diffraction (XRD) patterns, confirming the high structural stability during Na + deintercalation/intercalation processes. These results provide valuable information about the high-energy density layered cathode materials based on anionic redox reactions for NIBs.

25 ENERGY STORAGE↗

DOE OSTI2025

Chirality in the Kagome Metal CsV 3 ⁢Sb 5

Using x-ray photoelectron diffraction (XPD) and angle-resolved photoemission spectroscopy, we study photoemission intensity changes related to changes in the geometric and electronic structure in the kagome metal CsV 3 ⁢Sb 5 upon transition to an unconventional charge density wave (CDW) state. The XPD patterns reveal the presence of a chiral atomic structure in the CDW phase. Furthermore, using circularly polarized x-rays, we have found a pronounced nontrivial circular dichroism in the angular distribution of the valence band photoemission in the CDW phase, indicating a chirality of the electronic structure. This observation is consistent with the proposed orbital loop current order. In view of a negligible spontaneous Kerr signal in recent magneto-optical studies, the results suggest an antiferromagnetic coupling of the orbital magnetic moments along the 𝑐 axis. Here, while the inherent structural chirality may also induce circular dichroism, the observed asymmetry values seem to be too large in the case of the weak structural distortions caused by the CDW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Self-generated electrokinetic flows from active-charged boundary patterns

We develop a hydrodynamic description of self-generated electrolyte flow in capillaries whose bounding walls feature nonuniform distributions of charge nonuniform active ionic fluxes. The hydrodynamic velocity arising in such a system has components that are forbidden by symmetry in the absence of charge and fluxes. However, when these two boundary mechanisms are simultaneously present, they can lead to a symmetry broken state where steady flows with both unidirectional and circulatory components emerge. We show that these flow states arise when modulated boundary patterns of charge and fluxes are offset by a flux-charge phase difference, which is associated with the separation between sites of their peak densities on the wall. Mismatch in diffusivity of cationic and anionic species can modify the flow states and becomes an enhancing factor when fluxes of both ion species are being produced together at the same site. We demonstrate that this mechanism can be realized with a microfluidic generator that is powered by enzyme-coated patches that catalyze reactants in the solution to produce fluxes of ions. The local ionic elevation or depletion, which disrupts a nonuniform double layer, promotes self-induced gradients yielding persistent body forces to generate bulk fluid motion. Our work quantifies a boundary-driven mechanism behind self-sustained electrolyte flow in confined environments that exists without any external bulk-imposed fields or gradients. It provides a theoretical framework for understanding the combined effect of active and charged boundaries that are relevant in biological or soft matter systems, and can be utilized in electrofluidic and iontronic applications.

active matter↗

NASA NTRS1978

Technology requirements for an orbital navigation/position finding system

The concept of an orbiting personal navigation system as a possible application for a large space structure is considered. The navigation system would have to be part of a large, integrated, multifunction Information Service Platform to justify its complexity and assured use by a large segment of the civilian population. The navigation configuration is a large cruciform which utilizes a linear phased array antenna design. The two antenna arms generate narrow, orthogonal beam patterns on the ground which are electrically scanned east to west and south to north. A passive ground receiver detecting the beam passage determines the user's position in earth longitude and latitude coordinates.

Lang, A. L., Jr.↗

NASA NTRS1986

On the determination of the origin of linear anomaly in the macrostructure of VPPA welded 2219-T87 aluminum alloy: Preliminary report

The cause and significance of the weld radiograph enigma, which is a linear anomaly in the features of the X-ray film is examined. By observing features on available radiographs and in studying published reports of similar features, it was possible to conclude that there are many manifestations of the enigma, and that they are all specific features of fine structure in radiographs due to natural processes connected with welding and to specific X-ray absorption and diffraction phenomena. These processes include the thermal distribution and liquid metal flow in welding, the development of microstructure, morphology, second phase particles and porosity due to the solidification process, and to the pattern of residual stresses after the weld metal has cooled to the ambient temperature. Microdensitometer traces were made across weld radiographs of standard enigmatic types. Similar patterns were produced by computer simulation. These show that the enigma is a relatively low contrast feature compared to real weld defects, such as undercuts or centerline cracks. The enigma can be distinguished from weld defects by these microdensitometer traces. The enigma effect on weld properties is not known but is expected to be minor.

Jemian, W. A.↗

NASA NTRS1986

On the determination of the origin of linear anomaly in the macrostructure of VPPA welded 2219-T87 aluminum alloy

The objective was to determine the cause and significance of the weld radiograph enigma, which is a linear anomaly in the features of the X-ray film. By observing features on available radiographs and in studying published reports of similar features it was possible to conclude that there are many manifestations of the enigma, and that they are all specific features of fine structure in radiographs due to natural processes connected with welding and to specific X-ray absorption and diffraction phenomena. These processes include the thermal distribution and liquid metal flow in welding, the development of microstructure, morpohology, second phase particles and porosity due to the solidification process and to the pattern of residual stresses after the weld metal has cooled to the ambient temperature. Microdensitometer traces were made across weld radiographs of standard and enigmatic types. Similar patterns were produced by computer simulation. These show that the enigma is a relatively low contrast feature compared to real weld defects, such as undercuts or centerline cracks. The enigma can be distinguished from weld defects by these microdensitometer traces. The enigma effect on weld properties is not known but is expected to be minor.

Jemian, W. A.↗

NASA NTRS1986

Large-scale short-period sea ice atmosphere interaction

Changes in the microwave brightness temperature measured by the Electrically Scanning Microwave Radiometer (ESMR) flown on board the Nimbus V satellite reveal large-scale sea ice fluctuations in the Antarctic marginal ice zone. These ice margin fluctuations arre predominantly wave numbers 1-4, with phase speeds of about 3 m/s independent of wave number. The spatial pattern and eastward advection of the sea ice anomalies match those of the atmospheric sea level pressure, and are consistent with sea ice displacement due to surface wind stress. Examination of the outgoing longwave radiation indicates that suppression of high clouds in regions of increased sea ice inc reases the radiative cooling which contributes to maintaining the ice. Data from three winter seasons indicate about a one-third probability of occurence of this large scale high frequency sea ice atmosphere interaction during any given 2-week period in winter.

Cahalan, Robert F.↗

NASA NTRS1989

Error sources in deferred heterodyne moire deflectometry - An analytical study

The effects of the aperture size and shape of the photodetector and of the structure of the grating lines on the performance of deferred electronic heterodyne moire deflectometry are studied. It is shown that scanning of a moire fringe pattern parallel to an unshifted fringe yields periodical variations in the heterodyne phase and amplitude, which cause severe errors in the measurements.

Stricker, Josef↗

NASA NTRS1990

Optical control of an 8-element Ka-band phased array using a high-speed optoelectronic interconnect

Optical distribution of control signals in electronically steered phased array antennas is being considered. A demonstration experiment is described in which a high speed hybrid GaAs optoelectronic integrated circuit (OEIC) was used to control an eight element phased array antenna. The OEIC, which accepts a serial optical control signal as input and converts it to 16 demultiplexed parallel outputs, was used to control the monolithic GaAs phase shifters of a Ka-band patch panel array antenna. Antenna pattern switching speeds of 2.25 microsec, limited by interface circuitry, were observed.

Richard, M. A.↗

NASA NTRS1992

A microwave holography methodology for diagnostics and performance improvement for large reflector antennas

This microwave holography technique utilizes the Fourier transform relation between the complex far field radiation pattern of an antenna and the complex aperture field distribution. Resulting aperture phase and amplitude distribution data can be used to precisely characterize various crucial performance parameters, including panel alignment, panel shaping, subreflector position, antenna aperture illumination, directivity at various frequencies, and gravity deformation effects. The methodology of data processing presented here was successfully applied to the Deep Space Network (DSN) 34-m beam waveguide antennas. The antenna performance was improved at all operating frequencies by reducing the main reflector mechanical surface rms error to 0.43 mm. At Ka-band (32 GHz), the estimated improvement is 4.1 dB, resulting in an aperture efficiency of 52 percent. The performance improvement was verified by efficiency measurements and additional holographic measurements.

Rochblatt, D. J.↗

NASA NTRS1992

New coplanar waveguide feed network for 2 x 2 linearly tapered slot antenna subarray

A novel feed method is presently demonstrated for a 2 x 2 linearly tapered slot antenna (LTSA) on the basis of a coplanar-waveguide (CPW)-to-slotline transition and a coax-to-CPW in-phase, four-way power divider. The LTSA subarray exhibits excellent radiation patterns and return-loss characteristics at 18 GHz, and has symmetric beamwidth; its compactness renders it applicable as either a feed for a reflector antenna or as a building-block for large arrays.

Simons, Rainee N.↗

NASA NTRS1992

Microwave antenna holography

Rochblatt, David J.↗

NASA NTRS1992

Mitigation of multipath in DGPS ground reference stations

Multipath represents one of the most serious threats to accuracy in Differential GPS (DGPS). The theoretical foundations of multipath are presented and several multipath mitigation techniques are reviewed. Special emphasis is placed on signal diffraction methods. Reflections enter peaks and nulls in the distorted antenna pattern in a random manner. This, coupled with the oscillations in relative phase (with respect to the direct signal), results in a multipath error signature which is noise-like. Since it is noise-like, it may be significantly reduced by averaging the code phase measurements against the more stable carrier-phase measurements. Exploitation of this effect to reduce multipath error represents a significant increase in accuracy for real time DGPS. Experiments have been performed which verify these conclusions.

Braasch, Michael S.↗

NASA NTRS1996

The Effects of Acoustic Treatment on Pressure Disturbances From a Supersonic Jet in a Circular Duct

The pressure disturbances generated by an instability wave in the shear layer of a supersonic jet are studied for an axisymmetric jet inside a lined circular duct. For the supersonic jet, locally linear stability analysis with duct wall boundary conditions is used to calculate the eigenvalues and the eigenfunctions at each axial location. These values are used to determine the growth rates and phase velocities of the instability waves and the near field pressure disturbance patterns. The study is confined to the dominant Kelvin-Helmholtz instability mode and to the region just downstream of the nozzle exit where the shear layer is growing but is still small in size compared to the radius of the duct. Numerical results are used to study the effects of changes in the outer flow, growth in the shear layer thickness, wall distance, and wall impedance, and the effects of these changes on non-axisymmetric modes. The primary results indicate that the effects of the duct wall on stability characteristics diminish as the outer flow increases and as the jet azimuthal mode number increases. Also, wall reflections are reduced when using a finite impedance boundary condition at the wall; but in addition, reflections are reduced and growth rates diminished by keeping the imaginary part of the impedance negative when using the negative exponential for the harmonic dependence.

Dahl, Milo D.↗

NASA NTRS1996

Vapor Flow Patterns During a Start-Up Transient in Heat Pipes

The vapor flow patterns in heat pipes are examined during the start-up transient phase. The vapor core is modelled as a channel flow using a two dimensional compressible flow model. A nonlinear filtering technique is used as a post process to eliminate the non-physical oscillations of the flow variables. For high-input heat flux, multiple shock reflections are observed in the evaporation region. The reflections cause a reverse flow in the evaporation and circulations in the adiabatic region. Furthermore, each shock reflection causes a significant increase in the local pressure and a large pressure drop along the heat pipe.

Issacci, F.↗

NASA NTRS1999

Microgravity Two-Phase Flow Transition

Two-phase flows under microgravity condition find a large number of important applications in fluid handling and storage, and spacecraft thermal management. Specifically, under microgravity condition heat transfer between heat exchanger surfaces and fluids depend critically on the distribution and interaction between different fluid phases which are often qualitatively different from the gravity-based systems. Heat transfer and flow analysis in two-phase flows under these conditions require a clear understanding of the flow pattern transition and development of appropriate dimensionless scales for its modeling and prediction. The physics of this flow is however very complex and remains poorly understood. This has led to various inadequacies in flow and heat transfer modeling and has made prediction of flow transition difficult in engineering design of efficient thermal and flow systems. In the present study the available published data for flow transition under microgravity condition are considered for mapping. The transition from slug to annular flow and from bubbly to slug flow are mapped using dimensionless variable combination developed in a previous study by the authors. The result indicate that the new maps describe the flow transitions reasonably well over the range of the data available. The transition maps are examined and the results are discussed in relation to the presumed balance of forces and flow dynamics. It is suggested that further evaluation of the proposed flow and transition mapping will require a wider range of microgravity data expected to be made available in future studies.

Parang, M.↗

NASA NTRS2013

Ar-40/Ar-39 Ages for Maskelynites and K-Rich Melt from Olivine-Rich Lithology in (Kanagawa) Zagami

We report Ar/Ar release patterns for small maskelynite grains and samples of a K-rich phase separated from the basaltic shergottite Zagami. The purpose of the work is to investigate the well-known discrepancy between published Ar/Ar ages of Zagami, >200 Ma, and its age of approx. 170 Ma as determined by other methods [1-6]. Niihara et al. [7] divide less abundant darker material present in Zagami into an olivine-rich lithology (ORL), from which most of our samples came, and a pyroxene-rich one (Dark Mottled-Lithology: DML) [8, 9]. ORL consists of vermicular fayalitic olivine, coarse-grained pyroxene, maskelynite, and a glassy phase exceptionally rich in K (up to 8.5 wt%), Al, and Si, but poor in Fe and Mg. The elemental composition suggests a late-stage melt, i.e., residual material that solidified late in a fractional crystallization sequence. Below we refer to it as "K-rich melt." The K-rich melt contains laths of captured olivine, Ca-rich pyroxene, plagioclase, and opaques. It seemed to offer an especially promising target for Ar-40/Ar-39 dating.

Park, J.↗

NASA NTRS2019

Inter-annual variation of tropical cyclones simulated by GEOS-5 AGCM with modified convection scheme

The Goddard Earth Observing System version 5 (GEOS-5) global climate model with a 50-km horizontal resolution is forced by observed sea surface temperature (SST) to examine the fidelity of the seasonal-mean and inter-annual variation of tropical cyclones (TCs) in the western North Pacific (WNP) and the North Atlantic (NATL). The standard Relaxed Arakawa Schubert (RAS) deep convection scheme is modified to improve the representation of TCs, where the scheme implements a stochastic limit of the cumulus entrainment rate. The modification drives mid- and upper-tropospheric cooling and low- to mid-tropospheric drying in the background state, which tends to increase atmospheric instability. This enables the model to increase convective variability on an intra-seasonal timescale and improve the simulation of intense storms. Five-member ensemble runs with the modified RAS scheme for 12 years (1998–2009) exhibit realistic spatial distributions in the climatological-mean TC development area and their pathways over WNP and NATL. The GCM is able to reproduce the inter-annual variation of accumulated cyclone energy (ACE) by prescribing yearly varying observed SST even though the individual TC intensity is still underpredicted. A sensitivity of TC activity to El Niño–Southern Oscillation (ENSO) phase is also reproduced realistically over WNP in terms of the spatial pattern changes in the main development region and TC pathways. However, the model exhibits a notable deficiency in NATL in reproducing the observed inter-annual variation of TC activity and the sensitivity to the ENSO.

accumulated cyclone energy↗