Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Structure, properties, and applications of polyacrylonitrile/carbon nanotube ( CNT ) fibers at low CNT loading

Abstract Bi‐component, polyacrylonitrile (PAN)/carbon nanotube (CNT) fibers were processed, at different core‐sheath area ratios, by gel spinning. A percolated CNT network at 10 wt% CNT in the sheath enhanced electrical conductivity as compared to the neat PAN fiber, while PAN polymer in the core contributed to the good mechanical properties. Fibers with relatively thin sheath allowed overall CNT loading as low as 3.7 wt% to be made with good electrical conductivity, and PAN stabilization by Joule heating was demonstrated. Such fibers with combined good mechanical properties and electrical conductivity can also potentially be used for electrical heating of fabrics, for making smart textiles, and for electromagnetic interference shielding.

Lu, Mingxuan↗

A Physically-Based Model for Thermo-Oxidative and Hydrolytic Aging of Elastomers

A computationally efficient model is proposed to capture the loss of mechanical performance due to chemical aging that are formed as the competition of chain scission and cross-link formation/dissolution, such as thermo-oxidative aging or hydrolytic aging. The model should be considered an extension of our recent models [1, 2, 3] which further simplifies the matrix behavior based on the assumption of independence of environmental and mechanical damage. The model uses this assumption to reduce the necessary material parameters needed to model constitutive and inelastic behavior of elastomers during aging. To this end, the model can provide accurate predictions of the material performance with the significantly fewer number of fitting parameters. The model is relevant for all decay mechanisms formed by the occurrence of two simultaneous micro-mechanisms; (i) formation/reduction of the cross-links, and (ii) chain scission, both of which are present in thermo-oxidation and hydrolytic aging. Assuming the alteration of the chain density along the aging trajectory is identical to the peroxide cross-link density for thermo-oxidation, and the change of the average molecular weight for hydrolysis, the strain energy of polymer matrix can be rewritten as a function of deformation, deformation history, storage time and aging temperature. Next, the modified network alteration model is formulated for implementation into Finite Element (FE) simulations. The model is built on the presumption of homogeneous and consistent oxygen/water absorption and thus is mainly relevant for relatively thin samples exposed to environmental loads for a long time. The proposed model includes only six physically inspired material parameters. Therefore, while it is computationally efficient, it shows good agreement with own experimental data, which performed on various range of accelerated aging temperatures and times. With respect to its computational efficiency, simplicity, accuracy, and interpret-ability, the model is the right choice for advanced implementations in FE programs.

42 ENGINEERING↗

A single-composition CaSi{sub 2}O{sub 2}N{sub 2}:RE (RE=Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+}) phosphor nanofiber mat: Energy transfer, luminescence and tunable color properties

CaSi{sub 2}O{sub 2}N{sub 2}:RE (RE = Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+}) phosphor nanofiber mat has been prepared via the electrospinning process and further annealing treatment. The diameter of nanofiber precursors are generally in a range of 400–600 nm, which exhibits smooth and uniform surface morphology. After removing the polymer template by high temperature treatment, the fabricated mats have been transformed into a phosphor film and maintain uniform nanofiber network microstructures. Photoluminescence (PL) properties of CaSi{sub 2}O{sub 2}N{sub 2} phosphor nanofiber mat have been activated by Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+} and Mn{sup 2+}. The emission color of CaSi{sub 2}O{sub 2}N{sub 2}:Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+} phosphor mats can be adjusted by modifying the concentration of doped Tb{sup 3+}/Mn{sup 2+}/Eu{sup 2+} and the resultant energy transfer process. Owing to the energy transfer of Ce{sup 3+}-Tb{sup 3+}, the emitting color of the phosphor mat can be changed from blue to green. Meanwhile, we still found that the switching of emitting colors from blue to red and blue to yellow can be achieved via the energy transfer of Ce{sup 3+}-Mn{sup 2+} and Ce{sup 3+}-Eu{sup 2+}, respectively. We demonstrated a white light emission phosphor nanofiber mat by using CaSi{sub 2}O{sub 2}N{sub 2} system, which exhibited promising applications for near-UV WLEDs. - Graphical abstract: CIE chromaticity coordinates of CaSi{sub 2}O{sub 2}N{sub 2}:Ce{sup 3+}/Tb{sup 3+}, Eu{sup 2+}, Mn{sup 2+} samples. The lighting optical images with a drive current of 100 mA: three LEDs with nanofiber mats of CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.03Tb{sup 3+}(b), CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.01Eu{sup 2+}(c) and CaSi{sub 2}O{sub 2}N{sub 2}: 0.02Ce{sup 3+}, 0.12Mn{sup 2+}(d). Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron tomography unravels new insights into fiber cell wall nanostructure; exploring 3D macromolecular biopolymeric nano-architecture of spruce fiber secondary walls

Lignocellulose biomass has a tremendous potential as renewable biomaterials for fostering the “bio-based society” and circular bioeconomy paradigm. It requires efficient use and breakdown of fiber cell walls containing mainly cellulose, hemicellulose and lignin biopolymers. Despite their great importance, there is an extensive debate on the true structure of fiber walls and knowledge on the macromolecular nano-organization is limited and remains elusive in 3D. We employed dual-axis electron tomography that allows visualization of previously unseen 3D macromolecular organization/biopolymeric nano-architecture of the secondary S2 layer of Norway spruce fiber wall. Unprecedented 3D nano-structural details with novel insights into cellulose microfibrils (~2 nm diameter), macrofibrils, nano-pore network and cell wall chemistry (volume %) across the S2 were explored and quantified including simulation of structure related permeability. Matrix polymer association with cellulose varied between microfibrils and macrofibrils with lignin directly associated with MFs. Simulated bio-nano-mechanical properties revealed stress distribution within the S2 and showed similar properties between the idealized 3D model and the native S2 (actual tomogram). Present work has great potential for significant advancements in lignocellulose research on nano-scale understanding of cell wall assembly/disassembly processes leading to more efficient industrial processes of functionalization, valorization and target modification technologies.

3-D reconstruction↗

Seawater Desalination Derived Entirely from Ocean Biomass

Solar-driven interfacial evaporation shows great prospects for seawater desalination with its rapid fast evaporation rate and high photothermal conversion efficiency. Here, a sustainable, biodegradable, non-toxic, and highly efficient full ocean biomass-based solar-driven evaporator is reported, which is composed of chitosan (CS) hydrogel as the hydratable skeleton and cuttlefish ink (CI) as the photothermal material. Under solar irradiation, the cuttlefish ink powder harvests solar energy and heats the surrounding water. Simultaneously, the water in the three-dimensional network of chitosan hydrogel is rapidly replenished by the interconnected porous structure and the hydrophilic functional groups attached to the polymer chains. With its enlarged evaporation surface, high solar absorptance, adequate water transportation, good salt drainage, and heat localization, the CI/CS-based evaporator achieves a remarkable evaporation rate of 4.1 kg m-2 h-1 under one sun irradiance (1 kW m-2) with high-quality freshwater yields. This full ocean biomass-based evaporator with abundant raw material availability provides new possibilities for an efficient, stable, sustainable, and environmentally friendly solar evaporator with guaranteed water quality.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

High performance composites research at NASA-Langley

Barriers to the more extensive use of advanced composites in heavily loaded structures on commercial transports are discussed from a materials viewpoint. NASA Langley matrix development activities designed to overcome these barriers are presented. These include the synthesis of processable, tough, durable matrices, the development of resin-property/composite-property relationships which help guide the synthesis program, and the exploitation of new processing technology to effectively combine reinforcement filaments with polymer matrices. Examples of five classes of polymers being investigated as matrix resins at NASA Langley are presented, including amorphous and semicrystalline thermoplastics, lightly crosslinked thermoplastics, semiinterpenetrating networks, and toughened thermosets. Relationships between neat resin modulus, resin fracture energy, interlaminar fracture energy, composite compression strength, and postimpact compression strength are shown. Powder and slurry processing techniques are discussed.

Saint Clair, Terry L.↗

Application of Energy-efficient Electromagnetic Melt-Processing for the Upcycling of Recycled Polyphenylene Sulfide into Multifunctional Segregated Nanocomposites

Polyphenylene sulfide (PPS) is widely used in structural and functional composites because of its thermal stability, chemical resistance, and mechanical strength. As circular manufacturing becomes increasingly important, extending the service life of recycled PPS (rPPS) is essential. However, conventional high-temperature reprocessing accelerates thermo-oxidative degradation, reducing recycled composite performance. This study proposes a rapid and potentially energy-saving upcycling strategy for rPPS using electromagnetic (EM) melt-processing to form segregated carbon nanotube (CNT) networks and produce EM-responsive nanocomposites. The aim was to determine whether CNT-assisted EM heating could reduce polymer degradation while improving multifunctional properties at ultralow filler loadings. rPPS micropellets were coated with CNTs by ball milling to create conductive shells, then compacted into green bodies (GBs) and selectively melted by rapid EM irradiation. Structural, electrical, mechanical, rheological, and electromagnetic interference (EMI) shielding properties were evaluated. Electrical percolation occurred at an ultralow CNT loading of 0.08 wt%, with conductivity reaching (1.24 ± 0.74) × 10 -5 S⋅m -1 at 0.1 wt%. At this concentration, tensile strength and modulus increased by 72% and 99%, respectively. At ~ 0.7 mm thickness, X-band EMI shielding effectiveness reached 6 dB for GBs and 3 dB after EM processing. This shows that EM melt-processing upcycles rPPS into high-performance multifunctional nanocomposites with minimum thermal degradation.

recycled↗

Creation of Self-Semi-Interpenetrating Network Structures in PIM-1 Membranes for Enhanced Physical Aging Resistance

A series of self-semi-interpenetrating network (ssIPN) thin films based on PIM-1 structure were developed by end-cross-linking telechelic PIM-1 oligomers end-capped with curable carboxylic acid groups to form model networks, which are penetrated by linear high-molecular-weight PIM-1 chains. ssIPN films with systematically varied network content ranging from 10 to 30 wt % were comprehensively examined on their microstructure and gas permeation properties. Fresh PIM-1 ssIPN films exhibited gas separation performances close to those of as-cast linear PIM-1, where the films closely followed the upper bound trade-off line, gaining as much selectivity as they lose gas permeability as the network content increases. This indicates that gas permeability is largely preserved despite cross-linking. Wide-angle X-ray scattering supported this observation, with peaks shifting toward lower d-spacing as oligomer content increased, suggesting tighter chain packing with higher cross-linkable oligomer loading. In physical aging studies over two months, all ssIPN films outperform linear PIM-1 for H 2 /CH 4 and O 2 /N 2 separations. Notably, the PIM-1 ssIPN with 10 wt % network content showed the best physical aging resistance, with negligible permeability loss even after one month. Finally, these findings highlight a promising macromolecular strategy for enhancing the physical aging resistance of microporous polymer membranes for gas separation.

PIM-1↗

Dynamic Interfacial Design in Adaptive Hybrid Materials Enables Reversible and Tunable Mechano-Optic Smart Responses

Next-generation polymeric materials are shifting toward adaptive and interactive behaviors of living systems; however, designing materials that can reversibly modulate optical properties under mechanical deformation while maintaining mechanical robustness remains a key challenge. Here, we report a mechanically robust vitrimer-based adaptive hybrid material (AHM) that exhibits a stretch-induced reversible transparency-to-opacity transition, enabled by the integration of dynamic interactions at the polymer–silica nanoparticle interface and controlled nanoparticle self-assembly. The AHM combines boronic ester–functionalized polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (S-Bpin) with diol-functionalized silica nanoparticles (diol-SiNPs) to form a hybrid network hosting both dynamic boronic ester and hydrogen-bonding interactions. These reversible linkages facilitate controlled nanoparticle self-assembly and enable strain-induced nanoparticle alignment/aggregation. Upon stretching, SiNP-rich domains align and aggregate within the polymer matrix, while local modulus mismatch between stiff aggregated SiNP/borylated-styrene-rich regions and the softer elastomeric midblock induces surface microwrinkle formation. These internal aggregates and surface wrinkles cooperatively enhance light scattering, producing the opaque state under strain. Furthermore, the tailored AHM exhibits high toughness, thermomechanical stability, reprocessability, and programmable shape-memory behavior. This work presents a dynamic interfacial design strategy for mechanically robust, optically reconfigurable, and reusable soft materials for adaptive optics, smart windows, sensing, soft robotics, and circular smart-material platforms.

adaptive hybrid materials↗

Quantum Simulations of Radiation Damage in a Molecular Polyethylene Analog

Abstract An atomic‐level understanding of radiation‐induced damage in simple polymers like polyethylene is essential for determining how these chemical changes can alter the physical and mechanical properties of important technological materials such as plastics. Ensembles of quantum simulations of radiation damage in a polyethylene analog are performed using the Density Functional Tight Binding method to help bind its radiolysis and subsequent degradation as a function of radiation dose. Chemical degradation products are categorized with a graph theory approach, and occurrence rates of unsaturated carbon bond formation, crosslinking, cycle formation, chain scission reactions, and out‐gassing products are computed. Statistical correlations between product pairs show significant correlations between chain scission reactions, unsaturated carbon bond formation, and out‐gassing products, though these correlations decrease with increasing atom recoil energy. The results present relatively simple chemical descriptors as possible indications of network rearrangements in the middle range of excitation energies. Ultimately, the work provides a computational framework for determining the coupling between nonequilibrium chemistry in polymers and potential changes to macro‐scale properties that can aid in the interpretation of future radiation damage experiments on plastic materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Self-assembly of co-continuous nanostructured copolymer templates with compositional and architectural dispersity

In our previous DOE-supported project (DE-SC0016208), we demonstrated that a particular architecture dubbed ‘randomly end-linked copolymer networks’ (RECNs) led to especially robust self-assembly of disordered cocontinuous nanostructures. Such structures, wherein both microphases are fully percolating in three dimensions, are attractive for a wide-variety of energy-relevant applications including purification membranes, separators in batteries and fuel cells, catalyst supports, and high surface area electrodes. In the current project we sought to substantially extend our fundamental understanding of how different types of randomness in blocky copolymer architecture contribute to the robust formation of disordered cocontinuous nanostructures. To do so, we filled in the sizable gap between the previously studied cases of randomly linked linear multiblock copolymers and RECNs by studying two intermediate cases: (i) random miktoarm star polymers, which contain dispersity in the number of the two chemically-incompatible strands located at each junction and therefore the preferred interfacial curvature of each polymer, and (ii) randomly branched copolymers, which also possess bridging strands that stretch across domains and apply local ‘elastic’ forces to the interfaces. In addition, we studied a different network architecture, statistically crosslinked copolymer networks, that is more straightforward to prepare using chain growth polymerization methods, enabling more facile formation of cocontinuous nanostructures. Finally, we extended our approaches from model systems based on polystyrene and poly(lactic acid) to copolymer architectures containing either (i) polysulfone, an engineering polymer that provides excellent mechanical properties for membrane applications, or (ii) polyacrylonitrile, providing a convenient route to nanoporous carbon materials.

36 MATERIALS SCIENCE↗

Sono-Assisted Surface Energy Driven Assembly of 2D Materials on Flexible Polymer Substrates: A Green Assembly Method Using Water

The challenges in achieving a green and scalable integration of two-dimensional (2D) materials with flexible polymer substrates present a major barrier for the application of 2D materials, such as graphene, MoS2, and h-BN for flexible devices. Here, we create a sono-assisted surface energy driven assembly (SASEDA) method that can achieve foot-scale to micrometer-scale assembly of 2D materials, form a conductive network in as short as 10 s, and build hierarchical and hybrid flexible devices such as sensors, resistors, and capacitors by using water as the dispersion solvent. SASEDA highlights two counterintuitive innovations. First, we use an 'unfavorable' solvent (i.e., water) for both 2D materials (e.g., graphene, MoS2, and h-BN) and polymer substrates (e.g., polydimethylsiloxane) to drive the assembly process. Second, we use a weak sono-field (0.3 W/cm2) generated by a regular sonication bath cleaner to enhance the assembly efficiency and reorganize and unify the assembly network. This method and its principle pave the way toward affordable large-scale 2D material-based flexible devices.

2D material↗

Characterization and Modeling of Segmental Dynamics in Silicone Based Nanocomposites

The addition of nano-particles with novel chemical, optical, or barrier properties further opens the door to the development of so-called multifunctional materials (1). Key to developing robust, tailored composites is a detailed understanding of the structural contributions to the engineering properties of the composite and how they may change with time in harsh service conditions. The segmental dynamics and local order underlie much of the fundamental physics that influence the performance of elastomers and can serve as important diagnostics for reinforcement and other fundamental properties (e.g., network topology, cross-link density, the number and distance between chemical and physical (entanglements) cross-links, the type and volume fraction of filler) and thus provide a route to this fundamental understanding. {sup 1}H MQ-NMR spectroscopy has shown the ability to provide more reliable and quantitative information regarding the elastomer network structure and heterogeneities (2). {sup 1}H MQ-NMR methods allow for the measurement of absolute residual dipolar couplings (<{Omega}{sub d}>) and thus the segmental/cooperative dynamics Thus, the MQ-NMR method allows for the direct measure of network topology and in many cases, filler-particle interactions. The ability of MD methods to uncover structural motifs and dynamics at the atomistic scale is well known. In polymer systems, however, the relationship to bulk material properties can be somewhat tenuous due to often limited number of atoms and short time durations that can be studied. Extending these MD simulations to large assemblies of atoms and extending them to longer times using state of the art computational resources has allowed us to probe some useful relationships. MD provides static and dynamic properties for a collection of particles that allow atomic scale insights that are difficult to gain otherwise. We have been exploiting these methods to characterize the effects of network structure and filler content on a number of silicone based nanocomposite systems. This data is providing improved insight into the structural contributions to the changes in segmental dynamics. Here we provide an overview of our ongoing work toward understanding the influence of the network structure on the physical and chemical properties of advanced composite elastomers, including material performance in severe environments (high temperature, high strains, high radiation fluxes).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonmonotonic Strain Rate Dependence on the Strain Hardening of Polymer Nanocomposites

This Letter investigates the external deformation on modifying the polymer–nanoparticle (NP) and NP–NP interactions as well as their influences on the macroscopic properties of polymer nanocomposites (PNCs). Specifically, the applied uniaxial extension brings together the NPs along the transverse stretching direction and catalyzes the percolation transition from the initially well-dispersed NPs in the PNCs. The percolated NP network thus increases the strength of PNCs and leads to a strong surge in the elongation viscosity at very low strain rates, exhibiting the unexpected nonmonotonic strain rate dependence on the strain hardening. These results reveal explicitly the unconventional roles of the external deformation on modulating the relative strength of the polymer–NP and the NP–NP interactions, enabling advanced structures and properties control of PNCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-dependent polymorphism and magnetic properties of three-dimensional copper pyromellitate coordination polymers containing 4,4′-dipyridylamine

A pair of three-dimensional divalent copper pyromellitate (1,2,4,5-benzene-tetracarboxylate, pyro) coordination polymers containing 4,4′-dipyridylamine (dpa) was hydrothermally prepared and structurally characterized by single-crystal X-ray diffraction. The higher-temperature phase ([H{sub 2}dpa][Cu{sub 3}(pyro){sub 2}(H{sub 2}O){sub 3}]·2.5H{sub 2}O){sub n} (1) displays an acentric 3-D 4,4,6-connected anionic network with (4{sup 4}5.6)(5{sup 4}8{sup 2})(4{sup 4}5{sup 4}6{sup 3}7{sup 4}) topology, featuring (Cu{sub 2}(OCO){sub 4}) paddlewheel dimers and isolated copper ions. Charge-balancing H{sub 2}dpa cations are embedded in incipient voids. Prepared at lower temperature, ([Cu{sub 3}(pyro){sub 2}(dpa){sub 2}(dpaH){sub 2}]·3H{sub 2}O){sub n} (2) manifests a 3-D 4,4,4-connected neutral network with uncommon (4{sup 2}6{sup 4}){sub 4}(6{sup 4}8{sup 2}) frl topology based on (Cu{sub 3}(OCO){sub 2}) linear trimers. Antiferromagnetic coupling (J=–82(5) cm{sup –1}) was observed within the (Cu{sub 2}(OCO){sub 4}) dimeric units in 1, while weak ferromagnetic coupling (J=1.0(4) cm{sup –1}) was evident for the (Cu{sub 3}(OCO){sub 2}) linear trimers in 2. Thermal degradation behavior of these new materials is also presented. - Graphical abstract: Two copper pyromellitate coordination polymers containing 4,4′-dipyridylamine were prepared. The higher-temperature phase ([H{sub 2}dpa][Cu{sub 3}(pyro){sub 2}(H{sub 2}O){sub 3}]∙2.5H{sub 2}O){sub n} displays an acentric 3-D trinodal anionic network with (4{sup 4}5.6)(5{sup 4}8{sup 2})(4{sup 4}5{sup 4}6{sup 3}7{sup 4}) topology, featuring antiferromagnetically coupled (Cu{sub 2}(OCO){sub 4}) paddlewheel dimers and isolated copper ions. - Highlights: • Copper pyromellitate (pyro) coordination polymers with 4,4′-dipyridylamine (dpa). • Higher-temperature phase 1 has 3-D anionic trinodal network with H{sub 2}dpa cations. • Lower-temperature phase 2 has rare 3-D frl network. • Dimers and chains in 1 show antiferromagnetism, trimers in 2 show ferromagnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗