Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPORIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47

Convective Influence on the Lower Stratospheric Water Vapor in the Boreal Summer Asian Monsoon Region

Processes maintaining the localized maxima in lower stratospheric watervapor over the boreal summer Asian monsoon region are investigated usingtrajectory and cloud models that resolve the detailed cloudmicrophysical processes, with observation-based convection and radiationschemes. We examine the impact of convective influence along parceltrajectories on cloud formation and dehydration by tracing thetrajectories through time-dependent fields of convective cloud topheights estimated from global rainfall and geostationary brightnesstemperatures. Parameters such as the rainfall threshold used foridentification of deep convection are derived by comparison with theCloudSat deep convective cloud top product as enhanced by colocatedCALIOP measurements. The simulated water vapor field at the 100 hPalevel and cloud occurrence frequencies in the tropical tropopause layer(TTL) are constrained by corresponding observations from MLS andCALIPSO, respectively. The observed maximum in the 100 hPa level watervapor field over the Asian monsoon region is only present in thesimulation with convective influence, indicating the importance ofconvective hydration for the summertime water vapor distribution.Convection moistens the 100 hPa level over the Asian monsoon by 1 ppmv,where 75 of this moistening is due to convection occurring locallywithin the monsoon region. Convection also increases the cloudoccurrence frequency in the TTL over the southern sector of the Asianmonsoon anticyclone by 20. Parcels are convectively hydrated in thesoutheastern sector of the anticyclone, transported westward by theanticyclonic circulation, and dehydrated in the southwestern sector. Therelative importance of extreme convective events that inject ice andwater vapor near or above the tropopause will also be examined.

convection↗

Dropsonde Observations of Total Integrated Water Vapor Transport within North Pacific Atmospheric Rivers

A0.0ircraft dropsonde observations provide the most comprehensive measurements to date of horizontal water vapor transport in atmospheric rivers (AR). The CalWater experimen0 t 0.0recently more than tripled the number of ARs probed with the required measurements. This study uses vertical profiles of water vapor, wind, and pressure obtained from 304 dropsondes across 21 ARs. On average, total water vapor transport (TIVT) in an AR was 4.7108 2108 kg s-1. This magnitude is 2.6 times larger than the average discharge of liquid water from the Amazon River. The mean AR width was 890 270 km. Subtropical ARs contained larger IWV but weaker winds than midlatitude ARs, although average TIVTs were nearly the same. Mean TIVTs calculated by defining the lateral edges of ARs using an IVT-threshold versus an IWV-threshold produced results that differed by less than 10 across all cases, but did vary between midlatitudes and subtropical regions.

water vapor↗

Vapor Cooling of a Structural Skirt for a Large-Scale Hydrogen Tank

The demonstration of vapor cooling on a structural skirt was one of the main objectives of the Structural Heat Intercept, Insulation, and Vibration Evaluation Rig (SHIIVER) testing. SHIIVER consisted of a 4-meter diameter stainless steel tank with an aluminum forward skirt. The forward skirt was cooled by directing effluent vapor from the tank through two flow channels that each went 360 degrees around the interior of the skirt in a helical pattern. Flow rates, temperatures, and pressures in the system were measured allowing for the calculation of heat load removed via cooling stream and heat load reduction into the tank. Testing occurred at fill levels between 25% and 90% full using both liquid hydrogen and liquid nitrogen. Boil-off rate was varied independent of the skirt performance by adding multilayer insulation over the spray-on-foam insulation on the tank domes, while leaving the barrel insulated only with spray-on-foam. The results from the testing, which demonstrate vapor cooling reversed heat flow from the skirt into the tank and reduces total propellant heat load by as much as 19%, are analyzed and discussed.

Cryogenic Fluid Management↗

Microgravity Flow Boiling Experiments With Liquid-Vapor Mixture Inlet Onboard the International Space Station

This article is part of a series of studies culminating from the multi-objective Flow Boiling and Condensation Experiment (FBCE) onboard the International Space Station, which utilized the Flow Boiling Module (FBM) for experiments between February and July 2022. This study investigates microgravity flow boiling of n-Perfluorohexane with liquid-vapor mixture (two-phase) inlet conditions to the FBM with either one or two opposite walls heated. The FBM’s channel has a rectangular cross-sectional area of 5.0 × 2.5 mm 2 and a heated length of 114.6 mm. Key parameters of interest include mass velocity (180 – 2400 kg/m 2 s), inlet quality (-0.01 – 0.87), inlet pressure (120 – 200 kPa), and heat flux (1.8 W/cm 2 to critical heat flux), and a large database is amassed. The flow is visualized via a high-speed video camera and photographs are recorded at each heating increment to assess the periodic flow patterns within the channel and the near-wall interfacial behavior. Flow patterns are complex and mainly characterized by high- and low-density fronts alternately traversing the channel to yield high- and low-density-dominant periods of boiling. At all operating conditions, high-density fronts are faster during high-density-dominant periods. At low inlet qualities, the flow is annular near the channel inlet with a central vapor core surrounded by an annular liquid layer. Each high-density front having a high liquid fraction leaves a thin liquid layer sheared onto the heated walls. Boiling occurs within the liquid layer and a vapor layer is formed next to the heated wall. Inlet quality and mass velocity most dictate the overall flow patterns followed by heating configuration, and to a much lesser extent, heat flux and inlet pressure. Heat transfer characteristics are assessed via averaged boiling curves, streamwise profiles of wall temperature and heat transfer coefficient, and parametric curves of local and averaged heat transfer coefficients. Inlet pressure has an insignificant effect on heat transfer. At similar operating conditions, both the heating configurations yield similar trends and values of heat transfer coefficient and critical heat flux (CHF, slightly higher for single-sided) even though double-sided heating adds twice the heat to the fluid and doubly raises local quality. The heat fluxes required for both onset of nucleate boiling degradation and CHF are larger at high mass velocities and low inlet qualities. For a fixed inlet quality, high mass velocities yield higher average heat transfer coefficients at both lower and higher heat fluxes, while the nucleate boiling regime at intermediate heat fluxes is unaffected. For a fixed mass velocity, higher inlet qualities yield higher and lower average heat transfer coefficients at lower and higher heat fluxes, respectively.

Microgravity↗

Smoothing HCCI heat release with vaporization-cooling-induced thermal stratification using ethanol.

Ethanol and ethanol/gasoline blends are being widely considered as alternative fuels for light-duty automotive applications. At the same time, HCCI combustion has the potential to provide high efficiency and ultra-low exhaust emissions. However, the application of HCCI is typically limited to low and moderate loads because of unacceptably high heat-release rates (HRR) at higher fueling rates. This work investigates the potential of lowering the HCCI HRR at high loads by using partial fuel stratification to increase the in-cylinder thermal stratification. This strategy is based on ethanol's high heat of vaporization combined with its true single-stage ignition characteristics. Using partial fuel stratification, the strong fuel-vaporization cooling produces thermal stratification due to variations in the amount of fuel vaporization in different parts of the combustion chamber. The low sensitivity of the autoignition reactions to variations of the local fuel concentration allows the temperature variations to govern the combustion event. This results in a sequential autoignition event from leaner and hotter zones to richer and colder zones, lowering the overall combustion rate compared to operation with a uniform fuel/air mixture. The amount of partial fuel stratification was varied by adjusting the fraction of fuel injected late to produce stratification, and also by changing the timing of the late injection. The experiments show that a combination of 60-70% premixed charge and injection of 30-40 % of the fuel at 80{sup o}CA before TDC is effective for smoothing the HRR. With CA50 held fixed, this increases the burn duration by 55% and reduces the maximum pressure-rise rate by 40%. Combustion stability remains high but engine-out NO{sub x} has to be monitored carefully. For operation with strong reduction of the peak HRR, ISNO{sub x} rises to around 0.20 g/kWh for an IMEP{sub g} of 440 kPa. The single-cylinder HCCI research engine was operated naturally aspirated without EGR at 1200 rpm, and had low residual level using a CR = 14 piston.

09 BIOMASS FUELS↗

Pyrolysis Vapor and Bio-Oil Preconditioning via Ex Situ Hydrodeoxygenation and Alkylation Using a Heteropolyacid Catalyst

Ex situ catalytic preconditioning of biomass pyrolysis vapors (partial deoxygenation) has the potential for both reducing the oxygen content and beneficially influencing the oxygen speciation of condense bio-oils for enhancement of downstream condensed phase upgrading processes. Here, condensed phase upgrading processes may refer to both coprocessing and hydroprocessing with vacuum gas-oil (VGO). Reduction of oxygen content to produce bio-oils with greater hydrophobicity can enhance VGO-solubility while tailoring of oxygen speciation by removal of reactive carbonyls (e.g., acetic acid) can lessen catalytic deactivation via coking reactions. 1,2 Furthermore, enhanced VGO-solubility and reduced coking leads to greater biogenic carbon incorporation in end-products from condensed phase upgrading processes. By leveraging the hydrodeoxygenation and alkylation activity of a titania-supported molybdenum-heteropolyacid (Mo-HPA/TiO2) catalyst, pyrolysis vapors and resulting condensed bio-oils were effectively preconditioned for downstream upgrading. 3 Data regarding the use of Mo-HPA/TiO2 for pyrolysis vapor preconditioning will be presented on, including method of employment, catalyst characterization, and impacts on bio-oil in relation to downstream condensed phase upgrading processes. Our approach is to: Compare Mo-HPA/TiO2 product distribution to HZSM-5; Investigate Mo-HPA/TiO2 regeneration and characterize changes in acid site character; Assess product differences in terms of enhanced VGO-solubility.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Sr and Co Vapor-Phase Transport from LSCF Cathodes

A series of tests were performed to differentiate between surface diffusion and vapor-phase diffusion of chemical species from LSCF cathode material at typical sintering temperatures (up to 1100°C) in SOFC production. A GDC source substrate was printed with LSCF and separated by an air gap from a YSZ target substrate. Various geometries with long surface paths were employed to reduce the possibility of surface transport. Sr and Co were detected on the target substrates via energy dispersive spectroscopy (EDS) and x-ray photoelectron spectroscopy (XPS), including spatially resolved XPS. These results support a vapor-phase transport mechanism for Sr and Co. Sintering conditions and barrier layer requirements may need to be revisited to prevent the formation of undesired strontium zirconate at cathode/electrolyte interface due to vapor-phase transport.

vapor phase transport, SOFC cathode, Sr transport↗

Experiments and Simulation of a Borehole in Salt to Understand Heat, Brine, and Vapor Migration - 19192

Disposition of heat-generating nuclear waste (HGNW) remains a continuing technical and sociopolitical challenge. Numerous concepts for HGNW management have been proposed and examined internationally, including an extensive focus on geologic disposal. One proposed geologic material is salt because of its low permeability and viscoplastic deformation that causes self-repair of damage done to the salt by waste emplacement activities. Evaluating the safety and technical challenges of storing HGNW in a salt repository is an ongoing process involving experiments and supporting numerical simulation. Currently an experiment is underway at the Waste Isolation Pilot Plant (WIPP) to explore how the presence of a heat generating source affects phenomena such as brine migration, vapor transport, and mechanical changes to the bedded salt. A sub-horizontal heated borehole test is in progress in the underground at the WIPP that includes a centrally located 10.2 cm diameter borehole with an adjustable heater surrounded with smaller diameter boreholes instrumented with thermocouples. The central borehole contains an inflatable packer, heating block, brine sampler, and constantly flowing nitrogen gas circulation system. Air-injection tests performed in the central borehole provide pressure measurements that are used to constrain permeability of the system. The steady-state temperatures, as well as the rise and fall of temperature when the heater is cycled on and off, have been measured for up to 60 days. In the borehole, dry nitrogen gas circulation evaporates water and outflows to a desiccant container where water mass is measured daily during the experiment to quantify vapor removal. Although this test is a 'shake-down' for a planned second round of fresh borehole testing, we have gathered a rich dataset. These data allow us to build simulations using the Finite Element Heat and Mass transfer code (FEHM) to evaluate the experimental results, determine field-scale parameters, and identify code improvements to reproduce important physical processes that may not be accounted for at present. A 3-D numerical mesh, built using LaGrit software (lagrit.lanl.gov; Miller et al., 2007), includes increasing resolution around the central borehole. Modeling of the experiment allows for determining the local thermal conductivity and permeability of any damaged bedded salt around the borehole, where damage from drilling may change the permeability, porosity and saturation conditions, by parameter testing and inverse methods. Additionally, assumptions about brine and vapor flow and transport are being tested by comparing measured and simulated results. The combination of experimental data and model results provide additional data to help support the safety case for safe and effective HGNW disposition in bedded salt formations. Initial results from this experiment show that water flow into the borehole is within previous experimental results. Further, we have found that the design of the heater block is restricting energy to flow into the rock salt. Thus, this test has proven useful in design of the next generation experiment where infrared heating may be used to bypass issues caused by air gaps located around the current stainless steel block heater. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Gas diffusion ultrabarriers on polymer substrates using Al{sub 2}O{sub 3} atomic layer deposition and SiN plasma-enhanced chemical vapor deposition

Thin films grown by Al{sub 2}O{sub 3} atomic layer deposition (ALD) and SiN plasma-enhanced chemical vapor deposition (PECVD) have been tested as gas diffusion barriers either individually or as bilayers on polymer substrates. Single films of Al{sub 2}O{sub 3} ALD with thicknesses of >=10 nm had a water vapor transmission rate (WVTR) of <=5x10{sup -5} g/m{sup 2} day at 38 deg. C/85% relative humidity (RH), as measured by the Ca test. This WVTR value was limited by H{sub 2}O permeability through the epoxy seal, as determined by the Ca test for the glass lid control. In comparison, SiN PECVD films with a thickness of 100 nm had a WVTR of approx7x10{sup -3} g/m{sup 2} day at 38 deg. C/85% RH. Significant improvements resulted when the SiN PECVD film was coated with an Al{sub 2}O{sub 3} ALD film. An Al{sub 2}O{sub 3} ALD film with a thickness of only 5 nm on a SiN PECVD film with a thickness of 100 nm reduced the WVTR from approx7x10{sup -3} to <=5x10{sup -5} g/m{sup 2} day at 38 deg. C/85% RH. The reduction in the permeability for Al{sub 2}O{sub 3} ALD on the SiN PECVD films was attributed to either Al{sub 2}O{sub 3} ALD sealing defects in the SiN PECVD film or improved nucleation of Al{sub 2}O{sub 3} ALD on SiN.

36 MATERIALS SCIENCE↗

Observation of low heat capacities for vapor-deposited glasses of indomethacin as determined by AC nanocalorimetry

Highly stable glass films of indomethacin (IMC) with thicknesses ranging from 75 to 2900 nm were prepared by physical vapor deposition. Alternating current (AC) nanocalorimetry was used to evaluate the heat capacity and kinetic stability of the glasses as a function of thickness. Glasses deposited at a substrate temperature of 0.84T{sub g} displayed heat capacities that were approximately 19 J/(mol K) (4.5%) lower than glasses deposited at T{sub g} (315 K) or the ordinary glass prepared by cooling the liquid. This difference in heat capacity was observed over the entire thickness range and is significantly larger than the {approx}2 J/(mol K) (0.3%) difference previously observed between aged and ordinary glasses. The vapor-deposited glasses were isothermally transformed into the supercooled liquid above T{sub g}. Glasses with low heat capacities exhibited high kinetic stability. The transformation time increased by an order of magnitude as the film thickness increased from 75 to 600 nm and was independent of film thickness for the thickest films. We interpret these results to indicate that the transformation of stable glass into supercooled liquid can occur by either a surface-initiated or bulk mechanism. In these experiments, the structural relaxation time of the IMC supercooled liquid was observed to be nearly independent of sample thickness.

36 MATERIALS SCIENCE↗

Nanodiamond‐Palladium Core–Shell Organohybrid Synthesis: A Mild Vapor‐Phase Procedure Enabling Nanolayering Metal onto Functionalized sp 3 ‐Carbon

Abstract A novel approach for the bottom‐up construction of hybrid organic–inorganic nanocomposites with an intimate arrangement between sp 3 ‐carbon 3D molecular‐size nanodiamonds (diamondoids) and a coated palladium surface as nanolayer is reported. The construction process is conducted stepwisely from the gas phase, using first controlled vapor‐phase self‐assembly of tailor‐made functionalized diamantane derivatives, followed by low‐temperature (45 °C) chemical vapor deposition of an organometallic complex in a reducing H 2 atmosphere over the self‐assembled diamondoid scaffold. The use of self‐assemblies of primary diamantane phosphine and phosphine oxide, which are produced with high structural uniformity and reproducibility, yields new hybrid diamondoid‐palladium materials incorporating PdOPHdiamantane bonding motifs. Additional investigations provide evidence for a very challenging issue in the intimate construction of sp 3 ‐C/metal scaffolds. Scanning electron microscopy and transmission electron microscopy microscopies combined with X‐ray photoelectron spectroscopy surface analysis and EDX bulk analysis confirm the formation of diamondoid‐palladium organohybrids with unique surface layering. The vapor phase‐controlled mild synthetic process allows excellent control over nanocomposite formation and morphology from molecular‐level modifications. As such, this bottom‐up composite building process bridges scales from the molecular (functionalized diamondoids) over nanoscopic (self‐assemblies) to microscopic regime (hybrids), in the challenging association of transition metals with an electronically saturated sp 3 ‐carbon organic host material.

Gunawan, Maria A.↗

Localized Heterogeneous Nucleation for Vapor‐Assisted Sequential Deposition of Metal Halide Perovskites

Vapor-assisted hybrid two-step deposition, which combines thermally evaporated inorganic layers with solution-processed organic halides to form halide perovskites, has emerged as a scalable and industry-compatible route for textured tandem photovoltaics. However, this process is often hindered by reaction-limited phase formation, particularly when compact, non-porous, and highly crystalline inorganic layers formed by thermal evaporation restrict subsequent conversion, resulting in incomplete reaction and pronounced depth-dependent heterogeneity. In this study, we introduce a strategy to regulate the inorganic precursor layer by incorporating localized heterogeneous nucleation sites. Sparsely distributed hydrophilic metal oxide species serve as effective nucleation centers during vapor deposition, enabling effective control over film morphology and crystal orientation from the early stages of growth. This tailored inorganic framework facilitates the subsequent incorporation of organic halides, alleviating reaction limitations and suppressing residual unreacted precursors. Consequently, the perovskite films exhibit improved stoichiometric uniformity and enhanced optoelectronic quality, enabling wide-bandgap perovskite solar cells with markedly improved performance and operational stability. This work provides important mechanistic insight into crystal growth engineering of vapor-deposited perovskite thin films.

nucleation↗

Changes in water vapor adsorption and water film thickness in clayey materials as a function of relative humidity

Abstract Soil water, with adsorbed water being an important component, plays an important role in fluid flow and chemical movement in the unsaturated zone. The adsorbed water consists of water film and interlayer water, and its content is related to the relative humidity (RH). This study theoretically and experimentally focuses on the variation in adsorbed water content in clayey materials as the RH changes. Based on a slit‐pore model, three types of water (water film, interlayer water, and capillary water) could be present in the water vapor adsorption process. The variation of water film is obtained from the analysis of interfacial forces, and then the total water content can be quantitatively subdivided into these three types of water for different RH values. The slit‐pore adsorption model was used with experimental measurements (water vapor adsorption and N 2 physisorption) to quantify the amounts and interrelationships of these three different types of water to six clayey materials, namely three clay minerals (kaolinite, montmorillonite, and illite–smectite mixed layer) and three clay‐rich sediments from the Jianghan Plain in China. The main results are that (a) the volumes of water vapor adsorption are much greater than those of N 2 adsorption except for kaolinite; (b) interlayer water largely dominates the growth of total water content in montmorillonite and results in a concentration of 0.090 ml g −1 at 95% RH; and (c) the minimum thickness of water film is calculated to be 0.23 nm, and the maximum value is one‐third of the pore width by considering the interfacial forces.

54 ENVIRONMENTAL SCIENCES↗

Repetitive diacetyl vapor exposure promotes ubiquitin proteasome stress and precedes bronchiolitis obliterans pathology

Bronchiolitis obliterans (BO) is a devastating lung disease seen commonly after lung transplant but also seen following severe respiratory tract infection or chemical inhalation exposure. Diacetyl (DA; 2,3-butanedione), highly reactive alpha-diketone is known to cause BO when inhaled, however, the mechanisms of how inhalation exposure leads to BO development remains poorly understood. In the current work, we combined two clinically relevant models for studying the pathogenesis of DA-induced BO: (1) an in vivo rat model of repetitive DA vapor exposures with recovery and (2) an in vitro model of primary human airway epithelial cells exposed to pure DA vapors. Rats exposed to 5 consecutive days 200 parts-per-million DA 6 hrs per day had worsening survival, persistent hypoxemia, poor weight gain, and histologic evidence of BO 14 days after DA exposure cessation. At the end of exposure, increased expression of the ubiquitin stress protein, ubiquitin-C, accumulated within DA-exposed rat lung homogenates, localized primarily to the airway epithelium, the primary site of BO development, and did not occur in air-exposed controls. Lung proteasome activity increased concurrently after DA exposure. In primary human airway cultures, global proteomics analysis identified 519 significantly modified proteins in DA-exposed samples relative to controls with the ubiquitin proteasome system, endosomal reticulum transport, and the response to unfolded protein pathways being upregulated while cell-cell adhesion and oxidation-reduction pathways being downregulated in DA-exposed samples. Altogether, repetitive DA vapor exposure resulted in abundant protein damage, accumulation of polyubiquinated proteins, and ubiquitin proteasome stress prior to the development of chemical-induced BO pathology.

59 BASIC BIOLOGICAL SCIENCES↗

In situ separation of root hydraulic redistribution of soil water from liquid and vapor transport

Nocturnal increases in water potential ( ) and water content (WC) in the upper soil profile are often attributed to root water efflux into the soil, a process termed hydraulic lift or hydraulic redistribution (HR). We have previously reported HR values up to ~0.29 mm day-1 in the upper soil for a seasonally dry old-growth ponderosa pine site. However, unsaturated liquid or vapor flux of water between soil layers independent of roots also contributes to the diurnal patterns in WC, confounding efforts to determine the actual magnitude of HR. In this study, we estimated liquid (Jl) and vapor (Jv) soil water fluxes and their impacts on quantifying HR in situ by applying existing data sets of , WC, temperature (T) and soil physical properties to soil water transport equations. Under moist conditions, Jl between layers was estimated to be larger than necessary to account for measured nocturnal increases in WC of upper soil layers. However, as soil drying progressed unsaturated hydraulic conductivity declined rapidly such that Jl was irrelevant (< 2E-06 cm hr-1 at 0-60 cm depths) to total water flux by early August. In surface soil at depths above 15 cm, large T fluctuations can impact Jv leading to uncertainty concerning the role, if any, of HR in nocturnal WC dynamics. Vapor flux was estimated to be the highest at the shallowest depths measured (20 - 30 cm) where it could contribute up to 40% of hourly increases in nocturnal soil moisture depending on thermal conditions. While both HR and net soil water flux between adjacent layers contribute to WC in the 15-65 cm soil layer, HR was the dominant process and accounted for at least 80% of the diurnal increases in WC. While the absolute magnitude of HR is not easily quantified, total diurnal fluctuations in upper soil water content can be quantified and modeled, and remain highly applicable for establishing the magnitude and temporal dynamics of total ecosystem water flux.

54 ENVIRONMENTAL SCIENCES↗

Effect of Oxidizing Impurities on the Corrosion Behavior of Structural Alloys Exposed to MgCl 2 Molten Salt Vapor

The corrosion behavior of structural alloys SS304 and IN617 when exposed to vapors of MgCl 2 molten salt at 764 °C for 100 h in an argon atmosphere was investigated as a function of the level of oxidizing impurities (e.g., NaOH) present in the salt. Increasing the concentration of oxidizing impurities in the salt caused an increase in corrosion in both structural alloys, as measured by Cr depletion layers. A poorly adhered oxide scale layer containing Mg, Al, and Cr was observed on the surface of the metals, and local attack was observed as well. The Ni-based IN617 showed lower Cr depletion and less scale formation than the Fe-based SS304. These results demonstrate that oxidizing impurities in the molten salt will impact the vapor phase corrosion for structural members exposed to the molten salt headspace. This finding is highly relevant for understanding the effects of the vapor phase in molten salt applications, including molten salt thermal energy storage, molten salt nuclear reactors, and molten salt electrochemistry.

25 ENERGY STORAGE↗

Synthesis of TiO{sub 2} Nanoparticles from Ilmenite Through the Mechanism of Vapor-Phase Reaction Process by Thermal Plasma Technology

Synthesis of nanoparticles of TiO{sub 2} was carried out by non-transferred arc thermal plasma reactor using ilmenite as the precursor material. The powder ilmenite was vaporized at high temperature in plasma flame and converted to a gaseous state of ions in the metastable phase. On cooling, chamber condensation process takes place on recombination of ions for the formation of nanoparticles. The top-to-bottom approach induces the disintegration of complex ilmenite phases into simpler compounds of iron oxide and titanium dioxide phases. The vapor-phase reaction mechanism was carried out in thermal plasma zone for the synthesis of nanoparticles from ilmenite compound in a plasma reactor. The easy separation of iron particles from TiO{sub 2} was taken place in the plasma chamber with deposition of light TiO{sub 2} particles at the top of the cooling chamber and iron particles at the bottom. The dissociation and combination process of mechanism and synthesis are studied briefly in this article. The product TiO{sub 2} nanoparticle shows the purity with a major phase of rutile content. TiO{sub 2} nanoparticles produced in vapor-phase reaction process shows more photo-induced capacity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗