Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conceivably”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Ecological considerations for possible Martian biota

Current climatic and geological evidence suggests that, like early Earth, conditions on ancient Mars may also have been favorable for the origin and evolution of life. The primordial atmospheres of the two planets were quite similar, composed primarily of CO2, N2, and water vapor at a total atmospheric pressure of approximately 1 bar. Each of these gases are important for the evolution of biological systems. With the exception of nitrogen, there seems to have been a sufficient supply of the biogenic elements C, H, O, P, and S (CHOPS) on early Mars for life to have evolved. It was postulated that primordial Mars contained only 18 mb of nitrogen in the form of N2 given that only fixed nitrogen is utilized by living systems. Laboratory tests performed at a total pressure of 1 bar and various partial pressures of dinitrogen (pN2 1-780 mb) show that nitrogen fixing organisms grow at pN2's of 18 mb or less, although the biomass and growth rates are decreased. The calcualted in vivo Km's ranged from 46 mb to 130 mb. If organisms adapted on Earth to a pH2 of 780 mb are capable of growing at these low partial pressures, it is conceivable that nitrogen was not the limiting factor in the evolution of life on early Mars.

Klingler, June M.↗

An optical processor for object recognition and tracking

The design and development of a miniaturized optical processor that performs real time image correlation are described. The optical correlator utilizes the Vander Lugt matched spatial filter technique. The correlation output, a focused beam of light, is imaged onto a CMOS photodetector array. In addition to performing target recognition, the device also tracks the target. The hardware, composed of optical and electro-optical components, occupies only 590 cu cm of volume. A complete correlator system would also include an input imaging lens. This optical processing system is compact, rugged, requires only 3.5 watts of operating power, and weighs less than 3 kg. It represents a major achievement in miniaturizing optical processors. When considered as a special-purpose processing unit, it is an attractive alternative to conventional digital image recognition processing. It is conceivable that the combined technology of both optical and ditital processing could result in a very advanced robot vision system.

Sloan, J.↗

Tropical Rainfall Measurement Mission

It has long been noted that anomalies in the sea surface temperature (SST) in the tropics are strongly correlated with climate in the temperate latitudes on a seasonal time scale. The ability to measure the global SST and the atmospheric pressure/temperature patterns has made great progress. However, rainfall measurement, the putative connection between the two, is poorly accomplished. The Tropical Rainfall Measurement Mission (TRMM) was conceived to fill this gap. The TRMM spacecraft would fly in a low inclination, (about 35 deg), orbit which would concentrate the sampling in the very important tropical latitudes. The precession of such an orbit would enable observations at all times of the day over the span of a month which would permit corrections for the diurnal cycle of precipitation which is quite marked in parts of the tropics. The payload of the TRMM spacecraft is carefully designed to provide accurate measurements of rain. It consists of microwave radiometers, a microwave radar and visible/infrared radiometer. The two types of microwave instruments provide direct measurements of the hydrometeors, each having strengths which compensate for weaknesses of the other. The VIS/IR instrument provides a connection to the long time series of VIS/IR measurements from polar and Geosynchronous spacecraft which are currently the best available source of global rainfall estimates. The TRMM is currently in a phase A (feasibility) study.

Wilheit, T. T.↗

The Shuttle Imaging Spectrometer Experiment (SISEX)

The concept of the imaging spectrometer is becoming established as a major new thrust in remote sensing of the earth. For several years, JPL has operated the airborne imaging spectrometer on a NASA C-130; this instrument has demonstrated the direct identification of surface materials using imaging spectrometry. An advanced aircraft instrument, the airborne visible/infrared imaging spectrometer (AVIRIS), began operation on a NASA U-2 in 1987. The Shuttle Imaging Spectrometer Experiment (SISEX) was conceived as the next step in the sequence, and would provide a relatively inexpensive demonstration of the concept in earth orbit. This paper describes the design and development status of SISEX and the status of the enabling technology.

Herring, Mark↗

Telerobot experiment concepts in space

A unique set of problems will be encountered in the development of telerobotic systems for space applications such as the Flight Telerobotic System. The dexterous manipulation of objects in zero g will be significantly different. Issues arise from mechanical response and operator interaction with the controls and displays. To reduce development risk, a series of experiments are conceived for the Space Shuttle.

Jenkins, Lyle M.↗

Effect of NASA advanced designs on thermal behavior of Ni-H2 cells

As part of an overall effort to advance the technology of nickel-hydrogen batteries for low earth orbit (LEO) applications, advanced designs for individual pressure vessel (IPV) nickel-hydrogen cells have been conceived. These designs incorporate alternative methods of oxygen recombination which affect the thermal behavior of the cells. The effect of these oxygen recombination methods on the cell temperature profiles will be examined.

Gonzalez-Sanabria, Olga D.↗

A 20/30 GHz personal access satellite system study

JPL is exploring the potential and feasibility of a personal access satellite system which will offer the user freedom and mobility. This paper defines the system concept and applications, presents a strawman design, and identifies the enabling technologies. The system as currently conceived could provide voice and data services to users in the Contiguous United States (CONUS) in the late 1990s to the early 2000s using the 20/30 GHz bands.

Sue, Miles K.↗

Terrain mapping for a roving planetary explorer

A prototype legged vehicle is being developed for an exploratory mission on another planet, conceivably Mars, where it is to traverse uncharted areas and collect material samples. The rover can construct from range imagery a geometric terrain representation; i.e., elevation map that includes uncertainty, unknown areas, and local features. An algorithm for constructing an elevation map from a single range image is presented: by virtue of working in spherical-polar space, the algorithm is independent of the desired map resolution and the orientation of the sensor, unlike algorithms that work in Cartesian space. Also presented is a two-stage matching technique (feature matching followed by iconic matching) that identifies the transformation T corresponding to the vehicle displacement between two viewing positions. To support legged locomotion over rough terrain, methods for evaluating regions of the constructed elevation maps as footholds are developed.

Hebert, M.↗

Portable High-Frequency Data-Acquisition System

Compact unit made of readily available solid-state components. Proposed system for acquisition of rapidly changing data self-contained and portable. Conceived for monitoring such aerodynamic effects as flutter, vibration, shock, sound, and pressure. Offers precise and fast acquisition of data and large data-storage capacity: has maximum sampling rate of 125 kHz, access time of 15 ns, and 1-million-bit memory. Measures time with "smart" (microprocessor-controlled) watch that maintains calendar time for more than 10 years without external power. Provides standby power from "smart" battery furnishing up to 1 ampere-hour of charge if power from main batteries lost.

Mustain, Roy W.↗

Stowable Mechanical Sound Suppressor

Stowable sound suppressor conceived for high-speed commercial transport (HSCT) engines. Suppressor is located just aft of variable nozzle of engine. During takeoff, when suppression of noise required, multisegmented system of separators rotates out of center plug across nozzle stream. Actuation accomplished by single ball-screw drive and links, similar to spokes in umbrella. With iris nozzle translated forward, circumferential row of tubes exposed. Pattern of tubes and separators form suppressor configuration. Flow stream through slots and tubes sized to takeoff area. Useful on any turbo-jet engine in which active suppression of sound required.

Thompson, Edward R.↗

Electrostatic Linear Actuator

Electrically charged helices attract or repel each other. Proposed electrostatic linear actuator made with intertwined dual helices, which holds charge-bearing surfaces. Dual-helix configuration provides relatively large unbroken facing charged surfaces (relatively large electrostatic force) within small volume. Inner helix slides axially in outer helix in response to voltages applied to conductors. Spiral form also makes components more rigid. Actuator conceived to have few moving parts and to be operable after long intervals of inactivity.

Collins, Earl R., Jr.↗

Heteropolar Magnetic Suspension

Compact permanent-magnet/electromagnet actuator has six degrees of freedom. Heteropolar magnetic actuator conceived for use as actively controlled vibration-isolating suspension device. Exerts forces along, and torques about, all three principal coordinate axes to resist all three components of translational vibration and all three components of rotational vibration. Inner cylinder suspended magnetically within outer cylinder. Electro-magnet coils interact with fields of permanent magnets to provide active control of suspending force and torque.

Misovec, Kathleen↗

Air-Velocity Sensor For Helicopter

New airspeed sensor conceived for accurate measurement of both airspeed and direction of flight of helicopter. Direction of motion of helicopter displayed by lighting of one of series of lamps encircling digital display of airspeed. Pressure transducer measures difference between impact and static pressures at tip of rotor blade by use of conventional pitot-static-tube assembly.

Garner, H. Douglas↗

Removing Burrs In Confined Spaces

Special tool proposed to remove burrs on ring edges left by operations of hollow mill near bases of round posts. Conceived because posts placed so closely together that ordinary and makeshift tools damage adjacent posts and difficult or impossible to use in narrow, deep spaces surrounding edges to be deburred. Designed specifically for use on hollow liquid-oxygen-injector posts of spacecraft engine, general tool concept adaptable to similar deburring problems on otherwise inaccessible parts.

Windbiel, Friedrich↗

Identifying Bearing Balls With Radioisotopes

Proposed scheme for identification of members of manufactured lot of bearing balls based on detection of characteristic isotopes. All balls in lot irradiated to produce easily recognized radioactive isotopes in known concentrations and/or known ratios of concentrations and known rates of decay on their surfaces. Scheme conceived to track precise bearing balls through various stages of assembly, disassembly, and processing.

Butner, Myles F.↗

Controlling Gas-Flow Mass Ratios

Proposed system automatically controls proportions of gases flowing in supply lines. Conceived for control of oxidizer-to-fuel ratio in new gaseous-propellant rocket engines. Gas-flow control system measures temperatures and pressures at various points. From data, calculates control voltages for electronic pressure regulators for oxygen and hydrogen. System includes commercially available components. Applicable to control of mass ratios in such gaseous industrial processes as chemical-vapor depostion of semiconductor materials and in automotive engines operating on compressed natural gas.

Morris, Brian G.↗

Laser-powered Martian rover

Two rover concepts were considered: an unpressurized skeleton vehicle having available 4.5 kW of electrical power and limited to a range of about 10 km from a temporary Martian base and a much larger surface exploration vehicle (SEV) operating on a maximum 75-kW power level and essentially unrestricted in range or mission. The only baseline reference system was a battery-operated skeleton vehicle with very limited mission capability and range and which would repeatedly return to its temporary base for battery recharging. It was quickly concluded that laser powering would be an uneconomical overkill for this concept. The SEV, on the other hand, is a new rover concept that is especially suited for powering by orbiting solar or electrically pumped lasers. Such vehicles are visualized as mobile habitats with full life-support systems onboard, having unlimited range over the Martian surface, and having extensive mission capability (e.g., core drilling and sampling, construction of shelters for protection from solar flares and dust storms, etc.). Laser power beaming to SEV's was shown to have the following advantages: (1) continuous energy supply by three orbiting lasers at 2000 km (no storage requirements as during Martian night with direct solar powering); (2) long-term supply without replacement; (3) very high power available (MW level possible); and (4) greatly enhanced mission enabling capability beyond anything currently conceived.

Harries, W. L.↗

Evolutionary space station fluids management strategies

Results are summarized for an 11-month study to define fluid storage and handling strategies and requirements for various specific mission case studies and their associated design impacts on the Space Station. There are a variety of fluid users which require a variety of fluids and use rates. Also, the cryogenic propellants required for NASA's STV, Planetary, and Code Z missions are enormous. The storage methods must accommodate fluids ranging from a high pressure gas or supercritical state fluid to a sub-cooled liquid (and superfluid helium). These requirements begin in the year 1994, reach a maximum of nearly 1800 metric tons in the year 2004, and trail off to the year 2018, as currently planned. It is conceivable that the cryogenic propellant needs for the STV and/or Lunar mission models will be met by LTCSF LH2/LO2 tanksets attached to the SS truss structure. Concepts and corresponding transfer and delivery operations have been presented for STV propellant provisioning from the SS. A growth orbit maneuvering vehicle (OMV) and associated servicing capability will be required to move tanksets from delivery launch vehicles to the SS or co-orbiting platforms. Also, appropriate changes to the software used for OMV operation are necessary to allow for the combined operation of the growth OMV. To support fluid management activities at the Space Station for the experimental payloads and propellant provisioning, there must be truss structure space allocated for fluid carriers and propellant tanksets, and substantial beam strengthening may be required. The Station must have two Mobile Remote Manipulator Systems (MRMS) and the growth OMV propellant handling operations for the STV at the SS. Propellant needs for the Planetary Initiatives and Code Z mission models will most likely be provided by co-orbiting propellant platform(s). Space Station impacts for Code Z mission fluid management activities will be minimal.

Source record↗