Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase Array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

NISAR L-Band Feed Antenna Tiles, Preliminary Design

Being developed in partnership between NASA and the Indian Space Research Organisation (ISRO), the NASA-ISRO Synthetic Aperture Radar (NISAR) satellite is planned to launch in late 2020. NISAR will measure many aspects of how Earth is changing with unprecedented accuracy on a global scale from a Low Earth Orbit (LEO) platform. With a 12m deployable mesh reflector, NISAR will feature one of the largest deployable mesh reflector ever launched for a scientific mission. Two large planar phased arrays will feed the reflector, one that will operate at L-Band and be developed by the Jet Propulsion Laboratory (JPL), and an S-band array that will be developed at the ISRO Space Application Centre (SAC). This paper describes the preliminary design of the L-Band feed array.

deployable mesh reflector↗
NASA NTRS2019

Measured and Simulated Acoustic Signature of a Full-Scale Aircraft with Airframe Noise Reduction Technology Installed

Microphone phased-array and pole-mounted microphone data gathered during the NASA Acoustics Research Measurements flight tests were used to benchmark results from companion full-scale aeroacoustics simulations. Conducted with the lattice Boltzmann solver PowerFLOW®, the simulations predicted the acoustic behavior of various tested aircraft configurations. Emphasis was placed on those flown during the third flight test - a Fowler flap-equipped Gulfstream G-III with and without noise abatement technology on the main landing gear. Direct comparisons between experimental and synthetic microphone phasedarray data were achieved by applying the same processing and deconvolution technique to both sets of data. To extend the validation of the computations to the metric used for noise certification, the Effective Perceived Noise Level, a high-fidelity digital model of the nose landing gear, which was excluded from earlier computations, was developed and integrated into the G-III aircraft geometry. The acoustic study presented here demonstrates that the simulated beamform maps and corresponding integrated farfield spectra accurately predict the locations and strengths of the prominent airframe noise sources present on the G-III aircraft.

Khorrami, Mehdi R.↗
NASA NTRS2020

Central Valley Water Resources: Improving California Groundwater Assessments using GRACE and InSAR Datasets for Water Resource Management

California’s Central Valley is one of the most productive agricultural areas in the world, producing approximately $20 billion in crops annually. The recent California droughts of 2007-2010 and 2012-2019 resulted in increased groundwater pumping in the Central Valley to adequately irrigate farmland. Overdrafting of the Central Valley aquifer results in groundwater depletion, land subsidence, and permanent loss of groundwater storage. In 2014, depletion of groundwater led the state of California to enact the Sustainable Groundwater Management Act (SGMA),requiring critically overdrafted, high, and medium priority sub-basins to reach sustainable levels of groundwater pumping and recharge by 2042. SGMA allows local Groundwater Sustainability Agencies (GSAs) the authority to create Groundwater Sustainability Plans (GSPs) at the sub-basin level. To assist California’s Department of Water Resources (DWR), this project quantified groundwater change and land subsidence in Central Valley sub-basins with sparse or unreliable well and Geographic Positioning Systems (GPS) data. This was done using NASA’s Gravity Recovery and Climate Experiment (GRACE), GRACE FollowOn (GRACE-FO), and interferograms derived from Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Advanced Land Observing Satellite 2 (ALOS-2)Phased Array L-band Synthetic Aperture Radar 2 (PALSAR-2). Time series of the GRACE and InSAR data were compared with well and GPS data in data-dense sub-basins to determine the feasibility of these datasets for groundwater storage and subsidence monitoring. We found that GRACE and InSAR data are effective tools for determining groundwater change and land subsidence and can be used on their own to monitor sub-basins in the absence of well and GPS data

Water Resources↗
NASA NTRS2020

Central Valley Water Resources: Improving California Groundwater Assessments using GRACE and InSAR Datasets for Water Resource Management

California’s Central Valley is one of the most productive agricultural areas in the world, producing approximately $20 billion in crops annually. The recent California droughts of 2007-2010 and 2011-2017 resulted in increased groundwater pumping in the Central Valley to adequately irrigate farmland. Overdrafting of the Central Valley aquifer results in groundwater depletion, land subsidence, and permanent loss of groundwater storage. In 2014, depletion of groundwater led the state of California to enact the Sustainable Groundwater Management Act (SGMA), requiring critically overdrafted, high, and medium priority sub-basins to reach sustainable levels of groundwater pumping and recharge by 2042. SGMA allows local Groundwater Sustainability Agencies the authority to create Groundwater Sustainability Plans at the sub-basin level. To assist California’s Department of Water Resources, this project quantified groundwater change and land subsidence in Central Valley sub-basins with sparse or unreliable well and GPS data. This was done using NASA’s Gravity Recovery and Climate Experiment (GRACE), GRACE Follow-On (GRACE-FO), and interferograms derived from Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) and Advanced Land Observing Satellite 2 (ALOS-2) Phased Array L-band Synthetic Aperture Radar 2 (PALSAR-2). Time series of the GRACE and InSAR data were compared with well and GPS data in data-dense sub-basins to determine the feasibility of these datasets for groundwater storage and subsidence monitoring. We found thatGRACE and InSAR data are effective tools for determining groundwater change and land subsidence and can be used on their own to monitor sub-basins in the absence of well and GPS data.

Water Resources↗
NASA NTRS2020

Fisher's Peak Ecological Forecasting - Mapping Biomass to Inform Conservation Planning of a Future State Park in Southern Colorado

Fisher’s Peak is a 77.5 km2 property southeast of Trinidad, Colorado that is planned to become Colorado’s newest state park. The area has experienced limited anthropogenic disturbance and is home to an abundance of unique habitats and species. A rapid, approximately 900 m change in elevation over the extent of the area nurtures a variety of plants and animals, including the endangered New Mexico meadow jumping mouse. In 2019, the State of Colorado obtained Fisher’s Peak with plans to make it Colorado’s second largest state park. A diverse group of collaborators, including the Colorado State Forest Service and The Nature Conservancy, worked closely to design the state park to maximize recreation opportunity while conserving the property’s rich habitats and biodiversity. The Fisher’s Peak Ecological Forecasting Team utilized Light Detection and Ranging (LiDAR) surveys, in situ forest inventory data, and Earth observations from Landsat 8 Operational Land Imager (OLI), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), Sentinel-2 Multispectral Instrument (MSI), Advanced Land Observing Satellite 2 (ALOS-2) Phased Array type L-band Synthetic Aperture Radar (PALSAR-2) and the Shuttle Radar Topography Mission (SRTM) to quantify and map biomass over the extent of the study area. The results from modeling biomass had an out-of-bag root mean square error of 55 Mg/ha and an R2 of 12. The resulting map indicates areas where carbon storage on the property is high, informing decision-making processes for future park development. While more in situ training data may improve modeling capacity for biomass in the Fisher’s Peak area, this work represents a feasible attempt to better understand biomass distribution using earth observation

Lauren Lad↗
NASA NTRS2020

Fisher's Peak Ecological Forecasting: Mapping Biomass to Inform Conservation Planning of a Future State Park in Southern Colorado

Fisher’s Peak is a 77.5 km2 property southeast of Trinidad, Colorado that is planned to become Colorado’s newest state park. The area has experienced limited anthropogenic disturbance and is home to an abundance of unique habitats and species. A rapid, approximately 900 m change in elevation over the extent of the area nurtures a variety of plants and animals, including the endangered New Mexico meadow jumping mouse. In 2019, the State of Colorado obtained Fisher’s Peak with plans to make it Colorado’s second largest state park. A diverse group of collaborators, including the Colorado State Forest Service and The Nature Conservancy, worked closely to design the state park to maximize recreation opportunity while conserving the property’s rich habitats and biodiversity. The Fisher’s Peak Ecological Forecasting Team utilized Light Detection and Ranging (LiDAR) surveys, in situ forest inventory data, and Earth observations from Landsat8 Operational Land Imager (OLI), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR), Sentinel-2 Multispectral Instrument (MSI), Advanced Land Observing Satellite 2 (ALOS-2) Phased Array type L-band Synthetic Aperture Radar (PALSAR-2) and the Shuttle Radar Topography Mission (SRTM) to quantify and map biomass over the extent of the study area. The results from modeling biomass had an out-of-bag root mean square error of 55 Mg/ha and an R2 of 12. The resulting map indicates areas where carbon storage on the property is high, informing decision-making processes for future park development. While more in situ training data may improve modeling capacity for biomass in the Fisher’s Peak area, this work represents a feasible attempt to better understand biomass distribution using earth observation.

DEVELOP Tech Paper↗
NASA NTRSDate not supplied

Titan Turtle: NIAC Phase II Design for a Submersible Vehicle for Titan Exploration

Conceptual designs for a submersible vehicle for exploration of the hydrocarbon seas of Saturn’s moon Titan were done by the NASA Glenn COMPASS systems engineering team, as part of the NASA’s Innovative Advanced Concepts (NIAC) program. The efforts investigated what approaches and technologies would allow exploration below the surface of the low temperature (–180 °C) hydrocarbon seas of Titan. The Phase-II design refined the design concepts, looking at a smaller design supported by an orbital relay, the “Titan Turtle”. The phase-II project resulted in a smaller vehicle using an orbiter supported relay/navigation link to eliminate the requirement for a large phased-array antenna. Eliminating the DTE communications requirement also reduced the associated high power required by the communications system.

Steven R Oleson↗
NASA NTRSDate not supplied

Titan Turtle: NIAC Phase II Design for a Submersible Vehicle for Titan Exploration

Conceptual designs for a submersible vehicle for exploration of the hydrocarbon seas of Saturn’s moon Titan were done by the NASA Glenn COMPASS systems engineering team, as part of the NASA’s Innovative Advanced Concepts (NIAC) program. The efforts investigated what approaches and technologies would allow exploration below the surface of the low temperature (–180 °C) hydrocarbon seas of Titan. The Phase-II design refined the design concepts, looking at a smaller design supported by an orbital relay, the “Titan Turtle”. The phase-II project resulted in a smaller vehicle using an orbiter supported relay/navigation link to eliminate the requirement for a large phased-array antenna. Eliminating the DTE communications requirement also reduced the associated high power required by the communications system.

Lunar and Planetary Scientific Exploration↗
NASA NTRS2020

Central Valley Water Resources II: Groundwater Sustainability Management Support in the California Central Valley using GRACE and InSAR Datasets

California’s Central Valley is one of the most productive agricultural regions in the United States, producing a fourth of the nation’s food supply. The water demand in this region is heavily dependent on groundwater resources, resulting in over pumping of aquifers at unsustainable rates during recent periods of severe drought. Over the past century, Central Valley aquifers have experienced a significant decline in groundwater levels, resulting in land subsidence and irreversible loss in groundwater storage. In 2014, the state enacted the Sustainable Groundwater Management Act, requiring high and medium priority subbasins to suspend overdraft and achieve sustainable levels of pumping and recharge by 2042.The California Department of Water Resources (DWR) oversees subbasin groundwater management; however, monitoring remains challenging due to sparse and inconsistent in situ data. To assist the DWR, this project developed a user-friendly executable application and an interactive visualization tool to quantify groundwater storage and land subsidence trends using remotely sensed and in situ data. The team utilized NASA’s Gravity Recovery and Climate Experiment (GRACE), GRACE Follow-On (GRACE-FO), Sentinel-1 C-band Synthetic Aperture Radar (C-SAR) interferograms, and Advanced Land Observing Satellite 2 (ALOS-2) Phased Array L-band Synthetic Aperture Radar 2 (PALSAR-2) interferograms in conjunction with well and GPS measurements to analyze groundwater and subsidence trends. GRACE and well data returns produced a strong Pearson correlation of .84, while Sentinel-1 and GPS data returns produced a Pearson correlation of .41 over the entire Central Valley. These findings suggest remotely sensed GRACE and interferometric SAR data can be used in the absence of in situ data.

DEVELOP Project Summary↗
NASA NTRS2000

Interstellar beamer engineering

The fundamental differences between solar sails and interstellar beam riders are presented. Design requirements and design considerations are developed for an interstellar beamer phased array of gigantic proportions of photon pushing beam riding spacecraft to significant fractions of the speed of light.

interstellar↗
NASA NTRS1993

Pointing Mechanisms for the Shuttle Radar Laboratory

In December of 1993, the Shuttle Radar Laboratory (SRL) is scheduled for launch on the first of its two missions. The SRL has three major radar instrument, two distributed phased-array antennas that make up the Spaceborne Imaging Radar-C System (SIR-S) and are capable of being electronically steered and one which is an Z-Band Synthetic Aperture Radas (X-SAR) which is pointed mechanically by a suite of mechanisms.

SRL↗
NASA NTRS2021

Plug20 Test Report

This report documents a test of aircraft exhaust nozzle designs applicable to commercial supersonic aircraft as envisioned in the 2025-2035 time frame. The test is primarily intended to provide data about the noise such aircraft would produce during landing and takeoff (LTO) operation, specifically the jet noise component of this noise. The tests were conducted at the NASA Glenn Research Center’s Aero-Acoustic Propulsion Laboratory in March 2020. The tests used the High-Flow Jet Exhaust Rig in the Nozzle Acoustic Test Rig which simulates the flow from a dual-stream turbofan engine in a flight stream. Seven exhaust configurations were tested with various combinations of internal mixer and external plug, and covered engine cycles having nozzle pressures from 1.5 to 2.3 at a flight speed of Mach 0.3. A few unheated flow conditions were also tested to tie results to other baseline test results. Data acquired and included in this report are 1) far-field acoustic spectra, 2) phased array measurements of noise source distributions, and 3) background-oriented schlieren of the flow near the nozzles. These data, along with the nozzle geometry in CAD format, are given as Appendices and are available online.

Jet noise↗
NASA NTRS2017

Subspace-based Background Subtraction Applied to Aeroacoustic Wind Tunnel Testing

A subspace-based form of background subtraction is presented and applied to aeroacoustic wind tunnel data. A variant of this method has seen use in other fields such as climatology and medical imaging. The technique is based on an eigenvalue decomposition of the background noise cross-spectral matrix. Simulated results indicate similar performance to conventional background subtraction when the subtracted spectra are weaker than the true contaminating background levels. Superior performance is observed when the subtracted spectra are stronger than the true contaminating background levels, and when background data do not match between measurements. Experimental results show limited success in recovering signal behavior for data in which conventional background subtraction fails. The results also demonstrate the subspace subtraction technique's ability to maintain a physical coherence relationship in the modified cross-spectral matrix. Deconvolution results from microphone phased array data indicate that array integration methods are largely insensitive to subtraction type, and that background subtraction with appropriate background data is an effective alternative to diagonal removal.

deconvolution↗
NASA NTRS2019

Directed-energy propulsion architecture for deep-space missions with characteristic velocities of order 100 km/s

This paper investigates the feasibility of a propulsion system architecture that may enable missions with characteristic velocities in the range 100 to 200 km/s. The conceptual architecture is based on the use of a kilometer-scale, space-based, phased-array laser with an output power of hundreds of megawatts that beams power over distances up to 40 au to a receiving vehicle.

McCarty, Steven↗
NASA NTRS2021

Maya Forest Water Resources I: Using NASA Earth Observations to Map Forested Inundation in the Maya Forest

As climate change increases the severity and frequency of extreme weather events in the tropics, it is vital for the safety of local communities and the health of ecosystems to monitor seasonal inundation. Forested inundation affects the ability of forested wetlands to provide ecosystem services, such as flood mitigation, water filtration, carbon storage, and erosion mitigation. While ground-based monitoring has traditionally been used to map inundation extent, those methods are costly and time-intensive. The NASA DEVELOP team focused on seasonal inundation throughout 2008 in the Maya Forest, when changes in inundation were drastic. To monitor seasonal inundation, our team used in situ field data and Earth observations from Landsat 7 Enhanced Thematic Mapper (ETM+), Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) 1, Shuttle Radar Topography Mission (SRTM), and products from the Ice, Cloud, and Land Elevation Satellite (ICESat). The team applied a Random Forest algorithm to Landsat 7 imagery, generating an object-level land cover classification with an overall accuracy of 72.1% and forest class with 100% recall and 78% precision. The team applied L-band backscatter thresholds from existing literature to forest-masked ALOS imagery and refined the thresholds in an iterative process using field data and hydrology models to delineate seasonal inundation extent. These publicly available data products help end users from Belize’s Land Information Center (LIC) and Forest Department, Guatemala’s Center for Monitoring and Evaluation (CEMEC), and Mexico’s El Colegio de la Frontera Sur (ECOSUR) to inform land management and protect community infrastructure.

Madelyn Savan↗
NASA NTRSDate not supplied

Estimating Forest Stand Height in Savannakhet, Lao PDR Using InSAR and Backscatter Methods with L-Band SAR Data

Forest stand height (FSH), or average canopy height, serves as an important indicator for forest monitoring. The information provided about above ground biomass for greenhouse gas emissions reporting, and estimating carbon storage is relevant for reporting for Reducing Emissions from Deforestation and Forest Degradation (REDD+). A novel forest height estimation method utilizing a fusion of backscatter and Interferometric Synthetic Aperture Radar (InSAR) data from JAXA’s Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar (ALOS PALSAR) are applied to a use case in Savannakhet, Lao. Compared with LiDAR, the estimated height from the fusion method had an RMSE of 4.90 m and an R2 of 0.26. These results are comparable to previous studies using SAR estimation techniques. Despite limitations of data quality and quantity, the Savannakhet, Lao use case demonstrates the applicability of these techniques utilizing L-band SAR data for estimating FSH in tropical forests and can be used as a springboard for use of L-band data from the future NASA-ISRO SAR (NISAR) mission.

remote sensing↗
NASA NTRS2021

Carolina Coastal Plain Ecological Forecasting: Utilizing NASA Earth Observations to Map Suitable Venus Flytrap Habitat in an Effort to Inform Conservation, Seed Banking, and Reintroduction in the Carolina Coastal Plain and Sandhills Regions

Although the carnivorous plant Venus flytrap (Dionaea muscipula) is recognized globally, its native range is restricted to a small portion of the North and South Carolina Coastal Plain and Sandhills. Within this limited range, Venus flytrap populations are threatened by habitat loss, fire suppression, and poaching. NASA DEVELOP partnered with the North Carolina Botanical Garden (NCBG), the University of North Carolina Herbarium (NCU), and the North Carolina Natural Heritage Program (NCNHP) to support Venus flytrap conservation. The team developed models based on species presence data and environmental variables using the Software for Assisted Habitat Modeling (SAHM) to create a 2021 habitat suitability map for Venus flytrap. These models incorporated Earth observations collected by Landsat 8 Thermal Infrared Sensor (TIRS), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Advanced Land Observation Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR), and Sentinel-2 Multispectral Instrument (MSI). To predict areas at high risk of development, the team produced a 2050 land-use change map using TerrSet Land Change Modeler. The team found potential areas of conflict between predicted habitat and forecasted future development. Many areas of suitable habitat were concentrated along the coast where development was likely to occur, placing populations there at risk of extirpation. Overlaying suitable habitat with forecasted land change also identified suitable habitats with minimal risk of development, which may serve as lasting Venus flytrap habitat. These results can inform the NCBG and NCNHP’s conservation decision-making, including targeted seed banking, reintroduction, and prioritization of enduring habitats for protection and management.

Monika Rock↗