Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Probing how Ti- and Nb-substitution affect the stability and improve the electrochemical performance of β- and ε-LiVOPO 4

LiVOPO 4 is a promising next-generation multi-electron cathode material, boasting a theoretical capacity of 305 mA h g -1 , significantly higher than any commercially used Li-ion battery cathode material. However, the material still faces several limitations, including the difficulty in attaining the full theoretical capacity at higher rates and capacity fade over several cycles. Here, in this paper, we show that Ti- and Nb-substitution can be used to improve the thermal stability and electrochemical performance of LiVOPO 4 . We show through in situ heating with XRD and a novel gradient heating technique that both Ti- and Nb-substitution cause β-LiVOPO 4 to be stabilized relative to ε-LiVOPO 4 . This is due to transition-metal substitution, which increases the O-vacancy formation energies, pushing the β → ε transition to higher temperatures. We show that it is still possible to synthesize pure-phase ε-LiVOPO 4 through the use of high temperatures to generate these O-vacancies. We show that even 1% of Ti- or Nb-substitution can improve the initial capacity and long term cycling capability of LiVOPO 4 by improving the high-voltage capacity and reducing the capacity fade in both the high- and low-voltage regions. This is due to the overall improved Li + ion diffusion which is caused by an improved charge-transfer resistance during cycling.

25 ENERGY STORAGE↗

A new mechanism of stabilizing SEI of Si anode driven by crosstalk behavior and its potential for developing high performance Si-based batteries

Stabilizing solid electrolyte interphase (SEI) is a key factor for determining cell performance of Silicon (Si) anode, such as safety, cycle lifetime, and calendar lifetime. Here, we found a new potential for stabilizing SEI of the Si anode, driven by crosstalk with cathode material. Here we investigated the effect of crosstalk on the chemistry of SEI of the Si anode as a function of three different, representative cathode materials: LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and LiFePO 4 (LFP). Specifically, we observed that crosstalk significantly affected the formation and growth mechanism of SEI layer on the Si anodes. Unexpectedly, dissolved Fe ions from the LFP cathode has a positive impact on the chemistry and electrochemical stability of the SEI layer of Si anode compared to the other cathodes, resulting in better electrochemical performance in terms of initial coulombic efficiency and capacity fade.

25 ENERGY STORAGE↗

Lithium–Iron (III) Fluoride Battery with Double Surface Protection

Abstract Lithium–metal fluoride batteries promise significantly higher energy density than the state‐of‐the‐art lithium‐ion batteries and lithium–sulfur batteries. Unfortunately, commercialization of metal fluoride cathodes is prevented by their high resistance, irreversible structural change, and rapid degradation. In this study, a substantial boost in metal fluoride (MF) cathode stability by designing nanostructure with two layers of protective shells—one deposited ex situ and the other in situ is demonstrated. Such methodology achieves over 90% capacity retention after 300 charge–discharge cycles, producing the first report on FeF 3 as a cathode material, where a very high capacity utilization in combination with excellent stability is approaching the level needed for practical applications of FeF 3 . The cathode solid electrolyte interphase (CEI) containing lithium oxalate and BF bond containing anions is found to effectively protect the cathode material from direct contact with electrolytes, thus greatly suppressing the dissolution of Fe. Quantum chemistry and molecular dynamics calculations provide unique insights into the mechanisms of CEI layer formation. As a result, this work not only demonstrates unprecedented performance, but also provides the reader with a better fundamental understanding of electrochemical behavior of MF cathodes and the positive impact observed with the application of a lithium bis(oxalato)borate salt in the electrolyte.

Zhao, Enbo↗

Promoting Reversibility of Multielectron Redox in Alkali-Rich Sulfide Cathodes through Cryomilling

We report conventional cathodes for Li-ion batteries (LIBs) are reaching their theoretical capacity limits. One way to meet the growing demands for high-capacity LIBs is by developing so-called Li-rich cathode materials that greatly benefit from additional capacities from anionic moieties in the structure. Li-rich materials are intrinsically subject to higher degrees of (de)intercalation, leaving the particles more prone to fractures and thus rapid capacity fade. Alkali-rich LiNaFeS 2 reversibly cycles with capacities exceeding 300 mAh g -1 , but its capacity fades faster than an isostructural material Li 2 FeS 2 . Using synchrotron-based transmission X-ray microscopy (TXM), we demonstrate that the capacity fade of LiNaFeS 2 stems from particle fractures in the first charge cycle. We improve the cycling performance of LiNaFeS 2 by means of cryomilling, which enhances capacity retention at cycle 50 by 76%. Through crystallographic and morphological characterization techniques, we confirm that cryomilling not only decreases particle and crystallite size while increasing microstrain but also prevents particles from fracturing. Cryomilling is a powerful tool to engineer nanoscale battery materials, and TXM allows the direct observation of morphological changes of the particles, which can be leveraged to develop next-generation cathode materials for LIBs.

25 ENERGY STORAGE↗

Stable synthesis of few-layered boron nitride nanotubes by anodic arc discharge

Boron nitride nanotubes (BNNTs) were successfully synthesized by a dc arc discharge using a boron-rich anode as synthesis feedstock in a nitrogen gas environment at near atmospheric pressure. The synthesis was achieved independent of the cathode material suggesting that under such conditions the arc operates in so-called anodic mode with the anode material being consumed by evaporation due to the arc heating. In order to sustain the arc current by thermionic electron emission, the cathode has to be at sufficiently high temperature, which for a typical arc current density of similar to 100 A/cm 2 , is above the boron melting point (2350 K). With both electrodes made from the same boron-rich alloy, we found that the arc operation unstable due to frequent sticking between two molten electrodes and formation of molten droplets. We achieved a stable and reliable arc operation and arc synthesis with the boronrich anode and the cathode made from a refractory metal which has a melting temperature above the melting point of boron. Ex-situ characterization of synthesized BNNTs with electron microscopy and Raman spectroscopy revealed that independent of the cathode material, the tubes are primarily single and double walled. Our results also show evidence of root-growth of BNNTs produced in the arc discharge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect Chemistry and Electrical Properties of (La0.8Ca0.2)(0.95)FeO3-delta

A–site deficient calcium doped lanthanum ferrite (LCF) powders are synthesized and tested to characterize their electrochemical properties for use as cathode materials in single–step co–fired solid oxide fuel cells (SOFCs). Four–probe conductivity and oxygen permeability tests show superior performance compared to conventional SOFC cathode materials. A point–defect model is applied to interpret the experimental data yielding concentrations of the predominant defects as a function of pO2 and temperature.

30 DIRECT ENERGY CONVERSION↗

Role of Redox-Inactive Transition-Metals in the Behavior of Cation-Disordered Rocksalt Cathodes

Owing to the capacity boost from oxygen redox activities, Li-rich cation-disordered rocksalts (LRCDRS) represent a new class of promising high-energy Li-ion battery cathode materials. Redox-inactive transition-metal (TM) cations, typically d 0 TM, are essential in the formation of rocksalt phases, however, their role in electrochemical performance and cathode stability is largely unknown. In the present study, the effect of two d 0 TM (Nb 5+ and Ti 4+ ) is systematically compared on the redox chemistry of Mn-based model LRCDRS cathodes, namely Li 1.3 Nb 0.3 Mn 0.4 O 2 (LNMO), Li 1.25 Nb 0.15 Ti 0.2 Mn 0.4 O 2 (LNTMO), and Li 1.2 Ti 0.4 Mn 0.4 O 2 (LTMO). Although electrochemically inactive, d 0 TM serves as a modulator for oxygen redox, with Nb 5+ significantly enhancing initial charge storage contribution from oxygen redox. Further studies using differential electrochemical mass spectroscopy and resonant inelastic X-ray scattering reveal that Ti 4+ is better in stabilizing the oxidized oxygen anions (O n- , 0 < n < 2), leading to a more reversible O redox process with less oxygen gas release. As a result, much improved chemical, structural and cycling stabilities are achieved on LTMO. Detailed evaluation on the effect of d 0 TM on degradation mechanism further suggests that proper design of redox-inactive TM cations provides an important avenue to balanced capacity and stability in this newer class of cathode materials.

25 ENERGY STORAGE↗

High-Nickel Cathodes with Mechanical and Interfacial Robustness via Tailored Concentration Gradients for Stable Li-Ion Batteries

Here, we have developed a versatile mathematical framework integrated with an automated reactor system to design and reify highly customizable full concentration gradient (FCG) in high-nickel cathodes for advanced Li-ion batteries. This method provides precise and independent control of the average composition, slope, and curvature of FCGs, enabling the optimization of structural and mechanical properties of the cathode materials. We have showcased this method with Ni 0.8 Co 0.1 Mn 0.1 (OH) 2 precursors of controlled FCGs, which unlocked an optimized cathode with excellent cycling stability without crack formation after repeated cycles. This work opens up new possibilities for the design and manufacturing of advanced cathode materials, enabling safer, high-performance batteries.

25 ENERGY STORAGE↗

High capacity Li/Ni rich Ni-Ti-Mo oxide cathode for Li-ion batteries

With the rising cost and insufficient supply of cobalt, the thrust for cobalt-free cathode materials with the high specific capacity to build Li-ion batteries has increased significantly. Using nickel as the prime electrochemical active species, we have synthesized a new-class of materials with the combination of ordered and disordered phases. To obtain high capacity and electrical charge neutrality, stoichiometry of cations designed in a way that it forms Li/Ni rich Ni-Ti-Mo oxide materials. In addition to conventional capacity from redox activity of transition metals, partially reversible oxygen redox reaction also contributes to electrochemical activity and thus results in unusual high capacity. The resultant cathode materials of LiNi 0.5 Ti 0.5 O 2 -(Li 4 MoO 5 ) 0.8 and LiNiO 2 mixture phases reach the specific capacity of 240 mAh/g. Detailed soft X-ray absorption spectroscopy and electron microscopy are used to reveal the crystal phases in this system and trace changes in the Ni 2+ /Ni 4+ redox couple during charge-discharge processes. Finally, such comprehensive analysis of ordered-disordered oxides suggesting potentiality to develop high-capacity cobalt-free cathodes.

25 ENERGY STORAGE↗

Electrochemical Performance and Stability of the Cathode for Solid Oxide Fuel Cells IV. On the Ohmic loss in anode supported button cells with LSM or LSCF cathodes

Anode-supported solid oxide fuel cells (SOFC) with a variety of YSZ electrolyte thicknesses were fabricated by tape casting and lamination. The preparation of the YSZ electrolyte tapes with various thicknesses was accomplished by using doctor blades with different gaps between the precision machined, polished blade and the casting surface. The green tape was cut into discs, sintered at 1385°C for 2 h, and subsequently creep-flattened at 1350°C for 2 h. Either LSCF with an SDC interlayer or LSM+YSZ composite was used as the cathode material for the fuel cells. The ohmic resistances of these anode-supported fuel cells were characterized by electrochemical impedance spectroscopy at temperatures from 500°C to 750°C. A linear relationship was found between the ohmic resistance of the fuel cell and the YSZ electrolyte thickness at all the measuring temperatures for both LSCF and LSM+YSZ cathode fuel cells. The ionic conductivities of the YSZ electrolyte, derived for the fuel cells with LSM+YSZ or LSCF cathodes, were independent of the cathode material and cell configuration. The ionic conductivities of the YSZ electrolyte was slightly lower than that of the bulk material, possibly due to Ni-doping into the electrolyte. The fuel cell with a SDC interlayer and LSCF cathode showed larger intercept resistance than the fuel cell with LSM+YSZ cathode, which was possibly due to the imperfect contact between the SDC interlayer and the YSZ electrolyte and the migration of Zr into the SDC interlayer to form an insulating solid solution during cell fabrication. Calculations of the contribution of the YSZ electrolyte to the total ohmic resistance showed that YSZ was still a satisfactory electrolyte at temperatures above 650°C. Explorations should be directed to reduce the intercept resistance to achieve significant improvement in cell performance.

30 DIRECT ENERGY CONVERSION↗

Exposure History and its Effect Towards Stabilizing Li Exchange Across Disordered Rock Salt Interfaces

Abstract The application of lithium rich disordered rock salts (DRX) as cathode materials has greatly expanded the materials space for high energy density cathodes. These materials are able to consistently achieve capacities higher than via a complex percolation based intercalation mechanism. Most current DRX materials face significant capacity fade when cycled over an extended period. One of the factors responsible for this could be deleterious side effect of interface reactions between the electrode and electrolyte at high voltage. We aim to focus on one aspect of this interaction, i.e the effect of exposure to electrolyte on the surface and its effect on the electrochemical properties of (LMNOF) powder. LMNOF was systematically treated in an electrolyte solution for varying periods of time at an elevated temperature. Treated samples exhibit surface layer modification (removal of F rich surface layer), leading to a 10 % improvement in the capacity retention behavior of LMNOF. Surface and bulk based measurements indicate an increase in disorder and gradual removal of F and Li. All of these processes mimic an aging process similar to cycling. This a priori formed interface allows for increased stability with respect to retention of capacity and oxygen loss.

Satish, Rohit↗

Structural, spectroscopic and magnetic investigation of the LiFe{sub 1-x}Mn{sub x}PO{sub 4} (x=0-0.18) solid solution

Different solid state and sol-gel preparations of undoped and Mn substituted cathode material LiFePO{sub 4} are investigated. Li{sub 3}PO{sub 4}, Fe{sub 2}P{sub 2}O{sub 7} and Li{sub 4}P{sub 2}O{sub 7} are detected and quantified by XRPD only in solid state synthesis. In addition, micro-Raman spectra reveal low amount of different iron oxides clusters. EPR data, combined with the results of magnetization measurements, evidence signals from Fe{sup 3+} ions in maghemite nanoclusters, and in Li{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}. The sol-gel synthesis, showing the lowest amount of impurity phases, seems the most suitable to obtain a promising cathode material. The structural refinement gives new insights into the cation distribution of the Mn doped triphylite structure: (i) about 85% of Mn{sup 2+} ions substitutes Fe{sup 2+}, the remaining 15% being located on the Li site, thus suggesting a structural disorder also confirmed by EPR and micro-Raman results; (ii) Mn ions on the Li site are responsible for the observed slight cell volume expansion. - Graphical abstract: The combined use of different spectroscopic, structural and magnetic techniques has been successfully applied to characterize structure, cation distribution and physical properties of undoped and Mn substituted triphylite and to evaluate the impurity phases formation.

36 MATERIALS SCIENCE↗

Ethylene Carbonate–Free Electrolytes for High–Nickel Layered Oxide Cathodes in Lithium–Ion Batteries

Layered lithium nickel oxide (LiNiO 2 ) can provide very high energy density among intercalation cathode materials for lithium-ion batteries, but suffers from poor cycle life and thermal-abuse tolerance with large lithium utilization. In addition to stabilization of the active cathode material, a concurrent development of electrolyte systems of better compatibility is critical to overcome these limitations for practical applications. Here, with nonaqueous electrolytes based on exclusively aprotic acyclic carbonates free of ethylene carbonate (EC), superior electrochemical and thermal characteristics are obtained with an ultrahigh-nickel cathode (LiNi 0.94 Co 0.06 O 2 ), capable of reaching a 235 mA h g –1 specific capacity. Pouch-type graphite | LiNi 0.94 Co 0.06 O 2 cells in EC-free electrolytes withstand several hundred charge–discharge cycles with minor degradation at both ambient and elevated temperatures. In thermal-abuse tests, the cathode at full charge, while reacting aggressively with EC-based electrolytes below 200 °C, shows suppressed self-heating without EC. Through 3D chemical and structural analyses, the intriguing impact of EC is visualized in aggravating unwanted surface parasitic reactions and irreversible bulk structural degradation of the cathode at high voltages. Finally, these results provide important insights in designing high-energy electrodes for long-lasting and reliable lithium-ion batteries.

25 ENERGY STORAGE↗

High Energy High Power Battery Exceeding PHEV40 Requirements

TIAX has developed long-life lithium-ion cells that can meet and exceed the energy and power targets (200Wh/kg and 800W/kg pulse power) set out by DOE for PHEV40 batteries. To achieve these targets, we selected and scaled-up a high capacity version of our proprietary high energy and high power CAM-7® cathode material. We paired the cathode with a blended anode containing Si-based anode material capable of delivering high capacity and long life. Furthermore, we optimized the anode blend composition, cathode and anode electrode design, and selected binder and electrolyte compositions to achieve not only the best performance, but also long life. By implementing CAM-7 with a Si-based blended anode, we built and tested prototype 18650 cells that delivered measured specific energy of 198Wh/kg total energy and 845W/kg at 10% SOC (projected to 220Wh/kg in state-of-the-art 18650 cell hardware and 250Wh/kg in 15Ah pouch cells). These program demonstration cells achieved 90% capacity retention after 500 cycles in on-going cycle life testing. Moreover, we also tested the baseline CAM-7/graphite system in 18650 cells showing that 70% capacity retention can be achieved after ~4000 cycles (20 months of on-going testing). Ultimately, by simultaneously meeting the PHEV40 power and energy targets and providing long life, we have developed a Li-ion battery system that is smaller, lighter, and less expensive than current state-of-the-art Li-ion batteries.

25 ENERGY STORAGE↗

Acid Etching‐Driven Self‐Assembly of Mn‐Shell Inducing Rock‐Salt Phase for Enhanced Single‐Crystal Ni‐Rich Cathodes

With the wide adoption of Li‐ion batteries, Ni‐rich cathode is considered as one of the most promising candidates of cathodes due to its high energy density and low cost. However, stability decreased with increasing Ni content in the Ni‐rich cathode. To solve this bottleneck, many strategies, such as coating, doping, surface modification, and special morphologies, have been developed. Herein, we introduce a groundbreaking approach for enhancing Ni‐rich cathode through an innovative acid etching process that promotes Mn shell self‐assembly, inducing a rock‐salt phase on the surface. This method not only simplifies the Ni‐rich cathode modification process, but also significantly improves the structural stability and electrochemical performance of Ni‐rich cathode. Our findings demonstrate that developed single‐crystal Ni‐rich cathode shows 3–34 % better stability compared to both commercial modified Ni‐rich cathode and unmodified counterparts. The unique Mn shell effectively mitigates reversible phase shifts during cycling, contributing to a remarkable enhancement in cycling stability. Additionally, this novel fabrication technique paves the way for cost‐effective production of high‐performance cathode materials, offering substantial benefits for lithium‐ion battery technology. And this study proves the potential of this method in advancing the design and development of durable, high‐capacity cathode materials for next‐generation batteries.

Ni-rich cathode↗

Investigating phase transformation in the Li1.2Co0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold (4.5 V) via magnetic, X-ray diffraction and electron microscopy studies

This study is the first that provides evidence of phase transformation in a Li-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode material for lithium-ion batteries (LIBs) during constant voltage charging. Diffraction and magnetic measurement techniques were successfully implemented to investigate the structural transformation in this cathode material during holding a half-cell at 4.5 V in a charged state. The results from X-ray diffraction showed a decrease in c-lattice parameters during high-voltage hold. Magnetic data revealed an increase in average effective magnetic moments of transition metal (TM) ions at constant voltage corresponding to a change in electronic states of TM ions. Analysis showed the reduction of Ni4+ to Ni2+, which was attributed to charge compensation due to oxygen loss. The appearance of the strong {100} forbidden reflection in the single-crystal selected area electron diffraction (SAED) data was attributed to migration of transition metal ions to the octahedral vacancy sites in the lithium layer during high-voltage hold, which was in agreement with the magnetization results. After prolonged hold at 4.5 V, high-resolution transmission electron microscopy (TEM) images along with SAED results showed the presence of spinel phases in the particles, indicating a layered to spinel like phase transformation at constant voltage in agreement with the magnetic data. The results obtained from these magnetic and diffraction studies furnish the fundamental understanding of the structural transformation pathways in Li-rich cathodes at constant voltage and will be instrumental for modifying the parent structure to achieve greater stability.

Mohanty, Debasish↗

Scalable synthesis of Na3V2(PO4)(3)/C porous hollow spheres as a cathode for Na-ion batteries

Na3V2(PO4)(3) (NVP) has been considered as a very promising cathode material for sodium-ion batteries (SIBs) due to its typical NASICON structure, which provides an open and three dimensional (3D) framework for Na+ migration. However, the low electronic conductivity of NVP limits its rate capability and cycling ability. In this study, carbon coated hollow structured NVP/C composites are synthesized via a template-free and scalable ultrasonic spray pyrolysis process, where the carbon coated NVP particles are uniformly decorated on the inner and outer surfaces of the porous hollow carbon spheres. When evaluated as a cathode material for SIBs, the unique NVP/C porous hollow sphere cathode delivers an initial discharge capacity of 99.2 mA h g(-1) and retains 89.3 mA h g(-1) after 300 charge/discharge cycles with a very low degradation rate of 0.035% per cycle. For comparison, the NVP/C composite, prepared by the traditional sol-gel method, delivers a lower initial discharge capacity of 97.4 mA h g(-1) and decreases significantly to 71.5 mA h g(-1) after 300 cycles. The superior electrochemical performance of NVP/C porous hollow spheres is attributed to their unique porous, hollow and spherical structures, as well as the carbon-coating layer, which provides a high contact area between electrode/electrolyte, high electronic conductivity, and high mechanical strength.

Mao, JF↗

Robust highly durable solid oxide fuel cell cathodes – Improved materials compatibility & self-regulating surface chemistry

Solid oxide fuel cells (SOFCs) are electrochemical conversion devices that directly transform hydrogen or hydrocarbon fuels to electricity, with energy efficiencies as high as 90%, coupled with reduced emissions. Several factors, however, remain to be addressed when considering scale-up of SOFC technology, including the need to overcome decreased performance due to sluggish rates of the oxygen reduction reaction (ORR) at the cathode under reduced temperatures and susceptibility to degradation in performance from surface poisoning e.g. from chromia, while limiting the use of critical raw materials (lanthanides and transition metals) present in high performing mixed ionic electronic conducting electrodes like (La,Sr)CoO 3 (LSC). In this project we explored the key descriptors for determining ORR activity in SOFC electrodes and tried to recover performance degradation by applying them to SOFC electrodes. In order to do this, we first selected a model mixed ionic electronic conducting (MIEC) oxide, Pr-doped CeO 2 (Pr 0.1 Ce 0.9 O 2-δ , PCO), which is a chemically stable fluorite and free of inherent poison sources (e.g. Sr segregation in LSC) that potentially react with external impurities such as Cr-species vaporized from the interconnect. The three approaches originally planned in this project are as follows: 1) evaluation of scavenger exsolution characteristics, 2) study of scavengers gettering efficacy following Cr and Si poisoning and 3) integration of new compositions into porous electrodes. Among them, exceptional progress has been made in 2) and 3), especially understanding the role of surface infiltrants in impacting electrode performance and degradation of PCO materials. We found that the Smith acidity scale for binary oxides serves as a powerful descriptor for tuning and predicting the oxygen exchange kinetics on MIEC PCO surfaces. As a result, with infiltration with binary oxides, ranging from strongly basic (Li 2 O) to strongly acidic (SiO 2 ) onto the surface of porous PCO, it was possible to systematically vary the chemical surface exchange coefficient (k chem ) by 6 orders of magnitude! L i2 O increased k chem by nearly 1,000 times over that of pristine PCO, while SiO 2 decreased k chem by nearly the same factor. Strikingly, although the pre-exponential of k chem scales linearly with the acidity of the infiltrated binary oxide, there is nearly no change in the activation energy. With this insight, we attributed the origin of these dramatic changes in k chem values to the systematic increase and decrease in the surface electron density induced by infiltrated binary oxides. More interestingly, although both Cr 2 O 3 and SiO 2 were determined to be acidic by Smith, suggesting that this feature could likely be the primary reason that these compounds serve to poison the ORR on SOFC cathodes, the effect of poisoning could be subsequently tuned by adding multiple infiltrants and controlling their relative surface acidities. We also systematically examined the effect of serial infiltration of basic and acidic oxides. It turned out that serial infiltration of Li not only recovers approximately 20-fold degraded k chem of PCO by acidic Cr 2 O 3 but its k chem is enhanced even beyond that of the non-infiltrated PCO by more than three orders of magnitude. This was further verified with a screen-printing PCO symmetric cell in terms of the electrode performance (area-specific resistance, ASR) related to approach 3). These observations point to acidity as a key descriptor not only in tuning and predicting the ORR activity of SOFC cathodes that largely determines the overall performance of SOFC, but in mitigating and reactivating poisoned electrode performance. This work provides novel guidelines for making the electrode performance much more active and robust in SOFCs, which can further be applied to all applications requiring oxygen exchange reaction, such as electrolyzers, permeation membranes and gas sensors.

30 DIRECT ENERGY CONVERSION↗