Results for “core processes” — Page 48

DOE OSTI2021

BETO 2021 Peer Review - Overview of the Chemical Catalysis for Bioenergy Consortium

Catalysis plays a central role in converting biomass and carbon-rich waste feedstocks into fuels and chemicals; however, critical catalysis challenges exist that are limiting commercialization of emerging bioenergy technologies. By leveraging unique U.S. Department of Energy National Laboratory capabilities and expertise, the Chemical Catalysis for Bioenergy consortium seeks to overcome these catalysis challenges and accelerate the catalyst and process development cycle. The foundation of the consortium consists of an integrated and collaborative portfolio of catalytic technologies and enabling capabilities, which positions ChemCatBio to address both technology-specific and overarching catalysis challenges across the development cycle from discovery to scale-up. The core catalysis projects target technological advancements for specific conversion processes, such as catalytic upgrading of biochemical process intermediates, catalytic fast pyrolysis, C1 and C2 upgrading, and electrochemical CO2 reduction, while the enabling technologies provide access to world-class capabilities and expertise in computational modeling, materials synthesis, advanced in situ and in operando catalyst characterization, and catalyst design tools.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

NASA NTRS1998

Simulated Bladed MMC Disk LCF Validation

The goal of this program was to evaluate the low cycle fatigue behavior of an SCS-6/Ti-6Al-4V sub-component under bi-axial loading conditions at 316 C(600 F). A simulated bladed TMC disk was designed having thirty four blades representing the number that would be used in Allied Signal's JTAGG II impeller. The outer diameter of the bladed ring was 254 mm (10.0 inch) and the inner diameter 114.3 mm (4.50 inch). The outer and inner diameter of the composite zone was 177.8 mm (7.00 inch) and 127.O mm(5.00 inch) respectively. Stress analysis showed that the fatigue life of the bladed composite ring would be about 12000 cycles for the test conditions applied. A modal analysis was conducted which showed that the blades would have sufficient life margin from dynamic excitation. The arbor design was the same as that employed in the spin-to burst test of NAS3-27027. A systematic stress analysis of each part making up the arbor was undertaken to assure the design would meet the low cycle fatigue requirements of the program. The Textron Systems grooved foil-fiber process was chosen to make the SCS-6/Ti-6Al-4V core ring based on the success they had in contract NAS3-27027. Fiber buckling, however, was observed at several locations in the first ring made which rendered it unsuitable for spin testing. The fiber buckling was attributed to cracking of the graphite tooling during the consolidation process. On this basis a second ring was made but it too contained fiber buckling defects. Analysis by Textron indicated that the fiber buckling was most likely due to poor placement of the SCS-6 fiber in the etched grooves of the Ti-6Al-4V foil. This was also a contributor to the defects in the first ring. Since there was little indication of control in the process to manufacture a quality ring a third attempt at making a ring was not undertaken.

Merrick, H. F.↗

NASA NTRS1999

Baselining the New GSFC Information Systems Center: The Foundation for Verifiable Software Process Improvement

This paper describes a study performed at the Information System Center (ISC) in NASA Goddard Space Flight Center. The ISC was set up in 1998 as a core competence center in information technology. The study aims at characterizing people, processes and products of the new center, to provide a basis for proposing improvement actions and comparing the center before and after these actions have been performed. The paper presents the ISC, goals and methods of the study, results and suggestions for improvement, through the branch-level portion of this baselining effort.

Parra, A.↗

NASA NTRS2010

The Global Precipitation Measurement (GPM) Project

The Global Precipitation Measurement (GP!v1) mission is an international cooperative effort to advance the understanding of the physics of the Earth's water and energy cycle. Accurate and timely knowledge of global precipitation is essential for understanding the weather/climate/ecological system, for improving our ability to manage freshwater resources, and for predicting high-impact natural hazard events including floods, droughts, extreme weather events, and landslides. The GPM Core Observatory will be a reference standard to uniformly calibrate data from a constellation of spacecraft with passive microwave sensors. GPM is being developed under a partnership between the United States (US) National Aeronautics and Space Administration (NASA) and the Japanese Aerospace and Exploration Agency (JAXA). NASA's Goddard Space Flight Center (GSFC), in Greenbelt, MD is developing the Core Observatory, two GPM Microwave Imager (GMI) instruments, Ground Validation System and Precipitation Processing System for the GPM mission. JAXA will provide a Dual-frequency Precipitation Radar (DPR) for installation on the Core satellite and launch services for the Core Observatory. The second GMI instrument will be flown on a partner-provided spacecraft. Other US agencies and international partners contribute to the GPM mission by providing precipitation measurements obtained from their own spacecraft and/or providing ground-based precipitation measurements to support ground validation activities. The Precipitation Processing System will provide standard data products for the mission.

Azarbarzin, Ardeshir↗

NASA NTRS1978

Research on lunar materials

Abstracts of 14 research reports relating to investigations of lunar samples are presented. The principal topics covered include: (1) optical properties of surface and core samples; (2) chemical composition of the surface layers of lunar grains: Auger electron spectroscopy of lunar soil and ground rock samples; (3) high frequency electrical properties of lunar soil and rock samples and their relevance for the interpretation of lunar radar observations; (4) the electrostatic dust transport process; (5) secondary electron emission characteristics of lunar soil samples and their relevance to the dust transportation process; (6) grain size distribution in surface soil and core samples; and (7) the optical and chemical effects of simulated solar wind (2keV proton and a particle radiation) on lunar material.

Gold, T.↗

DOE OSTI2020

Comparative modeling of the disregistry and Peierls stress for dissociated edge and screw dislocations in Al

Many elementary deformation processes in metals involve the motion of dislocations. The planes of glide and specific processes dislocations prefer depend heavily on their atomic core structures. Atomistic simulations are desirable for dislocation modeling but their application to even sub-micron scale problems is in general computationally costly. Accordingly, continuum-based approaches, such as the phase-field microelasticity, phase-field dislocation dynamics (PFDD), generalized Peierls–Nabarro (GPN) models, and the concurrent atomistic–continuum (CAC) method, have attracted increasing attention in the field of dislocation modeling because they well represent both short-range cores interactions and long-range stress fields of dislocations. To better understand their similarities and differences, it is useful to compare these methods in the context of benchmark simulations and predictions. In this paper, we apply the CAC method and different PFDD variants – one of them is equivalent to a GPN model – to simulate an extended (i.e., dissociated) dislocation in Al with initially pure edge or pure screw character in terms of the disregistry. CAC and discrete forms of PFDD are also employed to calculate the Peierls stress. By conducting comprehensive convergence studies, we quantify the dependence of these measures on time/grid resolution and simulation cell size. Several important but often overlooked differences between PFDD/GPN variants are clarified. In conclusion, our work sheds light on the advantages and limitations of each method, as well as the path towards enabling them to effectively model complex dislocation processes at larger length scales.

36 MATERIALS SCIENCE↗

NASA NTRS2003

Comparisons and Contrasts Between Mediterranean Flood-Producing Orographic Storms and Tropical Cyclones Modified by Complex Orography

Often, late-year, flood-producing storms in the Mediterranean Alps region arise from baroclinic disturbances developing on westerly longwaves, with the incipient storm circulations appearing well west of the flood zone. Regardless of the genesis locations and before the storms begin their flow interactions with the orography of the Mediterranean Alps, a process which can produce intense long-lived rainfall over the mountainous terrain of Italy and France, most of their moisture is drawn from warm Mediterranean waters while important elements of their thermodynamic structure are derived from airmass properties originating in north Africa and the Mediterranean basin itself. In fact, because of strong thermodynamic contrasts between the baroclinic zone producing the incipient disturbance and high potential temperature air from the south advecting into and wrapping around the storm center, a Mediterranean storm whose origins are from an evolving shortwave baroclinic perturbation, can become a quasi-warm core hybrid in term of its energetics composition, a process somewhat akin to the development of polar lows. This process begs the question of whether there are similarities between the autumn-winter season flood producing storms of the Mediterranean Alps and warm core tropical cyclones which become altered dynamically and thermodynamically by landfall over steep orographic terrain. This study investigates, from a comparison and contrast perspective, how the similarities and differences between the two types of storms manifest themselves over their respective life cycles. Before the orographically-induced precipitation-release stage in which both types of storm have evolved to the same hydrometeorlogical conclusion, the two storm categories are transforming from entirely distinctive origins, i.e., the classic eastward traveling, baroclinic mid-latitude cyclone forming in western Europe, and the classic eastward-traveling, warm core tropical cyclone developing in the western Pacific. The analyses use high resolution, nonhydrostatic model simulations, satellite data, and various types of ground data to conduct the study. The flood events of Piemonte- 2000 in northern Italy and Typhoon Rusa-2002 in South Korea are selected to focus the analysis on well documented meteorological events.

Smith, Eric A.↗

DOE OSTI2025

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Resonant Auger decay of dissociating CH 3 I near the I 4d threshold

Resonant Auger processes provide a unique perspective on electronic interactions and excited vibrational and electronic states of molecular ions. Here, new data are presented on the resonant Auger decay of excited CH 3 I in the region just below the I 4d -1 ionization threshold. The resonances include the Rydberg series converging to the five spin–orbit and ligand-field split CH 3 I (I 4d -1 ) thresholds, as well as resonances corresponding to excitation from the I 4d 5/2,3/2 orbitals into the σ* lowest unoccupied molecular orbital. This study focuses on participator decay that populates the lowest lying states of CH 3 I + , in particular, the X̃ 2 E 3/2 and 2 E 1/2 states, and on spectator decay that populates the lowest-lying (CH 3 I 2+ )σ* states of CH 3 I + . The CH 3 I (I 4d -1 )σ* resonances are broad, and dissociation to CH 3 + I competes with the autoionization of the core-excited states. Auger decay as the molecule dissociates produces a photoelectron spectrum with a long progression (up to v 3 + ~ 25) in the C–I stretching mode of the X̃ 2 E 3/2 and 2 E 1/2 states, providing insights into the shape of the dissociative core-excited surface. Further, the observed spectator decay processes indicate that CH 3 I + is formed on the repulsive wall of the lower-lying (CH 3 I 2+ )σ* potentials, and the photon-energy dependence of the processes provides insights into the relative slopes of the (4d -1 )σ* and (CH 3 I 2+ )σ* potential surfaces. Data are also presented for the spectator decay of higher lying CH 3 I (I 4d -1 )nl Rydberg resonances. Photoelectron angular distributions for the resonant Auger processes provide additional information that helps distinguish these processes from the direct ionization signal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRSDate not supplied

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses the gap Medical-701 within the Inflight Medical Conditions risk: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant. The aim of the CDS project is to develop and provide recommended requirements for an in-vehicle CDSS that acts as an assistant for delivering optimal health and performance and medical care during exploration missions. The CDSS is envisioned as a software-based tool that will augment a crewmembers’ knowledge, skills and abilities to assist in decision-making and crew health and performance (CHP) management thus increasing CHP systems capabilities. The human interface will be context aware and lessen the cognitive load to assimilate and use information as well as combine large disparate data sets in such a manner that provides the crew with actionable insight to decisions related to crew medical, health and performance management. Crew autonomy will be provided through a CDS that presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. The CDS project addresses the need for crew members to operate independently during long duration space exploration missions that require medical Levels of Care (LoC) V, the highest level specified by NASA-STD-3001 and described in more detail by the ExMC interpretation of LoC document (NASA/TM-2017-219290), where significant changes to in-flight and habitat medical care necessitate increasing crew autonomy in decision making and task performance. The CDS project will develop and test a series of iterative and increasingly more complex system prototypes. These annual demonstrations of the data system integration with the crew health and performance domain will inform exploration medical system requirements for an on-board Clinical Decision Support System (CDSS) through a series of use cases that guide CDS prototype functionality. CDS concepts are based on ExMC Concept of Operations documents (presented separately) and will highlight architecture extensibility to other more complex analyses and tests using core crew health and performance integrated data management, processing and visualization capabilities. This approach also establishes how externally developed analyses and approaches could be added to expand a clinical decision support system and thus highlight how a comprehensive system can be commercially and/or globally developed. The CDS project will build upon the concept of an integrated data management approach based on the Medical Data Architecture (MDA) project to more fully address challenges associated with in-flight and habitat medical, health and performance care due to constraints on mass, volume, power, crew time and medical evacuation capabilities required for medical LoC V. These requirements will be derived through systems engineering approaches and software prototype developments over the course of the multi-year CDS project to address crew health and performance decision-making and task performance, often autonomously executed by the crew, in a manner that is consistent with the appropriate medical level of care for the mission. This presentation will provide an overview of the vision for the CDS project and highlight the initial accomplishments in project planning, implementation and requirements identification in fiscal year 2020.

clinical decision support↗

NASA NTRSDate not supplied

Clinical Decision Support - Overview and Update

We are entering a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses the gap Medical-701 within the Inflight Medical Conditions risk: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant. The aim of the CDS project is to develop and provide recommended requirements for an in-vehicle CDSS that acts as an assistant for delivering optimal health and performance and medical care during exploration missions. The CDSS is envisioned as a software-based tool that will augment a crewmembers’ knowledge, skills and abilities to assist in decision-making and crew health and performance (CHP) management thus increasing CHP systems capabilities. The human interface will be context aware and lessen the cognitive load to assimilate and use information as well as combine large disparate data sets in such a manner that provides the crew with actionable insight to decisions related to crew medical, health and performance management. Crew autonomy will be provided through a CDS that presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. The CDS project addresses the need for crew members to operate independently during long duration space exploration missions that require medical Levels of Care (LoC) V, the highest level specified by NASA-STD-3001 and described in more detail by the ExMC interpretation of LoC document (NASA/TM-2017-219290), where significant changes to in-flight and habitat medical care necessitate increasing crew autonomy in decision making and task performance. The CDS project will develop and test a series of iterative and increasingly more complex system prototypes. These annual demonstrations of the data system integration with the crew health and performance domain will inform exploration medical system requirements for an on-board Clinical Decision Support System (CDSS) through a series of use cases that guide CDS prototype functionality. CDS concepts are based on ExMC Concept of Operations documents (presented separately) and will highlight architecture extensibility to other more complex analyses and tests using core crew health and performance integrated data management, processing and visualization capabilities. This approach also establishes how externally developed analyses and approaches could be added to expand a clinical decision support system and thus highlight how a comprehensive system can be commercially and/or globally developed. The CDS project will build upon the concept of an integrated data management approach based on the Medical Data Architecture (MDA) project to more fully address challenges associated with in-flight and habitat medical, health and performance care due to constraints on mass, volume, power, crew time and medical evacuation capabilities required for medical LoC V. These requirements will be derived through systems engineering approaches and software prototype developments over the course of the multi-year CDS project to address crew health and performance decision-making and task performance, often autonomously executed by the crew, in a manner that is consistent with the appropriate medical level of care for the mission. This presentation will provide an overview of the vision for the CDS project and highlight the initial accomplishments in project planning, implementation and requirements identification in fiscal year 2020.

clinical decision support system↗

DOE OSTI2019

The Origin of Chemical Elements: Connecting Laboratory Nuclear Astrophysics with Astronomical Observations through Nucleosynthesis Modeling

Nuclear astrophysics is a field at the frontier of nuclear science which continues to enjoy significant progress and exciting prospects for the future. It addresses the fundamental question of where and how the chemical elements are made. Except for hydrogen and helium, all other chemical elements are made either in stars or in cosmic explosions such as supernovae or neutron star mergers. To understand the formation of elements we need to understand the relevant nuclear physics processes that govern the interaction between nuclei. We need to understand the conditions in the star or the explosion under which these nuclear processes take place. And we need to understand how individual events of element formation contribute to the overall chemical enrichment of our Galaxy over time. Experimental facilities allow for terrestrial experiments on the nuclear physics governing the element synthesis. Earth-based and space-based telescopes probe the Galaxy around us and provide information about the conditions in stars and supernovae, and about the chemical element enrichment of these different environments. Numerical simulations of stars, supernovae, and other astrophysical phenomena allow us to probe the conditions of extreme densities and temperatures required for element synthesis. Nucleosynthesis research is ideally posed to integrate advances from all three of these areas and advance our understanding of how and where elements are made. Nucleosynthesis research provides theory support for experiments and observations. And it makes predictions that can be tested in nuclear physics experiments and astronomical observations. The goals of this award were in three main areas: 1. Develop and implement an effective core-collapse supernova model that is computationally efficient and that captures the relevant physics for the scientific questions of interest 2. Advance our understanding of the synthesis of the lightest heavy elements 3. Increase the realism of supernova nucleosynthesis and determine its dependence on the properties of the exploding star As the projects progressed, an additional focus was added to this list: 1. Study the explosion properties and the signals from the most massive stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Braiding of Majorana zero modes in vortex cores

Here, we demonstrate the successful simulation of $\sqrt{𝑍-}$, $\sqrt{𝑋-}$, and 𝑋-quantum gates using Majorana zero modes (MZMs) that emerge in magnetic vortices located in topological superconductors. We compute the transition probabilities and geometric phase differences accounting for the full many-body dynamics and show that qubit states can be read out by fusing the vortex core MZMs and measuring the resulting charge density. We visualize the gate processes using the time- and energy-dependent nonequilibrium local density of states. Our results demonstrate the feasibility of employing vortex core MZMs for the realization of fault-tolerant topological quantum computing.

Majorana bound states↗

NASA NTRS1977

The influence of autoionization accompanied by excitation on the dielectronic recombination and the ionization equilibrium of silicon ions

The dielectronic recombination rate coefficients have been calculated for the various ionization stages of silicon. Account has been taken of all stabilizing radiative transitions and all autoionization processes which involve a single-electron electric-dipole transition of the recombining ion core. For certain ions the dielectronic recombination rates, although still larger than the direct radiative recombination rates, are found to be substantially reduced when account is taken of the effects of a previously neglected autoionization process in which the excited recombining ion core undergoes a delta n = 0 transition to a lower excited state. The temperatures at which these ions have their maximum abundance in corona equilibrium are significantly reduced when use is made of the new dielectronic recombination rates. Calculations are also presented for the total rates of radiative energy loss from isothermal steady-state plasmas due to the line and continuum emission of silicon ions.

Jacobs, V. L.↗

DOE OSTI2021

White Rabbit Time Synchronization for Radiation Detector Readout Electronics

As radiation detector arrays in nuclear physics applications become larger and physically more separated, the time synchronization and trigger distribution between many channels of detector readout electronics become more challenging. Clocks and triggers are traditionally distributed through dedicated cabling, but newer methods such as the IEEE 1588 Precision Time Protocol and White Rabbit allow clock synchronization through the exchange of timing messages over Ethernet. Consequently, we report here the use of White Rabbit in a new detector readout module, the Pixie-Net XL. Herein, the White Rabbit core, data capture from multiple digitizing channels, and subsequent pulse processing for pulse height and constant fraction timing are implemented in a Kintex 7 FPGA. The detector data records include White Rabbit time stamps and are transmitted to storage through the White Rabbit core's gigabit Ethernet data path or a slower diagnostic/control link using an embedded Zynq processor. The performance is characterized by time-of-flight style measurements and by time correlation of high energy background events from cosmic showers in detectors separated by longer distances. Software for the Zynq processor can implement "software triggering", for example to limit recording of data to events where a minimum number of channels from multiple modules detect radiation at the same time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Electron energy loss spectroscopy database synthesis and automation of core-loss edge recognition by deep-learning neural networks

Abstract The ionization edges encoded in the electron energy loss spectroscopy (EELS) spectra enable advanced material analysis including composition analyses and elemental quantifications. The development of the parallel EELS instrument and fast, sensitive detectors have greatly improved the acquisition speed of EELS spectra. However, the traditional way of core-loss edge recognition is experience based and human labor dependent, which limits the processing speed. So far, the low signal–noise ratio and the low jump ratio of the core-loss edges on the raw EELS spectra have been challenging for the automation of edge recognition. In this work, a convolutional-bidirectional long short-term memory neural network (CNN-BiLSTM) is proposed to automate the detection and elemental identification of core-loss edges from raw spectra. An EELS spectral database is synthesized by using our forward model to assist in the training and validation of the neural network. To make the synthesized spectra resemble the real spectra, we collected a large library of experimentally acquired EELS core edges. In synthesize the training library, the edges are modeled by fitting the multi-Gaussian model to the real edges from experiments, and the noise and instrumental imperfectness are simulated and added. The well-trained CNN-BiLSTM network is tested against both the simulated spectra and real spectra collected from experiments. The high accuracy of the network, 94.9%, proves that, without complicated preprocessing of the raw spectra, the proposed CNN-BiLSTM network achieves the automation of core-loss edge recognition for EELS spectra with high accuracy.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Neutron-capture Element Abundances of 491 Stars in Milky Way Dwarf Satellite Galaxies from Medium-resolution Spectra

The chemical compositions of evolved stars in Local Group dwarf spheroidal galaxies (dSphs) provide insight into the galaxy’s past star formation and nucleosynthesis. Neutron-capture element abundances are especially interesting. In particular, s-process elements can provide a third chemical clock for resolving star formation histories in addition to core-collapse and Type Ia supernovae. Likewise, the primary sites of the r-process are still areas of extensive research. Until now, the number of stars with neutron-capture element abundances in dSphs has been limited by the need for stars bright enough for high-resolution spectroscopy. We present abundance measurements of the neutron-capture elements Sr, Y, Ba, and Eu with errors <0.4 dex—as well as new measurements of Mg—in 491 stars in Sculptor, Fornax, Draco, Sextans, and Ursa Minor. The large number of stars in our sample is possible because we used medium-resolution spectra from the DEIMOS spectrograph, assembling the largest homogeneous set of neutron-capture abundances in dSphs to date. By utilizing the abundances of both s- and r-process elements, we find evidence of an s-process contribution at early times in Sculptor from our measurements of [Ba/Fe]. This is a potential signature of s-process nucleosynthesis in fast-rotating massive stars. By comparing our measurements of [Eu/Fe] with [Mg/Fe], we show the need for an r-process source that has a short delay time to enrich stars in the dSphs. Thus, neutron star mergers are likely not the sole source of r-process material in dSphs.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2009

The Radio Frequency Health Node Wireless Sensor System

The Radio Frequency Health Node (RFHN) wireless sensor system differs from other wireless sensor systems in ways originally intended to enhance utility as an instrumentation system for a spacecraft. The RFHN can also be adapted to use in terrestrial applications in which there are requirements for operational flexibility and integrability into higher-level instrumentation and data acquisition systems. As shown in the figure, the heart of the system is the RFHN, which is a unit that passes commands and data between (1) one or more commercially available wireless sensor units (optionally, also including wired sensor units) and (2) command and data interfaces with a local control computer that may be part of the spacecraft or other engineering system in which the wireless sensor system is installed. In turn, the local control computer can be in radio or wire communication with a remote control computer that may be part of a higher-level system. The remote control computer, acting via the local control computer and the RFHN, cannot only monitor readout data from the sensor units but can also remotely configure (program or reprogram) the RFHN and the sensor units during operation. In a spacecraft application, the RFHN and the sensor units can also be configured more nearly directly, prior to launch, via a serial interface that includes an umbilical cable between the spacecraft and ground support equipment. In either case, the RFHN wireless sensor system has the flexibility to be configured, as required, with different numbers and types of sensors for different applications. The RFHN can be used to effect realtime transfer of data from, and commands to, the wireless sensor units. It can also store data for later retrieval by an external computer. The RFHN communicates with the wireless sensor units via a radio transceiver module. The modular design of the RFHN makes it possible to add radio transceiver modules as needed to accommodate additional sets of wireless sensor units. The RFHN includes a core module that performs generic computer functions, including management of power and input, output, processing, and storage of data. In a typical application, the processing capabilities in the RFHN are utilized to perform preprocessing, trending, and fusion of sensor data. The core module also serves as the unit through which the remote control computer configures the sensor units and the rest of the RFHN.

Valencia, J. Emilio↗