Search NASA⌕ Search

SEARCH · Search NASA

Results for “IONIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Phase Transition and Thermal Decomposition of Silver Isocyanate (AgNCO)

The thermal behavior of AgNCO (silver isocyanate) has been studied via thermal analysis, optical spectroscopy, X-ray powder diffraction and transmission electron microscopy. Upon quenching the high temperature polymorph (HT-AgNCO) to room temperature, a new modification has been obtained (q-AgNCO). Its crystal structure was solved from X-ray powder diffraction data and refined by the Rietveld method (Pmmn (no. 59), a = 3.579(3) A, b = 5.777(4) A, c = 5.807(2) A, V = 120.08(3) A3, Z = 2, T = 295 K). The structure consists of chains of Ag+ ions bridged by isocyanate units. HT-AgNCO exists between T = 135 C and the melting/decomposition point and exhibits virtually free rotation of the complex anions. According to preliminary single-crystal studies, HT-AgNCO (C2/m, a = 5.87 A, b = 3.51 A, c = 5.81 A, B = 105.953 degrees, Z = 2, T = 373 K) is structurally related to ?-NaN3. The crystal structures of both, HT-AgNCO and q-AgNCO have been compared with that of the room temperature modification (RT-AgNCO). The thermal behavior and the ionic conductivity of AgNCO are discussed with respect to the related compounds AgN3 and KSCN. Decomposition of AgNCO proceeds in distinct steps, as seen from TGA, and results in the formation of nanoparticles of elemental silver and an amorphous polymer consisting of C, N and O, only.

36 MATERIALS SCIENCE↗

Influence of Magnetite Nanoparticles on the Dielectric Properties of Metal Oxide/Polymer Nanocomposites Based on Polypropylene

Structure and dielectric properties of polymer nanocomposites based on isotactic polypropylene and iron oxide (Fe{sub 3}O{sub 4}) nanoparticles are studied. Distribution of magnetite nanoparticles in a polymer matrix was studied by scanning electron microscopy (SEM, Carl Zeiss). Dielectric properties of nanocomposites were examined by means of E7-21 impedance spectrometer in the frequency range of 10{sup 2}–10{sup 6} Hz and temperature interval of 298–433 K. The frequency and temperature dependences of the dielectric permittivity ε, as well as the temperature dependence of log (ρ) were constructed. It is shown that introduction of the magnetite (Fe{sub 3}O{sub 4}) nanoparticles into a polypropylene matrix increases the dielectric permittivity of nanocomposites. An increase in the dielectric permittivity is explained by the increase in the polarization ability of nanocomposites. It is found that a decrease in the specific resistance with increasing temperature up to 318 K is associated with an increase in the ionic conductivity of nanocomposites. An increase in the resistance at temperatures higher than 358 K is due to the destruction of the crystalline phase of the polymer, as a result of which the distance between the Fe{sub 3}O{sub 4} nanoparticles increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of reduced precursor and solvolytic reagent molar ratio on preparation and properties of ionogel

In the present study, ionogels have been synthesized by immobilizing IL (1-ethyl-3-methylimidazolium tetrafluoroborate) in silica gel matrices using non-aqueous route. In this process, tetraethyl orho-silane (TEOS) as a precursor to silicon dioxide and formic acid as a solvolytic gelating reagent in reduced molar ratio 1:4 were used. We find that reduced molar concentration of formic acid results the formation of ionogels having less number of closed pores (totally isolated from their neighbours), larger density and stable monolithic form. TEM and SEM measurements are used to visualize the morphology of sample and closed pores present in the sample. N{sub 2}-sorption measurement is used to measure the pore parameters of the silica matrices which shows the mesoporous structure. DSC and TGA results show the change in phase transition temperature and thermal stability of IL upon confinement in silica matrices. Moreover, ionic conductivity of bulk and confined IL is measured using impedance spectroscopy and it has been found that it increases with increasing the temperature as well as concentration of IL in ionogels. Apart from these characterization techniques, ionogels have been characterized using FTIR and fluorescence spectroscopy which exhibit the change in vibrational frequencies and fluorescence behaviour of confined IL. - Highlights: • Synthesis of stable ionogel using non-hydrolytic route with reduced precursor and solvolytic reagent molar ratio. • Ionogels are free from entrapped residual reaction product. • The ionogels synthesized with higher amount of ionic liquids show bulk liquid like electrical behaviour.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic ASi{sub 2}N{sub 3} (A=Li, Na, K and Rb) stabilized by the covalent Si–N bonding: First-principles calculations

The structural, elastic and electronic properties of LiSi{sub 2}N{sub 3} and its substitutions by Na, K and Rb were investigated through first-principles computations. The expansion of lattice parameters of ASi{sub 2}N{sub 3} from Li, Na, K to Rb is found to be determined by the bond angle of Si–N1–Si, which suggests a possible way to improve the lithium ionic conductivity by substitutions. ASi{sub 2}N{sub 3} (A=Li, Na, K and Rb) shows the similar elastic behaviors, while the electronic band gap gradually decreases from 5.1 to 3.4 eV from LiSi{sub 2}N{sub 3} to RbSi{sub 2}N{sub 3}. Interestingly, the analysis of electronic structure, crystal orbital Hamiltonian populations and Bader charges shows that the covalence of Si–N bonding is critical for the stability of ASi{sub 2}N{sub 3} phase. Among ASi{sub 2}N{sub 3} phases, there is a relatively high ionicity in NaSi{sub 2}N{sub 3}; the Si–N bond strength in [Si{sub 2}N{sub 3}]{sup −} net for KSi{sub 2}N{sub 3} and RbSi{sub 2}N{sub 3} is comparable to LiSi{sub 2}N{sub 3}, but stronger than NaSi{sub 2}N{sub 3}. - Graphic abstract: Universal trend of structural and electronic properties in alkaline metal silicon nitrides, ASi{sub 2}N{sub 3}, A=Li, Na, K and Rb. - Highlights: • Trend in structure, electronic and mechanical properties of ASi{sub 2}N{sub 3} (A=Li-Rb) were predicted. • Lattice expansion of ASi{sub 2}N{sub 3} induced by the bond angle of Si–N1–Si was found. • Calculated band gap decreases from 5.1 to 3.4 eV from LiSi{sub 2}N{sub 3} to RbSi{sub 2}N{sub 3}. • Covalent Si–N bonding is critical for the stability of ASi{sub 2}N{sub 3}.

36 MATERIALS SCIENCE↗

Humidity Effect on Nanoscale Electrochemistry in Solid Silver Ion Conductors and the Dual Nature of Its Locality

Scanning probe microscopy (SPM) is a powerful tool to investigate electrochemistry in nanoscale volumes. While most SPM-based studies have focused on reactions at the tip-surface junction, charge and mass conservation requires coupled and intrinsically non-local cathodic and anodic processes that can be significantly affected by ambient humidity. Here, we explore the role of water in both cathodic and anodic processes, associated charge transport, and topographic volume changes depending on the polarity of tip bias. The first-order reversal curve current-voltage technique combined with simultaneous detection of the sample topography, referred to as FORC-IVz, was applied to a silver solid ion conductor. We found that the protons generated from water affect silver ionic conduction, silver particle formation and dissolution, and mechanical integrity of the material. This work highlights the dual nature (simultaneously local and non-local) of electrochemical SPM studies, which should be considered for comprehensive understanding of nanoscale electrochemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Optimization of non-aqueous electrolytes for Primary lithium/air batteries operated in Ambient Enviroment

The selection and optimization of non-aqueous electrolytes for ambient operations of lithium/air batteries has been studied. Organic solvents with low volatility and low moisture absorption are necessary to minimize the change of electrolyte compositions and the reaction between lithium anode and water during discharge process. It is critical to make the electrolytes with high polarity so that it can reduce wetting and flooding of carbon based air electrode and lead to improved battery performance. For ambient operations, the viscosity, ionic conductivity, and oxygen solubility of the electrolyte are less important than the polarity of organic solvents once the electrolyte has reasonable viscosity, conductivity, and oxygen solubility. It has been found that PC/EC mixture is the best solvent system and LiTFSI is the most feasible salt for ambient operations of Li/air batteries. Battery performance is not very sensitive to PC/EC ratio or salt concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospun montmorillonite modified poly(vinylidene fluoride) nanocomposite separators for lithium-ion batteries

Highlights: • Composite separators of PVDF and MMT for lithium-ion batteries were electrospun. • Thermal dimensional stability and tensile property of composite separators get improved. • Presence of montmorillonite promotes electrical properties of PVDF fibrous separators. • Batteries consisting of PVDF/MMT-5% separator achieve the best performance. - Abstract: Composite separators of poly(vinylidene fluoride) (PVDF) with different contents of montmorillonite (MMT) for Li-ion batteries have been fabricated by electrospinning. The morphology, function group, crystallinity, and mechanical properties of membranes were investigated by scanning electron microscope (SEM), Fourier Transform infrared spectra (FT-IR), differential scanning calorimetry (DSC), and tensile test, respectively. Interlayer spacing of MMT in polymer was characterized by X-ray diffraction (XRD). In addition, the results of electrochemical measurements suggest that PVDF/MMT-5% composite membrane has maximum ionic conductivity of 4.2 mS cm{sup −1}, minimum interfacial resistance of 97 Ω, and excellent electrochemical stability. The cell comprising PVDF/MMT-5% composite membrane shows higher capacity and more stable cycle performance than the one using commercial Celgard PP membrane.

36 MATERIALS SCIENCE↗

Structure and lithium ion conductivity of garnet-like Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} and Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12}

Oxides with the nominal chemical compositions Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} and Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12} were prepared by solid-state reaction. The structures were refined by the Rietveld method using powder X-ray diffraction data. The synthesis of Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} resulted in the well known garnet-related structure plus 5 wt.% of La{sub 2}LiSbO{sub 6} in the bulk. In contrast to that, Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12} could be synthesised in single garnet-related type phase. Lithium ion conductivities of Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} and Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12} were studied by the ac impedance method. The grain-boundary contribution to the total (bulk + grain-boundary) resistance is very small and about 5 and 3% for Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} and Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12}, respectively, at 24 deg. C and decreases further with increase in temperature. Among the investigated compounds, Li{sub 5}La{sub 3}Sb{sub 2}O{sub 12} exhibits the highest total (bulk + grain-boundary) and bulk ionic conductivity of 7.8 x 10{sup -6} and 8.2 x 10{sup -6} S cm{sup -1}, respectively, at 24 deg. C. The structural data indicate that the coupled substitution Li + Sr {yields} La leads to a closure of the bottle neck like O-O distances of the shared edges of neighbouring Li octahedra and therefore reduces the mobility of Li ions in Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12}. Scanning electron microscope (SEM) images of the Li{sub 6}SrLa{sub 2}Sb{sub 2}O{sub 12} compound revealed well crystallised large homogeneous grains ({approx}4.8 {mu}m) and the grains were in good contact with the neighbouring grain, which leads to a smaller grain-boundary contribution to the total resistance.

36 MATERIALS SCIENCE↗

Crystal Structures, Local Atomic Environments, and Ion Diffusion Mechanisms of Scandium-Substituted Sodium Superionic Conductor (NASICON) Solid Electrolytes

The importance of exploring new solid electrolytes for all-solid-state batteries has led to significant interest in NASICON-type materials. In this work, the Sc 3+ -substituted NASICON compositions Na 3 Sc x Zr 2– x (SiO 4 ) 2- x (PO 4 ) 1+ x (termed N3) and Na 2 Sc y Zr 2- y (SiO 4 ) 1- y (PO 4 ) 2+ y (termed N2) ( x , y = 0–1) are studied as model Na + -ion conducting electrolytes for solid-state batteries. The influence of Sc 3+ substitution on the crystal structures and local atomic environments has been characterized by powder X-ray diffraction (XRD) and neutron powder diffraction (NPD), as well as solid-state 23 Na, 31 P, and 29 Si nuclear magnetic resonance (NMR) spectroscopy. A phase transition between 295 and 473 K from monoclinic C 2/ c to rhombohedral $R\bar{3}c$ is observed for the N3 compositions, while N2 compositions crystallize in a rhombohedral $R\bar{3}c$ unit cell in this temperature range. Alternating current (AC) impedance spectroscopy, molecular dynamics (MD), and high temperature 23 Na NMR studies are in good agreement, showing that, with a higher Sc 3+ concentration, the ionic conductivity (of about 10 -4 S/cm at 473 K) decreases and the activation energy for ion diffusion increases. 23 Na NMR experiments indicate that the nature of the Na + -ion motion is two-dimensional on the local atomic scale of NMR although the long-range diffusion pathways are three-dimensional. In addition, a combination of MD, bond valence, maximum entropy/Rietveld, and van Hove correlation methods has been used to reveal that the Na + -ion diffusion in these NASICON materials is three-dimensional and that there is a continuous exchange of sodium ions between Na(1) and Na(2) sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational simulation of asymmetric phase transformation in cracked Li₇La₃Zr₂O₁₂: Variant selection and chemo-mechanical implications

Coupling between microcracks and phase transformation in ion-conducting ceramics can jointly affect mechanical responses and ion transport. In this work we investigate the cubic-to-tetragonal phase transformation in Li₇La₃Zr₂O₁₂ in the presence of a microcrack under hydrostatic loading and quantify its implications for crack-tip stress concentration and Li-ion transport using phase-field and molecular dynamics simulations. The phase transformation exhibits a strong asymmetry between hydrostatic tension and compression. Under tension, the crack edge nucleates one tetragonal variant that amplifies the crack-tip stress intensity and promotes crack opening. Under compression, the crack tip nucleates a different tetragonal variant that enhances the stress-induced crack-closure tendency. Effective Li diffusivity analysis shows faster transport degradation under compression due to accelerated transformation kinetics, exposing a trade-off between mechanical stability and ionic conductivity. These results highlight the intertwined nature of cracking, phase transformation, and ionic transport in ion-conducting oxides and provide mechanistic insights into chemo-mechanical degradation of solid electrolytes.

36 MATERIALS SCIENCE↗

Structural and electrochemical properties of PEMA with the influence of MWCNT / TiO{sub 2} filler

An attempt has been made to prepare a hybrid Nano composite polymer electrolytes (NCPES) based on Poly(ethyl methacrylate) (PEMA) doped with multiwalled carbon nanotubes (MWCNT) and Titanium oxide (TiO{sub 2}) as additives, Lithium per chlorate (LiClO{sub 4}) as ionic salt and Propylene Carbonate as plasticizer (PC) by using solvent casting technique. X-ray diffraction analysis (XRD) confirms the miscibility and amorphous nature of the prepared electrolytes. It has been found from the a.c impedance analysis that the inorganic filler reduces the bulk resistance of the electrolytes and thus ionic conductivity enhanced. A high dielectric loss value is observed for the case of doped MWCNT-PEMA in comparison with pure PEMA and doped TiO{sub 2} –PEMA membranes. Based on the study of relaxation spectra, it is found that the relaxation time decreases with increase in temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aberration-corrected scanning transmission electron microscopy: from atomic imaging and analysis to solving energy problems

The new possibilities of aberration-corrected scanning transmission electron microscopy (STEM) extend far beyond the factor of 2 or more in lateral resolution that was the original motivation. The smaller probe also gives enhanced single atom sensitivity, both for imaging and for spectroscopy, enabling light elements to be detected in a Z-contrast image and giving much improved phase contrast imaging using the bright field detector with pixel-by-pixel correlation with the Z-contrast image. Furthermore, the increased probe-forming aperture brings significant depth sensitivity and the possibility of optical sectioning to extract information in three dimensions. This paper reviews these recent advances with reference to several applications of relevance to energy, the origin of the low-temperature catalytic activity of nanophase Au, the nucleation and growth of semiconducting nanowires, and the origin of the eight orders of magnitude increased ionic conductivity in oxide superlattices. Possible future directions of aberration-corrected STEM for solving energy problems are outlined.

47 OTHER INSTRUMENTATION↗

Effect of Na substitution for La on Li ion conductivity of Li5La3Nb2O12 garnets by sol–gel process

Highlights: • The effect of Na substitution for La on Li ion conductivity in the Li5La3Nb2O12 solid state electrolyte is reported. • The power XRD patterns reveal that the partial substitutions of Na for La in Li{sub 5+2x}La{sub 3-x}Na{sub x}Nb{sub 2}O{sub 12} electrolytes are isostructural. • The new solid state electrolyte is very stable in potential range of −0.8 to 5.0V vs. Li/Li+. - Abstract: In this paper, the effect of Na substitution for La on Li ion conductivity in the well-known Li{sub 5}La{sub 3}Nb{sub 2}O{sub 12} parents with the cubic garnet framework prepared by sol-gel process is reported. The optimum condition is at 750 °C for 6 h in air with 10% excess lithium salt. The power XRD patterns reveal that the partial substitutions of Na for La in Li5 + 2{sub x}La{sub 3-x}Na{sub x}Nb{sub 2}O{sub 12} electrolytes are isostructural. The cubic lattice parameters decrease as the molar fractions of Na increasing. Among the Li5 + 2{sub x}La{sub 3-x}Na{sub x}Nb{sub 2}O{sub 12} compounds investigated, the Na-substituted Li{sub 6.4}La{sub 2.3}Na{sub 0.7}Nb{sub 2}O{sub 12} exhibits the highest ionic conductivity of 1.6 × 10{sup −4} S cm{sup -1} at room temperature with an activation energy of 0.41 eV. The new solid state electrolyte is very stable in potential range of −0.8 to 5.0 V vs. Li/Li{sup +}, and is also chemically stable against LiMn{sub 2}O{sub 4} and LiCoO{sub 2} compounds up to 900 °C, indicating that Li{sub 6.4}La{sub 2.3}Na{sub 0.7}Nb{sub 2}O{sub 12} is a promising solid state electrolyte for all-solid-state battery application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning Transport via Interaction Strength in Cationic Conjugated Polyelectrolytes

Tuning polymer-ion interaction strength is critical for balancing ion solvation and transport in solid polymer electrolytes for battery applications. In mixed Li + /electron conducting systems for improved battery binders, the design space is further complicated by seemingly opposing design rules for electron and ion conducting polymers. Conjugated polymers functionalized with cationic side chains have demonstrated high ionic conductivity, lithium transport, and electronic conductivity by combining long-range polymer ordering with diffuse ion interactions. Herein, we demonstrate a family of mixed conducting polythiophenes functionalized with a range of cationic side chains, namely imidazolium, trimethylammonium, and ammonium groups. The strength of ionic interactions and structure of the side chains govern lithium-selective transport, resulting in high Li + conductivity (~10 –4 S/cm at 80 °C) and electronic conductivity. The more diffuse imidazolium ion affords labile ionic interactions, resulting in higher lithium transference than the other cations studied. Electronic conductivity is also higher in the imidazolium system, stemming from the ability of the planar side chains to stack while also accommodating the bulky TFSI – counterions. Finally, these results demonstrate the importance of interaction strength in ion transport while also indicating that the physical structure of the side chain has an impact on electronic conduction. The imidazolium group strikes a balance, achieving superior properties across all metrics.

36 MATERIALS SCIENCE↗

Polymorphism in PbBiOXO{sub 4} compounds (X=V, P, As): Part II-PbBiOPO{sub 4} and PbBiOAsO{sub 4} structures and characterization of related solid solutions

Reinvestigation of PbBiOXO{sub 4} (X=V, P, As) thermal behaviour revealed a phase transition for V- and P-compounds, but no transition for the As-compound. As shown by single-crystal X-ray diffraction and high-resolution neutron powder diffraction, {alpha}-PbBiOVO{sub 4} transforms to {beta}-PbBiOVO{sub 4} at 550 deg. C. The two PbBiOPO{sub 4} varieties are isomorph to the vanadate forms, while PbBiOAsO{sub 4} adopts the {beta}-type structure whatever the temperature. PbBiP{sub 1-x}OAs{sub x}O{sub 4} and PbBiV{sub 1-x}OM{sub x}O{sub 4} (M=As, P, Cr, Mn) solid solutions display both triclinic and monoclinic domains, and the {alpha}{yields}{beta} transition temperature is a function of the substitution rate. The ionic conductivity of these compounds was investigated by impedance spectroscopy. The analysis of free space in the {beta}-PbBiOVO{sub 4} structure allows to propose a one-dimensional oxygen diffusion pathway along [010] when the temperature increases. - Graphical abstract: {alpha}{yields}{beta} PbBiOV{sub 1-x}As{sub x}O{sub 4} composition dependence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Li-S pouch cell with a reinforced sulfide glass solid-state electrolyte film separator

Here, in this paper, sulfide glass electrolyte powder with a nominal composition of (Li 2 S) 60 (SiS 2 ) 28 (P 2 S 5 ) 12 is hot pressed at a 330°C and 12 MPa into separator films using non-woven fiberglass reinforcement. The reinforced separator films are 93% dense, bendable, and have an ionic conductivity of 0.7 mS/cm at room temperature. When integrated into hybrid Li-S coin cells with liquid electrolyte, these reinforced glass separators blocked the parasitic polysulfide shuttle sufficiently to enable reversible cycling without LiNO 3 co-salt. Furthermore, the scalability of the reinforced glass separator technology is demonstrated by assembling and testing a hybrid single-layer pouch cell.

25 ENERGY STORAGE↗

Structural and impedance studies of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} synthesized by sol-gel method

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is synthesized by sol-gel method by using succinic acid as chelating agent. X-ray diffraction pattern confirms the material is spinel cubic structure with Fd3m space group. Impedance spectroscopy analysis of spinel LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} was performed under a wide frequency and temperature range of 50 Hz to 5 MHz and 303 K to 783 K respectively. The hopping of the electrons, ionic conductivity and activation energy were analyzed from the relaxation frequency of the imaginary impedance (Z”). The activation energy E{sub a} is calculated from the Arrhenius plots and it is found to be 0.3713 eV, which indicates the existence of oxygen vacancy in the material. Nyquist plot indicates the presence of grain effect in the material and suppression in the grain effect is observed with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Key Role of Grain Boundary Dynamics in Revolutionizing the Potential of Solid Electrolytes

Solid electrolytes (SEs) have the potential to enhance the safety and performance of Li-metal batteries. However, the existence of grain boundaries in polycrystalline SEs presents a significant challenge for both ionic and electronic migration, promoting the propagation of detrimental lithium dendrites. This study compares the roles of grain boundaries in electrical properties of three distinct SEs including garnet-type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZO), argyrodite-type Li 6 PS 5 Cl (LPSC), and NASICON-type Li 1+x+y Al x (Ti,Ge) 2-x Si y P 3-y O 12 (LATP). Results demonstrate that the electronic and ionic conductivities of solid-state electrolytes are affected differently by grain boundaries, depending on the specific type of electrolyte. For instance, LLZO and LATP experience dielectric breakdown at 3.7 and 5.3 V, respectively, while LPSC does not exhibit such behavior. Here, a new chemical modification is proposed that simultaneously alters the composition of both the surface and grain boundaries of SEs, ultimately reducing electronic conductivity for the LLZO SEs. Consequently, the proposed LLZO exhibits unprecedented dendrite-free cycling stability, achieving a remarkable 12 000-h lifetime at room temperature, surpassing conventional strategies such as surface coatings in dendrite mitigation. This study highlights the significance of modifying grain boundaries to design safe and durable Li-metal batteries. It provides new insights for developing SEs that are highly resistant to dendrite formation.

36 MATERIALS SCIENCE↗