Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACRYLIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Conversion of Lignocellulosic Biomass to Ethanol and Butyl Acrylate

Conversion of Lignocellulosic Biomass to Ethanol and Butyl Acrylate. The purpose of Archer Daniels Midlands Integrated Biorefinery (IBR) was to demonstrate a modified acetosolv process on corn stover. It would show the fractionation of crop residue to distinct fractions of cellulose, hemicellulose, and lignin. The cellulose and hemicellulose fractions would be further converted to ethanol as the primary product and a fraction of the sugars would be catalytically converted to acrylic acid, with butyl acrylate the final product. These primary steps have been demonstrated.

09 BIOMASS FUELS↗

The Effect of Cofed Species on the Kinetics of Catalytic Methyl Lactate Dehydration on NaY

The catalytic dehydration of biomass-derived methyl lactate to acrylic acid is a renewable route to a high-value, high-volume monomer, but achieving high selectivity and production rates remains challenging. One roadblock is that the role of the species cofed with methyl lactate, typically water, in the dehydration mechanism over alkali-metal-exchanged zeolites remains unclear. Here, we determined the effects of protic and aprotic cofed species, including water, methanol, and methyl acetate, on the rate and selectivity of methyl lactate dehydration over NaY via kinetic and spectroscopic investigations. We show that water plays multiple competing roles in the mechanism: (1) generating the unselective Brønsted acid sites on NaY leading to acetaldehyde and coke formation; (2) suppressing the activity of the Lewis acid sites responsible for lactate dehydration; and (3) facilitating the displacement of adsorbed sodium acrylate by lactate, leading to the formation of acrylic acid. The first process increases the rate of side product formation, while the second and third processes decrease and increase the dehydration rate, respectively. As a result of these competing roles, the rate-limiting step of methyl lactate dehydration shifts from acrylate product recovery to sodium lactate dehydration as the concentration of water increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Water Management of Electrospun Nanofiber Membrane Electrode Assemblies at High Current Densities Measured in Operando Using Neutron Radiography

Neutron radiography was used to measure water concentrations through the cross-sections of sprayed gas diffusion electrodes (GDE) and electrospun perfluorosulfonic acid-platinum nanofiber (NF) electrodes during fuel cell operation. The performance of Generation 1 poly(acrylic acid)-based NF electrodes is improved at high current densities compared to the baseline given by a GDE cell. Through-thickness water profiles reveal that at high current densities, the water concentrations within the membrane electrode assembly (MEA) and gas diffusion layers are around 2x lower in the nanofiber-containing MEA compared to the baseline GDE, commensurate with the observed polarization performance. In Generation 2 electrospun nanofiber electrodes, poly(ethylene oxide)-based electrodes show higher performance than poly(acrylic acid) electrodes, while retaining less water in the MEA. Furthermore, these results imply that the electrospun nanofiber electrodes have an improved ability to maintain hydration without flooding, which leads to improved performance over a range of relative humidities.

42 ENGINEERING↗

Equilibrium, Kinetic and Thermodynamic Studies Of Lead (II) Sorption on Hydrolyzed Starch Graft Copolymers

Hydrolyzed starch graft poly (acrylic acid) and starch graft poly(acrylonitrile) copolymers were used as a sorbents for the removal of Pb(II) from aqueous solution in batch process. The sorbents were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The effect of contact time, initial concentration and temperature were assessed to optimize the conditions for maximum sorption of the metal ions. The experimental data were analyzed by Langmuir, Freundlich, Temkin, Dubinin Radushkevich and Sips isotherm models. The Freundlich and the Sips isotherms confirmed the applicability of the models. The sorption capacity of the sorbent was found to be 118.61 mg/g for starch graft poly (acrylic) acid and 115.83 mg/g for starch graft poly (acrylonitrile). The Sorption kinetics was assessed by Lagergren pseudo first order, pseudo second order, Elovich equation, Intraparticle diffusion and the liquid film diffusion models. The experimental data fitted very well with the Elovich equation and the Intraparticle kinetic models. The thermodynamic analysis showed that the sorption was a spontaneous and endothermic process. The results indicated that starch graft copolymers can be used as an effective sorbents for Pb (II) removal from aqueous media.

36 MATERIALS SCIENCE↗

Metal Adsorbance in Abattoir Wastewater Using Cross-Linked Chitosan Derivatives

Isolation of different elements from effluent water obtained from the red meat and the poultry industry was done using a series of modified chitosan cross-linked with glutaraldehyde, formaldehyde, epichlorohydrine, maleic anhydride, p-benzoquinone, poly-(ethylene) glycoldiglycidyl ether (PEG diglycidyl ether), 1-vinyl-2-pyrrolidone, 1,3-dichloroaceone, acrylic acid and s-methylbutylamine. Some parameters of the '22' chitosan derivatives crosslinked products each of red meat and poultry wastewater samples were analyzed like electrical conductance, pH, biochemical oxygen demand, chemical oxygen demand and total dissolved solids. All these parameters values were within the permissible values of effluent discharge in the literature study. Different cross-linked chitosan products were tested for their ability to adsorb different elements from the red meat and poultry effluent wastewaters. ICP-OES analysis revealed the presence of up to '18' elements in both samples (Ca, Mg, Na, K, Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sr and Zn). Both results also showed the presence of alkali and alkaline earth group metals (Ca, Mg, Na and K) as major elements (> 100 mg/L). The performance of each cross linked chitosan product was assessed based on the amount (concentration) and the quantity of elements adsorbed. Amongst the '22' of cross-linked chitosan products tested in this study, shrimp chitosan cross-linked with maleic anhydride (J1), shrimp chitosan cross-linked with acrylic acid (I2) chitosan products were shown to be better adsorbants for Cr and Ni due to the possible influence of the amino, carboxylic, hydroxyl, etc. functional groups in these chitosan products. Results also showed the presence of smaller concentrations (0.05–0.2 mg/L) of heavy metals (Cr, Ni, Cu and Pb) in the eluted solution which suggests the versatility of the adsorbent to different elements.

36 MATERIALS SCIENCE↗

Hydrogen-bonded aggregates in precise acid copolymers

We perform atomistic molecular dynamics simulations of melts of four precise acid copolymers, two poly(ethylene-co-acrylic acid) (PEAA) copolymers, and two poly(ethylene-co-sulfonic acid) (PESA) copolymers. The acid groups are spaced by either 9 or 21 carbons along the polymer backbones. Hydrogen bonding causes the acid groups to form aggregates. These aggregates give rise to a low wavevector peak in the structure factors, in agreement with X-ray scattering data for the PEAA materials. The structure factors for the PESA copolymers are very similar to those for the PEAA copolymers, indicating a similar distance between aggregates which depends on the spacer length but not on the nature of the acid group. The PEAA copolymers are found to form more dimers and other small aggregates than do the PESA copolymers, while the PESA copolymers have both more free acid groups and more large aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling the Role of Compositional Drifts on the Tack of Pressure‐Sensitive‐Adhesives

Abstract Pressure‐sensitive‐adhesives (PSAs) are pervasive in electronic, automobile, packaging, and biomedical applications due to their ability to stick to numerous surfaces without undergoing chemical reactions. These materials are typically synthesized by the free radical copolymerization of alkyl acrylates and acrylic acid, leading to an ensemble of polymer chains with varying composition and molecular weight. Here, reversible addition−fragmentation chain‐transfer (RAFT) copolymerizations in a semi‐batch reactor are used to tailor the molecular architecture and bulk mechanical properties of acrylic copolymers. In the absence of cross‐links, the localization of acrylic acid toward the chain ends leads to microphase separation, creep resistance, and enhanced tack. However, in the presence of Al(acac) 3 crosslinker, the creep resistance remains unchanged and mostly the large‐strain mechanical properties are affected. This behavior is attributed to microphase separation, but also to a change in the energy required to break physical associations, and untangle and elongate associative polymers to large deformations.

Polymer Science↗

Spatial Molecular Layer Deposition of Ultrathin Polyamide To Stabilize Silicon Anodes in Lithium-Ion Batteries

Cycling stability is central to implementing silicon (Si) anodes in next-generation high-energy lithium-ion batteries. However, challenges remain due to the lack of effective strategies to enhance the structural integrity of the anode during electrochemical cycling. Here, we develop a nanoscale polyamide coating, using spatial molecular layer deposition (MLD) of m-phenylenediamine and trimesoyl chloride precursors, to preserve the structural integrity of Si anodes. Poly(acrylic acid) (PAA) has been widely used in Si-based anodes as a binding agent due to its effective binding interactions with Si particles. However, the structural integrity of the anode is compromised by thermochemical decomposition of the poly(acrylic acid) binder, which can occur during electrode drying or during electrochemical cycling. Decomposition causes a 62% decrease in the elastic modulus of the Si anode, as measured by nanoindentation in electrolyte-soaked conditions. This study shows that an ultrathin polyamide coating counteracts this structural degradation, increases the elastic modulus of the degraded anode by 345%, and improves cohesion. Electrochemical analysis of polyamide-coated anodes reveals a film thickness dependence in cycling behavior. High overpotentials and fast capacity fading are observed for Si anodes with a 15 nm coating, whereas Si anodes with a 0.5 nm coating demonstrate stable cycling over 150 cycles with a capacity >1400 mAh g-1. Our findings identify polyamide as an effective electrode coating material to enhance structural integrity, leading to excellent cyclability with higher capacity retention. Furthermore, the use of the spatial MLD approach to deposit the coating enables short deposition time and a facile route to scale-up.

25 ENERGY STORAGE↗

Polyacids as Modulators for the Synthesis of UiO-66

Poly(acrylic acid) (PAA) and poly(vinylbenzoic acid) (PBA) were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization and used as modulators for the synthesis of the metal–organic framework (MOF) UiO-66 (UiO = University of Oslo). Whereas typical syntheses of UiO-66 require large excesses of acid modulators, such as acetic acid or benzoic acid, to achieve controlled particle size and morphology of the resulting MOF particles, the use of polymerized acids allows for narrow particle size distributions at sub-stoichiometric quantities of modulator. Here, we show using scanning electron microscopy and dynamic light scattering techniques that polyacids can act as alternative modulators for the growth of UiO-66.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Stable, Ultrasmall Polymer-Grafted Nanobins (usPGNs) with Stimuli-Responsive Capability

In this work, highly stable and stimuli/pH-responsive ultrasmall polymer-grafted nanobins (usPGNs) have been developed by grafting a small amount (10 mol %) of short (4.3 kDa) cholesterol-terminated poly(acrylic acid) (Chol-PAA) into an ultrasmall unilamellar vesicle (uSUV). The usPGNs are stable against fusion and aggregation over several weeks, exhibiting over 10-fold enhanced cargo retention in biologically relevant media at pH 7.4 in comparison with the parent uSUV template. Coarse-grained molecular dynamics (CGMD) simulations confirm that the presence of the cholesterol moiety can greatly stabilize the lipid bilayer. They also show extended PAA chain conformations that can be interpreted as causing repulsion between colloidal particles, thus stabilizing them against fusion. Notably, CGMD predicted a clustering of the Chol-PAA chains on the lipid bilayer under acidic conditions due to intra- and interchain hydrogen bonding, leading to the destabilization of local membrane areas. This explains the experimental observation that usPGNs can be triggered to release a significant amount of cargo upon acidification to pH 5. These developments put the lipid-bilayer-embedded Chol-PAA in stark contrast with traditional poly(acrylic acid) systems where the molar mass (M n ) of the polymer chains must exceed 16.5 kDa to achieve stimuli-responsive changes in conformation. They also distinguish the small usPGNs from the much-larger polymer-caged nanobin platform where the Chol-PAA chains must be covalently cross-linked to engender stimuli-responsive behaviors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amphiphilic Block Copolymers for Flocculation and Hydrophobization of Legacy Waste Suspensions in Flotation Driven Dewatering Operations

There exists a degrading legacy fuel pond at the Sellafield site (UK), known as the First-Generation Magnox Storage Pond (FGMSP). After being placed into a passive care and maintenance regime resulting in a long storage period, the fuel rods, primarily their cladding, corroded in the pond forming magnesium hydroxide based sludges and suspended material. These ponds are a grave concern to the British government in terms of hazard and risk reduction. Therefore, decommissioning of these ponds is a top priority beginning with the contaminant retrievals process [1]. The pond has accumulated significant quantities of waste materials amongst the skips of fuel, including but not limited to: large inventories of corroded Magnox sludge, fuel rod fragments, metal fragments (from fuel skips), concrete degradation products (from the pond infrastructure), wind-blown sand, and other materials such as bird guano and animal remains. This challenge requires a chemically robust technology to complete sludge retrievals [2]. As nuclear is different, a more stringent process operation criteria is required. From the criteria, flotation was selected as a viable technology. Flotation involves the application of collector molecules which modify the hydrophobicity of suspended particles allowing them to adsorb to rising bubbles. As some particles lack inertia for flotation due to their size, dual flocculant/collector agents can be deployed for greater particle recovery, in this case, amphiphilic diblock copolymers. Two copolymers of Poly(acrylic acid)-b-poly(n-butyl acrylate) (or PAA-b-PnBA), of different hydrophobic chain lengths (PBA) were synthesized for flotation campaigns. Flotation has shown promise to be a valuable rapid dewatering strategy for decommissioning of legacy waste ponds whilst upholding the required operational criteria. This research has shown: PAA-b-PnBA copolymers promote flocculation of Mg(OH){sub 2} particulates. Diblock copolymers retain more fluid than traditional surfactant based collectors wrt. relative particulate recovery performance- where longer PnBA chain length polymers performed best. Performance appears to be hydrodynamically limited due to over-flocculation of Mg(OH){sub 2}. Potential to combine with sedimentation for high particle recovery with low fluid carryover.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of calcium ions on the interactions between surfaces end-grafted with weak polyelectrolytes

We study the interactions between two planar surfaces end-tethered with poly(acrylic acid) polymers in electrolyte solutions containing calcium ions, using a molecular theory. We found that by adding divalent calcium ions to an aqueous solution of monovalent ions leads to a dramatic reduction in the size and range of effective interactions between the two polymer layers. This is caused by the formation of favorable calcium bridges, i.e., complexes of one calcium ion and two carboxylic acid monomers, that reduce the effective charge of the polymer layers and, at sufficient calcium ion concentrations, can cause the polymer layers to collapse. For calcium ion concentrations above approximately 1 mM, the repulsions between the opposing end-grafted surfaces disappear and attractions occur. These attractions are correlated with the occurrence of interlayer divalent calcium bridges and do not occur for poly(acrylic acid) layers in contact with reservoir solutions containing only monovalent ions. This result indicates the suitability of divalent calcium ions to control and change the interaction range and strength, which is a useful property that is desirable in the design of stimuli-responsive nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of TiO{sub 2} nanoparticles by self-assembling reverse micelle cores of PS-b-PAA for functional textile applications

Highlights: • TiO{sub 2} nanoparticles were synthesized within poly(styrene)-b-poly(acrylic acid) micelles. • The copolymer solution including nano TiO{sub 2} was coated onto textile fabrics. • UV-protective factor of nano TiO{sub 2} coated fabrics was estimated as 50+. • Nano TiO{sub 2} coated fabrics was found to exhibit a high photocatalytic activity. - Abstract: Titanium dioxide (i.e., titanium(IV) oxide, TiO{sub 2}) nanoparticles have been fabricated using a copolymer templating technique in micellar solution of poly(styrene)-block-poly(acrylic acid), PS(10912)-b-PAA(4842) synthesized by atom transfer radical polymerization (ATRP). The size and morphology of the synthesized TiO{sub 2} nanoparticles have been characterized via TEM and XRD measurements. The average size of TiO{sub 2} nanoparticles was determined as 13 ± 3 and 13 ± 4 nm for titanium:copolymer ratios of 20:1 and 33:1, respectively. The copolymer solution including nano TiO{sub 2} particles has been coated onto textile fabrics to enhance their UV-blocking and self-cleaning properties. It has been determined that nano TiO{sub 2} coated textile fabrics have very good UV-blocking properties with 50+ of the ultraviolet protecting factor (UPF) and high photocatalytic efficiency with 69.2% of the photodegradation of methylene blue.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Data for High Yield Production of 3-Hydroxypropionic Acid Using Issatchenkia orientalis

Biomanufacturing provides a more sustainable alternative to fossil-based chemical manufacturing. 3-Hydroxypropionic acid (3HP) is a top Department of Energy value-added chemical and precursor to bioplastics, yet cost-effective microbial production remains elusive. Here, we establish the acid-tolerant yeast Issatchenkia orientalis as a robust host for low-pH 3HP biosynthesis. Genome-scale modeling identifies the β-alanine pathway as optimal, offering the highest theoretical yield and lowest oxygen requirement. Thermodynamic analysis confirms its favorability under acidic conditions. Using sequence similarity network analysis, we discover highly active aspartate 1-decarboxylase (PAND), β-alanine-pyruvate aminotransferase (BAPAT), and 3HP dehydrogenase (YDFG), which significantly improve the pathway efficiency. Next, to further elevate the production, pathway optimization through multi-copy PAND integration, byproduct elimination (knockouts of pyruvate decarboxylase and glycerol-3-phosphate dehydrogenase), and reinforcement of aspartate flux by overexpression of pyruvate carboxylase and aspartate amino transferase improves the titer to 29 g/L in shake flasks. Fed-batch fermentation at pH 4 with low-cost corn steep liquor medium further increases the production to 92 g/L with 0.7 g/g yield and 0.55 g/L/h productivity. Techno-economic analysis indicates that such performance could potentially enable a financially viable process for sustainable acrylic acid production. This work establishes I. orientalis as a next-generation platform for cost-effective 3HP production and paves the way toward industrial commercialization.

Bioproducts↗

Data for 3-Hydroxypropionic Acid Recovery from Fermentation Broth through Novel Downstream Processing: Technoeconomic Analysis

This study develops and validates a simplified, fully solvent-free downstream processing (DSP) strategy for high-purity recovery of 3-hydroxypropionic acid (3-HP) from real fermentation broth containing 62.3 g/L of 3-HP. Optimized activated carbon treatment achieved 98% color removal, while Amberlite IRA-67 was operated at pH 4.5 and 30 °C to minimize product loss. This is the first integrated demonstration of a fully solvent-free DSP enabling recovery of bio-based 3-HP as both a solid sodium salt and a concentrated aqueous solution, supported by techno-economic analysis. At lab scale, the process achieved 77.3% recovery of sodium 3-HP with 83.2% (w/w) purity and produced a 30% (w/v) aqueous solution. Techno-economic analysis yielded minimum selling prices of $0.551/kg for the solution and $0.892/kg for the salt, both below target thresholds for cost-competitive bio-acrylic acid production. Overall, these results demonstrate an efficient, scalable, and economically viable industrial pathway for 3-HP recovery.

Bioproducts↗

Tailoring the Surface of Silicon Nanoparticles for Enhanced Chemical and Electrochemical Stability for Li-Ion Batteries

Organic monolayers of epoxy-containing oligo(ethylene oxide)s were grafted to the surface of silicon nanoparticles via a hydrosilylation reaction. The surface functional groups suppressed the chemical and electrochemical reactivity of the as-grown and lithiated silicon nanoparticles with high material utilization. A robust Si/electrolyte interphase was formed with the participation of the grafted organic groups with facilitated Li+ transfer and was further enforced by electrode integrity via the epoxy/poly(acrylic acid) (PAA) binder reaction. The improved cycling stability and post-test analysis indicate that surface functionalization on the Si particle level is a feasible approach to enabling a Si anode in high-energy-density lithium-ion batteries.

36 MATERIALS SCIENCE↗

A2 and A2B2 Benzoporphyrins as sensitizers for dye-sensitized solar cells

The first example of A2B2 tetrabenzoporphyrin (KW-4) was synthesized, characterized and evaluated as a sensitizer for dye-sensitized solar cells. UV-vis and fluorescence spectroscopy revealed red-shifted and broadened absorption spectra of A2B2 tetrabenzoporphyrin as compared with its A2 dibenzo- and A2B2 dibenzoporphyrin analogues, which is a desired feature of dyes for dye-sensitized solar cells. DFT calculations also indicate favorable electron density distribution on the HOMO and LUMO of KW-4. However, the power conversion efficiency of the solar cell based on tetrabenzoporphyrin KW-4 displayed inferior performance than that of the solar cell based on A2 dibenzoporphyrin KW-2. The lower performance of the KW-4 cell was ascribed to two factors: the low lying LUMO energy level leading to less efficient electron injection and the “flat geometry” of the dye on TiO 2 surface facilitating charge recombination and decreasing dye loading. The investigation of anchoring group effect suggests that the acrylic acid group is a better anchoring group than pentadienyl carboxylic acid.

A2B2↗

Poly-Amide Modified Copper Foam Electrodes for Enhanced Electrochemical Reduction of Carbon Dioxide

A strategy to modulate the electrocatalytic activity of copper toward CO 2 reduction involving adsorption of acrylamide, acrylic acid, and allylamine polymers is presented. Modification of electrodeposited copper foam with poly(acrylamide) leads to a significant enhancement in faradaic efficiency for ethylene from 13% (unmodified foam) to 26% at -0.96 V vs RHE, whereas methane yield is unaffected. Effects from crystalline phase distribution and copper oxide phases are ruled out as the source of enhancement through XPS and in situ XRD analysis. DFT calculations reveal that poly(acrylamide) adsorbs on the copper surface via the oxygen atom on the carbonyl groups and enhances ethylene formation by (i) charge donation to the copper surface that activates CO for dimerization, (ii) chemical stabilization of the CO dimer (a key intermediate for C 2 products) by hydrogen-bond interactions with the -NH 2 group, and (iii) facilitating the adsorption of CO molecules near the polymer, increasing local surface coverage. Poly(acrylamide) with copper acts as a multipoint binding catalytic system where the interplay between activation and stabilization of intermediates results in enhanced selectivity toward ethylene formation. Finally, modification with poly(acrylic acid) which has a similar structure to poly(acrylamide) also shows some enhancement in activity but is unstable, whereas poly(allylamine) completely suppresses CO 2 reduction in favor of the hydrogen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗