Search NASA⌕ Search

SEARCH · Search NASA

Results for “Axis Tilt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

90 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Method using a electrostatic generator/motor rotor electrode system suitable for installation on the outer surface of an EMB rotor

Electrostatic generator electrodes mounted on the outer surface of a fiber-composite rotor. The conducting strips are mounted with a slight tilt in angle such that the electrodes will experience no tension or compression effects as the rotor spins up or slows down. The compression would come about from effects associated with the Poisson Ratio. This change can eliminate any metal fatigue or loss of bonding that might have arisen if the electrodes were to be aligned with the axis.

42 ENGINEERING↗
DOE OSTI2023

Birefringent Glass‐Engraved Tilted Pillar Metasurfaces for High Power Laser Applications

Abstract Birefringent materials—which are highly needed in high power laser systems—may be limited in usage due to the laser‐induced damage threshold of traditional birefringent materials. This work reports here on all‐glass metasurfaces, fabricated by angled etching through sacrificial metal nanoparticle (NP) etching masks, for generation of effective birefringence in the formed layer. As a result, a fused silica metasurface, monolithic to the underlying substrate, is demonstrated to exhibit a birefringence of 6.57° under 375 nm illumination. Full‐wave analysis shows a good agreement with the measurement and presents potential paths forward to increasing the effective metasurface birefringence. This is the first demonstration, to the best of knowledge, of an etching technique to obtain the resulting tilted pillar‐like nanofeatures. The anisotropy of the metasurface nanoelements along the two window in‐plane major axes presents different effective paths for the two polarizations and thus generates birefringence in a nonbirefringent material. Additionally, the imparted anisotropy lends itself to manipulation of physical properties of the surface as well, with metasurface feature orientation suppressing water flow along one principal axis and giving rise to water flow steering capabilities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

H-AMR: A New GPU-accelerated GRMHD Code for Exascale Computing with 3D Adaptive Mesh Refinement and Local Adaptive Time Stepping

General relativistic magnetohydrodynamic (GRMHD) simulations have revolutionized our understanding of black hole accretion. Here, we present a GPU-accelerated GRMHD code H-AMR with multifaceted optimizations that, collectively, accelerate computation by 2–5 orders of magnitude for a wide range of applications. First, it introduces a spherical grid with 3D adaptive mesh refinement that operates in each of the three dimensions independently. This allows us to circumvent the Courant condition near the polar singularity, which otherwise cripples high-resolution computational performance. Second, we demonstrate that local adaptive time stepping on a logarithmic spherical-polar grid accelerates computation by a factor of ≲10 compared to traditional hierarchical time-stepping approaches. Jointly, these unique features lead to an effective speed of ~10 9 zone cycles per second per node on 5400 NVIDIA V100 GPUs (i.e., 900 nodes of the OLCF Summit supercomputer). We illustrate H-AMR's computational performance by presenting the first GRMHD simulation of a tilted thin accretion disk threaded by a toroidal magnetic field around a rapidly spinning black hole. With an effective resolution of 13,440 × 4608 × 8092 cells and a total of ≲22 billion cells and ~0.65 × 10 8 time steps, it is among the largest astrophysical simulations ever performed. We find that frame dragging by the black hole tears up the disk into two independently precessing subdisks. The innermost subdisk rotation axis intermittently aligns with the black hole spin, demonstrating for the first time that such long-sought alignment is possible in the absence of large-scale poloidal magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Impact Testing and Analysis of Modified Metal Slugs

This report summarizes initial results from a series of gun experiments which were conducted at the DICE facility. The target of these experiments was a modified metal slug composed of a tantalum/tungsten alloy (Ta-10W). The general geometry of the slug was a right circular cylinder with a through-hole cut normal to the cylinder's axis. In all experiments, hardened steel impactors were used, the desired impact velocity was 200 m/s, the slug was preheated to a target temperature of 175° C, photon doppler velocimetry (PDV) was used to measure the projectile velocity before and after impact, and the impact event was recorded with high-speed video. In two of the impacts the slug was oriented perpendicular to the projectile, while in the remaining two it was tilted 8° from normal. Initial high-speed speed video results showed slug failure in the tilted impact case, while the slug survived normal impacts. Recovery fixtures were used to preserve impacted slugs for future postmortem analysis. Discussions are included regarding improvements to potential future experiments involving these slugs.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Nano-laminography with a transmission X-ray microscope

Nano-laminography combines the penetrating power of hard X-rays with a tilted rotational geometry to deliver high-resolution, three-dimensional images of laterally extended, flat specimens that are otherwise incompatible with, or difficult to image using, conventional nano-tomography. In this work, we demonstrate a full-field, X-ray nano-laminography system implemented with the transmission X-ray microscope at beamline 32-ID of the upgraded Advanced Photon Source at Argonne National Laboratory, USA. By rotating the sample around an axis inclined by 20° to the incident beam, the technique minimizes the long optical path lengths that would otherwise generate excessive artifacts when planar samples are imaged edge-on. The efficiency of the technique is demonstrated with 50 nm spatial resolution and minute-scale temporal resolution 3D imaging of a planar integrated circuit sample and targeted imaging of an individual particle within a powder sample, where mounting procedures are typically challenging in regular nano-tomography. The sample mounting strategy, data acquisition, and reconstruction method will also be discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Simulating Wind-Driven Loading on PV Systems

As PV modules continue to trend toward larger, thinner, and more flexible forms they grow more susceptible to damage from dynamic wind loading. As a result, understanding the impact of wind on PV systems, particularly when mounted on compliant solar-tracking hardware, and identifying robust, stable array layouts and stow strategies is becoming increasingly important for the PV community. We are developing an open-source software package, PVade (PV aerodynamic design engineering), to simulate the cascading fluid-structure interaction that occurs within single-axis, solar-tracking arrays to enable researchers to test hardware, layout, and tracker control changes, leading to enhanced stability and a reduction in wind-driven damage. We will give an overview of the PVade software and present the latest outcomes from our ongoing validation campaign in which we compare time series and statistical structural responses with field data. From there, we will present simulated results from a larger, multi-row array and highlight the effect of varying tracker angles on stability and the differences between positive and negative tilt angles.

fluid↗
DOE OSTI2022

Numerical and experimental characterization of twin transmission across grain boundaries along the forward and lateral directions

Pervasive deformation twinning and transmission events across grain boundaries (GBs) affect the strength and failure of hexagonal close-packed (HCP) magnesium. A three-dimensional twin can transmit along the twinning shear direction, (forward), and along the direction perpendicular to both the twinning plane normal and the shear direction, (lateral). For the first time, phase-field calculations and electron backscatter diffraction (EBSD)-based statistical analysis are combined to investigate the effect of the twinned grain boundary characteristics on twin transmission (TT) along the forward and lateral directions. This combined analysis reveals that TT propensity decreases with increasing misorientation angle across the GB for both forward and lateral directions. Also, the TT is more favorable along the lateral than along the forward direction. Twin transmission seems harder across GBs with a misorientation axis closer to the twin -direction than the other directions ( and ). Further, the PF calculations reveal that, at the onset of a transmission process, the crystallography tends to be preserved in the case of lateral transmission, whereas, in the forward transmission case, the transmitted twin punches straight through the GBs and its morphology prevails. Additionally, the EBSD analysis finds that pure forward and lateral transmissions do not occur often, yet reveals a preference for lateral propagation consistent with PF simulations. Further, the local twin transmission configurations observed in the actual material do not correspond to pure tilt or twist GBs, which are most commonly considered as model cases.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shear-induced polydomain structures of nematic lyotropic chromonic liquid crystal disodium cromoglycate

Lyotropic chromonic liquid crystals (LCLCs) represent aqueous dispersions of organic disk-like molecules that form cylindrical aggregates. Despite the growing interest in these materials, their flow behavior is poorly understood. Here, we explore the effect of shear on dynamic structures of the nematic LCLC, formed by 14 wt% water dispersion of disodium cromoglycate (DSCG). We employ in situ polarizing optical microscopy (POM) and small-angle and wide-angle X-ray scattering (SAXS/WAXS) to obtain independent and complementary information on the director structures over a wide range of shear rates. The DSCG nematic shows a shear-thinning behavior with two shear-thinning regions (Region I at $\dot{\gamma}$ < 1 s -1 and Region III at $\dot{\gamma}$ > 10 s -1 ) separated by a pseudo-Newtonian Region II (1 s-1 < $\dot{\gamma}$ < 10 s -1 ). The material is of a tumbling type. In Region I, $\dot{\gamma}$ < 1 s -1 , the director realigns along the vorticity axis. An increase of [small gamma, Greek, dot above] above 1 s -1 triggers nucleation of disclination loops. The disclinations introduce patches of the director that deviates from the vorticity direction and form a polydomain texture. Extension of the domains along the flow and along the vorticity direction decreases with the increase of the shear rate to 10 s -1 . Above 10 s -1 , the domains begin to elongate along the flow. At $\dot{\gamma}$ > 100 s -1 , the texture evolves into periodic stripes in which the director is predominantly along the flow with left and right tilts. The period of stripes decreases with an increase of $\dot{\gamma}$. The shear-induced transformations are explained by the balance of the elastic and viscous energies. In particular, nucleation of disclinations is associated with an increase of the elastic energy at the walls separating nonsingular domains with different director tilts. The uncovered shear-induced structural effects would be of importance in the further development of LCLC applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Global Techno-Economic Performance of Bifacial and Tracking Photovoltaic Systems

Although most of the current photovoltaic (PV) system installations use monofacial modules with fixed-tilt mounting structures, bifacial modules, trackers, and the combination of them are also getting more attention as potential candidates to further reduce the PV levelized cost of electricity (LCOE). This work is then the first to present a worldwide analysis on the yield potential and cost-effectiveness of PV farms composed of monofacial fixed-tilt and single/dual (1T/2T) tracker installations, as well as their bifacial counterparts. Our approach starts by estimating the irradiance reaching the front and rear surface of the modules for the different system designs (validated based on data from real PV systems and results from the literature) to estimate their energy production (row-row shading is neglected). Subsequently, the overall system cost during their 25-year lifetime is factored in, and LCOE is obtained. The results reveal that bifacial-1T installations increase energy yield by 35% and reach the lowest LCOE for the majority of the world (93.1% of the land area). Although dual axis trackers achieve the highest energy generation — especially for bifacial modules — their cost is still too high, and are therefore not as cost-effective. Sensitivity analyses based on the Monte Carlo and region sensitivity approach are performed to analyze the impact of input assumptions on the calculated LCOE. These reveal that our conclusions are robust in general but exact configuration to choose depends on specific site conditions. This investigation is not only of interest to the scientific community, but also can be used as a guide for PV installation companies and investors to determine the most suitable technology for a particular location.

14 SOLAR ENERGY↗
DOE OSTI2023

Mass and momentum transport in the Tilted Rocket Rig experiment

Here, high-fidelity large eddy simulations of the inclined Rayleigh-Taylor instability in the Tilted Rocket Rig experimental configuration [Smeeton and Youngs, AWE Report No. O 35/87 (1987)] are performed using a tenth-order compact finite difference code. These simulations are analyzed for spatial distributions of turbulent kinetic energy, turbulent mass flux velocity, species mass fraction flux, species mass fraction variance, and Favre-averaged Reynolds stresses at two time instances, t = 37 ms and t = 52 ms. Additionally, the vertical distribution of the components of the unclosed budget equations over the center of the domain for these quantities are examined. The dominant terms of these budget equations are further decomposed to examine the principal contributions to these terms in each axis. Notably, the principal contribution to the horizontal turbulent mass flux velocity budget is found to be from a term which is commonly neglected in many Reynolds-averaged Navier-Stokes models.

42 ENGINEERING↗
DOE OSTI2024

Strain Programming of Oxygen Octahedral Symmetry in Perovskite Oxide Thin Films

The collective rotations of oxygen octahedra play an important role in determining the physical properties of functional perovskite oxides. The epitaxial strain can serve as an effective means to modify the oxygen octahedral symmetry (OOS), i.e., oxygen octahedral rotation or tilt (OOR/OOT). However, the strain-OOS coupling that may alter the details of the OOS, thereby the physical properties, has not been fully understood. In this work, it is demonstrated that epitaxial strain can not only induce a structural phase transition but also precisely tune the degree of OOR. The correlated metal CaNbO 3 , which is orthorhombic, is studied by growing as epitaxial thin films. By imposing epitaxial strain, it is found that the film undergoes a structural phase transition from orthorhombic to tetragonal upon fully straining (i.e., from a + b − b − to a 0 a 0 c − ). In unstrained films, the octahedral rotation along the c-axis is as large as 15.7° that can be tuned to 6.6° by strain. This finding offers a general approach to manipulating OOR/OOT via strain engineering in complex oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Radiation Transport Two-temperature GRMHD Simulations of Warped Accretion Disks

In many black hole (BH) systems, the accretion disk is expected to be misaligned with respect to the BH spin axis. If the scale height of the disk is much smaller than the misalignment angle, the spin of the BH can tear the disk into multiple, independently precessing "sub-disks." This is most likely to happen during outbursts in black hole X-Ray binaries (BHXRBs) and in active galactic nuclei (AGNs) accreting above a few percent of the Eddington limit, because the disk becomes razor-thin. Disk tearing has the potential to explain variability phenomena including quasi-periodic oscillations in BHXRBs and changing-look phenomena in AGNs. Here, we present the first radiative two-temperature general relativistic magnetohydrodynamic (GRMHD) simulation of a strongly tilted (65°) accretion disk around an M BH = 10 M ⊙ BH, which tears and precesses. This leads to luminosity swings between a few percent and 50% of the Eddington limit on sub-viscous timescales. Surprisingly, even where the disk is radiation-pressure-dominated, the accretion disk is thermally stable over t ≳ 14,000 r g /c. This suggests warps play an important role in stabilizing the disk against thermal collapse. The disk forms two nozzle shocks perpendicular to the line of nodes where the scale height of the disk decreases tenfold and the electron temperature reaches T e ~ 10 8 –10 9 K. In addition, optically thin gas crossing the tear between the inner and outer disk gets heated to T e ~ 108 K. This suggests that warped disks may emit a Comptonized spectrum that deviates substantially from idealized models.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Magnetoelastic coupling, negative thermal expansion, and two-dimensional magnetic excitations in FeAs

We present a temperature-dependent investigation of the local structure and magnetic dynamics of the FeAs binary. The magnetic susceptibility χ (T) result shows an anomalous broad feature up to 550 K, with χ continuing to increase above the Néel antiferromagnetic ordering temperature (T N =70K), peaking at ~250 K, then decreasing gently above. It is remarkable that this peak susceptibility temperature corresponds to the onset of anisotropic negative thermal expansion in both the a and c axes, suggesting that magnetic interactions are affecting the structure even well above the Néel point. A systematic investigation into local bonding correlations, from time-of-flight neutron pair distribution function analyses, shows the octahedral volume around each Fe site growing monotonically while adjacent octahedra tilt toward one another before relaxing away past this peak in the anomalous magnetic susceptibility. We use inelastic-neutron scattering to map spin-wave excitations in FeAs at temperatures above and below the T N . We find magnetic excitations near T N to be very different from the excitations in the ground state at 1.5 K. Spin waves measured at 1.5 K are three dimensional (3D), however, in the vicinity of the magnetic transition, the magnetic fluctuations clearly indicate two-dimensional (2D) character in this intrinsically 3D crystal structure. Unlike the undoped 2D parents of iron-arsenide superconductors, where the magnetic correlations are considerably weaker along the c axis than in the ab plane, inelastic neutron scattering here shows that the spin fluctuations in the 3D FeAs binary are nearly 2D in the bc plane at 90 K. These results demonstrate the importance of short-range correlations in understanding the magnetic properties of transition-metal binaries, and suggest how 2D excitations, even in a 3D structure, can potentially become a breeding ground for unconventional superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Observation of an Orientational Glass in a Superlattice of Elliptically-Faceted CdSe Nanocrystals

Extensive prior work has shown that colloidal inorganic nanocrystals coated with organic ligand shells can behave as artificial atoms and, as such, form superlattices with different crystal structures and packing densities. Although ordered superlattices present a high degree of long-range positional order, the relative crystallographic orientation of the inorganic nanocrystals with respect to each other tends to be random. Recent works have shown that superlattices can achieve orientational alignment through combinations of nanocrystal faceting and ligand modification, as well as selective metal particle attachment to particular facets. These studies have focused on the assembly of high-symmetry nanocrystals, such as cubes and cuboctahedra. In this work, we study the assembly of elliptically faceted CdSe/CdS core/shell nanocrystals with one distinctive crystallographic orientation along the major elliptical axis. We show that the nanocrystals form an unexpectedly well-ordered translational superlattice, with a degree of order comparable to that achieved with higher-symmetry nanocrystals. Additionally, we show that, due to the particles' faceted shape, the superlattice is characterized by an orientational glass phase in which only certain orientations are possible due to entropically frustrated crystallization. In this phase, the nanocrystals do not exhibit a local orientational ordering but rather have distinct orientations that emerge at different locations within the same domain. The distinct orientations are a result of a facet-to-facet lock-in mechanism that occurs during the self-assembly process. These facet-to-facet alignments force the nanocrystals to tilt on different lattice planes forming different projections that we termed apparent polydispersity. Our experimental realization of an orientational glass phase for multifaceted semiconducting nanocrystals can be used to investigate how this phase is formed and how it can be utilized for potential optical, electrical, and thermal transport applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular-Resolution Electron Imaging of Defects and Dynamics at the Ice-Water Interface

Water crystallization into hexagonal ice (type I h ) is one of the most critical processes relevant to the Earth’s environment and human activities. However, despite recent breakthroughs in imaging non-equilibrium condensed ice structures, the ice-water interface has never been imaged at a molecular resolution. This is primarily due to the low stability of the hydrogen bonds in ice under high-resolution microscopy conditions and a lack of methods to prepare compatible samples. Here, this presentation describes the first molecular-resolution imaging of ice crystallized from liquid water and the ice-water interface using high-resolution transmission electron microscopy (HRTEM). By encapsulating deionized (DI) water between two amorphous carbon (a-C) TEM grids and subsequently freezing it with liquid N 2 on a cryo sample stage, we generated two types of ice: non-equilibrium, condensed ice from the atmosphere and encapsulated ice from the DI water (Fig. 1A). Condensed ice usually shows irregular, spherulitic shapes (Fig. 1B). Selected area electron diffraction (SAED) shows that they are a mixture of cubic and hexagonal crystals (Fig. 1C). On the contrary, encapsulated ice forms thin films that contain large-area single-crystalline regions of hexagonal ice oriented along the [0001] zone axis (Fig. 1D). Differential electron energy-loss spectroscopy (EELS) confirmed the high purity of the encapsulated ice free from organic contaminations that are common in other encapsulation methods for HRTEM such as graphene liquid cells. These single-crystalline areas are robust under the electron beam up to ~100 e/Å 2 s. Aberration-corrected HRTEM imaging in these areas achieved a line resolution of ~1.3 Å (Fig. 1E and F). This platform allows us to study near-equilibrium ice structures and dynamics at an unprecedented spatial resolution (Fig. 2). For example, we discovered subdomain-rich regions near the defective crystal edges despite the structure appearing single-crystalline according to diffraction criteria. These subdomains connect via low-angle grain boundaries with flat energy landscapes as a function of tilt angles (according to simulations), showing the high tolerance of ice to defect structures. When we tuned the sample temperature and electron flux rate, we observed radiolysis-controlled bubble generation and dissolution in ice single crystals near a steady state of bubble dynamics. Furthermore, rich beam-induced melting and recrystallization dynamics were observed at the ice-water interface with lattice resolution. These data represent the first observation of the ice-water phase transformation at the sub-nanometer level. In summary, the methods developed in this work enabled molecular-resolution observations of ice and the ice-water interface and shed light on the microstructures and phase transformation pathways. Finer control on the temperature, electron irradiation profile, and imaging detector could eventually lead to real-time observation of ice nucleation in water and address long-standing questions in the nucleation pathways.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Fluorination and reduction of CaCrO 3 by topochemical methods

Topochemical reactions between CaCrO 3 and polyvinylidene difluoride yield the new fluorinated phase CaCrO 2.5 F 0.5 , which was characterized by powder synchrotron X-ray diffraction, X-ray photoemission spectroscopy, and magnetic susceptibility measurements. The reaction proceeds via reduced oxide intermediates, CaCrO 2.67 and CaCrO 2.5 , in which CrO 6 octahedral and CrO 4 tetrahedral layers are stacked in a different manner along the c axis of CaCrO 3 . These two intermediate phases can be selectively synthesized by the carbothermal reduction with g-C 3 N 4. Both CaCrO 3 and CaCrO 2.5 F 0.5 adopt the same orthorhombic space group, Pbnm ; however, the fluorinated phase has decreased Cr–O–Cr bond angles as compared to the parent compound in both the ab plane and along the c -direction, which indicates an increased orthorhombic distortion due to the fluorination. Overall, while the oxygen vacancies are ordered in both intermediate phases, CaCrO 2.67 and CaCrO 2.5 , a site preference for fluorine in the oxyfluoride phase cannot be confirmed. CaCrO 3 and CaCrO 2.5 F 0.5 undergo antiferromagnetic phase transitions involving spin canting, where the fluorination causes the transition temperature to increase from 90 K to 110 K, as a result of the competition between the increased octahedral tilting and the enhancement of superexchange interactions involving Cr 3+ ions in the CaCrO 2.5 F 0.5 structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Methodology for determining optimal milling parameters for low-taper microtensile sample production

Femtosecond lasers are beginning to see an increase in interest for industrial and high throughput microsample milling applications. Despite this, much of the literature regarding removal rate studies for ultrashort pulse laser milling continues to focus on single-pulse or similar experiments that have a very small time on target. The material volume removal rates of femtosecond milling can vary wildly depending on parameters like laser scan speed, hatch spacing, z-axis step size, and pulses on the material. Currently, there is no established methodology for determining the optimal values of these parameters for micromilling applications. This methodology was developed in this study. The methodology consists of a pulse study, a repeat study, and a z-step study that will return the milling parameters that resulted in the largest volume removal rate for the laser used for this research. The methodology was created for the laser system used in this study, and was tested on 316 Stainless Steel, but was developed in such a way that it may be adapted to any material, and with some tweaking of variables might be used in other laser systems. The laser system used in this study utilizes a novel positioning stage that introduces 6 degrees of freedom to the translation of laser samples, being able to tilt and move in all three axes. Using both the developed methodology and the unique capabilities of the laser microtensile samples were produced with taper angles of <1° in 316 Stainless Steel.

Barker, Zachary Wayne↗
DOE OSTI2020

Error field correction strategies in preparation to MAST-U operation

In magnetic fusion devices, unwanted non-axisymmetric magnetic field perturbations, known as error fields (EF), can have detrimental effects on plasma stability and confinement. Such EFs may originate from several sources, such as axi-symmetric coil misalignments, coil feeds, 3D structures in the wall surrounding the plasma, presence of ferromagnetic materials near the plasma surface, blanket materials in future devices. To minimize their impact on plasma performance and on the available operational space, it is important to identify the EF sources and develop EF control strategies. MAST Upgrade (MAST-U) is a spherical tokamak which will operate in the near future after a series of enhancements from the previous MAST experiment. To deliver a machine with EF amplitude low enough to allow a high quality experimental programme, systematic analysis of the intrinsic EF sources has been carried out for poloidal eld (P) and divertor (D) coils. To deliver a machine with EF amplitude low enough to allow a high quality experimental programme, systematic analysis of the intrinsic EF sources has been carried out for poloidal field (P) and divertor (D) coils, whose magnetic eld measurements were available when writing this paper. Such measurements reveal that P and D coils are 3D deformed and thus are responsible for intrinsic EFs, with mainly n=1 and n=2 toroidal mode numbers. In preparation to MAST-U operation, both passive and active EF control strategies have been adopted for n=1 and n=2 EFs compensation. Passive EF control consisted of installing finely each D and P coil within MAST-U device so as to minimize the intrinsic n=1 EF amplitude. The optimal coil alignment has been determined based on magnetic eld measurements and the corresponding 3D electro-magnetic modelling, and envisaged coil shift and tilt of 3.2 mm and 0.7 mrad, respectively, in the case of P coil named P4. Conversely, active control will be use during MAST-U operation to reduce the n=2 EF which is associated mainly with P4 and P5, as well. Since these coils have been re-used from the MAST device, studies attempting n=2 EF control, based on MAST plasmas, have been modelled utilizing the MARS-F code to interpret experimental results in MAST and to give hints for future n=2 EF control studies in MAST-U. Here, a model-based control set for n=2 EF control has been identified which would allow for the minimization of rotation braking, of the resonant magnetic field at the q=2 and of the plasma displacement in MAST-U, simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗