Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY-LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

OCEANFILMS (Organic Compounds from Ecosystems to Aerosols: Natural Films and Interfaces via Langmuir Molecular Surfactants) sea spray organic aerosol emissions – implementation in a global climate model and impacts on clouds

Sea spray aerosol is one of the major sources of atmospheric particulate matter globally. It has increasingly been recognized that organic matter derived from ocean biological precursors contributes significantly to the composition of submicron sea spray and may modify sea spray aerosol impacts on clouds and climate. This paper describes the implementation of the OCEANFILMS (Organic Compounds from Ecosystems to Aerosols: Natural Films and Interfaces via Langmuir Molecular Surfactants) parameterization for sea spray organic aerosol emissions in a global Earth system model, the Energy Exascale Earth System Model (E3SM). OCEANFILMS is a physically based model that links sea spray chemistry with ocean biogeochemistry using a Langmuir partitioning approach. We describe the implementation details of OCEANFILMS within E3SM, compare simulated aerosol fields with observations, and investigate impacts on simulated clouds and climate. Four sensitivity cases are tested, in which organic emissions either strictly add to or strictly replace sea salt emissions (in mass and number) and are either fully internally or fully externally mixed with sea salt. The simulation with internally mixed, added organics agrees reasonably well with observed seasonal cycles of organic matter in marine aerosol and has been selected as the default configuration of the E3SM. In this configuration, sea spray organic aerosol contributes an additional source of cloud condensation nuclei, adding up to 30 cm -3 to Southern Ocean boundary-layer cloud condensation nuclei concentrations (supersaturation = 0.1 %). The addition of this new aerosol source strengthens shortwave radiative cooling by clouds by -0.36 W m -2 in the global annual mean and contributes more than -3.5 W m -2 to summertime zonal mean cloud forcing in the Southern Ocean, with maximum zonal mean impacts of about -4 W m -2 around 50–60°S. This is consistent with a previous top-down, satellite-based empirical estimate of the radiative forcing by sea spray organic aerosol over the Southern Ocean. Through its mechanistic approach, OCEANFILMS offers a path towards improved understanding of the feedbacks between ocean biology, sea spray organic matter, and climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Application of PRIM for understanding patterns in carbon dioxide model-observation differences

Reducing uncertainties in regional carbon balances requires a better understanding of CO 2 transport in synoptic weather systems. Here, we apply the Patient Rule Induction Method (PRIM), a data-mining method to identify high-density regions for a target-class within an input parameter space, to airborne observations of potential temperature, wind speed, water vapor mixing ratio, and CO 2 dry mol fraction gathered during the Atmospheric Carbon and Transport (ACT)-America Summer 2016 and Winter 2017 campaigns. ACT observations were targeted at expert-designated cases of fair weather and near-frontal warm and cold sector air at atmospheric boundary-layer, lower-, and higher free tropospheric levels (ABL, LFT, and HFT, respectively). We investigate atmospheric characteristics of these pre-defined cases and associated CO 2 model-observation-differences in the mesoscale WRF-Chem model. PRIM results separate winter- and summertime observations as well as observations from ABL, LFT, and HFT with enrichment factors of 4.0–20.5 inside the PRIM box compared to the entire dataset but cannot distinguish between near-frontal warm and cold sector observations in the higher free troposphere. Analyzing of the parameter space constrained by PRIM, we find that large magnitude model observation differences preferentially associated with times when atmospheric conditions are less typical. This association suggests that PRIM could provide a useful tool for isolating atmospheric conditions with large-magnitude and non-Gaussian CO 2 -residuals for targeted transport model evaluation and to potentially improve inversion results during synoptically active periods.

Gerken, Tobias [James Madison Univ., Harrisonburg,↗
DOE OSTI2026

Emerging low-cloud feedback and adjustment in global satellite observations

From mid-2003 to mid-2024, a global decrease in low-cloud amount enhanced the absorption of solar radiation by 0.22±0.07 W m −2 per decade (±1σ range), accelerating the energy imbalance trend during that period (0.44 W m −2 per decade). Through controlling factor analysis, here we show that the low-cloud trend is due to a combination of cloud feedback and adjustments to greenhouse gases and aerosols (respectively 0.09±0.02, 0.05±0.03, and 0.03±0.03 W m −2 per decade), which jointly account for 74 % of the trend. The contribution of natural climate variability is weak but uncertain (0.01±0.08 W m −2 per decade), owing to a poorly constrained trend in boundary-layer inversion strength. Importantly, the observed low-cloud radiative trend lies well within the range of values simulated by contemporary global climate models under conditions close to present day. Any systematic model error in the representation of present-day global energy imbalance trends is thus likely to originate in processes unrelated to low clouds.

Geosciences↗
DOE OSTI2026

A robust aerosol impact on clouds along the subtropical to tropical transition

Marine clouds undergo a transition from subtropical stratocumulus (Sc) to shallow cumulus (Cu) and eventually to deep convective (DC) systems as air masses advect from the subtropics towards the deep tropics. How aerosols modulate this Lagrangian cloud evolution remains largely uncertain. Here we use both 5 years of satellite observations mapped along 8 d Lagrangian trajectories and complementary large-eddy simulations from 9 initiation locations across the Northeast Pacific, Southeast Pacific, and Southeast Atlantic. This Lagrangian framework allows us to quantify the aerosol effect and its co-variability with meteorological conditions on cloud microphysics, macrophysics, and top-of-atmosphere radiation through the full Sc-Cu-DC transition. We show that increasing aerosol concentrations leads to deeper and more reflective clouds throughout this cloud transition. Examining the thermodynamic evolution along the trajectory indicates a well-known trend: enhanced moistening near the boundary-layer top and lower free troposphere under polluted conditions, suggesting that part of the co-variability between aerosol and meteorological conditions may be internally driven. The agreement between model simulations and satellite data alongside the multi-basin coherence of the results indicates that aerosols systematically amplify cloud depth and reflectivity during the subtropical–to–tropical cloud transition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

QES-Plume v1.0: a Lagrangian dispersion model

Low-cost simulations providing accurate predictions of transport of airborne material in urban areas, vegetative canopies, and complex terrain are demanding because of the small-scale heterogeneity of the features influencing the mean flow and turbulence fields. Common models used to predict turbulent transport of passive scalars are based on the Lagrangian stochastic dispersion model. The Quick Environmental Simulation (QES) tool is a low-computational-cost framework developed to provide high-resolution wind and concentration fields in a variety of complex atmospheric-boundary-layer environments. Part of the framework, QES-Plume, is a Lagrangian dispersion code that uses a time-implicit integration scheme to solve the generalized Langevin equations which require mean flow and turbulence fields. Here, QES-Plume is driven by QES-Winds, a 3D fast-response model that computes mass-consistent wind fields around buildings, vegetation, and hills using empirical parameterizations, and QES-Turb, a local-mixing-length turbulence model. In this paper, the particle dispersion model is presented and validated against analytical solutions to examine QES-Plume’s performance under idealized conditions. In particular, QES-Plume is evaluated against a classical Gaussian plume model for an elevated continuous point-source release in uniform flow, the Lagrangian scaling of dispersion in isotropic turbulence, and a non-Gaussian plume model for an elevated continuous point-source release in a power-law boundary-layer flow. In these cases, QES-Plume yields a maximum relative error below 6 % when compared with analytical solutions. In addition, the model is tested against wind-tunnel data for a uniform array of cubical buildings. QES-Plume exhibits good agreement with the experiment with 99 % of matched zeros and 59 % of the predicted concentrations falling within a factor of 2 of the experimental concentrations. Furthermore, results also emphasize the importance of using high-quality turbulence models for particle dispersion in complex environments. Finally, QES-Plume demonstrates excellent computational performance.

58 GEOSCIENCES↗
DOE OSTI2026

Results of the second Ice Shelf–Ocean Model Intercomparison Project (ISOMIP+)

Ocean-driven basal melting of Antarctic ice shelves plays an important role in the mass loss of the Antarctic Ice Sheet. Ice shelf cavity-resolving ocean models are a valuable tool for understanding ice shelf-ocean interactions and for simulating projections of ice shelf and ocean states under future climate. Designed to assess the current state of ice shelf–ocean modelling, the second Ice Shelf–Ocean Model Intercomparison Project, ISOMIP+, consists of 12 ocean model configurations submitted with a common, idealised experimental setup. Here, we focus on the experiments Ocean0–2 (Asay-Davis et al., 2016), which are ocean models with idealised, static ice shelf geometries, but where the ocean reaches a balance with prescribed far-field ocean conditions. Different thermal transfer coefficient values (ranging from 0.011 to 0.2) are used for each model in the melting parameterisation to achieve a common, tuned melt rate since the models cover a range of types of vertical coordinates, ice–ocean boundary layer treatments, and numerical schemes. These model differences lead to spread in the resultant ocean properties, circulation, boundary-layer structure and spatial distribution of melting. We also highlight similarities between models, such as a shared linear relationship across most models between melt rate and overturning and barotropic streamfunctions during the spin-up and spin-down, demonstrating a robust relationship between melt and circulation across models and forcing conditions. The ISOMIP+ results provide a systematic comparison of ice shelf cavity-capable ocean models. However, we also demonstrate the need for realistic ice shelf–ocean model intercomparison projects (some already underway) to assess model biases and inter-model variation against sparse observations. Further research is needed to understand the differences between models and further improve our modelled representations of the ice–ocean boundary layer and ice shelf cavity circulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A total of 19 months of daily weather logging on the US east coast: the WFIP3 event log

The Third Wind Forecast Improvement Project (WFIP3) is a multi-institutional field campaign designed to advance the understanding and prediction of the offshore atmospheric boundary layer along the US east coast. Extending from February 2024 through August 2025, WFIP3 combines long-term coastal and offshore measurements with targeted modeling and forecasting efforts. This data paper presents the WFIP3 event log, a curated record of 578 d of meteorological phenomena and field observations that complements the campaign's extensive high-frequency datasets. The event log provides both manually documented daily weather discussions and automatically derived indicators of atmospheric processes – including low-level jets, wind ramps, extreme wind veer, and weak wind conditions – based on observations from scanning lidars deployed at three coastal and offshore sites. The dataset offers structured metadata, standardized time and site identifiers, and consistent terminology to facilitate its integration with WFIP3's observational and modeling data products. The log supports diverse applications, from model evaluation and forecast verification to the selection of case studies on offshore boundary-layer dynamics. The WFIP3 event log is publicly available through the US Department of Energy's Wind Data Hub, providing the research community with a transparent and enduring contextual reference for the interpretation and use of WFIP3 measurements.

17 WIND ENERGY↗
DOE OSTI2023

TRACER-Sonde Ozonesonde and radiosonde data

The TRACER-Sonde campaign used electrochemical cell ozonesondes to measure vertical profiles of ozone, which can be a tracer for convective mixing, in conjunction with meteorological variables measured by a radiosonde. There were 32 days in which TRACER-Sonde had twice-daily ozonesondes from the TRACER M1 site at La Porte at ~11Z and ~15Z (6 am and 10 am LT). The ozonesonde profiles provide an additional method to validate boundary-layer height determinations and test assumptions about vertical mixing in pre-convective environments. There are six additional days with ~15Z radiosonde only (no ozone data) profiles.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

NPFTURBULENCE: Turbulent Parameters by airborne measurements

The original data were collected during the field campaign of “Turbulent layers promoting New Particle Formation” experiment (NPFTURBULENCE; https://www.arm.gov/research/campaigns/aaf2024npfturbulence) over the Atmospheric Radiation Measurement (ARM) user facility's Southern Great Plains (SGP) atmospheric observatory (https://www.arm.gov/capabilities/observatories/sgp ) in north-central Oklahoma. The ARM Aerial Facility ArcticShark uncrewed aerial system (UAS, https://www.arm.gov/capabilities/observatories/aaf/uas) was based at Blackwell–Tonkawa Municipal Airport (IATA: BWL, ICAO: KBKN, FAA LID: BKN, 36.74475° N, 97.34918° W, 313.9 m MSL), for the field campaign from May 5 through May 29, 2024. The ArcticShark UAS performed 11 flights, including 10 research flights over the Central Facility of the ARM SGP to measure atmospheric state, turbulence, surface IR temperature and imagery, and aerosol number concentration and size distribution. The current data set presents a comprehensive collection of turbulent parameters in the atmospheric boundary layer or lower free troposphere based on airborne measurement throughout the field campaign. The primary instruments used to create the current data set were the Aircraft Integrated Meteorological Measurement System (AIMMS-30) and the fine-wire thermocouple probe. For user convenience, the current data set includes several parameters commonly used in turbulent research for normalization and/or scaling: atmospheric boundary-layer height, surface conditions, convective scales for temperature, and velocity, etc.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Radar and lidar based cloud type product at the ARM ENA observatory

Following methods outlined in Remillard et al. (2012), we classify seven cloud types using radar reflectivity, best-estimated cloud base, and cloud-layer product from the Active Remotely Sensed Cloud Locations (ARSCL) product (Kollias et al. 2007). A cloud mask is created based on the detectable radar reflectivity (>-40 dBZ) combined with the best-estimated cloud base height. Each cloud object is analyzed individually as contiguous cloudy pixels, and its type is determined based on the cloud’s boundaries and duration. Focusing on marine boundary-layer clouds, low clouds are further classified into four types: shallow cumulus, broken stratocumulus (Sc) or cumulus clouds, single-layer Sc, and multi-layer Sc or Sc coupled with cumulus. The remaining three categories are middle clouds, high clouds, and deep convective clouds. For detailed definition of each cloud type, please refer to Zheng et al. (2024).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Profiles of Radiative Fluxes at ENA

Profiles of radiative fluxes observed at the Atmospheric Radiation Measurement (ARM)’s Eastern North Atlantic (ENA) observatory along with the ancillary measurements are reported. The below-cloud drizzle properties were derived by combining the data from the ceilometer and Ka-band ARM Zenith Radar (KAZR) following the technique explained by Ghate et al. (2021 JAMC). The cloud and drizzle water path values were derived from the brightness temperatures reported by the microwave radiometer following the technique of Cadeddu et al. (2020 AMT). The cloud water path was then scaled to the KAZR-reported radar reflectivity to calculate profiles of liquid water content (LWC). Following the analysis from Ghate et al. (2023 JGR), cloud droplet effective radius was calculated using the number concentration value of 100 cm-3. The cloud properties, along with the thermodynamic properties, served as an input to the Rapid Radiative Transfer Model (RRTM) to yield profiles of radiative fluxes at a 1-minute temporal and 50-m vertical resolution. The fluxes were then averaged to hourly temporal resolution for analysis. In Mitra et al. (2025 JClim), the calculated profiles were compared against those derived from the satellite measurements (SYN1deg). Flux profiles from the SYN1deg and the thermodynamic and cloud properties used for deriving them are also reported here. Both all-sky and clear-sky radiative flux profiles were calculated. Due to the large data volume, the surface and top-of-atmosphere (TOA) radiative fluxes for the six-year period, and the hourly profiles of the radiative fluxes for January 2018, are submitted here. Full profiles of radiative fluxes calculated from the thermodynamic and cloud properties measured at the ENA site at 1-minute temporal and 50-m vertical resolution for a six-year period are available from the authors. Six files here correspond to the following data: 1_ENARAD_CERES_with_cld_amount_timeseries.nc: Time-series of hourly values of RRTM-simulated values of upwelling and downwelling fluxes at the surface and TOA, observed boundary-layer cloud fractions, and upwelling and downwelling fluxes from the SYN1deg from July 2015 to January 2022. 2_CERES_2018_at_CERES_levels.nc: SYN1deg radiative fluxes at six levels for the year 2018. 3_ENARad_2018_at_CERES_levels.nc: RRTM calculated fluxes at the SYN1deg vertical levels for the year 2018. 4_ENARad_rrtminputs_hourly_201801.nc: Thermodynamic and cloud properties used as an input to the RRTM for January 2018. 5_CERES_inputs_hourly_201801.nc: Thermodynamic and cloud properties utilized by SYN1deg algorithm for January 2018. 6_ENARAD_hourly_201801.nc: Full profiles of hourly averaged radiative fluxes from the RRTM simulations for January 2018.

Atmosphere↗
DOE OSTI2026

Wind and Temperature Consensus at Horn Point, HU-Beltsville, Piney Run (Maryland) in support of CoURAGE

The Maryland Department of the Environment (MDE) operates a ground-based atmospheric profiling network consisting of collocated radar wind profilers (RWP) and radio acoustic sounding systems (RASS) as part of its Ambient Air Monitoring Program. This network provides continuous observations of wind and temperature structure in the lower troposphere to support air quality forecasting, regulatory analysis, and atmospheric research. The network currently includes three fixed sites across Maryland: Horn Point (HP, lower eastern shore) [38.587525°,-76.141006°], Howard University-Beltsville (HUB, central Maryland) [39.055277°, -76.878632°], and Piney Run (PR, western Maryland) [39.705950°, -79.012000°] The network is designed to capture regional variability in atmospheric transport and boundary-layer processes. These systems measure vertical profiles of horizontal wind speed and direction using Doppler radar techniques, with observations typically spanning from ~100 m above ground level up to approximately 2.5–4 km. Measurements are derived from the Doppler shift of backscattered electromagnetic signals, enabling retrieval of wind vectors at multiple altitudes with high temporal resolution (e.g., 30-minute averages reported every 6 minutes). Each radar wind profiler is paired with a Radio Acoustic Sounding System (RASS) to provide profiles of virtual temperature in the lower atmosphere (~100–200 m AGL) by measuring the propagation speed of acoustic waves. Together, the RWP/RASS system yields a coupled data set of thermodynamic and kinematic atmospheric structure, including additional parameters such as vertical velocity, radial velocity, signal-to-noise ratio, and spectral width for advanced analysis. There are two types of files for each station: wind data (files with a "w" prefix) and virtual temperature RASS data (files with a "t" prefix). The wind data files are in the format wYYDDD.cns, where YY is the 2-digit year and DDD is the day of the year. The RASS virtual temperature data files are in the format tYYDDD.cns. Each record has the following header structure: Line 1 : Station Name RASS files Line 2 : RASS rev DeTect_2.0, WINDS files Line 2 : WINDS rev ATI 5.1 Line 3 : N latitude, W longitude, and site elevation (m) Line 4 : Date and begin time of consensus: yy mm dd hh mn ss plus # minutes to add to get UTC Line 5 : Consensus averaging time (minutes); number of beams; number of range gates Line 6 : Number of records required to make consensus (num) total number of records (tot) and the consensus window size (m/s) in the format: num:tot (window) RASS files Line 7 : no. of coded cells, no. of spec, pulse width (ns), and inter-pulse period (µs), WINDS files Line 7 : No. of coded cells, no. of spectra, pulse width (ns), and inter-pulse period (µs), each with a pair of values: first value is for oblique beams, second for vertical RASS files Line 8 : Full scale Doppler value (m/s) Delay to first gate (ns) Number of gates Spacing of gates (ns), WINDS files Line 8 : Full scale Doppler velocity (m/s), oblique and vertical Vertical correction applied to oblique beams? (0 = no, 1 = yes) Delay to first gate (ns), oblique and vertical Number of gates, oblique and vertical Spacing of gates (ns), oblique and vertical Line 9 : Azimuth and elevation (9s indicate vertical beam not used) RASS files Line 10, values : HT = Height above ground (km), T = Uncorrected virtual temperature consensus (deg C), Tc = Corrected virtual temperature consensus (deg C), W = Vertical wind consensus (9s indicate vertical beam not used, w-component, positive upward, m/s), CNT = Number of records that made consensus (for the 3 values in same order), SNR = Average signal to noise ratio (dB) of records in consensus (same order) WINDS files Line 10, values : HT = Height above ground (km), SPD = Wind speed (m/s), DIR = Wind direction (deg E of N from N), RAD = Radial velocities for each beam (m/s) in order given in azimuth and elevation line (positive toward radar; 9s indicate vertical beam not used, CNT = Number of records that made consensus, SNR = Average signal to noise ratio (dB) of records in consensus

{"wind speed and direction",temperature}↗
DOE OSTI2026

CAPE-K_ISO: Water vapor isotopic measurements from Western Tasmania

This dataset provides processed 1-minute water vapor isotope observations from the Water Vapor Isotopic Measurements During CAPE-K project at the Kennaook/Cape Grim Baseline Air Pollution Station in northwestern Tasmania. Measurements were made with a Picarro L-2130 cavity ring-down spectroscopy analyzer during the CAPE-K deployment. The dataset includes water vapor mixing ratio, d18O, dD, deuterium excess, and propagated 1-sigma uncertainties. Isotope ratios are calibrated to the VSMOW/SLAP scale. Calibration intervals, transition periods, and obvious isotope outliers have been removed. The processed record spans 11 June 2024 to 15 October 2025 and is intended for studies of Southern Ocean marine boundary-layer moisture, isotope variability, air-sea exchange, and cloud and precipitation processes.

Water Vapor Isotopic Composition↗
DOE OSTI2026

Tethered Balloon Observations of Vertically Resolved Aerosol Size Distributions during the U.S. DOE ARM CoURAGE and BNF Campaigns

This dataset contains vertically resolved aerosol particle number size distributions measured using a miniature Scanning Electrical Mobility Spectrometer (mSEMS) deployed aboard the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Tethered Balloon System (TBS) during the 2025 Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) and Bankhead National Forest (BNF) field campaigns. The mSEMS measured aerosol size distributions over approximately 10–300 nm during repeated TBS vertical profiles through the atmospheric boundary layer. The dataset provides measurements of particle number size distributions as a function of particle diameter, altitude, and time and supports investigation of aerosol vertical structure, elevated ultrafine and Aitken-mode particle layers, boundary-layer evolution, and residual-layer processes.

ARM↗
DOE OSTI2024

Identification of Climatological Representative Days in the Mid-Atlantic for High-Fidelity Offshore Wind Energy Modeling

The goal of reaching 30 GW of offshore wind energy by 2030 becomes more realistic with the continued approval of offshore wind energy areas by the Biden Administration. In the Mid-Atlantic, where wind energy projects are in the most advanced stages of development, there is increased research focus on the eventual interaction of these wind farms. These interactions, in the form of wakes and cluster wakes, or wakes from multiple wind farms, could have detrimental effects on power production and forecastability for downwind wind farms (Pryor et al. 2022, Golbazi et al. 2022, Rosencrans et al. 2023). To help alleviate these issues, numerical simulations in the form of numerical weather prediction (NWP) and large eddy simulations (LES) can provide insight into when cluster wake situations may occur, but running such simulations can be expensive and difficult to run for multiple years. In this study, we leverage and build upon existing techniques in the literature (Fischereit et al. 2022) to identify climatologically representative days for wind energy areas in the Mid-Atlantic where conditions would promote cluster wake situations. We select meteorological variables (wind speed, wind direction, atmospheric stability, boundary-layer height, TKE) critical to understanding wind energy production and wake propagation. We then consider two different NWP datasets of varying spatial and temporal resolution: ERA5 provides data at hourly intervals from 1940 to present at 0.25 deg (31 km) spatial resolution (Hersbach et al. 2020), and the NOW-23 dataset provides data at 5-minute resolution for 21 years at 2-km spatial resolution (Bodini et al. 2020). Our first step is to compare these two datasets for an overlapping 21-year time period. Initial results show that the required number of days to represent the long-term climate increases with each additional variable considered. In their study of the German Bight, Fischereit et al. (2022) found that they could represent the long-term wind and wave climate in a "near-perfect" way with -180 days, by reaching a Perkins Skill Score (PSS) of 0.9; our investigation of the mid-Atlantic wind resource region with ERA5 and NOW-23 data suggests that we will need -100 days to reach a PSS of 0.9. As we expand our parameter space to include multiple variables, the number of required days will likely grow. These results will ultimately be used to select case studies to best represent cluster wake conditions that apply to this region for the lifetime of likely wind farms in this mid-Atlantic region.

clusterwakes↗
DOE OSTI2021

Study of Stratus-Lowering Marine-Fog Events Observed During C-FOG

Two stratus lowering marine fog events observed on 28 September and 04 October 2018 during the Coastal Fog (C-Fog) field campaign that took place offshore of Eastern Canada during 1 September to 6 October 2018 are described. In-situ, profiling and remote sensing observations were made at selected land sites in eastern Newfoundland (NL) and Nova Scotia (NS) as well as aboard the research vessel (R/V) Hugh R. Sharp that cruised in adjoining coastal waters. Synoptic scale analysis showed that both fog episodes were an outcome of the interaction between synoptic-scale surface level low-pressure systems and a contiguous high-pressure system. At the same time, back trajectories revealed that the bulk of the fog layer is formed due to differential advection. Here, the diameter of the fog droplets at the surface gradually decreased from the centre of the fog layer to its leading/trailing edges. The bimodal fog droplet diameter distribution with peaks at 5-10 µm and 20-25 µm provided clues on droplet collision and coalescence processes. The observed difference between microphysical variables and droplet distribution between the two fog events and within same fog layer may have been governed by atmospheric boundary layer conditions (e.g., humidity conditions and turbulence) prevailed in the fog layer. Overall, it is concluded that the life cycle of observed stratus-lowering coastal-fog episodes is dependent on synoptic conditions as well as atmospheric boundary layer characteristics such as stability, cloud top cooling and entrainment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Investigation of Isobaric Mixing as a Mechanism for Boundary‐Layer Cloud Formation

This study investigates the potential role of isobaric mixing in the formation of marine boundary layer clouds. Cloud formation theory emphasizes uplift and adiabatic cooling, but recent observations support the existence of small clouds forming at various altitudes, even below the lifting condensation level. Isobaric mixing of air with different thermodynamic properties can generate localized supersaturation. A Gaussian mixing model is employed to simulate this process, considering the correlation between temperature and water vapor. Cloud droplet size distributions from aircraft measurements show a persistent and prominent mode of small droplets at 9 m, and the size of this mode compares favorably with predictions from the model. The results suggests that isobaric mixing plausibly contributes to the formation of clouds, particularly those observed at multiple altitudes with narrow droplet size distributions. This finding highlights the importance of considering isobaric mixing processes in understanding and modeling cloud formation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Resolving Low Cloud Feedbacks Globally With E3SM High‐Res MMF: Agreement With LES but Stronger Shortwave Effects

This study investigates low cloud feedback in a warmer climate using global simulations from the High-Resolution Multi-scale Modeling Framework (HR-MMF), which explicitly simulates small-scale eddies globally. Two 5-year simulations—one with present-day sea surface temperatures (SSTs) and a second with SSTs warmed uniformly by 4 K—reveal a positive global shortwave cloud radiative effect (SWCRE = 0.3 W/m 2 /K), comparable to estimates from CMIP models. As the climate warms, significant reductions in low cloud cover occur over stratocumulus regions. This study is the first attempt to compare HR-MMF results with predictions from idealized large-eddy simulations from the CGILS intercomparison. Despite different underlying assumptions, we find qualitative agreement in SWCRE and inversion height changes between HR-MMF and CGILS predictions. This suggests reasonable credibility for the CGILS framework in predicting cloud responses under the out-of-sample conditions found in HR-MMF. However, the HR-MMF exhibits stronger SWCRE changes than predicted by CGILS. We explore potential causes for this discrepancy, examining variations in cloud-controlling factors (CCFs) and cloud conditions. Our results show a fairly homogeneous SWCRE response, with little systematic variation tied to the variations in CCFs. This reveals a dominant role for SST forcing in modulating SWCRE.

boundary-layer clouds↗