Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHO Cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Triggering C-N Coupling on Metal Oxide Nanocomposite for the Electrochemical Reduction of CO 2 and NO x ⁻ to Formamide

The co-electroreduction of CO 2 and NO x ⁻ (NO 3 ⁻ /NO 2 ⁻ ) to generate formamide (HCONH 2 ) offers an opportunity for downstream chemical and polymer manufacturing decarbonization; however, significant challenges lie in the C-N coupling and the associated low product selectivity. Herein, p-block metal oxides are incorporated in copper oxides to provide more accessible active sites for reactant adsorption and activation, tuning the reaction selectivity toward the formamide production. Through in situ Raman and synchrotron-based infrared spectroscopy measurements, C-N bond formation is demonstrated in real-time with the CuO x /BiO x catalyst, where the C-N bond is detected via a *CHO and *NH 2 intermediates formation, in agreement with the density functional theory calculations. When tested in a flow electrolyzer, a formamide yield rate of 134 ± 11 mmol h -1 g cat -1 is reported, the first report of co-electroreduction of CO 2 and NO x ⁻ to formamide beyond conventional H-cell measurements. These new insights on the C-N coupling mechanisms and scale-up capability provide directions for further development of electrocatalysts for the formamide production.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pressure-Tolerant 3D Anodes Enable Short-Circuit Prevention and Low Heat Generation in Argyrodite Solid-State Batteries

Solid-state batteries (SSBs) offer a safer, higher-energy-density alternative to lithium-ion batteries, yet commercialization is hindered by incompatibility with lithium metal. Here, to overcome these challenges, we developed a cost-effective, commercially available prelithiated micro carbon fiber framework (Li-Cf) anode featuring a high-pressure-tolerance, for use with argyrodite solid-state electrolytes (SSEs). This 3D structure accommodates uniform lithium deposition, simplifies cell assembly under elevated pressure, inhibits dendrite growth toward SSEs, reduces heat generation, and enhances overall compatibility. Notably, our architecture enables the cell to tolerate pressures up to 400 MPa without short-circuiting during assembly. Meanwhile, the 3D framework serves as a preferential pathway for lithium deposition, thereby reducing lithium growth toward the SSEs and mitigating the risk of dendrite formation in SSEs. Operando calorimetry and distribution of relaxation times analysis reveal that lithium morphology degradation at the interface with the SSEs is a key failure mechanism in lithium metal argyrodite SSBs, leading to increased diffusion resistance and heat generation. In contrast, the Li-Cf anode mitigates these issues by reducing both heat flux and charge transfer resistance. Full cells with LiNi 0.8 Co 0.1 Mn 0.1 O 2 /Li 6 PS 5 Cl/Li-Cf retain ~79% capacity after 600 cycles, demonstrating significantly improved cycling stability and strong potential for practical energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Bulk‐Heterojunction Electrocatalysts in Confined Geometry Boosting Stable, Acid/Alkaline‐Universal Water Electrolysis

Abstract Alkaline water splitting electrocatalysts have been studied for decades; however, many difficulties remain for commercialization, such as sluggish hydrogen evolution reaction (HER) kinetics and poor catalytic stability. Herein, by mimicking the bulk‐heterojunction morphology of conventional organic solar cells, a uniform 10 nm scale nanocube is reported that consists of subnanometer‐scale heterointerfaces between transition metal phosphides and oxides, which serves as an alkaline water splitting electrocatalyst; showing great performance and stability toward HER and oxygen evolution reaction (OER). Interestingly, the nanocube electrocatalyst reveals acid/alkaline independency from the synergistic effect of electrochemical HER (cobalt phosphide) and thermochemical water dissociation (cobalt oxide). From the spray coating process, nanocube electrocatalyst spreads uniformly on large scale (≈6.6 × 5.6 cm 2 ) and is applied to alkaline water electrolyzers, stably delivering 600 mA cm −2 current for >100 h. The photovoltaic‐electrochemical (PV‐EC) system, including silicon PV cells, achieves 11.5% solar‐to‐hydrogen (STH) efficiency stably for >100 h.

Chemistry↗
DOE OSTI2026

Dynamic operation and reaction network coupling in solid oxide electrochemical reactors

Solid oxide cells have traditionally been confined to operation as standalone electrolyzers or fuel cells, with research predominantly focused on materials performance. Here, this Comment highlights opportunities to leverage integrated faradaic and non-faradaic reactions alongside dynamic operation in these electrochemical membrane reactors to maximize energy utilization and expand product scope.

Cho, Yoon Jin [University of Michigan, Ann Arbor, ↗
DOE OSTI2025

Reversible self-assembly of small molecules for recyclable solid-state battery electrolytes

Performance often overshadows recyclability in contemporary battery designs, leading to sustainability challenges. Preemptive strategies integrating recyclable chemistry from the outset are thus increasingly critical for addressing the complexities in conventional recycling. Here we harness bio-inspired molecular self-assembly to create inherently recyclable battery materials. We use aramid amphiphiles that self-assemble in water through strong, collective hydrogen bonding and π–π stacking, forming air-stable, high-aspect-ratio nanoribbons with gigapascal-level stiffness. When processed into bulk solid-state electrolytes, these nanoribbons retain their ordered molecular arrangement and exhibit total conductivities of 1.6 × 10 −4 S cm −1 at 50 °C, Young’s moduli of 70 MPa and toughness values of 1 MJ m −3 , despite being stabilized solely by reversible non-covalent bonds. We further demonstrate clean separation of battery components by exposing used cells to an organic solvent, which disrupts the non-covalent cohesion and reverts all battery components to their original forms. Furthermore, this study underscores the potential of molecular self-assembly for specialized recyclable designs in energy storage applications.

Batteries↗
DOE OSTI2024

Vaccination induces broadly neutralizing antibody precursors to HIV gp41

A key barrier to the development of vaccines that induce broadly neutralizing antibodies (bnAbs) against human immunodeficiency virus (HIV) and other viruses of high antigenic diversity is the design of priming immunogens that induce rare bnAb-precursor B cells. The high neutralization breadth of the HIV bnAb 10E8 makes elicitation of 10E8-class bnAbs desirable; however, the recessed epitope within gp41 makes envelope trimers poor priming immunogens and requires that 10E8-class bnAbs possess a long heavy chain complementarity determining region 3 (HCDR3) with a specific binding motif. We developed germline-targeting epitope scaffolds with affinity for 10E8-class precursors and engineered nanoparticles for multivalent display. Scaffolds exhibited epitope structural mimicry and bound bnAb-precursor human naive B cells in ex vivo screens, protein nanoparticles induced bnAb-precursor responses in stringent mouse models and rhesus macaques, and mRNA-encoded nanoparticles triggered similar responses in mice. Thus, germline-targeting epitope scaffold nanoparticles can elicit rare bnAb-precursor B cells with predefined binding specificities and HCDR3 features.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2002

The growing world of expansins

Expansins are cell wall proteins that induce pH-dependent wall extension and stress relaxation in a characteristic and unique manner. Two families of expansins are known, named alpha- and beta-expansins, and they comprise large multigene families whose members show diverse organ-, tissue- and cell-specific expression patterns. Other genes that bear distant sequence similarity to expansins are also represented in the sequence databases, but their biological and biochemical functions have not yet been uncovered. Expansin appears to weaken glucan-glucan binding, but its detailed mechanism of action is not well established. The biological roles of expansins are diverse, but can be related to the action of expansins to loosen cell walls, for example during cell enlargement, fruit softening, pollen tube and root hair growth, and abscission. Expansin-like proteins have also been identified in bacteria and fungi, where they may aid microbial invasion of the plant body.

NASA Discipline Plant Biology↗
DOE OSTI2021

A Mathematical Model of the Dynamics of Cytokine Expression and Human Immune Cell Activation in Response to the Pathogen Staphylococcus aureus

Cell-based mathematical models have previously been developed to simulate the immune system in response to pathogens. Mathematical modeling papers which study the human immune response to pathogens have predicted concentrations of a variety of cells, including activated and resting macrophages, plasma cells, and antibodies. This study aims to create a comprehensive mathematical model that can predict cytokine levels in response to a gram-positive bacterium, S. aureus by coupling previous models. To accomplish this, the cytokines Tumor Necrosis Factor Alpha (TNF-α), Interleukin 6 (IL-6), Interleukin 8 (IL-8), and Interleukin 10 (IL-10) are included to quantify the relationship between cytokine release from macrophages and the concentration of the pathogen, S. aureus, ex vivo. Partial differential equations (PDEs) are used to model cellular response and ordinary differential equations (ODEs) are used to model cytokine response, and interactions between both components produce a more robust and more complete systems-level understanding of immune activation. In the coupled cellular and cytokine model outlined in this paper, a low concentration of S. aureus is used to stimulate the measured cellular response and cytokine expression. Results show that our cellular activation and cytokine expression model characterizing septic conditions can predict ex vivo mechanisms in response to gram-negative and gram-positive bacteria. Our simulations provide new insights into how the human immune system responds to infections from different pathogens. Novel applications of these insights help in the development of more powerful tools and protocols in infection biology.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Hydroxyl Conducting Hydrogels Enable Low-Maintenance Commercially Sized Rechargeable Zn–MnO2 Batteries for Use in Solar Microgrids

Zinc (Zn)–manganese dioxide (MnO2) rechargeable batteries have attracted research interest because of high specific theoretical capacity as well as being environmentally friendly, intrinsically safe and low-cost. Liquid electrolytes, such as potassium hydroxide, are historically used in these batteries; however, many failure mechanisms of the Zn–MnO2 battery chemistry result from the use of liquid electrolytes, including the formation of electrochemically inert phases such as hetaerolite (ZnMn2O4) and the promotion of shape change of the Zn electrode. This manuscript reports on the fundamental and commercial results of gel electrolytes for use in rechargeable Zn–MnO2 batteries as an alternative to liquid electrolytes. The manuscript also reports on novel properties of the gelled electrolyte such as limiting the overdischarge of Zn anodes, which is a problem in liquid electrolyte, and finally its use in solar microgrid applications, which is a first in academic literature. Potentiostatic and galvanostatic tests with the optimized gel electrolyte showed higher capacity retention compared to the tests with the liquid electrolyte, suggesting that gel electrolyte helps reduce Mn3+ dissolution and zincate ion migration from the Zn anode, improving reversibility. Cycling tests for commercially sized prismatic cells showed the gel electrolyte had exceptional cycle life, showing 100% capacity retention for >700 cycles at 9.5 Ah and for >300 cycles at 19 Ah, while the 19 Ah prismatic cell with a liquid electrolyte showed discharge capacity degradation at 100th cycle. We also performed overdischarge protection tests, in which a commercialized prismatic cell with the gel electrolyte was discharged to 0 V and achieved stable discharge capacities, while the liquid electrolyte cell showed discharge capacity fade in the first few cycles. Finally, the gel electrolyte batteries were tested under IEC solar off-grid protocol. It was noted that the gelled Zn–MnO2 batteries outperformed the Pb–acid batteries. Additionally, a designed system nameplated at 2 kWh with a 12 V system with 72 prismatic cells was tested with the same protocol, and it has entered its third year of cycling. This suggests that Zn–MnO2 rechargeable batteries with the gel electrolyte will be an ideal candidate for solar microgrid systems and grid storage in general.

25 ENERGY STORAGE↗
DOE OSTI2025

Tunable n- and p-Type Behavior of Ruddlesden–Popper and Dion–Jacobson 2D Perovskites

Interfacial band alignment in two-dimensional (2D)/three-dimensional (3D) perovskite heterostructures is important for maximizing separation, extraction, and collection of charge carriers, which, in turn, stabilize the perovskite layer during solar cell operation. Despite the wide use of 2D spacer cations for stabilizing perovskite solar cells, spacer cation exchange across the 2D/3D interface induces structural transformation and degradation in performance and stability. We have now examined the electrochemical and photoelectrochemical behavior of 2D Ruddlesden–Popper (RP) and Dion–Jacobson (DJ) perovskites to assess the impact of binding configuration on the interfacial charge separation and their operational stability. In-situ open circuit potential (OCP) responses of 2D perovskites under light illumination, paired with redox couples (ferrocene/ferrocenium), reveal different semiconducting polarizabilities of BA-RP (n-type) and BDA-DJ (p-type). The tunability of the Fermi energy level in 2D perovskites discussed in this study offers insight into the design of 2D/3D interfaces for optimizing charge transfer and enhancing charge neutrality and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oxaliplatin–DNA Adducts as Predictive Biomarkers of FOLFOX Response in Colorectal Cancer: A Potential Treatment Optimization Strategy

FOLFOX is one of the most effective treatments for advanced colorectal cancer (CRC). However, cumulative oxaliplatin neurotoxicity often results in halting the therapy. Oxaliplatin functions predominantly via the formation of toxic covalent drug-DNA adducts. We hypothesize that oxaliplatin-DNA adduct levels formed in vivo in peripheral blood mononuclear cells (PBMC) are proportional to tumor shrinkage caused by FOLFOX therapy. We further hypothesize that adducts induced by sub-therapeutic "diagnostic microdoses" are proportional to those induced by therapeutic doses and are also predictive of response to FOLFOX therapy. These hypotheses were tested in CRC cell lines and a pilot clinical study. Four CRC cell lines were cultured with therapeutically relevant (100 µM) or diagnostic microdose (1 µM) concentrations of [ 14 C]oxaliplatin. The C-14 label enabled quantification of oxaliplatin-DNA adduct level with accelerator mass spectrometry (AMS). Oxaliplatin-DNA adduct formation was correlated with oxaliplatin cytotoxicity for each cell line as measured by the MTT viability assay. Six CRC patients received by IV a diagnostic microdose containing [ 14 C]oxaliplatin prior to treatment, as well as a second [ 14 C]oxaliplatin dose during FOLFOX chemotherapy, termed a "therapeutic dose." Oxaliplatin-DNA adduct levels from PBMC correlated significantly to mean tumor volume change of evaluable target lesions (5 of the 6 patients had measurable disease). Finally, oxaliplatin-DNA adduct levels were linearly proportional between microdose and therapeutically relevant concentrations in cell culture experiments and patient samples, as was plasma pharmacokinetics, indicating potential utility of diagnostic microdosing.

60 APPLIED LIFE SCIENCES↗
NASA NTRS2001

Spectroscopic detection of biological NO with a quantum cascade laser

Two configurations of a continuous wave quantum cascade distributed feedback laser-based gas sensor for the detection of NO at a parts per billion (ppb) concentration level, typical of biomedical applications, have been investigated. The laser was operated at liquid nitrogen temperature near lambda = 5.2 microns. In the first configuration, a 100 m optical path length multi-pass cell was employed to enhance the NO absorption. In the second configuration, a technique based on cavity-enhanced spectroscopy (CES) was utilized, with an effective path length of 670 m. Both sensors enabled simultaneous analysis of NO and CO2 concentrations in exhaled air. The minimum detectable NO concentration was found to be 3 ppb with a multi-pass cell and 16 ppb when using CES. The two techniques are compared, and potential future developments are discussed.

NASA Discipline Environmental Health↗
NASA NTRS2002

Regulation of root hair initiation and expansin gene expression in Arabidopsis

The expression of two Arabidopsis expansin genes (AtEXP7 and AtEXP18) is tightly linked to root hair initiation; thus, the regulation of these genes was studied to elucidate how developmental, hormonal, and environmental factors orchestrate root hair formation. Exogenous ethylene and auxin, as well as separation of the root from the medium, stimulated root hair formation and the expression of these expansin genes. The effects of exogenous auxin and root separation on root hair formation required the ethylene signaling pathway. By contrast, blocking the endogenous ethylene pathway, either by genetic mutations or by a chemical inhibitor, did not affect normal root hair formation and expansin gene expression. These results indicate that the normal developmental pathway for root hair formation (i.e., not induced by external stimuli) is independent of the ethylene pathway. Promoter analyses of the expansin genes show that the same promoter elements that determine cell specificity also determine inducibility by ethylene, auxin, and root separation. Our study suggests that two distinctive signaling pathways, one developmental and the other environmental/hormonal, converge to modulate the initiation of the root hair and the expression of its specific expansin gene set.

NASA Discipline Plant Biology↗
DOE OSTI2026

N -Terminal Octylated Peptoid Hydrogels as 3D-Printable Cell Scaffolds and Proteolytically Robust Cargo Depots

Supramolecular hydrogels that mimic the extracellular matrix (ECM) represent promising materials for tissue engineering and drug delivery. However, conventional hydrogels formed via the self-assembly of natural or synthetic building blocks often face a trade-off between biological functionality and biochemical stability, limiting their utility in long-term or protease-rich environments. Peptoids, a class of peptide-inspired, sequence-defined polymers, offer a compelling alternative due to their exceptional proteolytic resistance and bioactivity. Despite this potential, the development of supramolecular peptoid hydrogels has been hindered by the absence of backbone hydrogen bond donors, which limits long-range ordering necessary for efficient hydrogel formation. This work describes a short peptoid functionalized at the N-terminus with an octyl chain that readily self-assembles into hydrogels. Hydrophobic interactions among pendant octyl groups promote directional peptoid packing into highly ordered nanosheets, which interconnect to form a porous hydrogel network. These hydrogels exhibit tunable viscoelasticity, shear-thinning, and self-healing properties, enabling their use as inks for extrusion-based 3D printing. They support NIH-3T3 fibroblast adhesion, spreading, and proliferation, maintaining greater than 95% cell viability over 4 days. Moreover, the hydrogels retain their macroscopic integrity under protease-rich conditions, enabling sustained cargo release and uniform cellular uptake. Together, this study demonstrates a class of supramolecular peptoid hydrogelators that integrate biocompatibility, 3D printability, and proteolytic stability, providing a versatile platform for ECMmimetic scaffolds in regenerative medicine and long-term therapeutic delivery.

cargo delivery↗
DOE OSTI2020

Tumor Microenvironment Targeting Nano–Bio Emulsion for Synergistic Combinational X-Ray PDT with Oncolytic Bacteria Therapy

Various cancer therapies have been developed, but tumor recurrence with incomplete tumor killing and remaining tumor cells/tissues is frequent in monotherapies. Herein, a nano–bio therapeutic emulsion formulated with multifunctional nanoscintillators and anaerobic Clostridium novyi-NT spores for synergistic image-guided combinational cancer therapy is reported. MRI visible nanoscintillators (NSs) are synthesized with a NaGdF 4 :Tb,Ce@NaGdF 4 core/shell structure for an image-guided X-ray photodynamic therapy (PDT) of the normoxic peripheral tumor. An anaerobic oncolytic bacterium (C. novyi-NT) therapy is combined to treat the hypoxic central tumor tissues. Photosensitizer-coated NSs (PS-NSs) and C. novyi-NT spores are emulsified with clinically available ethiodized oil (Lipiodol) to be the nano–bio therapeutic emulsion and injected into the tumor with computed tomography image guidance. The distribution of nano–bio therapeutic emulsion, including PS-NSs and anaerobic C. novyi-NT spores in the tumor site, is confirmed by both X-ray and T1-weighted magnetic resonance imaging. Following the image-guided X-ray PDT and anaerobic C. novyi- NT combination treatment, apoptotic cell death in cancer tissues, including both peripheral and central tumor regions, is significantly higher than in the control groups. Finally, this combination therapy approach using a nano–bio therapeutic emulsion is expected to overcome the limitations of conventional cancer therapy, resulting in increased cancer-therapeutic efficacy.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1998

Chromatin conformation in living cells: support for a zig-zag model of the 30 nm chromatin fiber

A new method was used to probe the conformation of chromatin in living mammalian cells. The method employs ionizing radiation and is based on the concept that such radiation induces correlated breaks in DNA strands that are in spatial proximity. Human dermal fibroblasts in G0 phase of the cell cycle and Chinese hamster ovary cells in mitosis were irradiated by X-rays or accelerated ions. Following lysis of the cells, DNA fragments induced by correlated breaks were end-labeled and separated according to size on denaturing polyacrylamide gels. A characteristic peak was obtained for a fragment size of 78 bases, which is the size that corresponds to one turn of DNA around the nucleosome. Additional peaks between 175 and 450 bases reflect the relative position of nearest-neighbor nucleosomes. Theoretical calculations that simulate the indirect and direct effect of radiation on DNA demonstrate that the fragment size distributions are closely related to the chromatin structure model used. Comparison of the experimental data with theoretical results support a zig-zag model of the chromatin fiber rather than a simple helical model. Thus, radiation-induced damage analysis can provide information on chromatin structure in the living cell. Copyright 1998 Academic Press.

Non-NASA Center↗