SEARCH · Search NASA

Results for “Form factors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Z1/3/ contribution to the energy loss of heavy charged particles

The Z1(3) contribution of distant collisions to the average energy loss of heavy charged particles is obtained by extending Bethe's quantum-mechanical calculation to the next highest order in Z1. The second-order Born approximation for the inelastic-collision cross section is simplified by using two major approximations. The infinite summation over terms arising from the coupling to intermediate states of the target atom is approximated with the aid of a parameter and the closure relation. This parameter is proportional to the average excitation energy of the intermediate states as described in the literature. The atomic form factors are simplified through a dipole expansion. Results are obtained in terms of an average excitation energy of the medium. Exemplary results for stopping in Al are presented for estimated values of the average excitation energy of the intermediate states. These results approach the classical and experimental values as the velocity of the penetrating particle increases, agreeing within 20% at beta = 0.3.

Morgan, S. H., Jr.↗

NASA NTRS1980

Solid state SPS microwave generation and transmission study. Volume 1: Phase 2

The solid state sandwich concept for Solar Power Station (SPS) was investigated. The design effort concentrated on the spacetenna, but did include some system analysis for parametric comparison reasons. The study specifically included definition and math modeling of basic solid state microwave devices, an initial conceptual subsystems and system design, sidelobe control and system selection, an assessment of selected system concept and parametric solid state microwave power transmission system data relevant to the SPS concept. Although device efficiency was not a goal, the sensitivities to design of this efficiency were parametrically treated. Sidelobe control consisted of various single step tapers, multistep tapers, and Gaussian tapers. A preliminary assessment of a hybrid concept using tubes and solid state is also included. There is a considerable amount of thermal analysis provided with emphasis on sensitivities to waste heat radiator form factor, emissivity, absorptivity, amplifier efficiency, material and junction temperature.

Maynard, O. E.↗

NASA NTRS1980

Solid state SPS microwave generation and transmission study. Volume 2, phase 2: Appendices

The solid state sandwich concept for SPS was further defined. The design effort concentrated on the spacetenna, but did include some system analysis for parametric comparison reasons. Basic solid state microwave devices were defined and modeled. An initial conceptual subsystems and system design was performed as well as sidelobe control and system selection. The selected system concept and parametric solid state microwave power transmission system data were assessed relevant to the SPS concept. Although device efficiency was not a goal, the sensitivities to design of this efficiency were parametrically treated. Sidelobe control consisted of various single step tapers, multistep tapers and Gaussian tapers. A hybrid concept using tubes and solid state was evaluated. Thermal analyses are included with emphasis on sensitivities to waste heat radiator form factor, emissivity, absorptivity, amplifier efficiency, material and junction temperature.

Maynard, O. E.↗

NASA NTRS1982

On the inversion of block tridiagonals without storage constraints

A strategy was developed to permit trade-offs between the number of floating point operations required and the storage requirements for the solution of certain difference problems, such as block tridiagonal systems of equations. This is done by recomputing some intermediate results instead of storing them. Reducing the storage to the square root of the current requirement roughly doubles the number of computations. Reducing the storage more than this tends to make the number of computations prohibitively large. In theory, if m is the order of each sub-matrix in the block tridiagonal matrix, one can solve any linear system with only 5m(2) + 1 temporary storage cells. In many cases m is a constant and quite small. For example, in solving a factored form of the three-dimensional Navier-Stokes equations, the size m of the block tridiagonals is 5. This method lends itself to efficient use on computers with parallel processing or vector processing architectures. On these computers the larger number of floating point operations is more than offset by the decrease in I/O and the increased percentage of vector operations made possible by this algorithm.

Merriam, M. L.↗

NASA NTRS1982

Recent developments in thermal radiation system analyzer (Trasys)

Changes in the thermal radiation analyzer system (TRASYS) computer program are discussed. New capabilities were added while keeping intact the same data input structure. An overview of the program structure and general capabilities is given. Where appropriate, assessments are made of new features. The application of TRASYS peripheral programs and the importance they have in developing a totally integrated thermal analysis system are discussed. Form factor computations times were reduced approximately 40 percent, and the longer flux runs were reduced 50 percent when shadow tables were used.

Vogt, R. A.↗

NASA NTRS1986

Losses in Channels with Increased External Turbulence

An approximate method for determining the effect of the level of turbulence on the aerodynamic characteristics of convergent and diffuser channels is examined. A momentum equation for the boundary layer is in the method, introducing external flow turbulence on the basis of experimental values of the coefficient of friction and the form factor. It is found that at significant levels of external turbulence, losses must be considered not only in the boundary layer but also in the central region of the channel.

Zaryankin, A. Y.↗

NASA NTRS1985

Growth and differentiation of mammalian embryonic tissues exposed to hypergravity in vivo and in vitro

Decreased cartilage areas in embryonic limbs developing under excess g in vitro, is reported, as well as delayed skeletal development in embryos and fetuses exposed to excess g in utero. 12.5-day mouse limb buds were cultured at 2.6 g, and fixed at two days and six days of culture. In vivo experiments used alizarin-stained 18-day fetuses exposed to 2.3 g. In all studies, cartilage areas were determined using a digitized tablet. Form factor analysis determined that the main effect of in vitro centrifugation was a reduction in length of the limb elements, probably due to the precocious chondrogenesis seen in the upper regions of centrifuged limbs. Similar reductions in length of ossified areas was seen in the in utero studies.

Duke, J.↗

NASA NTRS1987

Meteor velocity distribution and an optimum monitoring mathematical model

At present, there are a great number of radio meteor, ionosphere and rocket observation data for the altitude range of 80 to 100 km which indicate the existence of large scale circulation systems in the mesopause to low thermosphere range which change regularly with season and latitude. But the existing observation network and observation programs are not optimal for revealing the main factors forming the circulation mode at these altitudes. A generalized optimum monitoring mathematical model is offered for consideration. The model input data are distribution density, response function, individual measurement root mean square uncertainty and detection effectiveness function. The model makes it possible to obtain the observation distribution density, the minimal possible dispersion and optimized system effectiveness.

Volkov, N. G.↗

NASA NTRS1988

Lightning initiation on aircraft in thunderstorms

The physical model of the initiation of lightning flashes by aircraft in thunderstorms is presented. The model is based on the 'bi-directional uncharged leader' concept by Kasemir, and is verified with airborne data from lightning strikes to an instrumented airplane (NASA F-106B and FAA CV-580). The characteristics of electromagnetic processes during lightning attachment are identified by comparison with those studied in natural flashes, those triggered by wire trailing rockets, and laboratory discharges. A triggered flash starts with either a negative corona or a positive leader that depends on the ambient electric field vector and the airplane form factor. The positive leader with continuous current that increases with time is followed in a few milliseconds by the negative stepped leader with current pulses of a few kA. The two leaders develop in space simultaneously and bi-directionally from the oppositely charged extremities of the airplane.

Mazur, Vladislav↗

NASA NTRS1988

Lightning initiation on aircraft in thunderstorms

A physical model of the initiation of lightning flashes in thunderstorms is presented. The model is based on the bi-directional charged leader concept of Kasemir, and is verified with airborne data from lightning strikes to instrumented airplanes (NASA F-106B and FAA CV-580). The characteristics of electromagnetic processes during lightning attachment are identified by comparison with those studied in natural flashes, those triggered by wire trailing rockets, and laboratory discharges. A triggered flash starts with either a negative corona or a positive leader that depends on the ambient electric field vector and the airplane form factor. The positive leader with continuous current that increases with time is followed in a few milliseconds by the negative stepped leader with current pulses of a few kA. The two leaders develop in space simultaneously and bi-directionally from the oppositely charged extremities of the airplane.

Mazur, Vladislav↗

NASA NTRS1988

PNS calculations for 3-D hypersonic corner flow with two turbulence models

A three-dimensional parabolized Navier-Stokes code has been used as a testbed to investigate two turbulence models, the McDonald Camarata and Bushnell Beckwith model, in the hypersonic regime. The Bushnell Beckwith form factor correction to the McDonald Camarata mixing length model has been extended to three-dimensional flow by use of an inverse averaging of the resultant length scale contributions from each wall. Two-dimensional calculations are compared with experiment for Mach 18 helium flow over a 4-deg wedge. Corner flow calculations have been performed at Mach 11.8 for a Reynolds number of .67 x 10 to the 6th, based on the duct half-width, and a freestream stagnation temperature of 1750-deg Rankine.

Smith, Gregory E.↗

NASA NTRS1988

Lightning initiation on aircraft in thunderstorms

A physical model of the initiation of lightning flashes by aircraft in thunderstorms is presented. The model is based on the 'bidirectional uncharged leader' concept of Kasemir, and is verified with airborne data from lightning strikes to instrumented airplanes (NASA F-106B and FAA CV-580). A triggered flash starts with either a negative corona or a positive leader that depends on the ambient electric field vector and the airplane form factor. The positive leader with continuous current that increases with time is followed in several milliseconds by the negative stepped leader with current pulses of several kA. The two leaders develop in space simultaneously and bidirectionally from the oppositely charged extremities of the airplane.

Mazur, Vladislav↗

NASA NTRS1990

Dynamics of the iron spins in superconducting YBa2(Cu(1-x)Fe(x))O7

The dynamics of the iron spins in YBa2(Cu(1-x)Fe(x))3O7 alloys (0 = to or less than 0.12) was studied by the means of inelastic neutron scattering. Measurements were performed using the time of flight technique with an excellent resolution of 50 micro eV, in a temperature range of 1.8 to 300 K. The doped samples show an elastic and a quasielastic intensity strongly varying with temperature. A spin glass like freezing is revealed at low temperature by a sudden decrease of the quasielastic intensity, an increase of the elastic or resolution limited intensity and a minimum in the quasielastic width. The freezing temperature corresponds to the one already determinated by a magnetic splitting in Mossbauer experiments. Above freezing, the occurrence of superconductivity slightly modifies the characteristics of the spin relaxation in the paramagnetic state, as shown by measurements in two x = 0.06 samples. In the whole temperature range of measurement, the dependence of the quasielastic intensity with the scattering vector q, mainly reflects the variation of the Iron form factor, which shows that the spins are almost uncorrelated.

Mirebeau, I.↗

NASA NTRS1990

A probe for real-time images of particle beams and their analyses in a merged-beams apparatus

A real-time charged particle beam probe was developed, which can be used both as a beam diagnostic (beam tuning) and to quantitatively determine the three-dimensional density distribution of a beam. The probe consists of a microchannel plate, an aluminized phosphor screen deposited on a fiber-optic faceplate, a flexible fiber-optic bundle, and a charge injection device (CID) in tandem. Digital or analog video output of the CID is fed into a computer or oscilloscope, respectively, for analysis or observation. The probe can be moved continuously along the beams' paths to obtain 'pictures' of the beam at any desired interval, thus giving three-dimensional form factors. The beams, singly or simultaneously, may be observed on the monitor facilitating the task of beam adjustment for optimum overlap. The digital output is used for quantitative computation of the beam overlaps. The device is linear with beam intensity, but the performance degrades with time due to beam damage of the microchannel plate.

Forand, J. L.↗

NASA NTRS1991

Collision avoidance sensor skin

The objective was to totally eliminate the possibility of a robot (or any mechanism for that matter) inducing a collision in space operations. We were particularly concerned that human beings were safe under all circumstances. This was apparently accomplished, and it is shown that GSFC has a system that is ready for space qualification and flight. However, it soon became apparent that much more could be accomplished with this technology. Payloads could be made invulnerable to collision avoidance and the blind spots behind them eliminated. This could be accomplished by a simple, non-imaging set of 'Capaciflector' sensors on each payload. It also is evident that this system could be used to align and dock the system with a wide margin of safety. Throughout, lighting problems could be ignored, and unexpected events and modeling errors taken in stride. At the same time, computational requirements would be reduced. This can be done in a simple, rugged, reliable manner that will not disturb the form factor of space systems. It will be practical for space applications. The lab experiments indicate we are well on the way to accomplishing this. Still, the research trail goes deeper. It now appears that the sensors can be extended to end effectors to provide precontact information and make robot docking (or any docking connection) very smooth, with minimal loads impacted back into the mating structures. This type of ability would be a major step forward in basic control techniques in space. There are, however, baseline and restructuring issues to be tackled. The payloads must get power and signals to them from the robot or from the astronaut servicing tool. This requires a standard electromechanical interface. Any of several could be used. The GSFC prototype shown in this presentation is a good one. Sensors with their attendant electronics must be added to the payloads, end effectors, and robot arms and integrated into the system.

Source record↗

NASA NTRS1991

Spin glass freezing and superconductivity in YBa2(Cu(1-x)Fe(x))3O7 alloys

The dynamics were studied of the iron spins in superconducting YBa2(Cu(0.94)Fe(0.06))3O7 by neutron time of flight measurements. Two samples were studied with slightly different characteristics, as shown by resistivity and neutron diffraction measurements. The same dynamical anomalies are observed by neutrons in both samples. Differences appear qualitative but not quantitative. In the whole temperature range, the q-dependence of the magnetic intensity mainly reflects the magnetic form factor of iron which shows that the iron spins are almost uncorrelated. The elastic and quasielastic intensities strongly vary with temperature. A spin glass like freezing is revealed at low temperature by a sharp decrease of the quasielastic intensity, an increase of the 'elastic' or resolution limited intensity and a minimum in the quasielastic width. The freezing temperature (T sub f - 18 K) corresponds to that already determined by a magnetic splitting in Mossbauer experiments. Above T sub f, the relaxation of the iron spins in the paramagnetic state is modified by the occurrence of superconductivity. An increase was observed of the quasielastic intensity and of the quasielastic width at the superconducting transition.

Mirebeau, I.↗

NASA NTRS1992

Atomic oxygen and ultraviolet radiation mission total exposures for LDEF experiments

Atomic oxygen and solar radiation exposures were determined analytically for rows, longerons, and end bays of the LDEF. Calculated atomic oxygen exposures are based on an analytical model that accounts for the effects of thermal molecular velocity, atmospheric temperature, number density, spacecraft velocity, incidence angle, and atmospheric rotation. Results also incorporate variations in solar activity, geomagnetic index, and orbital parameters occurring over the six year flight of the spacecraft. Solar radiation exposure calculations are based on the form factors reported in the Solar Illumination Data Package prepared by NASA Langley. The earth albedo value for these calculations was based on the Nimbus 7 earth radiation data set. Summary charts for both atomic oxygen and solar radiation exposure are presented to facilitate the use of the data generated by LDEF experimenters.

Bourassa, R. J.↗

NASA NTRS1991

Optical correlators for automated rendezvous and capture

The paper begins with a description of optical correlation. In this process, the propagation physics of coherent light is used to process images and extract information. The processed image is operated on as an area, rather than as a collection of points. An essentially instantaneous convolution is performed on that image to provide the sensory data. In this process, an image is sensed and encoded onto a coherent wavefront, and the propagation is arranged to create a bright spot of the image to match a model of the desired object. The brightness of the spot provides an indication of the degree of resemblance of the viewed image to the mode, and the location of the bright spot provides pointing information. The process can be utilized for AR&C to achieve the capability to identify objects among known reference types, estimate the object's location and orientation, and interact with the control system. System characteristics (speed, robustness, accuracy, small form factors) are adequate to meet most requirements. The correlator exploits the fact that Bosons and Fermions pass through each other. Since the image source is input as an electronic data set, conventional imagers can be used. In systems where the image is input directly, the correlating element must be at the sensing location.

Juday, Richard D.↗