Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION INJECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Extraction and Injection in the Electron Injector for the Electron-Ion Collider

The electron injector for the Electron-Ion Collider (EIC) consists of a linear accelerator, a beam accumulation ring, and the Rapid Cycling Synchrotron (RCS) before the electrons are injected into the Electron Storage Ring (ESR) and collided. Extraction out of the RCS is complicated by limited space and the nominal beam pipe aperture, while injection into the ESR is complicated due to the limitation of kicker strength, so that the kickers will not impact the proton beam in the adjacent Hadron Storage Ring (HSR); additionally, the ESR kickers must also provide enough kick to the stored bunch for the swap-out scheme. This paper covers the injection into and extraction out of the RCS, as well as injection into the ESR, detailing layout, optics, and anticipated parameters of the septa and different kickers.

Deitrick, K. [Thomas Jefferson National Accelerato↗
DOE OSTI2022

Modelling the Alfvén eigenmode induced fast-ion flow measured by an imaging neutral particle analyzer

An imaging neutral particle analyzer (INPA) provides energy and radially resolved measurements of the confined fast-ion population ranging from the high-field side to the edge on the midplane of the DIII-D tokamak. In recent experiments, it was used to diagnose fast-ion flow in the INPA-interrogated phase-space driven by multiple, marginally unstable Alfvén eigenmodes (AEs). Here, the key features of this measured fast-ion flow are: (I) a fast-ion flow from q min and the injection energy (81 keV) towards lower energies and plasma periphery.(II) A flow from the same location towards higher energies and the plasma core, (III) a phase-space 'hole' at the injected energy and plasma core and (IV) a pile-up at the plasma core at lower energies (~60 keV). Ad hoc energetic particle diffusivity modelling of TRANSP significantly deviates from the observation. Comparably, a reduced modelling, i.e. a combination of NOVA-K and ASCOT5 code with the measured mode structure and amplitude, generally reproduce some key features of the observed phase-space flow, but largely failed to interpret fast ion depletion near the plasma axis. At last, self-consistent, first-principle multi-phase hybrid simulations that include realistic neutral beam injection and collisions are able to reproduce most features of the time-resolved phase-space flow. During consecutive hybrid phases, an RSAE consistent with the experiment grows and saturates, redistributing the injected fast ions. The resulting synthetic INPA images are in good agreement with the measurement near the injection energy. The simulations track the fast-ion redistribution within the INPA range, confirming that the measured fast-ion flow follows streamlines defined by the intersection of phase-space surfaces of constant magnetic moment μ and constant E' = nE + ωP φ , where n and ω are the instability toroidal mode number and frequency, and E and P φ the ion energy and toroidal canonical momentum. Nonperturbative effects are required to reproduce the depletion of fast ions near the magnetic axis at the injection energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Cause and impact of low-frequency chirping modes in DIII-D hybrid discharges

Significant variations in MHD activity and fast-ion transport are observed in the DIIID high-beta, steady-state hybrid discharges with a mixture of Electron Cyclotron (EC) waves and Neutral Beam Injection (NBI). When Electron Cyclotron Heating (ECH) or Current Drive (ECCD) is applied, Alfven Eigenmodes (AEs) are usually suppressed and replaced by low-frequency bursting modes. The analysis of a recently compiled database of hybrid discharges suggests that the change of the fast-ion pressure especially the perpendicular pressure is the main factor responsible for the instability transition. The lower ratio of fast-ion injection speed v inj to Alfven speed v alfven and slight drop of safety factor q min during ECCD may also facilitate the transition. The database shows that AEs mainly occur when the fast-ion fraction P f /P total is less than 0.53 and v inj /v alfven is greater than 0.50, while low-frequency bursting modes appear in the opposite regime. In this research, P f and P total are the central fast-ion pressure from classical prediction and total plasma pressure, respectively. The reason why the instability transition correlates with P f /P total and v inj /v alfven is that they can significantly modify the drive of low-frequency bursting modes and AEs. The explanation is supported by the observation that low-frequency bursting modes are rarely seen in the hybrids with NBI only, with EC waves and counter-NBI, or with high plasma density. A careful check of the low-frequency bursting modes suggests that they are mainly chirping (neoclassical) tearing modes [referred to as chirping (N)TM], i.e. the mode frequency firstly jumps up from the steady (N)TM frequency, then chirps down, and finally returns to the steady (N)TM frequency. Sometimes, the (N)TMs are fully stabilized and replaced with pure fishbones. Lastly, the resonance condition calculation and ’Kick’ model simulations suggest that (N)TMs and fishbones can interact through modification of the fast ion distribution in phase space, which influences the drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Studying fast-ion populations using oscillations in solid-state neutral-particle analyzer signal and neutral-beam injection power

A method for determining the fast-ion population density in magnetically confined plasmas as a function of pitch-radius, (λ, R), using a solid-state neutral-particle analyzer (ssNPA) signal and neutral-beam injection (NBI) power-output data has been developed. Oscillations in the NBI power output are replicated only in the active part of the ssNPA signal, allowing this to be separated from the passive and background signals, which usually complicate data from this diagnostic. Results obtained using this method are compared with those from standard techniques using data from the Mega-Amp Spherical Tokamak Upgrade spherical tokamak.

Instruments & Instrumentation↗
DOE OSTI2023

Global gyrokinetic simulations of electrostatic microturbulent transport in LHD stellarator with boron impurity

Abstract Global gyrokinetic simulations of electrostatic microturbulent transport for discharge # 166256 of the Large Helical Device stellarator in the presence of boron impurity show the co-existence of the ion temperature gradient (ITG) turbulence and trapped electron mode (TEM) turbulence before and during boron powder injection. ITG turbulence dominates in the core, whereas TEM dominates near the edge, consistent with the experimental observations. Linear TEM frequency increases from ∼ 80 kHz to ∼ 100 kHz during boron injection, and ITG frequency decreases from ∼ 20 kHz to ∼ 13 kHz, consistent with the experiments. The poloidal wave number spectrum is broad for both ITG (0–0.5 mm −1 ) and TEM (0–0.25 mm −1 ). The nonlinear simulations with boron impurity show a reduction in the heat conductivity compared to the case without boron. The comparison of the nonlinear transport before and during boron injection shows that the ion heat transport is substantially reduced in the region where the TEM is dominant. However, the average electron heat transport throughout the radial domain and the average ion heat transport in the region where the ITG is dominant are similar. The simulations with boron show the effective heat conductivity values qualitatively agree with the estimate obtained from the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Variable Ion Compositions of Solar Energetic Particle Events in the Inner Heliosphere: A Field Line Braiding Model with Compound Injections

We propose a model for interpreting highly variable ion composition ratios in solar energetic particle (SEP) events recently observed by the Parker Solar Probe (PSP) at 0.3–0.45 au. We use numerical simulations to calculate SEP propagation in a turbulent interplanetary magnetic field with a Kolmogorov power spectrum from large scales down to the gyration scale of energetic particles. We show that when the source regions of different species are offset by a distance comparable to the size of the source regions, the observed energetic particle composition He/H can be strongly variable over more than two orders of magnitude, even if the source ratio is at the nominal value. Assuming a 3 He/ 4 He source ratio of 10% in impulsive 3 He-rich events and the same spatial offset of the source regions, the 3 He/ 4 He ratio at observation sites also vary considerably. The variability of the ion composition ratios depends on the radial distance, which can be tested by observations made at different radial locations. We discuss the implications of these results on the variability of ion composition of impulsive events and on further PSP and Solar Orbiter observations close to the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Fast ion studies in the extended high-performance high β P plasma on EAST

Comprehending and optimizing fast ion behaviors is critical for the enhancement of performance in Experimental Advanced Superconducting Tokamak (EAST). This study explores the potential benefits of several factors that can improve the fast ion confinement. First, experiments show the change in the direction of the NBI2 from counter-I p to co-I p leads to a significant reduction in fast ion losses. TRANSP/NUBEAM simulation and tomography results based on fast-ion D-alpha measurements reveal that after the neutral beam injection (NBI) upgrade, the beam ion prompt loss is reduced by approximately 50%. Second, the upgraded ion cyclotron resonant frequency (ICRF) antenna at the N-port features twice the coupling resistance of the original antennas at EAST. This improved ICRF power coupling has enhanced the synergistic heating effect of NBI + ICRF, where the ICRF wave field accelerates beam ions at the harmonics. Experiments demonstrate that NBI + ICRF synergistic not only enhances plasma neutron yield and β P , but also accelerates beam ions to hundreds of keV. Further, the electron density and the neutral beam voltage have been optimized to reduce the fast ion slowing-down time and beam ion losses. Experimental and simulation results indicate that increasing the electron density reduces beam ion losses and enhances the bootstrap current fraction. While higher beam voltage results in a slight decrease in beam power absorption, it can increase the fraction of bootstrap current. With the understanding of these optimization of fast ion confinement, experiments have demonstrated fully non-inductive operation at high density (n e /n G ∼ 0.67, β P ∼ 3.1, β N ∼ 2.1, H 98,y2 ∼ 1.2) even without the support of co-I p beam NBI2. This investigation presents a potential regime to enhance fast ion confinement and extend performance in the high β P plasma for future experiments.

EAST tokamak↗
DOE OSTI2023

Core-Pedestal Plasma Configurations in Advanced Tokamaks

Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Effect of energetic ions on edge-localized modes in tokamak plasmas

The most efficient and promising operational regime for the International Thermonuclear Experimental Reactor tokamak is the high-confinement mode. In this regime, however, periodic relaxations of the plasma edge can occur. These edge-localized modes pose a threat to the integrity of the fusion device. Here we reveal the strong impact of energetic ions on the spatio-temporal structure of edge-localized modes in tokamaks using nonlinear hybrid kinetic–magnetohydrodynamic simulations. A resonant interaction between the fast ions at the plasma edge and the electromagnetic perturbations from the edge-localized mode leads to an energy and momentum exchange. Energetic ions modify, for example, the amplitude, frequency spectrum and crash timing of edge-localized modes. The simulations reproduce some observations that feature abrupt and large edge-localized mode crashes. The results indicate that, in the International Thermonuclear Experimental Reactor, a strong interaction between the fusion-born alpha particles and ions from neutral beam injection, a main heating and fast particle source, is expected with predicted edge-localized mode perturbations. This work advances the understanding of the physics underlying edge-localized mode crashes in the presence of energetic particles and highlights the importance of including energetic ion kinetic effects in the optimization of edge-localized mode control techniques and regimes that are free of such modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

ORBIT simulations of fast ion power loads on the wall of the Divertor Tokamak Test

Abstract Neutral beam injection in tokamaks produces a population of fast ions, which interact with 3D magnetic fields in a variety of ways, often resulting in energetic particle losses in very short times to the wall. Careful design of neutral beams and active control of error fields helps to keep these losses to a minimum. Nevertheless, past experience in tokamaks in the 1980s and detailed simulations for future machines, such as International Thermonuclear Experimental Reactor, suggest that very localized fast ion losses (‘hot spots’) can be present, even if the overall losses are low. In this paper, we discuss this issue in the Divertor Tokamak Test (DTT) project, and we show that in the standard single-null full-power scenario of the DTT, fast ions produce two hot spots, corresponding approximately to the beam injection and exit toroidal angles: the former being mainly due to prompt losses/passing particles, while the latter is due to trapped ions. However, the maximum power load in these spots is of the order ∼ 63 kW m −2 , below the tolerance of plasma-facing components of the machine.

Physics↗
DOE OSTI2024

Characterization of SOL profiles and turbulence in ICRF-heated plasmas in EAST

Scrape-off layer (SOL) profiles and turbulence in ion cyclotron range of frequency (ICRF)-heated plasmas are investigated by the reciprocating probe diagnostic system (FRPs) and gas puff imaging (GPI) diagnostic in EAST. A radio-frequency (RF) sheath potential reaching up to 100 V is identified proximate to the ICRF antennas. Notably, the amplitude of this RF sheath potential escalates in response to rising ICRF power and inversely with plasma density. When a RF sheath is present in the far SOL, a pronounced density ‘shoulder’ forms in front of the ICRF antennas, while the ‘shoulder’ fade away as the antenna and associated RF sheath shift outwards. A strong E r shear is revealed by measurements from both FRPs and GPI. Analysis of the poloidal wave number-frequency spectrum reveals suppression of high-frequency turbulence in the far SOL due to the RF sheath. This effect is manifested in the reduced autocorrelation time τ c and reduced average blob size δ blob of the SOL plasma. Intriguingly, the poloidal propagation direction of the low-frequency turbulence reverses from the electron to the ion diamagnetic drift direction at the RF sheath location. A surge of tungsten impurity is potentially attributed to the heightened interaction between the SOL plasmas and the wall material. Shifting the ICRF antennas outward, to alleviate heat spots, results in the relocation of the RF sheath to the shaded region of the main limiter. This shift amplifies the radial velocity of blobs in the far SOL and concurrently diminishes the SOL density when compared to conditions without ICRF injection. The properties of ion saturation current fluctuations are consistent with the stochastic model predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Dependence of ion-cyclotron range of frequencies instabilities on species mix and fast-ion distribution: III. Novel sub-cyclotron modes

Dedicated DIII-D experiments studied instabilities above and below the ion cyclotron frequency by injecting thirteen different neutral beam populations into L-mode plasmas with different thermal compositions of H, D, and 3 He at five different values of toroidal field. Two companion papers describe the results of these experiments in detail. This paper focuses on data and analysis of two instabilities that occur at ${\sim}0.6$ of the deuterium and hydrogen cyclotron frequencies $f_\mathrm {cD}$ and $f_\mathrm {cH}$ in mixed hydrogen and deuterium plasmas. The modes below $f_\mathrm {cD}$ are often driven unstable by deuterium beams but are rarely destabilized by hydrogen beams. The modes below $f_\mathrm {CD}$ are reported here for the first time in a fusion plasma. These $\mathrm{sub-}f_\mathrm {cH}$ modes are only driven by deuterium beams but, unlike the $\mathrm{sub-}f_\mathrm {cD}$ modes, they are only unstable in plasmas with deuterium concentrations that are ${\lesssim}20\%$; they also have a smaller amplitude than the sub-deuterium modes. Addition of fully-ionized 3 He to the plasma has little effect on the sub-cyclotron deuterium modes but is stabilizing for the sub-cyclotron hydrogen modes. The modes are excited in the core and have toroidal mode numbers around 20. These trends are compared with calculations of the growth rate in a simplified model. The theory successfully predicts global Alfvén eigenmode instability with frequencies and mode numbers close to experimental values, the stronger amplitude of the sub-deuterium modes, and the species-mix dependence of the sub-hydrogen modes. Increased damping associated with the ion-ion hybrid, cutoff, and crossover frequencies plausibly accounts for the stabilization of the $\mathrm{sub-}f_\mathrm {cH}$ modes when 3 He is puffed. However, the relative stability of $\mathrm{sub-}f_\mathrm {cH}$ modes during hydrogen injection remains unexplained.

electromagnetic ion cyclotron instability↗
DOE OSTI2023

Impact of aquifer properties on the extent and timeline of CO 2 trapping

Abstract Geologic CO 2 sequestration in porous saline aquifers is a promising approach to reducing atmospheric concentrations of CO 2 . Reactive transport simulations provide the opportunity to analyze which factors influence geochemical reactivity in the reservoir, understand those most important for promoting CO 2 trapping, and assess individual sites. Field‐scale aquifer characterization is time and resource intensive such that here, reactive transport simulations are leveraged to enhance understanding of selected aquifer properties including porosity, permeability, depth of storage, and carbonate mineralogy on the overall CO 2 trapping potential to better select sites promoting geochemical reactivity for CO 2 trapping. There are different mechanisms for sequestrating CO 2 . Once injected, CO 2 will dissolve into the brine to create an acidic environment, resulting in the dissolution of pre‐injection formation minerals. Released ions can reprecipitate as secondary minerals. The dissolved CO 2 and mineralized CO 2 are considered as a more secure form of CO 2 trapping in this study compared to the free supercritical CO 2 . Here, a framework leveraging a controlled set of field scale simulations is developed to facilitate rapid, optimized site selection. Simulations vary aquifer properties to understand the impact of each unique property on CO 2 trapping, tracking, and comparing the amount of supercritical, aqueous, and mineralized CO 2 . The rate at which the CO 2 injected into the aquifer is converted to aqueous or mineralized CO 2 is newly defined here as the sequestration efficiency and used to compare simulation results. The reservoir depth and fraction of carbonate minerals in the formation are shown to be more important factors than reservoir porosity and permeability in affecting CO 2 trapping. However, the impact of aquifer properties on the evolution of injected CO 2 depends on the stage of the sequestration project. © 2023 Society of Chemical Industry and John Wiley & Sons, Ltd.

Energy & Fuels↗
DOE OSTI2021

Isotope effects on transport in LHD

Abstract Isotope effects are one of the most important issues for predicting future reactor operations. Large helical device (LHD) is the presently working largest stellarator/helical device using super conducting helical coils. In LHD, deuterium experiments started in 2017. Extensive studies regarding isotope effects on transport have been carried out. In this paper, the results of isotope effect studies in LHD are reported. The systematic studies were performed adjusting operational parameters and nondimensional parameters. In L mode like normal confinement plasma, where internal and edge transport barriers are not formed, the scaling of global energy confinement time ( τ E ) with operational parameters shows positive mass dependence ( M 0.27 ; where M is effective ion mass) in electron cyclotron heating plasma and no mass dependence ( M 0.0 ) in neutral beam injection heating plasma. The non-negative ion mass dependence is anti-gyro-Bohm scaling. The role of the turbulence in isotope effects was also found by turbulence measurements and gyrokinetic simulation. Better accessibility to electron and ion internal transport barrier (ITB) plasma is found in deuterium (D) plasma than in hydrogen (H). Gyro kinetic non-linear simulation shows reduced ion heat flux due to the larger generation of zonal flow in deuterium plasma. Peaked carbon density profile plays a prominent role in reducing ion energy transport in ITB plasma. This is evident only in plasma with deuterium ions. New findings on the mixing and non-mixing states of D and H particle transports are reported. In the mixing state, ion particle diffusivities are higher than electron particle diffusivities and D and H ion density profiles are almost identical. In the non-mixing state, ion particle diffusivity is much lower than electron diffusivity. Deuterium and hydrogen ion profiles are clearly different. Different turbulence structures were found in the mixing and non-mixing states suggesting different turbulence modes play a role.

Physics↗
DOE OSTI2022

Localized Excitation of Electromagnetic Ion Cyclotron Waves From Anisotropic Protons Filtered by Magnetic Dips

The excitation of electrostatic and/or electromagnetic waves in the plasma universe is often associated with anisotropic velocity distributions of charged particles. In Earth's inner magnetosphere, this anisotropy can gradually develop as particles injected from the magnetotail drift around the Earth at different speeds depending on their energy and pitch angle. Here, we show that the perpendicular-moving and bouncing ions can be separated more abruptly near the injection front. These pitch-angle filters are localized magnetic dip structures formed by the diamagnetic behavior of the injected particles, which can trap perpendicular-moving ions and allow bouncing ions to overtake. The resulting ion anisotropy facilitates the rapid generation of electromagnetic ion cyclotron (EMIC) waves, which in turn can largely reshape the Van Allen radiation belts. This scenario is examined by case and statistical observations, together with numerical simulations that reproduce most of the observational signatures, to support the causal relationship between magnetic dips, anisotropic ion distributions, and localized excitation of EMIC waves. Finally, our study highlights the important roles of magnetic dips in the inner magnetospheric dynamics, as pitch-angle filters of the injected ions and traveling hotspots of EMIC wave activities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Linear gyrokinetic simulations of toroidal Alfvén eigenmodes in the Mega-Amp Spherical Tokamak

Linear gyrokinetic (GK) simulations using the Gyrokinetic Toroidal Code (GTC) have been performed to investigate Toroidicity-driven Alfvén Eigenmodes (TAEs) driven by the neutral beam injection (NBI) induced fast ions in the Mega-Amp Spherical Tokamak (MAST) to identify the non-perturbative and kinetic effects of thermal plasma. A specific TAE in MAST discharge 26887, with an on-axis NBI power of approximately 1.5 MW and plasma current around 800 kA, exhibited frequency chirping, and the tangential soft x-ray camera array resolved the radial mode structure peaked near |q|=1.5. Various excitation methods were used in the GTC linear simulations, illustrating this code's capability to realistically represent the mechanisms and behaviors of fast ion-driven TAEs in spherical tokamaks. The radial structures from these GK simulations closely match measurements and calculations performed using the NOVA ideal MHD code, though with the frequencies approximately 10 kHz lower, likely due to various kinetic and non-perturbative effects. The simulations measured the damping rates due to continuum damping, radiative damping, and ion Landau damping, revealing that ion Landau damping has the most significant contribution to the total damping rate of the TAE. A comparison of growth rates of TAEs excited by fast ion Maxwellian and slowing-down distributions shows that the TAEs excited by a fast ion anisotropic pitch distribution (as part of the slowing-down distributions) are more unstable compared to those excited by a Maxwellian distribution with an equivalent fast ion beta. This shows that the use of fast ion anisotropy alters the number of fast ions to be in shear Alfvén resonance, and hence, it can greatly affect the stability of TAEs. These tests can be performed with the GTC but impossible with ideal MHD simulations, highlighting the necessity of kinetic simulations such as the GTC for a precise prediction of the TAE stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Investigating the role of edge neutrals in exciting tearing mode activity and achieving flat temperature profiles in LTX-β

Abstract We present observations, numerical simulations, and analysis from experiments in the Lithium Tokamak Experiment-Beta (LTX- β ) in which the electron temperature profile ( T e ( r )) shifts from flat to peaked and a tearing mode is also destabilized when the average density ( n e ave ) exceeds ∼10 19 m −3 . Flat T e ( r ) is obtained routinely in LTX- β , with a lithium coated, low-recycling first wall, once the external fueling is stopped and density decays [Boyle et al 2023 Nucl. Fusion 63 056020]. In the present experiment, flat T e profiles can be sustained while maintaining constant n e ave below a line averaged density threshold ( n e ave th ) of ∼10 19 m −3 . Above n e ave th , T e ( r ) shifts from flat to peaked and a tearing mode is destabilized. Due to low recycling, the achieved n e ave can be controlled precisely by external fueling and hence, a certain threshold of the edge neutral inventory from the external fueling is experimentally manifested through n e ave th . The goal of the present work is to investigate the role of edge neutrals in determining T e ( r ) and MHD stability in the unique low-recycling regime of LTX- β . Our hypothesis is that the peaking of T e ( r ) beyond n e ave th is due ultimately to the edge cooling by the cold neutrals beyond a critical fueling flux. At lower fueling flux, flat T e ( r ) results in broader pressure profile and lower resistivity, which in turn stabilizes the tearing mode. This hypothesis is supported by edge neutral density estimation by DEGAS 2 code. Mode analysis by singular value decomposition confirms the tearing mode structure to be m / n = 2/1 ( m and n being the poloidal and toroidal mode numbers). Linear tearing stability analysis with M3D-C1 predicts that plasmas with n e ave > 10 19 are highly susceptible to a n = 1 tearing mode. ORBIT simulations, however, confirmed that the tearing modes do not contribute to the loss of fast ions from neutral beam injection. This study shows for the first time that the neutral inventory at the edge could be one of the deciding factors for the achievability of the unique operation regime of flat T e ( r ) and the excitation of tearing activity that could be disruptive for the plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Near-edge beta induced Alfven eigenmode in DIII-D high bootstrap current fraction plasmas

In DIII-D high bootstrap current fraction plasmas heated solely by neutral beam injection, a fast ion-driven Beta-Induced Alfven Eigenmode (BAE) is frequently observed. The BAE peaks near the edge, suggesting the possibility of enhanced fast ion transport there and raising a potential concern for the first wall. Theoretical analysis and simulations show that the mode location is not fully determined by the fast-ion drive intensity, i.e. fast ion pressure gradient but is strongly related to the background unfavorable magnetic curvature drive near the edge, which is an intrinsic property of advanced scenarios that rely on a large radius internal transport barrier that exists for all the kinetic channels for performance improvement.

beta induced Alfven eigenmode↗