Search NASA⌕ Search

SEARCH · Search NASA

Results for “JORDAN FORM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Renewable Energy Integration in Remote Alaska Communities

This guide was developed through the U.S. Department of Energy (DOE) Energy Transitions Initiative Partnership Project (ETIPP) technical assistance (TA) projects for Nikolski and St. George. Both communities had wind turbine projects that failed due to integration and maintenance issues. Due to these failures, Nikolski and St. George sought help to investigate renewable energy alternatives and associated integration strategies, with a focus on technologies that could be easily maintained within the community. The primary objective of this guide was to interview subject matter experts and document lessons learned to address potential renewable energy and storage integration issues in remote Alaskan communities. This guide is intended to provide information to rural Alaskan communities considering renewables with the purpose of sharing best practices and case studies to facilitate the successful implementation of future renewable energy projects.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1999

Initial Observations on the Burning of an Ethanol Droplet in Microgravity

Combustion of liquid ethanol represents an important system both from fundamental and practical points of view, Ethanol is currently being used as an additive to gasoline in order to reduce carbon monoxide and particulate emissions as well as to improve the fuel octane rating. A detailed physical understanding of liquid ethanol combustion is therefore necessary to achieve an optimal performance of such fuel blends in practical conditions. Ethanol is also a relatively simple model compound suitable for investigation of important combustion characteristics typical of more complex fuels. In particular, ethanol has been proposed for studies of sooting behavior during droplet burning. The sooting nature of ethanol has pressure sensitivities similar to that of n-heptane, but shifted to a higher range of pressures (1-3 atm). Additionally, liquid ethanol is miscible with water produced during its combustion forming mixtures with azeotropic behavior, a phenomenon important for understanding multi-component, liquid fuel combustion. In this work, we present initial results obtained in a series of recent space-based experiments and develop a detailed model describing the burning of ethanol droplet in microgravity.

Kazakov, Andrei↗
NASA NTRS1984

Relative abundance of the helium isotopes He-3 and He-4 in the cosmic radiation

The geomagnetic field near the equator is used to measure the He-3/He-4 abundance ratio near 6 GeV/nucleon. This ratio is found to be 0.24 + or - 0.05, under the assumption that the helium rigidity spectrum has the form dI/dR = about R exp(-2.65). If all He-3 is of secondary origin, this implies an interstellar mean escape-path length of about 15 g/sq cm, a value considerably larger than that determined from observations of heavier elements but compatible with measurements of the helium isotopic ratio at lower energies.

Jordan, S. P.↗
NASA NTRS2000

Orthostatic intolerance: a disorder of young women

Orthostatic intolerance (OI) is a cause of significant disability in otherwise healthy women seen by gynecologists. Orthostatic tachycardia is often the most obvious hemodynamic abnormality found in OI patients, but symptoms may include dizziness, visual changes, discomfort in the head or neck, poor concentration, fatigue, palpitations, tremulousness, anxiety, and, in some cases, fainting (syncope). It is the most common disorder of blood pressure regulation after essential hypertension, and patients with OI are traditionally women of childbearing age. Estimates suggest that at least 500,000 Americans suffer from some form of OI, and such patients comprise the largest group referred to centers specialized in autonomic disorders. This article reviews recent advances made in the understanding of this condition, potential pathophysiological mechanisms contributing to orthostatic intolerance, and therapeutic alternatives currently available for the management of these patients.

Review, Tutorial↗
DOE OSTI2022

Chloride Salt Purification by Reaction With Thionyl Chloride Vapors to Remove Oxygen, Oxygenated Compounds, and Hydroxides

Molten chloride salts (including MgCl 2 , KCl, NaCl, and ZnCl 2 ) are being considered for heat transfer media for renewable (solar) and nuclear power generators, as fuel carrier for nuclear reactors, and as thermal energy storage media. Impurities such as oxygen, hydroxides, moisture, and sulfur are known to negatively influence the corrosion of materials in contact with the salt (e.g., structural metals). Commercially available chloride salts come with a range of impurities. Before using the chloride salts at high temperature, it is desirable to remove the impurities to increase the performance of the salt and reduce corrosion. In this study, we tested the use of thionyl chloride vaporized into a stream of argon to react with oxygenated impurities in a mixture of MgCl 2 -KCl-NaCl, removing them as HCl and SO 2 . The reagent was bubbled through the salt when both above and below the melting point. The reaction was followed using thermocouple data from the salt and by Fourier transform infrared (FTIR) spectroscopy on the exhaust of the reactor. The reaction kinetics were followed by comparing the peaks from SO 2 product to SOCl 2 reagent in the FTIR spectra. The purity of the salt was assessed at the end of the purification process by x-ray diffraction and inductively coupled plasma analysis. Although the process was effective in removing the oxygen content of the mixture, ternary compounds were formed in the process, including KNiCl 3 and KMgCl 3 . The nickel in KNiCl 3 came from the reaction between the salt and the nickel vessel. Thus, these experiments suggest that improvements to the process must be made before using SOCl 2 vapors for the purification of chloride salts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

An efficient algorithm for calculation of the Luenberger canonical form.

A new algorithm is presented to obtain the Luenberger canonical form for multivariable systems. A distinct feature of the method is that the canonical form is obtained directly and, if necessary, the similarity transformation can be computed. There is a substantial reduction in the amount of computation compared to Luenberger's method. The reduced computations along with Gaussian techniques lend greater inherent accuracy and the ability to refine the solution with additional computations. An example is presented to illustrate the technique.

Jordan, D.↗
NASA NTRS1985

The isotopic composition of helium in the cosmic radiation above 11 gigavolts

The He-3/He-4 abundance ratio above 11 GV has been measured with a balloon-borne experiment that employs the geomagnetic method of isotope separation near earth's equator. Above a kinetic energy of approximately 6 GeV per nucleon, the He-3/He-4 ratio is measured to be 0.24 + or - 0.05 under the assumption that the helium spectrum at earth is a power law in rigidity of the form R to the -2.65th. The implied interstellar mean escape pathlength of about 15 g per sq cm, with this assumption, is considerably greater than values determined from observations of heavier elements. Propagation models more complex than the standard simple leaky box would be required to simultaneously understand the propagation of both the lighter and heavier components of cosmic rays.

Jordan, S. P.↗
NASA NTRS2004

Continuing Evolution of Mars Sample Return

This paper addresses the continued evolution of the Groundbreaking MSR concept over the last year. One of the tenets of the low-cost approach is to use substantial heritage from an earlier mission, Mars Science Laboratory (MSL). Recently, the MSL project developed and switched to a revolutionary landing approach, coined 'sky-crane' where the MSL, which is a rover, is lowered gently to the Martian surface from a hovering vehicle. MSR has adopted this approach, again continuing to capitalize on the heritage for a significant portion of the new lander. In parallel, a MSR Technology Board was formed to reexamine MSR technology needs and participate in a continuing refinement of architectural trades. While the focused technology program continues to be definitized through the remainder of this year, the current assessment of what technology development is required, is discussed in this paper. In addition, the results of new trade studies and considerations will be discussed.

Mars Sample Return (MSR)↗
DOE OSTI2022

Diamine solvent system for CO 2 capture

Disclosed herein is a method and system for CO 2 removal from a gas stream using a diamine solvent having a Formula I R 1 (R 2 )N-L 1 -NH-R 3 . With respect to Formula I, each of R 1 and R 2 independently is aliphatic, cycloaliphatic, or R 1 and R 2 together with the nitrogen to which they are attached, form a heterocyclyl ring; L 1 is aliphatic, cycloaliphatic, or L 1 and R 1 together with the nitrogen to which they are attached form a heterocyclyl ring; and R 3 is aliphatic, cycloaliphatic, cycloalkylalkyl, or alkoxyalkyl. And/or the compound may have a viscosity of less than 75 cP at a CO 2 -loading of 40 mol % and at a temperature of 40° C.

Malhotra, Deepika↗
DOE OSTI2023

Diamine solvent system for CO 2 capture

Disclosed herein is a method and system for CO 2 removal from a gas stream using a diamine solvent having a Formula I R 1 (R 2 )N-L 1 -NH—R 3 Formula I. With respect to Formula I, each of R 1 and R 2 independently is aliphatic, cycloaliphatic, or R 1 and R 2 together with the nitrogen to which they are attached, form a heterocyclyl ring; L 1 is aliphatic, cycloaliphatic, or L 1 and R 1 together with the nitrogen to which they are attached form a heterocyclyl ring; and R 3 is aliphatic, cycloaliphatic, cycloalkylalkyl, or alkoxyalkyl. And/or the compound may have a viscosity of less than 75 cP at a CO 2 -loading of 40 mol % and at a temperature of 40° C.

Malhotra, Deepika↗
DOE OSTI2020

Mapping the Temperature-dependent and network site-specific onset of spectral diffusion at the surface of a water cluster cage

We explore the kinetic processes that sustain equilibrium in a microscopic, finite system. This is accomplished by monitoring the spontaneous, time-dependent frequency evolution (the frequency autocorrelation) of a single OH oscillator, embedded in a water cluster held in a temperature-controlled ion trap. The measurements are carried out by applying two-color, IR-IR photodissociation mass spectrometry to the D3O+?(HDO)(D2O)19 isotopologue of the “magic number” protonated water cluster, H+?(H2O)21. The OH group can occupy any one of the five spectroscopically distinct sites in the distorted pentagonal dodecahedron cage structure. The OH frequency is observed to evolve over tens of milliseconds in the temperature range (90-120 K). Starting at 100 K, large “jumps” are observed between two OH frequencies separated by ~300 cm-1 indicating migration of the OH group from the bound OH site at 3350 cm-1 to the free position at 3686 cm-1. Increasing the temperature to 110 K leads to partial interconversion among many sites. All sites are observed to interconvert at 120 K such that the distribution of the unique OH group among them adopts the form one would expect for a canonical ensemble. The spectral dynamics displayed by the clusters thus offer an unprecedented view into the molecular-level processes that drive spectral diffusion in an extended network of water molecules.

Yang, Nan↗
NASA NTRS1987

The compressional ULF foreshock boundary of Venus - Observations by the PVO magnetometer

Entries and exits of the compressional magnetic wave segments of the Pioneer Venus Orbiter data are identified as crossings of a foreshock boundary. When these crossings are plotted in an appropriate coordinate system, they form scatter diagrams representing the geometry of a composite boundary covering all solar wind conditions of the sample. When the orientation of the boundary for the average interplanetary magnetic field direction at Venus is extracted, the boundary is similar, although not identical within present uncertainties, to that found for the analogous foreshock boundary of the earth.

Greenstadt, E. W.↗
DOE OSTI2022

Large-Area Periodic Arrays of Atomically Flat Single-Crystal Gold Nanotriangles Formed Directly on Substrate Surfaces

The advancement of nanoenabled wafer-based devices requires the establishment of core competencies related to the deterministic positioning of nanometric building blocks over large areas. Within this realm, plasmonic single-crystal gold nanotriangles represent one of the most attractive nanoscale components but where the formation of addressable arrays at scale has heretofore proven impracticable. In this work, a benchtop process is presented for the formation of large-area periodic arrays of gold nanotriangles. The devised growth pathway sees the formation of an array of defect-laden seeds using lithographic and vapor-phase assembly processes followed by their placement in a growth solution promoting planar growth and threefold symmetric side-faceting. The nanotriangles formed in this high-yield synthesis distinguish themselves in that they are epitaxially aligned with the underlying substrate, grown to thicknesses that are not readily obtainable in colloidal syntheses, and present atomically flat pristine surfaces exhibiting gold atoms with a close-packed structure. As such, they express crisp and unambiguous plasmonic modes and form photoactive surfaces with highly tunable and readily modeled plasmon resonances. The devised methods, hence, advance the integration of single-crystal gold nanotriangles into device platforms and provide an overall fabrication strategy that is adaptable to other nanomaterials.

42 ENGINEERING↗
DOE OSTI2021

AdS 3 gravity and random CFT

We compute the path integral of three-dimensional gravity with negative cosmological constant on spaces which are topologically a torus times an interval. These are Euclidean wormholes, which smoothly interpolate between two asymptotically Euclidean AdS 3 regions with torus boundary. From our results we obtain the spectral correlations between BTZ black hole microstates near threshold, as well as extract the spectral form factor at fixed momentum, which has linear growth in time with small fluctuations around it. The low-energy limit of these correlations is precisely that of a double-scaled random matrix ensemble with Virasoro symmetry. Our findings suggest that if pure three-dimensional gravity has a holographic dual, then the dual is an ensemble which generalizes random matrix theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Tutorial on forming through-silicon vias

Through-silicon vias (TSVs) are a critical technology for three-dimensional integrated circuit technology. These through-substrate interconnects allow electronic devices to be stacked vertically for a broad range of applications and performance improvements such as increased bandwidth, reduced signal delay, improved power management, and smaller form-factors. There are many interdependent processing steps involved in the successful integration of TSVs. This article provides a tutorial style review of the following semiconductor fabrication process steps that are commonly used in forming TSVs: deep etching of silicon to form the via, thin film deposition to provide insulation, barrier, and seed layers, electroplating of copper for the conductive metal, and wafer thinning to reveal the TSVs. Recent work in copper electrochemical deposition is highlighted, analyzing the effect of accelerator and suppressor additives in the electrolyte to enable void-free bottom-up filling from a conformally lined seed metal.

42 ENGINEERING↗
DOE OSTI2020

III/V silicon hybrid laser based on a resonant Bragg structure

We demonstrate a laser tunable in intensity with gigahertz tuning speed based on a III/V reflective semiconductor optical amplifier (RSOA) coupled to a silicon photonic chip. The silicon chip contains a Bragg-based Fabry–Perot resonator to form a passive bandpass filter within its stopband to enable single-mode operation of the laser. We observe a side mode suppression ratio of 43 dB, linewidth of 790 kHz, and an optical output power of 1.65 mW around 1530 nm. We also investigate using a micro-ball lens as an alternative coupling method between the RSOA and the silicon chip.

Davis, Jordan A. (ORCID:0000000343483295)↗
DOE OSTI2025

Rapid Oxidation of Uranium Steel Alloys: Combustion Synthesis

This project explored the use of combustion synthesis as a rapid, high-temperature method for oxidizing uranium-bearing steel alloys. Traditional laboratory-scale synthesis methods often fail to replicate the thermal and kinetic conditions experienced by real-world particulates, particularly those formed under rapid quenching or high-temperature scenarios. Combustion synthesis offers a promising alternative by enabling fast, localized heating and flexible precursor selection. A series of targeted experiments were conducted using a U 2 NiCrFe 4 alloy as the precursor. The alloy was oxidized using combustion synthesis reactions fueled by uranyl nitrate and glycine, achieving peak temperatures exceeding 1,200 °C. Postreaction analysis using scanning electron microscopy (SEM), elemental mapping, and Raman spectroscopy revealed the formation of iron-based oxides, with limited but detectable evidence of uranium oxide phases such as UO 2 . The results indicate that under the rapid reaction and cooling conditions of combustion synthesis, iron oxides form preferentially, but uranium oxide formation is kinetically limited. These findings validate combustion synthesis as a viable method for simulating the oxidation behavior of uranium steels in extreme environments and lay the groundwork for future studies aimed at enhancing uranium oxide formation through higher temperatures or modified precursor compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analysis of Long-Term Quality Control Data for a 137 Cs Dosimetry Calibration Source

Strict quality assurance programs are required for many radiological applications, but these seldom exist for verifying dosimetry calibration sources. After initial characterization of a dosimetry calibration facility, quality control procedures are recommended to ensure the early detection of any changes or malfunctions. These also result in refined knowledge about average dose rate and experimental variations in dose delivery. This paper describes the implementation of a phase I quality control protocol for a 137 Cs dosimetry calibration source and includes an analysis of the resulting data collected over a 24-mo period. During this time, substantial data was collected to establish trial control limits. Air kerma rate measurements were obtained using an ion chamber and were adjusted for decay, corrected for ambient temperature, pressure and humidity, and then analyzed using quality control charts. Three variations of rational subgrouping methods were used in order to find assignable causes of error, and Nelson's Rules were followed to detect any non-random statistical variations. Measurements were subgrouped according to same-day measurements in order to detect positional errors as well as atmospheric correction errors. Additionally, measurements were subgrouped according to analogous experimental setups in order to detect failure in equipment or incorrect settings. Both were analyzed using the X-bar and R chart method. Similarly, individuals and moving ranges charts were used to carefully examine each position in order to observe any situational errors that may occur which include timing, positional, or interference errors. Each method was successful in identifying unique out-of-control data points that occurred during the phase I application of forming control limits. Furthermore, over the 24-mo period, enough data points were deemed in-control to establish reliable trial limits. Future experiments will include the phase II application of gaining more reliable measurements in order to fine-tune the limits, as well as performing a designed experiment, where variables are purposefully changed in order to test the variation of the data.

61 RADIATION PROTECTION AND DOSIMETRY↗