Search NASA⌕ Search

SEARCH · Search NASA

Results for “OSCILLATION FREQUENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The Nature of Standing Plasma Waves Following Fast Breakdown in Thunderstorms

Narrow bipolar events (NBEs) are produced by large-scale systems of streamer corona discharges that occur inside thunderstorms and radiate intensely at very-high frequencies. Here we examine 14 high-power NBEs recorded in Florida which are followed by a lasting oscillatory signal. We isolate the dominant frequencies of the oscillations using empirical mode decomposition methods, and cross-reference this information with the radiator size inferred from broadband interferometry. We conclude that the oscillations are evidence of a standing electromagnetic wave in the plasma cavity created by the preceding streamer system, that is, the cavity's fundamental mode with wavelength equal to twice the radiator length. Contrasting the dispersive and attenuation properties of these waves across several different events allows us to conclude that the cavity is filled with ions resulting in an average conductivity of 0.01–0.1 mS/m, which are left behind after the streamers decay via electron attachment to oxygen molecules.

58 GEOSCIENCES↗
DOE OSTI2026

Nanoscale Compositional and Strain Gradients Enable High‐Speed and Amplitude‐Resolved Pyroelectric Sensing

The frequency response of pyroelectric sensors is fundamentally governed by thermal time constant (τth, determined by thermal mass and thermal conductance) and electrical impedance arising from film capacitance and readout circuit. Conventional bulk LiTaO3 detectors are optimized for high responsivity at low modulation frequencies (0.1-10 Hz), possessing a large τth that thermally averages rapid temperature oscillations at elevated modulation frequencies, limiting fidelity in resolving dynamic varying thermal signals. Here, compositional and strain gradients are introduced into 100-nm-thick relaxor-ferroelectric films reducing τth to ≈2 µs and producing built-in potentials (≈1.45 V or 145 kV cm-1) that enhance the pyroelectric coefficient and suppress the dielectric constant. This enables complementary dual-mode operation by enhancing current-mode electrical responsivity and improving the voltage-mode figure of merit - advantageous for superior temperature resolution (ΔTmin ≈ 30 µK). The responsivity peak shifts to near 1 kHz (>2500-times higher than conventional bulk sensors), with measurable responsivity extending to a carrier frequency of 100 kHz and amplitude-resolved detection at modulation frequencies up to 15 kHz. These results establish nanoscale internal-field engineering can reshape electro-thermal trade-off in pyroelectric thin films toward zero-bias, high-thermal-sensitivity, and amplitude-resolved thermal sensing across a wide frequency bandwidth.

Lin, Ching‐Che↗
DOE OSTI2024

Recalibration of missing low-frequency variability and trends in the North Atlantic Oscillation

Abstract Multi-decadal trends in the wintertime North Atlantic Oscillation (NAO) are under-represented by coupled general circulation models (CGCMs), consistent with a lack of autocorrelation in their NAO index series. This study proposes and tests two simple “reddening” approaches for correcting this problem in simulated indices based on simple one parameter short-term (AR; Auto-Regressive order 1) and long-term (FD; Fractional-Difference) time series filters. Using CGCMs from the Coupled Model Intercomparison Project Phase 6 (CMIP6), the FD filter successfully improves the autocorrelation structure of the NAO, and in turn the simulation of extreme trends, while the AR filter is less successful. The 1963–1993 NAO trend is the maximum 31-year trend in the historical period. Raw CGCMs underestimate the likelihood of this trend by a factor of ten but this discrepancy is corrected after reddening. CMIP6 future projections show that long-term (2024–2094) NAO ensemble mean trends systematically increase with the magnitude of radiative forcing: -2.4 to 3.5 hPa/century for low-to-high forcing after reddening (more than double the range using raw output). The related likelihood of future maximum 31year trends comparable to 1963–1993 ranges from 3 to 7% whereas none of these CMIP6 projections simulate this without reddening. Near-term projections of the next 31 years (2024–2054) are less sensitive than long term trends to the future scenario, showing weak-to-no forced trend. However, reddening increases the ensemble range by 74% (to +/-1 standard deviation/decade), which could increase/decrease regional climate change signals in the Northern Hemisphere by magnitudes that are underestimated when using raw CGCM output.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

Electronic structure of the kagome metal YbTi 3 Bi 4 studied using torque magnetometry

This study investigates the electronic structure of the kagome metal YbTi 3 ⁢Bi 4 using high-field torque magnetometry. The torque signal measured at a maximum field of 41.5 T reveals clear de Haas–van Alphen (dHvA) oscillations with a major frequency peak at F δ ~ 130 T. By rotating the sample at various tilt angles Θ, we observed that F δ exhibits a nearly 1/cos⁡Θ dependence, indicating the presence of a quasi-two-dimensional (2D) Fermi surface (FS) in YbTi 3 ⁢Bi 4 . This argument is further supported by the detection of a forward-leaning, sawtoothlike waveform in the dHvA effect, a hallmark of 2D FS characteristics. Notably, we identified two high-frequency peaks near F χ ~ 1900 T and F λ ~ 5600 T; however, these peaks quickly disappear at Θ greater than 21°. To better understand experimental observations, we computed the electronic band structure and FS using ab initio density-functional theory (DFT). The electronic bands reveal the presence of several Dirac points, flat bands, and van Hove singularities near the Fermi level. Five bands cross the Fermi level and contribute to the FS of this material. The FS comprises cylindrical sheets, with theoretical frequencies from the FS pockets aligning well with the experimental dHvA frequencies. Several FS parameters characterizing F δ were determined by analyzing the temperature and field dependence of the dHvA oscillations using the Lifshitz-Kosevich theory. Further, the detailed electronic properties presented in this work provide critical insights into the electronic structure of YbTi 3 ⁢Bi 4 and other titanium-based kagome compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Vasomotion in Human Fingers

Introduction: We describe methods by which vasomotion can be recorded in awake and anesthetized human subjects without significant interference from other spontaneous vascular oscillations. Methods: In three separate studies, we used photoplethysmography (PPG) to record vasomotion in fingertips. In Study 1, we induced chemical sympathectomy in the studied hand of 11 awake subjects who received intravenous dexmedetomidine infusions. In Study 2, we administered four progressively increasing intravenous dexmedetomidine infusions to 16 awake volunteers. In Study 3, we recorded vasomotion simultaneously from 6 fingers of 7 patients who were under dexmedetomidine-based anesthesia. Five-minute epochs of PPG recordings that displayed slow vascular oscillations were analyzed for frequency and amplitude. Results: In Study 1, vasomotion frequencies were 0.025 ± 0.008 Hz. In Study 2, vasomotion frequencies were 0.033 ± 0.006 Hz, and 0.032 ± 0.008 Hz during the two highest dexmedetomidine infusion steps. In Study 3, vasomotion frequencies ranged from 0.020 to 0.037 Hz and were observed in all 6 fingers, with no synchrony between the six fingers. Conclusion: The vascular oscillations we observed without significant interference from other spontaneous oscillations are independent of neural activity (Study 1), local in nature (Study 3), and associated with alpha-2-adrenoceptor activation, consistent with known properties of vasomotion.

Cardiovascular System & Cardiology↗
DOE OSTI2026

Small-Signal Analysis of Current-Limiting Grid-Forming Inverters

Grid-forming (GFM) inverters are equipped with a current limiter to protect the device during grid disturbances. Because the intervention of the current limiter can compromise the transient stability of the GFM inverter, various types of current limiter designs and additional frequency-stabilization control methods have been proposed in recent literature to aid in transient GFM inverter stability; however, the small-signal stability implications of adding these additional control blocks during, in particular, off-nominal conditions are not fully understood. To address this challenge, this paper presents a generic small-signal model of a GFM inverter that incorporates various types of current limiters and frequency stability-enhancing controls. With the proposed model, we analyze the root causes of inverter instability, which reveals two critical design trade-offs. First, due to current-limiter engagement caused by a disturbance, the GFM inverter dynamics are altered, which can lead to voltage oscillations. Second, additional frequency-stabilization controls can improve the small-signal stability of the GFM inverter, but at the cost of reduced power and voltage support to the grid. Comprehensive hardware experiments validate the theoretical concept and analysis. The findings in this work underscore the importance of incorporating both transient-response and small-signal dynamics requirements into the design procedure of GFM current limiters and frequency-stabilization controls.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Materials Selection Principles for Designing Electro‐Thermal Neurons

Artificial neurons exhibiting volatile threshold switching and action potential‐like oscillations are crucial for brain‐inspired computing. While Complimentary Metal‐Oxide‐Semiconductor (CMOS)‐based strategies require hundreds of transistors to simulate each neuron, neuronal oscillations arise spontaneously in individual electro‐thermal devices due to nonlinearities like the Mott transition in VO 2 . Despite improved understanding of the physics, quantitative connections between neuronal performance and material properties remain under‐explored, preventing predictive neuron design and rational materials selection. In this work, a physics‐aware forward design methodology is developed for interrogating a wide palette of materials with properties varying by orders of magnitude, and their performance (high frequency, high dynamical reconfigurability and low power) under external circuit and device geometry constraints is assessed. The space of viable materials is identified to be much larger than previously recognized, with candidates from a range of materials classes, including Ge, GaP and MoS 2 . CMOS‐compatible performance (such as 100 GHz oscillating frequencies) can be achieved with CMOS‐compatible node sizes (≈10 nm). Finally, combinations of material properties yielding desired neuronal performance under uncertain design constraints are considered. This work solidifies forward design principles for electro‐thermal neuron devices, a necessary pre‐condition for inverse design from desired neuronal performance to required materials properties.

compact model↗
DOE OSTI2025

Comparative Analysis of Inter-Area Oscillations in the US Eastern and Western Interconnections

This paper presents a comparative analysis of interarea oscillations in the US Eastern and Western Interconnections using frequency disturbance data collected from the advanced wide-area Frequency Monitoring Network (FNET/GridEye), enabling us to investigate and compare the oscillation characteristics of both regions. The study analyzes the statistical data from the two interconnections, including total oscillation events, average dominant frequencies, damping ratios, and maximum amplitudes. We also explore the impact of seasonal and daily variations on oscillation occurrences and the influence of different grid topologies and operational practices. The results provide insights into both interconnections' stability and control characteristics, offering valuable information for power system operators to enhance grid stability and oscillation suppression measures.

Fu, Hao [University of Tennessee, Knoxville (UTK)]↗
DOE OSTI2024

Environmental damping and vibrational coupling of confined fluids within isolated carbon nanotubes

Abstract Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum. An analysis based on a harmonic oscillator model assigns the distinctive frequency cusp, produced over 93 scans of 3 distinct DWNTs, along with the hyperbolic trajectory, to a reversible increase in damping from graphitic ribbons on the exterior surface. Strain-dependent coupling from self-tensioned, suspended DWNTs maintains the ratio of spring-to-damping frequencies, producing a stable saturation of RBM in the low-tension limit. In contrast, when the interior of DWNTs is subjected to a water-filling process, the RBM thermal trajectory is altered to that of a Langmuir isobar and elliptical trajectories, allowing measurement of the enthalpy of confined fluid phase change. These mechanisms and quantitative theory provide new insights into the environmental coupling of nanomechanical systems and the implications for devices and nanofluidic conduits.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bulk viscosity of two-flavor color superconducting quark matter in neutron star mergers

This work investigates the bulk viscosity of warm, dense, neutrino-transparent, color-superconducting quark matter, where damping of density oscillations in the kHz frequency range arises from weak-interaction-driven direct Urca processes involving quarks. We study the two-flavor red-green paired color-superconducting (2SC) phase, while allowing for the presence of unpaired strange quarks and blue color light quarks of all flavors. Our calculations are based on the SU(3) Nambu–Jona–Lasinio model, extended to include both vector interactions and the ‘t Hooft determinant term. The primary focus is on how variations in the NJL Lagrangian parameters—specifically, the diquark and vector coupling strengths—affect both the static properties of quark matter, such as its equation of state and composition, and its dynamical behavior, including bulk viscosity and associated damping timescales. We find that the bulk viscosity and corresponding damping timescale can change by more than an order of magnitude upon varying the vector coupling by a factor of two at high densities and by a lesser degree at lower densities. This sensitivity primarily arises from the susceptibility of 2SC matter, with a smaller contribution from modifications to the weak interaction rates. In comparison, changes in the diquark coupling have a more limited impact. The damping of density oscillations in 2SC matter is similar quantitatively to nucleonic matter and can be a leading mechanism of dissipation in merging hybrid stars containing color superconducting cores.

Gravitational Waves↗
DOE OSTI2026

Subseasonal Tropical Convection Characteristics in the Energy Exascale Earth System Model Version 2

Accurate simulation of subseasonal tropical moist convection remains a key challenge for Earth system models. The difficulties stem from the reliance of cumulus cloud processes on model parameterizations and the need to represent the multiscale nature of interactions among clouds, radiation, moisture, circulation, and surface energy fluxes. Equatorial convection drives circulation anomalies that can affect weather patterns and extremes globally, motivating efforts to better understand and simulate these tropical disturbances. Here, a detailed review of subseasonal tropical convective behavior as simulated in the Energy Exascale Earth System Model version 2 (E3SMv2) is presented, with comparison to its predecessor version 1 (E3SMv1) and reference data sets. Model structural changes to the deep convective trigger function and surface fluxes, along with parametric tuning of the cloud and microphysics schemes, together result in an improved depiction of organized tropical convection across scales. In particular, E3SMv2 exhibits a more realistic Madden‐Julian oscillation (MJO) and low‐frequency Kelvin waves—owing to a sharper time mean equatorial meridional moisture gradient and improved convection‐circulation coupling —as well as a better depiction of MJO Northern Hemisphere teleconnections. Despite these improvements, subseasonal precipitation variance continues to be strongly underestimated in E3SMv2. Use of a cloud plume model also reveals that the coupling between daily averaged tropical precipitation and lower tropospheric instability in E3SM is inconsistent with observations, a bias that could potentially impact the simulation of intraseasonal disturbances.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Electronic structure of the kagome compound CaTi 3⁢ Bi 4 using high-field torque magnetometry and density functional theory

Here, we report systematic torque magnetometry measurements to investigate the electronic properties of the newly discovered kagome compound CaTi 3 ⁢Bi 4 . Electrical transport, magnetic susceptibility, and thermal measurements reveal no evidence of a magnetic ground state in this material. Torque data obtained in magnetic fields up to 41.5 T exhibit clear de Haas–van Alphen (dHvA) oscillations, with nine distinct frequencies ranging from 13 to 6164 T. Angular-dependent dHvA measurements show that, with the exception of the lowest frequency (13 T), all observed frequencies nearly follow a 1/cos ⁡𝜃 dependence, where 𝜃 is the angle between the crystallographic 𝑐 axis and the magnetic field direction. This behavior is characteristic of quasi-two-dimensional Fermi-surface sheets with nearly circular cross sections. To further elucidate the electronic structure, we performed density functional theory (DFT) calculations of the band structure and Fermi surface. The calculated bands reveal the presence of multiple Dirac points (DP), flat bands (FB), and van Hove singularities (VHS) near the Fermi level. The resulting Fermi surface consists of several quasi-two-dimensional cylindrical sheets, consistent with the experimentally observed 1/cos⁡ 𝜃 dependence. Notably, the theoretical dHvA frequencies, derived from extremal Fermi-surface cross-sectional areas, agree well with the experimental values and reproduce their angular dependence. Remarkably, all experimentally observed frequencies are captured by the DFT predictions. Pressure-dependent calculations up to 10 GPa show that the electronic features—DP, FB, and VHS—evolve systematically with pressure. In particular, the VHS shifts closer to the Fermi level, demonstrating that pressure acts as an effective tuning parameter in this material. These combined experimental and theoretical results provide a comprehensive understanding of the electronic structure of CaTi 3 ⁢Bi 4 and demonstrate how pressure can be used to tune its key electronic features, offering valuable guidance for exploring related kagome materials.

Shtefiienko, Kyryl [West Texas A & M University, C↗
DOE OSTI2024

Grid-Forming Storage Networks: Analytical Characterization of Damping and Design Insights

Grid-forming storage resources are critical to the operation of power grids with high renewable penetration. Over the years, there has been considerable emphasis on understanding the benefits these inverter-based storage resources bring towards managing volatility and enhancing grid reliability but little is studied about the supplementary advantages latent in their operation. This paper investigates one such application in which we explore the impact of grid-forming distributed storage in damping low-frequency inter-area oscillations. We present a detailed analysis characterizing the impact of inverter-droop and storage size on the slower eigenvalues, highlighting potential design considerations for enhancing system stability.

Chatterjee, Kaustav [BATTELLE (PACIFIC NW LAB)] (O↗
DOE OSTI2025

Ultrafast-induced coherent acoustic phonons in the two-dimensional magnet CrSBr

Magnetism in two-dimensional (2D) van der Waals (vdW) crystals offers promising new directions for low-dimensional physics and devices. In this work, mega-electron volt (MeV) ultrafast electron diffraction was employed to investigate the ultrafast atomic dynamics of a novel, 2D vdW magnetic single-crystal CrSBr. Femtosecond (fs) optical pump pulses excited non-equilibrium atomic displacements shown to be coherent acoustic phonons (CAPs). Phonon frequencies were extracted by analyzing oscillations of different Bragg peak (BP) intensities and were determined to be GHz acoustic disturbances that propagated as strain waves. Phonon modes exhibit anisotropy with respect to the a and b crystal axes. Subharmonic phonon frequencies were also observed, and this provided a signature of nonlinear oscillatory coupling between the laser-induced pumping phonon frequency and secondary phonon frequencies. Thus, CrSBr was found to serve as a nonlinear phononic frequency converter. The ultrafast time dependence of the Bragg intensity was simulated by incorporating an oscillating deviation parameter ansatz into expressions for the dynamical scattering intensity yielded excellent modeling of the ultrafast structural dynamics of the photo-excited 2D crystal. Our work provides a foundation for exploring how fs light pulses can influence phonon dynamics in materials with strong spin-lattice coupling. These results suggest that CAPs can match the magnon frequencies and show the promise of CrSBr for use in optical-to-microwave transducers and phononic devices.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Qubit-state purity oscillations from anisotropic transverse noise

We explore the dynamics of qubit-state purity in the presence of transverse noise that is anisotropically distributed in the Bloch-sphere X Y plane. We perform Ramsey experiments with noise injected along a fixed laboratory-frame axis and observe oscillations in the purity at twice the qubit frequency arising from the intrinsic qubit Larmor precession. We probe the oscillation dependence on the noise anisotropy, orientation, and power spectral density, using a low-frequency fluxonium qubit. Our results elucidate the impact of transverse noise anisotropy on qubit decoherence and may be useful for disentangling charge and flux noise in superconducting quantum circuits. Published by the American Physical Society 2025

Rower, David A. (ORCID:0000000328455616)↗
DOE OSTI2025

Electrical Detection of Spin-Hall-Induced Auto-oscillations in Lithium Aluminate Ferrite Thin Films

Ferrimagnetic insulators with ultralow damping are of great interest for their potential applications in energy-efficient computing devices. Here, we report the direct electrical detection of magnetic auto-oscillations in unpatterned ultralow damping ferrimagnetic insulator epitaxial Li 0.5 Al 0.5 Fe 2 O 4 thin films, driven by a current in a proximal Pt nanowire. Auto-oscillations occur for only one current polarity, consistent with the spin-Hall effect inducing the oscillation state. Micromagnetic modeling shows good agreement with the experimental frequency and field dispersions, showing only one dominant oscillation mode, in contrast to the multiple modes typically observed in transition-metal nanowire-type spin-Hall nanooscillators. This study illustrates a new material system for neuromorphic computing and magnonics, a simple material platform with the direct-current generation of high-frequency (~10 GHz) signals and their electrical detection.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fermi surface topology and magnetotransport properties of superconducting Pd 3 Bi 2 Se 2

Pd 3 Bi 2 Se 2 is a rare realization of a superconducting metal with a non-zero topological invariant. Here, in this study, we report the growth of high-quality single crystals of layered Pd 3 Bi 2 Se 2 with a superconducting transition at T c ≈ 0.80 K and upper critical fields of ~10 mT and ~5 mT for the in plane and out-of-plane directions, respectively. Our density functional theory (DFT) calculations reveal three pairs of doubly degenerate bands crossing the Fermi level all displaying clear three dimensional dispersion consistent with the overall low electronic anisotropy (<2). The multiband electronic nature of Pd 3 Bi 2 Se 2 is evident in magneto-transport measurements, yielding a sign changing Hall resistivity at low temperatures. The magnetoresistance is non-saturating and follows Kohler’s scaling rule. We interpret the magneto-transport data in terms of open orbits that are revealed in the DFT calculated Fermi surface. de Haas-van Alphen (dHvA) oscillation measurements using torque magnetometry on single crystals yield four frequencies for out-of-plane fields: F α = (150 ± 26) T, F β = (293 ± 10) T, F γ = (375 ± 20) T and F η = (1017 ± 12) T, with the low frequency dominating the spectrum. Through the measurement of angular dependent dHvA oscillations and DFT calculations we identify the F α frequency with an approximately ellipsoidal electron pocket centered on the L 2 point of the Brillouin zone. Lifshitz-Kosevich analysis of the dHvA oscillations reveals a small cyclotron effective mass m* = (0.11 ± 0.02)m 0 and a nontrivial Berry phase for the dominant orbit. The presence of nontrivial topology in a bulk superconductor positions Pd 3 Bi 2 Se 2 as a potential candidate for exploring topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Wideband Impedance Passivation of MMCs for Suppressing Harmonic Oscillations

Harmonic instability and associated oscillation events have become one of the main concerns in MMC-based HVdc systems. These oscillations can appear in the range from a few hundred hertz to several kilohertz, and the root cause is identified as delay-induced negative damping of MMC impedance appearing at the system resonance frequency. Here, this paper introduces a wideband impedance reshaping method through MMC control to eliminate such negative damping for both grid-following (GFL) and grid-forming (GFM) MMCs, which makes the MMC impedance completely passive from the second harmonic frequency upward, thus preventing all harmonic oscillations. First, simplified impedance models of MMCs are derived for the harmonic stability analysis and the impedance reshaping control design. Next, a passivity-based impedance reshaping method is presented, as well as practical considerations for its implementation. In addition, to maintain the MMC's disturbance ride-through capability, an adaptive activation scheme is developed, which enables the wideband impedance reshaping control only in the presence of harmonic oscillation events. The effectiveness of the proposed method is validated by frequency domain analysis and by electromagnetic transient (EMT) simulations of two typical MMC-based power systems.

17 WIND ENERGY↗